AutoComplete does not SOLVED

Similar Questions

• AutoComplete does not work on the address field.

  AutoComplete does not work on the address field. This means that the completed form is missing from the address. What is special about the address field and why doesn't autocomplete work? I have NOT opted for "don't follow it.

  http://www.thepetitionsite.com/TakeAction/918/708/047/

  Hi robmm76. I looked at the link you provided. It seems that the reason why AutoFill does not work for the address field is because of the way this field has been programmed on the site. It has been programmed to make type you part of your address and click on the right pair and it would then fill in city, State and zip code. If this field is just a special case.

  I hope this information answers your question. If you need more information or help please do not hesitate to reply to this reply.

• broken HTTPS on my (and only me, no other ppl) FF ver v35, v29, v3.6.28. reinstalling does NOT solve. Any ideas?

  Broken FF after my windows infected by the virus userinit. The virus is eliminated, but FF has always fought in https and uninstall/reinstall does not solve https broken

  RobertHarper said

  Broken FF after my windows infected by the virus userinit. The virus is eliminated, but FF has always fought in https and uninstall/reinstall does not solve https broken

  In response to my own question: 5 months later, https started working again WITHOUT having done anything - don't reinstall, no upgrade, cache clears. Nothing. FF is more respectful of my 2 GB RAM PC Chrome, so it's nice to have FF works again. HTTPS work is essential for many sites these days.

• I put my yahoo homepage, but every time I open mozilla home page is webssearches I reset firefox, but it does not solve the problem, what to do now?

  My homepage is set to yahoo, but mozilla opens with http://istart.webssearches.com as start page. Same reset does not solve the problem. I think that I have installed a software that installed this. My default search engine is Google. Kindly help me, is there something to do in all: config?

  See this tutorial - http://malwaretips.com/blogs/istart-webssearches-com-removal/

• When I launch Firefox, I get only the bottom of my browser in the Firefox window. I have already reinstalled it, but it does not solve the problem.

  When I launch Firefox, I get only the bottom of my browser in the Firefox window. I have the normal window for 1 second, but it changes in the background window only. So, without the toolbar or navigation. I have already reinstalled it, but it does not solve the problem.

  Hello jonson00, please follow the troubleshooting steps in Firefox opens with a white or transparent window. If this solves the problem, it would be also interesting including the extension has a problem in your case. Thank you!

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• AutoComplete does not work on certain forms

  I read the help article indicated this:

  > AutoComplete does not work on certain forms

  > If you find that Firefox will save the form entries for forms on some Web sites only, but not on others, the site may be say Firefox does not save form history. This is especially common on email and Bank Web sites.

  But I want to save the information for some of these sites. How can I manually enter the information, so that Firefox it tells when I navigate? Is this possible?

  This bookmarklet makes the browser ignore autocomplete = "off" temporarily, allows to save passwords even on sites that use autocomplete = "off". Should work the same for the form data.

  Don't forget to bookmark password:
  https://www.squarefree.com/bookmarklets/forms.html#remember_password

• Can I uninstall Firefox if I don't like it or it does not solve the problem of ware ad that I have with IE 8.0?

  I have not yet installed Firefox 3.6. Can I uninstall it if it does not solve my problem of security (to be balanced of the ebay login page to a page of nonsense asking me to name, map of credit etc.) on IE 8.0.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0 .NET CLR 1.0.3705 .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

  Jim, Yes, Firefox can be uninstalled just like any other Windows application can be uninstalled.

  See Uninstall Firefox on your computer.

• Please I can't change my email address for Windows Developer Preview... I tried to go to the user acct and change the credentials, but it does not solve

  When I installed Windows Developer Preview two days ago, I hastily added an email that was not common. They said I could change later. I went to windows live Essentials/Director and enacted a replacement acct win/live/hotmail and changed the address of electronic mail by default, but my computer continues to insist that I have connect and wants me to use the original yet? Please, I can't change the email address of systems... I tried to go to the user acct and change the credentials, but it does not solve >?

  Now, whenever I try to it is said I forgot to sign in. and fills in the wrong address and wants to give me the password but I sure can't find a code to go with this ACCT... wants the past for this account? sign in? IDK... Please help = |

  Thank you both... I had to reinstall the drive, also I have re-installed the vista I have to files, Shell said, it must use to install on a system. It works now. I was in contact with the forum Dev =.) see you soon

• Volume D: is dirty. Check Disk Local Disk d does not solve the problem

  Whenever I start my computer under WindowsXP SP3, chkdsk runs indicating that the D: Volume is dirty.  He noted no other problems.  I tried to run check disk Local Disk d with two checked options, but it does not solve the probem.  What should I try next?

  That is right.

  First of all, let us look at the ideas of the Microsoft support engineer:

  I would never not follow the suggestion of Microsoft Engineer in method 1.  This idea makes no sense.

  The Microsoft Support Engineer method 2 does not work for you (or most people), unless you have a XP installation CD bootable authentic with the same Service Pack as your installation.  In your case, you would need a true bootable XP with SP3 installation CD and most of the people do not have such an animal.  It is therefore extremely unlikely that will help you at all - and if your file system is damaged or dirty, I of course never suggests that in the first place until your file system is straightened.

  Volumes that contain file system errors is known as "Sales". When a volume is dirty, he has known file system errors, and you must run chkdsk on the volume to repair the problem.

  When XP starts, it automatically checks the on each volume's dirty bit (C, D, E, etc.), and if any volume is dirty, XP will automatically run chkdsk/p on next reboot on the volumes in an attempt to clear the dirty bit.  Which does not clear the bit of impurity or it may take several passes.

  If the volume dirty bit, one is set, this indicates that the file system may be in an inconsistent state. The dirty bit can be set because the volume is online and has some remarkable changes, because changes have been made to the volume and the computer shutdown until the changes have been committed to disk, or because corruption has been detected on the volume. If the dirty bit is set when the computer restarts, chkdsk runs to verify the consistency of the volume.

  Whenever you start a computer that is running one of the Windows XP operating system or the Windows Server 2003 family, autochk.exe is called by the kernel for all volumes to check if the volume dirty bit is set. If the dirty bit is set, autochk performs an immediate chkdsk /f on that volume. Chkdsk /f verifies file system integrity and attempts to fix any problems with the volume.

  A simple power interruption is something that could result in a disc was marked as dirty.  Have you had a power failure these days?

  You can query the dirty bit on a volume from the command prompt window.  Here's how:

  Click Start, run and enter in the box:

  cmd

  Click OK to open the command prompt window.

  For example, to query the bit of impurity on drive D, type:

  fsutil dirty query D:

  The sample output:
  Volume D: is dirty
  Volume D: is not dirty

  Type "exit" to close the command prompt window.

  You can not enter any command to clear the dirty bit - only chkdsk /r or chkdsk/p can clear the dirty bit.

  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you decide to schedule the chkdsk with error correction during the next reboot, the results appear in the viewing Application event log.  You should look there for the chkdsk log to see what happened and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Date: 04/08/2010
  Time: 11:25:57
  Description:
  Checking file system on C:

  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.

  Windows will now check the disk.

  Cleaning of minor inconsistencies on the drive.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  28017948 KB in 100571 files.
  56540 Ko 10556 index.
  0 KB in bad sectors.
  236440 KB in use by the system.
  65536 KB occupied by the log file.
  10759120 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  2689780 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  The dirty bit fade not until chkdsk /r (or chkdsk/p) tracks clean when the system reboots (as in the example) or when you run chkdsk /r from the XP Recovery Console.

  Many times, the best remedy is to just run chkdsk /r from the XP Recovery Console so you can actually see what it does.  Sometimes, this also seems to be the only way to clear the dirty bit and this way you can see what he does.

  Note that you can not also question the bit of impurity of the Recovery Console and you can't turn off the bit of impurity to enter any command.

  If for some reason chkdsk will not erase the dirty, you can simply say XP never check the volume dirty bit, but who will not fix your fault of potentially hard drive, or it could be the drive just need to have chkdsk run on that (sometimes you need to run it more than once) or you will have to think about replacing the drive.

  If you have a genuine XP bootable installation CD, you can boot into XP from that (even a SP2) Recovery Console CD will work and run chkdsk /r manually from there and repeat until chkdsk /r is clean.

  If you have a genuine XP bootable installation CD, say so and I'll post instructions so you can make a CD of XP Recovery Console and how to run chkdsk from there.   There is no required XP media.

  I wonder why it is that I have never see an engineer Microsoft Support post instructions on how to make a bootable CD of XP (no XP media required) Recovery Console... probably because there is no KB article for them to post.

• Unrecognized 8 GB SDHC card & the patch (KB934428) does not solve the problem.

  I have a CoreMicro SDHC 8 GB card for my new camera from Pentax but my HP computer (running Windows XP SP3, with 5 built in card reader) will not recognize it.  I loaded the patch (KB934428) but it does not solve the problem.  Please help me solve this problem.

  Hello Semmony,

  Thank you for your message.  Check the HP website for the latest driver for your card reader.  If a driver later is available, download and install it.  Please let us know the result.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player 11 lost all sound. Reinstalling does not solve. Uninstall does not uninstall.

  Windows Media Player 11 lost all sounds (after a defrag?) Reinstalling does not solve. Impossible to uninstall before reinstalling (gives only a rellback from 11 to 11). Sound works fine on other programs.
  The value OK volume control.

  Hello KenLW,

  Thank you for your message.  It does not sound like one or several files in Media Player have been corrupted, uninstall and reinstall should solve the problem.  Uninstall Windows Media Player 11 can be a difficult process.  Click HERE for instructions on how to uninstall WMP11.
  Please let us know if it did or did not resolve the issue.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Computer freezing and startup repair does not solve the problem.

  fix my computer when windows start dump then launch startup, but does not solve the problem. Can you help me solve the problem

  Hi Wwiese,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the problem, the computer freezes in the commissioning on the Windows 7 computer.

  I would appreciate if you can help me with the following information.

  1 were there any hardware or software changes made on the computer before this problem?

  2. are you able to boot into office?

  3. you receive an error message/code?

  I suggest you try these methods and check if it helps.

  Method 1

  Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then download drivers software updated for this particular device.

  Method 2

  Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration

  http://Windows.Microsoft.com/is-is/Windows7/using-last-known-good-configuration

  Method 3

  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Step 1

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 4

  If the problem persists, I suggest you perform a startup repair and check if it makes a difference.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  In addition, you can do a System Restore the Windows Recovery Console.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Notice of missing components of applications. Reinstalling does not solve the problem

  Failed to move files from lightroom to photoshop. Download "among application components are missing from the application directory. Please reinstall the application. Reinstalling does not solve the problem. "Edit in photoshop" not effective

  Hello williamj,.

  Please use clean tool to uninstall the application-

  https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html

  see the help document for install it again-

  https://helpx.Adobe.com/creative-cloud/help/manage-apps-services-desktop.html

  You can also check I get a message "among application components are missing from the application directory, please reinstall the application. .

  Let us know if that helps.

  Kind regards

  Mohit

• I receive I/O-ERROR in bridge CC when I try to access the outputmodule. I have instaled the wersion more recent module, but it does not solve the problem. What should do?

  I receive I/O-ERROR in bridge CC when I try to access the outputmodule. I have instaled the wersion more recent module, but it does not solve the problem. What should do?

  reset your preferences: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html