AutoCorrelate not found in the DLL

Similar Questions

• ADVAPI32. DLL - the entry point of procedure not found in the dll

  I just updated my OS from Win XP x 64 for Win 7 x 64. On my XP, I had a program called VVD works just fine. The software is protected by HASP device.

  When you install the VVD on my new operating system, at the end of the installation, an error message comes up with the title "ADVAPI32.dll" followed with a red circle with a white "x" mark and text "the entry point of procedure not found in the dll."

  According to the Publisher of the software, the program is running (and install) free disorder on many machines x 64 Win7 so there must be something special on my PC.

  Shoul, I try to replace the file? How do I do that?

  Any help is greatly appreciated.

  Hello.

  I just did a clean boot and tried to install the software. I got the same message: "the procedure not found in the dll entry point." This message appears at the end of the installation during "update system configuration. Please wait. »

  I don't think that I have no viruses. I run Microsoft Security Essentials on my machine. In addition, installation also failed on two other Win7 computers with the same message. I tried to install the software in all kinds og compatibility modes but keep getting the same exact message. Is there another way/method I could use to isolate the problem?

  The problem is now resolved after SafeNet has released a new version og the pilot.

  Thank you for the effort.

• LR 6 no longer starts. (__crtCreateSymbolicLinkW not found in the DLL MSVCP110.dll).

  After the installation of 12 items, PS and Cyberview (both was delivered with a scanner) LR 6 unbootable.

  (__crtCreateSymbolicLinkW not found in the DLL MSVCP110.dll).

  

  Any ideas?

  Hello

  Please remove/repair all Microsoft Visual C++ Redistributable from the control panel

  Here is the screenshot how they will look

  

  and then reinstall the Microsoft Visual C++ Redistributable for 2012 and other

  from the below link

  Download Packages redistributable Visual C++ to Visual Studio 2013 of the official Microsoft Download Center

  ~ Assani

• Bridge.exe - not found entry point can access procedural _crtCreateSymbolicLinkW not found in the DLL C: \ Program Files (x 86)------Norton360------engine64------22.5.5.15------MSVCP110.dll

  Windows 10

  Fred for my English. I I would like to translate by Google

  Norton software has been re- installation is needed. No solution.

  When starting up pictures through Adobe Bridge , the following message : Bridge.exe - entry point not found

  Can access procedural _crtCreateSymbolicLinkW not found in DLL C: \ Program Files (x86) \ Norton360 \ engine64 \ 22.5.5.15 \ MSVCP110.dll

  This also happens when I start Adobe Bridge directly

  On the Internet, has found the solution.

  The average of MSVCP110.dll file in windows / system32, replaced by the file MSVCP110.dll to C:-Program Files (x 86)------Norton360------engine64------22.5.5.15------MSVCP110.dll

  The file in Windows was older

• Reminder of control not found in the DLL

  I write a DLL for use in TestStand using panels in a .uir file. Callbacks for controls are in the source file for the DLL. In another DLL function, I call LoadPanel to put the Panel in memory and I get an error saying: he cannot find the callback function to the controls on the Panel.

  I am at a loss as to why this is happening. The prototype of the function is in the header generated from the .uir file. This file is included in my DLL source file and callbacks for all controls are also in the DLL source file. Everything compiles fine, it fails at run time.

  Am I missing something here? I used the UI stuff in DLLs before and don't remember ever having this problem.

  I use CVI 7.1.1 and TestStand 3.1 (mandated by Government subscriber).

  
  

• error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

  I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

  These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

  • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
  • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  where the name of the Program Files folder may vary depending on the region.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• W2K & Flash install - SetDllDirectoryW is not found in the KERNEL32.dll dynamic link library.

  fully patched W2000 SP4 - try to install or update flash adobe gives "the procedure point SetDllDirectoryW entry is not found in the dynamic library KERNEL32.dll." said ths for both FF and IE versions of the flash Installer... it just started recently... at least since the beginning of 2012... mcafee or norton stuff has never been near this box... This is (vascular) limited to install or update flash...

  NOTE: had to choose ' Other/unknown' for windows option version in these forums, because some spark deletion of the option "Windows 2000":? :(

  I'll just post a link to workarounds to the case where someone else wants:

  http://forums.Adobe.com/thread/965334

  Because Windows 2000 is out of support and has had no updates Microsoft security since July 2010, I'm puzzled why people are so concerned about having a Flash Player update. The exploits are likely to be totally confused.

• Error message "5377 xlive.dll" not found in the library link when trying to play F1 2011

  Original title: f1 2011 5377 xlive.dll error

  Hello
  When I opened f1 2011 the game it gives message not found 5377 xlive.dll in the liberary link.
  and I try a lot of things
  1. install games for windows marketplace and to update
  2 - Download the xlive.dll file and located in System 32 and the game folder
  3. use the command prompt start menu

  so I tried my best and I need your advice...
  Thank you

  Hello

  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?

  Put the computer to boot and see if it helps.
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Note: follow step 7 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/929135

  Note: follow step 4 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/310353

  Hope this information helps.

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  What is apsGetReady?     Do I need?   If yes how can I do?  If this is not the case, how can I remove the window error message.

  """""""""""""""""""""""""""""""""""""""""""'''

  Wzcsldr2.exe found entry point

  the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  """"""""""""""""""""""""""""""""""""""""""""""""

  Hello

  1. When you receive this error message?
  2. you did it before the issue of any material changes or software?
  3. what service pack and antivirus are installed on your system?
  4. What is the brand and model of the router you are using to connect to the Internet/network

  5 are you facing problems to connect to the Internet or to the network?

  6. are you using any third-party wireless / network in the System Manager software?

  Method 1:
  

  Step 1: Boot your system in 'Safe Mode with networking' and check if you get the same error message. Then review the article mentioned below to do so:
  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Please see Using D-Link, if you use D link router.
  http://www.Dlink.com/support/default.aspx

• procedure entry point SetD | DirectoryW is not found in the KERNEL32.dll dynamic link library

  original title: procedure entry point SetD | DirectoryW

  is not found in the KERNEL32.dll dynamic link library

  Hello mxlpick,

  When you receive this error message?  How long have you encountered this message?  Here is a link that I hope will help solve this problem.  Please let us know status.

  Microsoft KB:

  http://support.Microsoft.com/kb/142606

  Thank you

• Receive the error message "query Kort is not found in the winitnet.dll.

  How can I get rid of query Kort is not found in the winitnet.dll

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3. when exactly you get this error message?

  Please answer these questions and tell us more about the issue. This could help us help you better. However, try to perform the SFC (System File Checker) scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• "... SHRegGetValueW not found in the library of dynamic links SHLWAPI.dll. »

  Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

  Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

  It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

  Positive thinking... T to all for your help and your review!

  909090... J

  Message error "the procedure entry point SHRegGetValueW be found in the library of dynamic links SHLWAPI.dll". I get this error message after downloading it and pre-installation of IE 8.  Compared SHLWAPI found on HD with SHLWAPI on OS installation disc after doing a SFC/scannow and found them manually in the difference.  Copied the body of SHLWAPI on disk and subed in the file on hard disk.

  Using IE 6 I am unable to update to SP3 after finally succeed to install SP1a by using Micro... Update.  The analysis concludes several minor updates and it fails to install those... repeatedly!  This is done after / because of a clean installation where Win2000Pro was the previous operating system.

  It is said "the mind goes first" and this is perhaps what is wrong, because I installed clean OS on dozens of comps with no problem al all.  H E LLLL PPP!   All thoughts will be performed and considered a fix... until it doesn't

  Positive thinking... T to all for your help and your review!

  909090... J

  First of all, you can not install SP3, except if you have SP2 installed successfully. Since you have SP1a, you need install SP2, then try to install the SP3 and IE8.

  In addition, this can happen if your SP service pack is damaged/corrupted.

  You receive an "Explorer.EXE - Entry Point not found - the procedure entry point SHCreateThreadRef is not found in the library of dynamic links Shlwapi.dll" error message after you install the MS04-038 security update
  http://support.Microsoft.com/kb/888162

  Installation of Windows Internet Explorer 8 on a Windows XP-based or a Windows Server 2003 computer returns error: "SHRegGetValueW procedure entry point is not found in the library DLL SHLWAPI.dll."
  http://support.Microsoft.com/kb/972264

  NASS - http://www.nasstec.co.uk

• 325 ordinal is not found in the AHDOCVW.dll dynamic link library

  I have a school program that doesn't work with IE8. He suggested in school support uninstall IE8, I did. Now, I get an error 'The Ordinal 325' not found in SHDOCVW.dll dynamic link library message every time I try to do anything. Boy did I mess up. Is it possible to reinstall IE8 or does anyone have any other suggestions as to what I should try?

  Hello.
  This discussion suggests running regsvr32 /i shdocvw.dll
  http://social.answers.Microsoft.com/forums/fi-fi/InternetExplorer/thread/1a43d725-AD6C-4713-a723-daddb11189bf
  Here is another discussion on this issue: http://www.annoyances.org/exec/forum/winxp/t1101578221

  To be honest though, you might want to try to re - install IE8 first. It back to the last known good state.

• the procedure entry point is not found in the library of dynamic links SHLWAPI.dll / unregistered class?

   I found a question similar to this but need more specific assistance. As I turned on my computer, a window pops up saying "the entry point of procedure not found in the library of dynamic links SHLWAPI.dll." This message has not left since and my computer let me just open google chrome. I have not tried to install anything lately. I tried what was suggested on a similar response - the sfc / scannow command-, but when I tried, it said I had to be an administrator. This confuses me because there is only a single user account on this computer so I assumed it was the administrator. When I tried to open the control panel to check, my computer would not leave a message with a lot of random numbers and letters and 'class not registered' jumped upward and me. I'm really confused and need help!

  Hello Elle1234,

  Looks like DLL file or the missing link between the Dynamic link Library & the missing registry entry. To replace the Dll files missing please go ahead and run the scan by following the simple steps below using the System File Checker tool and check if it does the trick.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator.  If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this review helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)