AutoFill is turned OFF, but still works as if it were 'ON '.

Similar Questions

• LaserJet Pro M251nw color 200: Wifi turned off but still broadcasting

  Hello

  First, forgive my English.

  I have a HP LaserJet Pro 200 M251nw color, it has a capacity of wifi. Because the printer is connected with a cable ethernet to my router, I don't think that he had to use the wifi built into the printer.

  Thing is, when if I disable the wifi of the printer, and even if I disable "wifi direct to print", I can still see the SSID of the printer on my devices House (200 HP-Print-a6-LaserJet color).

  I looked on the forum and I tried the 'factory reset' turn, unplug the printer and taken, wait 15 seconds... etc. It did not work. I also installed the latest firmware.

  Any help would be greatly appreciated! :-)

  Hello revlib,

  Welcome to the Forums of HP Support!

  Turn off the wireless directly on Color LaserJet Pro 200 M251nw should have disabled the SSID broadcast. Since the display before disabling has not resolved, try the built-in webserver (EWS).

  To access the built-in Web server, you will need to enter the IP address for the M251nw in the address bar of your web browser. The IP address may be collected by touching the Setup program () > reports > Network Summary.

  Once in the SAP, click on network > wireless direct configuration > select and apply.

  

  Let me know if this has help

• iOS 9.3.1 phone turns off, but still has charge

  Snice updated to iOS 9.3.1 yesterday my phone shuts off when it should be about 30% charge left. It's as if the battery is dead and it won't turn back on to save if connected to the charger. Once plugged into the charger it lights up and shows charge 30% more, but it does the same thing again until it is fully charged.

  Force the reboot of the device:

  Force the restart (does not affect the settings/data/music/apps/etc)

  1. press and hold the sleep/wake button

  2. press and hold the Home button

  3. hold both buttons until the screen turns off, then back on with the Apple logo.

• NFC is turned off, BUT still using battery

  Hello. I bought my Xperia double Z3 this new year. The battery performance was remarkable in the departure. He gave me at least 2.5 to 3 days on this time initial additional use when there is excitement on a new phone. Release minimal during the day before. And I've always used the pacifier.

  

  Now, I noticed a regular drain on my battery. Sometimes it stays on a certain level for a long time like 1-2 hours, but sometimes 2-3% of fall right before my eyes. After awakening in the Moringa, it fell 5 to 10 percent. When the screen is off, I noticed 2-3% usage. It is now giving me within 2 days and I don't think I use too much of the screen as I did before.

  I use constant services Wi - Fi and GSM (2G probably) in the mobile network settings. Mobile data connection, bluetooth, NFC etc. The main applications only installed Whatsapp, Skype, Viber, alarm Mimicker. I tried the endurance mode as well as with those applications in active standby mode, but rest of NFC.

  

  When I check in battery usage statistics, NFC service is over the top, even though I never use NFC and it still isn't.

  How can I get rid of this NFC? I don't think I'll ever use it. 3 or more days battery is much more preferable.

  

  Thank you.

  P.S I suspect that service NFC arrived here after that I tried 'Smart Backlight Control' in the display settings. It was very convenient, but I immediately turned it off because I noticed that NFC has been enabled by its own. (I disabled NFC too).

  There are a few gaps in your battery use chart. Those that are intended (ie you rebooted the phone manually) or not? If they are not your phone randomly restarts on its own.

  Regarding your problem with nfc, I would try to launch the phone in SafeMode for awhile and see if it happens. If this does not happen them it is an application that you have installed acting upward. If this happens, then you should try to repair the firmware using CDP, and if he continues to be, then you may have a hardware problem. Also test if nfc actually works in the diagnostic menu.

• Hibernation problems - my computer turns off but it restarts immediately.

  I am running Windows Vista Home basic with Service Pack 2.

  Recently, I used a disc clean up program which seems to affect hibernation. My computer turns off but it restarts immediately. I went to the command prompt as administrator and checked what is available - S3 - and that you typed in "powercfg / hibernate on ' but it will not always 'down'." I cut and restarted, but still no improvement. Has anyone else had a similar problem? If so, how to solve it?

  I am running Windows Vista Home basic with Service Pack 2.

  Recently, I used a disc clean up program which seems to affect hibernation. My computer turns off but it restarts immediately. I went to the command prompt as administrator and checked what is available - S3 - and that you typed in "powercfg / hibernate on ' but it will not always 'down'." I cut and restarted, but still no improvement. Has anyone else had a similar problem? If so, how to solve it?

  Microsoft recommended a different command:

  http://support.Microsoft.com/kb/928897

  I used the disk cleanup tool in Windows Vista, and now the hybrid sleep feature and the hibernation feature are unavailable

  Click Start > programs > Accessories > right click on command prompt > run as Admin >powercfg-h on

  Alternatively, try the Fix - It.

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop screen turns off but the system never sleeps when closed.

  Hello!

  I have a laptop Alienware M14x and quite frequently when I close my laptop, the screen turns off but the system will not. When I reopen it, the screen stays off and the system seems still to go but no matter what I press on, the screen does not turn. To fix it, I just turn it off power then back on the power button. I know that my laptop is still running because the fans are still running and the lights on the front and on the keyboard are lit. I don't know if this is a problem common or not, but it's really annoying.

  Any help would be greatly appreciated! If there are other details that might help, do not hesitate to ask!

  Thank you!

  -S.

  Firstly I find a windows command can tell you if you have something that prevents the mode 'sleep'. Run as administrator command window and use the command: powercfg-query.

  If you have my problem and SRVNET is active, you will see this:

  SYSTEM:
  [DRIVER] \FileSystem\srvnet
  An active remote client recently sent requests for this machine.

  2. to add SRVNET to the exempt list, do the following at the command prompt (EXACTLY as shown below.)  DRIVER MUST be written in capital letters):

  powercfg - requestsoverride DRIVER '\FileSystem\srvnet' system Awaymode

  and for good measure (not sure if necessary but I did anyway)...
  
  powercfg - requestsoverride DRIVER "srvnet' system Awaymode

  3. once all is said and done, it should look like this after you run:

  powercfg - requestsoverride

  [DRIVER]
  \FileSystem\srvnet SYSTEM AWAYMODE
  srvnet SYSTEM AWAYMODE

  4 enjoy again the "sleep mode".

  Credit is to JohnnyN to http://yabb.jriver.com/interact/index.php?topic=79201.0

   

• computer won't goto sleep IE screen turns off but the hard drives will not be

  No matter what I put in power options, the computer won't go to sleep.

  The monitor turns off but the hard drives, fan to continue working.

  I can't force the drives to put beyond the control of the characteristics to uncheck in the power options.

  The computer turns off when the power off but sleep option does not work.

  Thanks for any help.

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may be due to the following reasons:

  -The drivers are not updated.
  -Power option settings are incorrect.
  -The devices connected to the computer are preventing it from going into standby mode.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Windows 7 is not going to sleep
  https://Support2.Microsoft.com/kb/976877

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• The hit counter on my site no longer works on Firefox, but still works in me. How should I do?

  I have a free (by easycounter.com) visitor on my site meter. It worked fine in Firefox (3.6.16) and MS Internet Explorer.
  Yesterday, I noticed that he is no longer with Firefox but still works fine with MS IE.
  Earlier in the week, I have download some add-ons recommended by Firefox.
  Can someone tell what could be the problem and how to fix it? The code for the counter is still intact on my page at www.qsl.net/ve3bdb.
  Thanks in advance.
  Furthermore, the page now takes forever to load when you use MS IE, but I don't know if that is related.

  You are welcome

• Aspire power E1 light - 572P stays on when I stopped. Screen turns off, but the router is plugged

  When I quit my Aspire E1 - 572P the screen turns off but the blue light and the router remains connected.  Ethernet services and internet used to go off. Any suggestions please.

  Go to power options. On the left side, click on choose what the power button. Scroll down and uncheck quick start. Save changes and close.

• Defender is turned off, but does not give me access to it 2 turn on power

  original title: windows Defender

  These days have a lot of problems with my laptop.  Problems with starting.  I need to access windows defender to modify startup programs.  It is said that Defender is turned off, but does not give me access to it 2 turn it on.  In addition, different problems with different users and accounts by the office put in place, it looks like all my users are running different versions of windows, so I don't know where to start with all the problems.  Security sounded like a good place 2 start, so I guess I'll start by Defender problems.  (I have recently downloaded the free security essentials, safety signs so all green lights).

  Hello

  You might have developed some questions so I would make these your
  Admin account. These are in addition to checking your startup
  programs.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• My voiceover turned 'Off' but its still! Help!

  I buy cars the last night of the AppleTV and it's the only film that has the voiceover on. I went into settings and made sure it was turned off, turned on and walk back. I disabled the AppleTV more than once and its still. I have the 4th generation. I also went on our computer to play and voiceover is 'off', but on the computer as well.

  If it does the same thing on the computer, then there is a problem with this film, contact iTunes

• E7440 latitude: Wake-on-Lan works when the laptop is turned off, but not when it's put into hibernation

  I have a Latitude E7440 running a clean install of Windows 10. If the computer has been stopped, I can use a Wake - On - Lan Magic Packet to the MAC address of the Ethernet port (as described here) to turn the computer back on. But if the computer is in hibernation, it does not work.

  Probably, it is that when the computer is in hibernation the link on my switch light is off, but when it is stopped, the link light is on.

  So my question is: How can I get this phone to maintain the LAN port when hibernation, in the same way on shutdown? Thanks in advance.

  smammy,

  Click on the link below for a possible resolution following on problem of your computer network settings.

  How do I enable Wake on Lan on Windows 10

• I have a box to update the browser Coupons that appears every time I go to any Web site. I have to close it to make it go away. I have it turned off, but it does not work. How can I get rid of him

  The box says: we have strengthened our add-on of Coupons that will improve your browsing experience by posting coupons that you shop and browse your favorite sites on the web. See our privacy policy and Conditions.

  Disable these improvements NEAR

  Turn off does nothing, but CLOSE it closes

  Hi vbaio.

  Looks like the voucher program may be malicious. Here is a Support article on how to identify and treat by malware:

  Fix Firefox problems caused by malicious software

  I hope that helps!

• Checker says IMEI phone is blocked, but still works fine.

  Hi guys,.

  I recently bought an iPhone 6s over 64 GB on craigslist and unfortunately, I didn't check the imei carefully before buy you. So about 3 days ago I check with Tmobile imei check and it said that the phone has a balance and could not be used on tmobile if the invoice is not paid. I know I got fked trying to contact the seller, but I don't have much hope that it will never. Today I check once again, and he says that the phone is locked. However, it still works fine. I tried to run the speedtest and compare it with 6 sec of my friend also from tmobile. It turns out that my phone is actually faster than my friend.

  And by the way, looks like the seller already had it unlocked via an online service. I tested it with an old at & t sim card and it read the SIM very well.

  So, guys, any idea?

  Any ideas on what? Unless the account holder solves the pending bill, it is possible that the phone could, at any time, stop working on TMoible. However, this will not affect his ability to work on AT & T or Verizon.

• HP Pavillion G6: hp will continually turn off but cpu 48 - 49 c temp

  Help, please! I love and need my laptop! I have a Pavillion G6-2200.  In December I started having overheating problems. I was able to clean a very dirty fan and for the last three months, that it worked perfectly, well except that I couldn't use my wireless. Then on Friday he just stopped. I could not turn it back on for several hours and then it turns off again. I cleaned and replaced the thermal paste on the heat sync. I cleaned the fan and low load cpuid. Now I can turn it on and it will work for about 10 minutes before his arrest. It turns but obly after I remove and replace the battery.  Here is a screenshot of the newspaper of cpuid. Any help would be greatly appreciated.  Thanks in advance.

  

  Hi @Calipurp,
  
  Welcome to the Forums of HP Support!  I understand that you have a problem with the computer overheating before turning off. I'll be happy to help you.

  Please follow all the steps of reduce the heat inside the PC to prevent overheating and laptops HP-HP CoolSense technology.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.