Automatic backup using EEM

Similar Questions

• SPFile automatic backup restoration

  Hello

  I tried to restore a spfile from automatic backup - using the rman catalog.

  The database is down, I restarted forcefully startup nomount and set the database id.
  Autobackup controlfile and spfile are defined, too.

  When I published "spfile automatic backup restoration" the restored failed, because no valid backup piece has been found.

  The command restore spfile to autobackup db_recovery_file_dest = db_name "/ u03/data/DB01/flash" = "DB01"; did the trick.

  In my mind it's a bit strange. Yes, this is not the default value for flashback_area.  But I expect that the opportunity db_recovery_file_dest (under backuppath) are stored in the recovery catalog.

  This behavior is normal? or "user of a stupid mistake?

  Concerning

  Christian

  If you use the command in RMAN catalog below should work.

  RMAN target / catalog user/pass@rcvcat

  RMAN >

  Set the DBID =;

  startup nomount force;

  restoring automatic backup SPFile;

  stop immediately;

  Run {}

  until time to_date (timestamp,)

  startup nomount

  Restore controlfile;

  bootable media;

  restore the database;

  recover the database;

  }

• My Clickfree automatic backup drive has stopped working, with my iMac, what is the best replacement to use with Time machine

  My Clickfree automatic backup drive I had for many years stopped working with my iMac, what is the best replacement to use with Time Machine.

  I can't even reformat the drive to try to start over, then think its time I invested in a high today but don't know where start looking so any advise would be a great help.

  Thank you guys

  A lot of users on these forums recommend OWC (www.macsales.com) Mercury Elite Pro series JEP due to their durability, affordability and quality of construction. I have about 6 of them connected to my iMac and have never had a speaker to fail. When a hard drive fails, substitute is a 5-minute process to re - use the box. To help you get started, you can find the line to: https://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB

  You can find them in various ways and with a variety of configurations of connection so you can find the one that best fits your needs.

  Good luck!

• Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Recovery of the system using Backup automatic backup of XP program wants a disk is there a way to let him use a CD instead?

  Name of the operating system Microsoft Windows XP Professional
  Version 5.1.2600 Service Pack 3 Build 2600
  Manufacturer of operating system Microsoft Corporation
  250GB_DRIVE system name
  System manufacturer HP Pavilion 061
  EG705AA-ABA M7265C system model
  System Type X 86-based PC
  Processor x 86 Family 15 Model 4 Stepping 4 GenuineIntel ~ 2800 Mhz
  Version/Date BIOS Phoenix Technologies, LTD 3.17, 20/04/2006
  SMBIOS Version 2.4
  Windows C:\WINDOWS directory
  System directory C:\WINDOWS\system32
  Boot Device \Device\HarddiskVolume2
  The local United States
  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
  250GB_DRIVE\HP_Administrator user name
  Time zone Pacific Daylight Time
  Total physical memory 072,00 MB 3
  1.55 GB available physical memory
  Total virtual memory 2.00 GB
  Available virtual memory 1.96 GB
  Page file space 4.83 GB
  Paging file C:\pagefile.sys

  Hello

  The ASR (automated system recovery) tool must have a disk for restoration purposes. The best option, if you really want to use ASR, is a floppy of USB external as suggested by chrisamiller.

  You can also follow this procedure to create the ASR files without the floppy drive and then copy them to another location to create a floppy disk or, if you're lucky, your PC can boot from a USB key (I never tried to start ASR on a key, do not know if it will work or not, but it might be worth it) :

  "You can"trick"the ASR in the race without a floppy drive." When it gets to the point where he writes on the diskette to cancel it. He writes two files, which are used for recovery, in the Windows\Repair directory. After completing your ASR copy these two files (files asr.sif and asrpnp.sif) to a network location and then make the diskette also. Make sure you update your disk whenever you make a new ASR or your backup will be watered.

  Or, you can use a USB floppy drive. It is sometimes the only option, especially if you need to install SCSI or SATA drivers during the recovery. »

  a: when you start the backup, it may be in Wizard mode. Follow the link to the Advanced Mode.
  b. Backup tab.
  c. click on the box next to the drive you want to back up so that it has a blue box.
  d. backup media or file name: Browse.
  e. Select a new file name on your CD.
  f. start the backup.

• Use the automatic backup? If so, what are the settings?

  Bob ten recommended to disable the automatic backup in PP CS4 about a year on Creative Cow. Questions had been report there, he said.

  What should I do? I have lost assets somehow for the first half of a 30-minute project, went into the automatic backup file only to find out that the default of the PP is only 5 automatic saves every 20 minutes. Fortunately, I was able to get the first half of the return project by importing a backup that I did yesterday, and the important in the affected project and copying assets (I was wondering if it is wise to put everything in a new project where the project file is corrupted).

  Automatic backup sounds like a good idea. If you agree, what the parameters for what would you recommend? I "Ctrl-S" after almost all the changes I make in the timeline. but I never know what might happen at the beginning of the timeline, if I work at the end - accidents as a mouse hangs up while I'm trying do drag an asset on the timeline and unintentionally damage assets at the beginning of the timeline (why mouse hang up, anyway? Is - this sweating on hand? Stressed memory? Having bridge, AE and PP open at the same time? I've got 12 GB, but it's so boring.).

  Your expertise is greatly appreciated.

  Paul

  Paul,

  I wonder what prompted Bob seem not to use AutoSave. I didn't get a lot of negative, when it is properly configured and then used reports correctly. I leave the default setting of backup 5 automatically @ 5 min. intervals. However, I also use Save, Save_As and Save_As_a_Copy on many projects. They are all similar, but there are differences. This ARTICLE will give you general information. When you know how everyone is different, you can then determine a workflow, what suits you and your needs.

  If I do a particularly difficult project, I could also 'archive' some recording automatic folders and files with a copy, just for guard duty. However, with the right combo from the different options of backup, it also will be those who backup automatically extra too.

  Now, it seems that Adobe changed the functions of automatic backup, but I was not able to confirm this. At the same time, AutoSave was smart enough. If we did not no Assembly, AutoSave would not be invoked at the interval, only with editing and changes. Somewhere along the way, it seems that AutoSave now ONLY works with the interval, so that if we let the machine for an hour, they find themselves with 5 automatic registration in duplicate in the folder. Personally, I liked the "old way" much, much better. Who needs 5 (or anything that is chosen) duplicate PRPROJ files? Maybe something in the code forced Adobe to 'dumb down' AutoSave?

  As a side note, you lose certain assets. I have a policy - never use goods initially in my projects - only Copies, the originals on my NAS. Capture to miniDV Tape files is an exception, I do not reuse the tapes and could always re - enter, if necessary. Also, don't forget that the PRPROJ file does not contain any media (titles are a limited exception) and ONLY links to this media.

  Good luck

  Hunt

• after update, the Favorites have disappeared. There is no automatic backup in the last 2 months. under the restoration, it gives me the possibility to restore until today.

  all of a sudden I have no Favorites.

  I read to all bookmarks, clikc backup and restore, restore and it will list the last 10 backups. the only listed backup is starting today, and no bookmarks are added when I restore

  I also saw to look on the desk in the old firefox files... most recent automatic backup was 2 months ago... it's too old

  I can't find the latest bookmarks files

  If you haven't tried stopping and restarting Windows because this problem occurred, I would suggest trying it. Some users have reported a problem after the updates of Windows where they see only partial information in Firefox, perhaps because of a problem of privileges.

  After that, if the problem persists, I'll ask you to verify a parallel settings folder. You can open the settings file (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Make a note of the name of the current folder in the Windows Explorer address bar, and then click the 'profiles' word that appears before him to navigate a level and see if you find other profile folders here. If you check the inside, a folder bookmarkbackups in other profiles appear to be current?

  IMPORTANT: Do not use Windows System Restore feature — which can cause loss permanent data.

• Big Bill - is automatic backup of iCloud the cause?

  Bill last month was $600 US for iPhone 6 s daughter. Use FaceTime on average once or twice a day. She uses uTube several times (short) a day for his 16 month boy manageable when changing layers or him in the car seat or to occupy his attention when she has to do something that requires his full attention momentary. She takes several photos and short videos, two or three times a day. It has 64 GB of storage and storage in iCloud. The phone company blames iCloud through its automatic backup function. Each additional GB of data that it uses on its allocation of 8 GB about is charged at $7.50 American. Last month, she used more than 70 additional GB. I want to reduce this cost. The answer phone company is that they cannot do anything, it's the Apple phone that's to blame. Is it true?. One of the problems is that we have is that she doesn't have a computer apple, just an iPad. She can not save on my computer so if I bought a computer would be backup on which eliminates the automatic obligation of the automatic backup of the installation iCloud?. Sorry for this question long but I'm desperate to reduce the monthly cost on his phone. The other two iPhones that we must work normally, but then none of us have 18 months to deal with.

  iCloud backup will only take place on the wifi is not back ups that are running with the cellular provider bills. Besides that, generally, they will be much smaller that any movie she is watching tube you.

  One way to reduce the cost would be to stop doing the things she does until she can do so via wifi.

  I must say tho 70 GB is a lot for a phone.

• Automatic backups made in libraries that are not yet open?

  I'm familiar enough with FCPro X (using the latest version 10.2.3) but I saw something for this, I don't really want.

  I hope I'm wrong!  That's why I write here

  When we are editing in a library, FCPro is automatic backup library every 10 or 15 minutes or more. (Don't know how many times, but not important here.)

  It's a good idea that Apple did this.  Always nice to have automatically saved versions.

  But what I found, is if we said, 10 different projects, we are working on--which means 10 different libraries on our hard drive FCPro creates these libraries for backup automatically on all 10 libraries!  Even if we have not opened a library for 6 months, it still gets automatic backups!

  Sometimes the backup of the library can be 30meg, or so, if we are changing for 3 hours - find us in each of the 10 libraries there are several automatic backups created - even you of course, nothing has changed in the library!  Maybe 8 of the 10 have not yet opened and yet in the "Final Cut Backups" folder, there will be a few hundred meg of backups automatically: of course it must, because backups are in libraries, we haven't yet opened!

  I know not how to disable this feature - so FCPro stops auto - and we can do separately in each library - but that's a lot of extra work, remembering that libraries are "automatically backup" and which are not.

  I guess I want to come is that we would like FCPro continue to automatically back up the libraries that we change in French - but I'm correct that it also backs up the libraries that we don't even open using hundreds of megs of useless data.

  All I want is the feature of works as is, but only when opening a library - NOT in others who have not been affected.

  I am writing to be sure I understand it.  This doesn't seem to be the case?  Is there a way to tell FCPro (not for each library separately) only to make automatic backups in I work in libraries?

  Thank you for reading this... what I hope I am WRONG!  And there is a workaround or something?  It's just a nuisance to have to remember to turn on all the automatic backups on 'OFF' of each library - but then activate it when you work on 1 or 2 - and then turn them off again.

  Any thoughts?

  Thank you

  Larry

  Larry Cohen wrote:

  If we say, 10 different projects, we are working on--which means 10 different libraries on our hard drive FCPro creates these libraries for backup automatically on all 10 libraries!  Even if we have not opened a library for 6 months, it still gets automatic backups!

  Sometimes the backup of the library can be 30meg, or so, if we are changing for 3 hours - find us in each of the 10 libraries there are several automatic backups created - even you of course, nothing has changed in the library!

  All 10 libraries appear in the library list? If they are, why not close those that you don't need for this session?

  That said, I never had what you describe. Where these libraries are stored? Is the drive (or drives) in the OS X Extended (journaled) format?

  Russ

• Can I import my Firefox bookmarks from an automatic backup to a new MacBook Pro computer?

  I backed up my MacBook Pro 11 OS X Lion with Time Machine system and then got a new MacBook Pro 13 OS X Mountain Lion system. I can't use Time Machine to restore my system. I was able to drag and drop my files, but I forgot to backup my Firefox bookmarks HTML. Are automatic backups .json accessible Firefox for me on my external drive for Time Machine? Can I find one of these backups and restore it on my new laptop? I did not all new bookmarks, crushing would not be a problem.

  Have you already found the Firefox profile folder in this Time Machine backup?

  • < User > /users//Library/Application Support / Firefox/Profiles/< profile >.

  In Mac OS X v10.7 and later versions, the file $HOME/Library is a hidden folder.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

• Implement TC as just an automatic backup

  I used TC as a router and back until I changed my ISP and they provided their own router.  Now just have to use the TC as an automatic backup, I'm having problem setting up.  Can I connect the TC by wireless to my new network of woman?  The TC or the laptop means network initial when the TC was also the router then how can I wipe the TC (data are old) and start from scratch and how can I do this?

  Can I connect the TC by wireless to my new network of woman?

  Sorry, but no. The TC must connect to the ISP router with wired Ethernet wired, permanent. Connection of one of the ports on the router ISP LAN <>- to the "O" on the TC WAN port.

  If you want your backups to be officially supported by Apple, you have to back up by using the wireless TC, or by connecting your Mac directly to CT using a wired Ethernet connection.

  Know that it is possible that you pourriez be able to save on time using the ISP wireless Capsule... but the downside of this is that it will no help from Apple's Support if you use this method for backups.  So your call on that.

  
  

  How can I clear the own TC (old data) and start from scratch and how can I do this?

  The method for doing this varies depending on the operating system you have installed on your Mac.

  Do you know what operating system you currently have installed on your Mac?  Otherwise, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and poster on the Version of OS X number that you see there.

• Automatic backups

  Hello

  Aparently my computer makes automatic backups of everything I put on my hard drive. He uses a lot of space, and I don't know how to change it.

  Hello

  If I understand you right you are talking about system restore. In system properties, System Restore option there. There is possibility to disable the system restore option. Under settings, it is possible to decrease the disk space.

  Check all these parameters.

  Good bye

• How can I set up automatic backup on iPhone 6s

  I bought a new iPhone 6s more yesterday. I had been to support my old iPhone 5 up to my computer. I thought that the new phone was set to automatic backups for iCloud, but I just got a notification indicating that the phone had not been saved for many months.

  How we configure it back to iCloud automatically at a certain time of day?

  You cannot set it for a certain time of the day. Once your backup is activated on the phone, backup it once daily when the unit is connected to power, a Wi - Fi connection and the screen is locked. Go to settings > iCloud and make sure active backup, and you can try a manual backup. You can use this document to support to solve the problems of the iCloud backups.  Get help from backup of your device in iCloud - Apple Support

• My iPad is no longer the automatic backups in icloud. When I try to do it manually it gives me an error message

  Automatic backup on icloud no longer works. When I try to run it manually it gives me an error message

  Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

  You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > managing storage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

  Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

  Then, try to connect the device to a new location (different WiFi network)

  If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > BackUp), reboot the device and then turn on BackUp on new.

  If it does not help disable backup again, remove your existing back to the top of the settings > iCloud > storage > managing storage > backup > appliance (scroll down) > delete backup, restart the device and then turn on BackUp.

  If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

  The next thing to try would be to restore your network settings. (Settings > General > reset > reset network settings)

  Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

  If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do it with settings > iCloud > storage > managing storage > backup > this device > Back Up Options.

  If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

  Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

  More on v iCloud iTunes backup

• Beginner question the easiest way to create automatic backups for readynas from windows PC

  I just installed a readynas duo v1 to my router and wants to set up an automatic backup (uncompressed file copy) of my windows pc, and I am new to the use of the nas and raid.

  Can I map nas as a disk on my pc and then I don't know how to proceed.

  Any help would be appreciated.

  I was not able to reset password admin I need help there too.

  Thank you

  Thanks to those who tried to help me.

  I decided to buy acronis and use it to back up data on the readynas.

• Disable the automatic backup in Apple applications

  How can I disable the automatic backup in the Script Editor and other Apple applications?

  I love how the captain tells us what is good for us and allows us no easy way to change things.

  AutoSave/Versions has been part of Mac OS X Lion. See these instructions. Save As will be in its normal position in all applications, and when you close the documents, you will be asked if you want to return (same result as the old do not save).

  Versions and AutoSave will always run in background for the applications that use it. You can't really turn off without disrupting some application menus, but it's been at least OS X behave more like Snow Leopard or earlier version.