Automatic call disconnect on C40

Hello, I would like to know if anyone knows if there is a way to have a C40 disconnect a call on its own after a period of time. We had this option on former TANDBERG systems, but I can't seem to find a setting for the web interface of C40. Maybe this can be done using API commands? Thank you

Older TANDBERG MXP endpoints had this possibility, but it is not a feature on any endpoint of Cisco, the only option is to someone to finish the call themselves.

You should contact your account manager and request a feature if it's something you want to add.  It will not be added to CA based endpoints, that is to say: the C series for example, because TC software is in maintenance mode and only bug fixes are performed with no new features added.  However, it might be possible to add to the CE software for the current endpoints of line if there is enough interest.

Tags: Cisco Support

Similar Questions

  • phone calls disconnected with black screen cannot close

    my iphone screen 6 turns black while talking and calls disconnected - cannot disconnect caller or turn off the phone

    I cleaned the (sensor area) and removed the protective shield - I also 'reset statistics' under cell which worked for a few days but now turns black screen while calls speaking, be disconnected or conversations break up - can not turn off the caller's phone - I have the latest update 9.3.5

    georgefromma wrote:

    I removed the protective shield...

    "Protective shield"?

    Its existence on your iPhone is maybe a problem.  You can try to use the iPhone without this "shield" because it can hinder the iPhone proximity sensors.

  • Skype Audio / video call disconnect after 14 seconds in mac

    Skype Audio / video call disconnect after 14 seconds in mac

    1. call interrupted after 13-14 seconds

    2. cannot hear the caller's voice but may receive on my side

    3. I have reinstall the Skype delete old does not work

    4. even I have remove the whole mac and reinstall is the same question

    5 normal voices of Skype can hear I can do auduio / video on the face time

    so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

    Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

  • Why my internet accounts automatically get disconnected after that my computer turns off by itself?

    I have a Compaq PC with processor Dual-Core AMD Athlon X 2 5000, and it runs Windows Vista Edition Home Premium... In my view, that is running Service Pack 2. I use the computer to check my e-mail, my YouTube and Facebook accounts (and possibly other accounts spread I connect to).

    I usually use Internet Explore to browse the web. Sometimes my computer turns off by itself due to overheating. But whenever when this happens, when I turn my computer back on and return to the use of the Internet, I've totally frustrated to find that all my accounts were automatically disconnected!

    Even when I check these boxes to keep me connected to these accounts when I turn on the computer again after a successful stop, my accounts still get disconnected!

    It only seems to happen when my computer turns off by itself without stopping... mainly due to overheating. When I turn on the computer again after a successful regular stop, my accounts are automatically saved on once again, due to activate me "Keep me connected" by checking these little boxes. But after a situation when the computer is off all the time (either by himself for a reason, either by me with strength to turn it off when my computer crashes), my accounts do not remain.

    How can I prevent my accounts automatically be disconnected so that whenever I start the computer, after it turns off by itself, my internet accounts turned on? There must be a patch for this embarrassing situation here on the internet.

    Perhaps because an improper shutdown / forced can inpact on different parameters.

    Your must not PC in all cases be having heat problems, you need to fix this (heat) before it turns into something terminal

  • Screen pushing problem in the incoming call disconnected event

    When a phone call disconnects I would push a screen containing some information about the appellant

    In the call disconnected event I'm doing this:

    UiApplication.getUiApplication () .requestForeground ();

    UiApplication.getUiApplication () .pushScreen (new CustomScreen());

    It works most of the time.

    But when I close this screen the phone keypad.

    And sometimes my screen does not get pushed and the keypad appears.

    I could be wrong, but I guess that my screen is pushed in the wrong context?

    Can someone point me in the right direction?

    See you soon

    I have a slightly different take on this problem.

    I think that you run this code:

    UiApplication.getUiApplication () .requestForeground ();

    UiApplication.getUiApplication () .pushScreen (new CustomScreen());

    at your disposal, and if you run in the context of phone, not your application.

    The treatment of changes to it it context moves to your application - the best way to proceed is to use a Global event.  Search for informaiton on world events so this is new to you.

  • Calls disconnect unexpectedly after a fixed period of CODIAN and VCS

    I have the following problem:

    Media codian blade use the VCS control as a goalkeeper.

    One day, when do the new conference of the codian (or MSD)... AFTER 2 hours and 15 seconds, the present end point at the Conference to close the connection. In the paper, I see messase 'normal clear call '.

    In the debugging of vcs log, I see in the same second:

    in the log, I see the call disconnected... message endpoint leave the Conference with number 3315 (is the virtual room)

    the first request was born form point endpoint or the codian? the programmer, there are the same time.

    I don't know what can do to see if it is present a timer in the VCS control configuration.

    Until there are, the problem was not present. I don't know what is coming.

    Is possible that endpoint to signal to close the Conference?

    Thanks for your help

    FCostalunga

    ECO

    Unfortunately, these screenshots and the event of VCS log extract provide really enough information to explain why the call drops, and I therefore recommend that you open a case with TAC so that appropriate newspapers can be collected to solve the problem more far.

    Best regards

    Andreas

  • TC6 Firmware - call disconnects after 2 hours

    Hi all

    Our client complains that after the firmware update on the endpoints of telepresence (C40, C60, EX90) to TC6.x, there are two questions:

    1 end with TC6.x points will disconnect after 120 minutes to be connected to any appeal initiated by the remote end.  They will not cut the minute 120 if the TC6.x Unit has initialized the call.

    2 end points with TC6.x cannot connect to units MXP running F6 or earlier.  Since we MXP Codec Software F6 and F5 this is causing problems with the calls point to point.

    They have units with the TC5.1.6 software which have no problem at all. The only thing among others as the routers and switches is a VCS controller.

    Anyone has any ideas on what is the cause?

    Thank you

    John

    In TC6, we turned silently on TCP KeepAlive for the session h225 running with the default time of linux tcp_keepalive_time of 7200 seconds.  That would probably explain the disconnection to 120 minutes which sees the John after moving from TC5.1.6.

    I would also say that if this is the case, there is something which is tcp to the current between the two devices.  The firewall is also my first thought.  Perhaps WAAS on a router?  Sometimes you can get a clue that this is occurring by comparing the tcp ack/seq/windowsize header to see if it is different between the sending to the receiving side for the same package.  Something like 'tcpdump-s0 w /tmp/h225.pcap port 1720' root must limit the collected output.

    The TC6 troubleshooting located here would be a good reference in newspapers and tcpdump to use for troubleshooting signaling related issues:

    http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC6/troubleshooting_guide/tc_troubleshooting_guide_tc60.PDF

    The example uses this doc does not filter the traffic and John you do not want to limit the output of tcpdump only for signalling interesting to avoid problems with the size of the OCAP collected file.

    We have a bug open better control KeepAlive on the session h225 (CSCub20591) but not clear if/when it will be executed and for now if there is something that is expire tcp sessions in the network, changes will be made here to avoid this problem.

    For the 2nd question, I'm not aware either a problem with older MXP but your approach Martin to try a later version of the software would also be what I would recommend.  If you need to solve problems with old software MXP TC6, the same troubleshooting guide h323 newspapers are where you want to focus on to see where in the handshake the call fails and compare this output between TC6 and TC5.1.6 as to what has changed that can have an impact on this.

  • Webex Cloud CMR SIP video calls disconnect after 20 seconds

    Hello

    I am running version 9.1 with Exressway-C CUCM / 8.6 Expressway-E.  I have no problem doing business SIP video calls.  However when I make video calls on a site of WebEx CMR, the call becomes still cut off after 20 seconds.  It is audio and video for the first 20 seconds and then disconnects the call.

    I was able to recreate this situation of 3 of my clients running CUCM version 9.

    I have 2 clients running CUCM v10.5 and the issue is not the case.  I don't know if this question is 100% related to the CUCM version, but looks like a correlation obviouse.

    I watched the SIP trace and it seems that the endpoint CUCM is end the call with normal call clearing.  I tried 8945 phones, jabber for iphones and a C40 and I get the same results.

    If anyone has any ideas I would appreciate it.

    Thank you.

    Hello

    Can you receive calls B2B? During the call set up, Webex will try to set up another session TCP inbound to your E Expressway on port 5060 and 5061, do you have this open to outside within the TCP sessions? (see page 5 of the CMR-Cloud deployment guide: http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/sol...)

    If they are open, the TCP session is configured for an incoming invitation with complete SDP of the TPS Cloud, you can check your sip max message size is located at 11000 - if you went from CUCM ~8.6 5000 was the default size and the default continues for an upgrade.  Check under system-> Service settings-> CUCM service-> show click on the button to display all options, and then check the size of incoming messages SIP advanced Max.

    -Jonathan

  • How DO I start recording in lenovo x 3 automatic calls Marshmallow vibe update

    HOW to start recording in lenovo Marshmallow vibe x 3 update, please help this because it was possible in the version of lollipop of Appeal set but now I m not able to get this parameter in marshmelow automatic update calls.

    Thank you very much for that answer pavlo I found the solution

  • automatically be disconnected?

    Whenever my computer is not used for a few minutes, it automatically disconnects me and I have to open a session back with my password how can I get rid of this problem?  Also, I don't want to use a password every time how these problems?

    Hello

    Right-click on an empty area of the desktop and select Customize, and then click on the link of the screensaver at the bottom right.  In the next window, uncheck the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the change.

    Kind regards

    DP - K

  • Calls disconnected endpoint

    I had a client ask about the following situation.

    They have disconnected a C Series codec in one of their rooms. When calls were made to the endpoint offline, rather than fault, he ended up in the MCU. I don't have the means of laboratory to try to recreate it, but can someone shed some light on why this happens?

    Thank you

    Robert

    Hi Rob - your client to make a call to the E164 Alias of the system and then it routed to the MCU?  Could be the E164 alias is close or is the service prefix MCU and sound recorded as GW at any GK your help.  Would be useful to see if there is a correlation between the two, or if your client made up [email protected] / * /, and the alias is always nearby the GW service prefix.  This can also occur as well.

    It would be able to verify?

  • Why I automatically get disconnected a few minutes after loggin?

    After registration to my creative cloud account, I am automatically disconnected. After I got out of my typekit fonts will not longer work.

    Someone knows the solution?

    Sign by sign in http://forums.adobe.com/thread/1450581?tstart=0 can help

    - and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html

    - and the "loopback" https://forums.adobe.com/thread/1504792

  • Satellite L350D - WLAN call disconnection

    Hello world!

    I have a problem with my D L350. My notebooks is connect through WiFi to internet but it keeps disconnecting every now and then for a short period of time (seconds half a minut) from the internet.

    I don't know what to do! I have not changed anything about drivers. Other computers do not have this problem via WiFi, if it's not the router.

    I hope you can help me!

    Maybe you should change the driver or let say to update.
    Try to update the WLAN driver. As a result, visit European Toshiba driver download:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    If it doesn't work try updating the BIOS. You can find it on the Toshiba site too.

    And by the way what system operating do you use?

  • Fall of Illustrator to the previous version automatically after disconnecting

    Dear Pros, HAVE

    I would like your help, please.

    I recently download new version for 2 days and it works well. After disconnection of CC because she is changed in "trial" rather that 'open' I disconnect and connect again, after that, I noticed that the new features like Start interface and new tool form had disappeared, and it was the previous CC version, I used before the newest updated version.

    How can he withdraw without asking me? Could you please say how can make like the latest version again?

    Thanks a lot for your support with kindness.

    Masako

    Masako,

    I'm afraid you will have to ask Adobe, perhaps in a cat (simply click the still need help button immediately).

    Creative cloud support (all creative cloud customer service problems, chat open from 05:00 to 19: 00 PST on business days)

    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

    or let's hope one of our friends of the staff see this soon.

  • Xbox Live call disconnection after every 10 Minutes.

    First of all, I am aware of the number of threads on this subject... but I couldn't find a solution after almost a year of searching for a solution. Then... I apologize for this o_o

    Anyway, here's how I put things up:

    Paul (provided by ISP) modem > Linksys SPA2102 (provided by ISP) > Linksys WRT120N > Xbox and computer - everything is wired.

    * As you can see, I have two routers... and I never understood why I can't get rid of one provided by my ISP. If I connect the modem Paul directly to the one I bought, the Internet works everything simply. It is therefore quite confusing when you define things upwards because I have two routers. I tried for the most part all that was mentioned (Portforwarding, DMZ, manual adjustment of the things in the Xbox... can not more just now), except the update of my routers because it does not seem to update.

    If anyone can think of something that might work, please post. If you need more information on the situation, I wouldn't mind doing some captures of screen or something.

    Hey thank you guys.

    As you have a DSL modem, you must convert the modem in Bridge mode to do your job to the X - Box.

    • Maybe you are looking for

    1 February 14:10:54 "" "" "" TVCS: event = "call disconnected" Service ="H323" Src - ip = "media_blade_ip_address" Src-port ="63029" type-aliases-Src = "H323" CBC-alias ='3300"CBC-alias-type ="E164"CBC-alias ='3315" Dst - ip = "ip_Endpoint" serial number Call = "62c91b6e-4cc5-11e1-b738-0010f320109c" Tag ='62c91c86-4cc5-11e1-9c2b-0010f320109c"Protocol ="TCP"Level ="1"elements UTCTime ='2012-02-01 13:10:54, 904"
    1 February 14:10:46 "" "" "" "TVCS: event ="Message sent"Service ="H.245"Message-type ="CloseLogicalChannelRequest"Src - ip ="IP_VCS_CONTROL"Src-port ="15741"Dst - ip ="ip_Endpoint"Dst-port ="9012"call-number ="62c91b6e-4cc5-11e1-b738-0010f320109c"Tag ='62c91c86-4cc5-11e1-9c2b-0010f320109c" detail = "LCN:62" Protocol ="TCP" Level = "3" elements UTCTime = '2012-02-01 13:10:46, 935"
    1 February 14:10:46 "" "" "" TVCS: event = "Message received" Service ="H.245" Message-type = "CloseLogicalChannelRequest" Src - ip ="media_blade_ip_address" Src-port = "63028" Dst - ip ="IP_VCS_CONTROL" Dst-port = "15577" call-number ="62c91b6e-4cc5-11e1-b738-0010f320109c" Tag = "62c91c86-4cc5-11e1-9c2b-0010f320109c" detail ="LCN:62" Protocol = "TCP" Level = "3'elements UTCTime =' 1 February 14:10:46 "" "TVCS: Event =" Message sent "Service ="H.245"Message-type ="CloseLogicalChannelRequest"Src - ip ="IP_VCS_CONTROL"Src-port ="15741"Dst - ip ="ip_Endpoint"Dst-port ="9012"call-number ="62c91b6e-4cc5-11e1-b738-0010f320109c"Tag ='62c91c86-4cc5-11e1-9c2b-0010f320109c" detail ="LCN:61" Protocol ="TCP" Level = "3" elements UTCTime ='2012-02-01 13:10:46, 925"
    1 February 14:10:46 "" "" "" TVCS: event = "Message received" Service ="H.245" Message-type = "CloseLogicalChannelRequest" Src - ip ="media_blade_ip_address" Src-port = "63028" Dst - ip ="IP_VCS_CONTROL" Dst-port = "15577" call-number ="62c91b6e-4cc5-11e1-b738-0010f320109c" Tag = "62c91c86-4cc5-11e1-9c2b-0010f320109c" detail ="LCN:61" Protocol = "TCP" Level = "3" elements UTCTime ='2012-02-01 13:10:46, 925"
    1 February 14:10:46 "" "" "" TVCS: event = "Message sent" Service ="H.245" Message-type = "CloseLogicalChannelAckResponse" Src - ip ="IP_VCS_CONTROL" Src-port = "15741" Dst - ip ="ip_Endpoint" Dst-port = "9012" call-number ="62c91b6e-4cc5-11e1-b738-0010f320109c" Tag = "62c91c86-4cc5-11e1-9c2b-0010f320109c" detail ="LCN:1" Protocol = "TCP" Level = "3'elements UTCTime =' 1 February 14:10:46 "" "" "" "TVCS: Event ="Message received"Service =" "H.245" Message-type ="CloseLogicalChannelAckResponse" Src - ip = "media_blade_ip_address" Src-port ="63028" Dst - ip = "IP_VCS_CONTROL" Dst-port ="15577" call-number = "62c91b6e-4cc5-11e1-b738-0010f320109c" Tag ='62c91c86-4cc5-11e1-9c2b-0010f320109c"detail ="LCN:1"Protocol ="TCP"Level ="3"elements UTCTime = '2012-02-01 13:10:46, 915"
    1 February 14:10:46 "" "" "" TVCS: event = "Message sent" Service ="H.245" Message-type = "CloseLogicalChannelAckResponse" Src - ip ="IP_VCS_CONTROL" Src-port = "15741" Dst - ip ="ip_Endpoint" Dst-port = "9012" call-number ="62c91b6e-4cc5-11e1-b738-0010f320109c" Tag = "62c91c86-4cc5-11e1-9c2b-0010f320109c" detail ="LCN:2" Protocol = "TCP" Level = "3" elements UTCTime ='2012-02-01 13:10:46, 905"
    1 February 14:10:46 "" "" "" TVCS: event = "Message received" Service ="H.245" Message-type = "CloseLogicalChannelAckResponse" Src - ip ="media_blade_ip_address" Src-port = "63028" Dst - ip ="IP_VCS_CONTROL" Dst-port = "15577" call-number ="62c91b6e-4cc5-11e1-b738-0010f320109c" Tag = "62c91c86-4cc5-11e1-9c2b-0010f320109c" detail ="LCN:2" Protocol = "TCP" Level =62c91c86-4cc5-11e1-9c2b-0010f320109c"Protocol ="TCP"Level ="3"elements UTCTime ='2012-02-01 13:10:46, 905"
    1 February 14:10:46 "" "" TVCS: Event = "Message received" Service ="H.245" Message-type = "EndSessionCommand" Src - ip ="ip_Endpoint" Src-port = "9012" Dst - ip ="IP_VCS_CONTROL" Dst-port = "15741" call serial number ="62c91b6e "