automatic configuration is flashing on my monitor is a computer problem

Similar Questions

• Automatic configuration of the HP w17e monitor active at random

  Currently using an hp w17e flat, wide LCD screen connected to a NVIDIA 9500 GT video card located in a computer that is running Windows Vista Edition home premium (32 bit).  Running on 1440 x 900, 60 Hz frequency suggested by the insertion of the packaging of refreshment. Also in the 32-bit color setting.

  (Other computer stats available at http://www.compusa.com/applications/searchtools/item-Details.asp?EdpNo=4419976&sku=T71-3446%20ON&srkey=3000%20H210%2057088788)

  Tuesday night (13/10/2009) let my computer playing music with the monitor off.  Morning, Weds(10/14/2009) and any platform is off.  Turn it turn it back on and seems to update windows pushed a lot of updates.  Then I noticed the problem.  Randomly, the automatic configuration of hardware on the monitor turns on.  Tried different applications (games, firefox [windowed and full screen], or just sitting on the desktop), and the Automatic Configuration dialog box appears in the center of my screen and shakes the screen.

  Monitor checked button, it is not blocked (before this, don't think I hit a few months...)

  No change, I tried older drivers I had before the update of windows, still didn't try to update the NVIDIA drivers, arrives.

  Reset the monitor through the monitor menu.  Still happens.

  Reset the NVIDIA graphics settings, still happens.

  Installed the update optional windows update for the hp w17e LCD wide display.

  Monitor connection video Cable disconnected to the video card, checked pins, pins are good.  Reconnected.  Still happens.

  Tried to connect to another video on the port of the video card (always the same type of connection).  A reduced frequency, but screen looks flatter and more gray/less dynamic.

  She returned after swapping the video ports when I open the NVIDIA Control Panel.  Didn't jump once while typing this.

  Suggestions?

  Updated several days later.

  After the passage of the screen to the other video port on the back of the computer (vid card has 2 ports I could use, been using a) and disconnect / reinstalling the power cord on the monitor itself, auto config jumped just once shortly after reconnection of everything and not since.

  Weird and intrigues me, but hey, if it works now, will to run with him.

• Using an automatic configuration file to create bookmarks

  I use an example provided by Mike Kaply to change my automatic configuration file to add bookmarks to the profiles of the users. However, whenever I run FF, instead of bookmarks should be replaced, I get an extra game. So after 5 revival, I have 5 sets of bookmarks that I added.
  Is there a way to avoid this?
  Here is the code I use:
  Add bookmarks
  Components.utils.Import ("resource://gre/modules/Services.jsm");
  var uri = Services.io.newURI ("http://mike.kaply.com", null, null);
  var navBook = Components.classes["@mozilla.org/browser/nav-bookmarks-service;1"].getService(Components.interfaces.nsINavBookmarksService);
  create new folder
  var FolderId = navBook.createFolder (navBook.bookmarksMenuFolder, "New folder", 0);
  Add bookmark to newly created folder
  navBook.insertBookmark (SCCCFolderId, uri,-1, "Mike's Blog");

  In the end, I had to write code using a loop with an if statement then look for an existing bookmark. Of course it's a little more complicated than that.
  It was not easy, but I am able to do what I have to.

• Since I downloaded El Capitan I get a notice of entry of device of 'Santa Barbara School District' saying that they can automatically configure my Mac!... I don't want that at all

  Since I downloaded El Capitan I get a notice of entry of device of 'Santa Barbara School District' saying that they can automatically configure my Mac!... I don't want that at all!... It appears every 30 minutes or so... El Capitan is safe?

  The computer has a serial number which is included in a registration of devices belonging to an organization. If you do not belong to this organization and that you didn't acquire the device with him, then there was an error or the device (or the logic board) is stolen. If the unit was purchased used, for example on Ebay, or if the card has been replaced by an unauthorized service provider, then it is almost certainly stolen goods. Otherwise, you must take the device to an Apple Store or to an other authorized service provider to have serial number has changed. May asked you proof of ownership.

• Monitor the problem flashing on the reactivation of the computer.

  Monitor the problem flashing on the reactivation of the computer.

  I have a new HP laptop G60 - 243 CL of Costco and a new HP W2207h monitor. The screen flashes when the laptop wakes fashion "sleep" with the HDMI cable connected. It works very well with the VGA cable. Any assistance in finding the cause would be much appreciated. Here is my hardware spes and a newspaper detailed observations.

  Thanks in advance,

  Paul

  --

  HP W2207h monitor

  680 x 1050 hz @60

  Laptop:

  HP G60 - 243 CL

  AMD Turion X 2 RM - 72 2.1 GHz

  3 GB RAM DDR2

  320 GB SATA, 5400 RPM HARD DRIVE,

  NVIDIA GeForce 8200 M G, with up to 1407 MB total graphics memory (shared).

  16 "16:9 1366 x 768 display

  Drive x drive LightScribe 8 with support double layer
  HDMI

  Here is my log.

  25/01/09

  1 unpack the monitor. With mobile connection cables on: HDMI, USB, power Turn on the monitor. It flashes. Black for about 2 seconds, then the light for a split second, repeat, ongoing. Turn off monitor, the driver of the CD W2207h monitor, restart. Monitor works normally.

  The monitor HP w2207h Readme says driver using driver Nvidia 10.65 or later version.

  The Control Panel on the computer laptop G60, NVIDIA GeForce 8200 M g: Device driver 7.15.11.7614, 11/07/2008 (this is the latest driver from the HP support page. See on 27-01-08 below).

  Install W2207h Monitor driver CD and restart the computer. Control Panel, device, Manager I see two monitors, the two "monitor PNP generic", first Hardware ID "MONITOR\HWP26A8", the second "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  2 put the laptop into sleep mode. Wake the portable computer and monitor flashes market, as described in (1). Image appears normally while the monitor is turned on for fraction of a second intervals. If reboot laptop, follow the work properly.

  Occasionally, flashing monitor heal without rebooting. Out of about 10-15 tent: once the monitor began to function properly while the computer shuts down. Once the monitor was OK on the reactivation of the laptop. Once, while the screen flashes, I removed the USB cable and the monitor started working. None of this is repeatable.

  3 removed the HDMI cable and started using the VGA cable and an audio cable. No more flashing on the reactivation of the computer. Very repeatable. About 7 7 times.

  01/26/09

  Control Panel, two monitors, Device Manager, the two "monitor PNP generic," first of all we have the Hardware ID "MONITOR\HWP26A8", second is "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  27/01/08

  Download NVIDIA drivers

  Downloaded from Nvidia support: Version 179,28, 2008-12-18, 179.28_notebook_winvista_32bit_beta.exe Beta (attention: are not supported by the laptop to the manufacturer.)

  HP support: Version 7.15.11.7614 has, 2008-09-08, sp40385.exe (same version that is installed.

  Version of the driver installed is the same that the one on HP support site, so did not not update driver.

  w2207h monitor download driver

  Download and install A Rev 2.0, 4.0.100.1189, 2008-10-16

  Version of the file now reads 6.0.6001.18000 (longhorn_rtm.080118 - 1840), I think it's the same as the driver already installed.

  Flashing problem is unchanged.

  –

  end

  It was the monitor! I brought my laptop and a HDMI cable at Staples where I bought the monitor and tried on the w2207h on set. It has worked well. Took the phone in and out of fashion 'sleep' several times. I'm in the store week return policy 2 stables will replace it. The seller was very accomodating to let me try different monitors with HDMI and VGA cables and my laptop while I was there. I even brought in a large piece of cardboard to protect the ceiling :).

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• Impossible to connect a computer to the wireless network, I would like to first of all the automatic configuration service and I need advice.

  Article 861122 start WZC

  Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TX

  Hello

  • Are you referring to Wireless Zero Configuration (WZC) Service?
  • What happens when you start the automatic Wireless Configuration Service?
  • You receive an error message?
   
  If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.
  Click run in the file download dialog box, and then follow the steps in this wizard.
  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
   
  See also:
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

• How to enable the automatic configuration service in Windows XP

  How to enable the automatic configuration service in Windows XP

  Hi SamuelOkon,

  Are you facing any problem on your computer?

  You can follow the steps in this link & check if it helps.

  How to activate the Wireless Auto Configuration startup type?

  Hope the helps of information.
  Please post back and we do know.

• How to use the automatic configuration wizard and where can I FIND?

  How to use the automatic configuration wizard and where can I FIND?

  Hi TannySmedt,

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

• Cannot display networks wireless range... impossible to start the Automatic Configuration service

  My wireless card says it works correctly, but when I try to choose a network I get "Windows cannot configure this wireless connection" and I'm not smart enough to understand how to start the automatic configuration service.

  Hello

  If there is no 3rd party utility running (as mentioned by Steve), or you disabled loan and lost WZC.

  Maybe this can help, http://www.ezlan.net/wzc.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Automatic configuration does not...

  I bought a 2nd wre54g and automatic configuration does not work... I tried for an hour... light remains red link... I tried the reset button but same thing... My only other works fine... all ideas except repair... I have only one at a time if it is not the problem... Thank you

  Thanks for your reply... I managed to do work using the ethernet cable to set it up, and now it works.

• VBscript - how to disable 'Use Automatic configuration Script'

  Hello

  I currently have the script in a vbs file. below

  Const HKEY_CURRENT_USER = & H80000001
  Set objShell = CreateObject ("WScript.Shell")
  strPC = objShell.ExpandEnvironmentStrings("%COMPUTERNAME%") "

  On Error Resume Next

  Set objReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")

  strKeyPath = "Software\Microsoft\Windows\CurrentVersion\Internet settings"
  strValueName = "ProxyEnable".

  objReg.GetDWORDValue HKEY_CURRENT_USER, strKeyPath, strValueName and dwValue

  '#==============================================================================
  '# Proxy of IE if is currently on display message and ask the user if he
  '# should then be disabled
  '#==============================================================================
  If dwValue = 1 Then
  IEPrompt = MsgBox ("Hello David.") Your Proxy is on, you want to turn it off? (", vbQuestion + vbYesNo,"disable IE Proxy")
  If IEPrompt = vbYes Then
  dwValue = 0
  objReg.SetDWORDValue HKEY_CURRENT_USER, strKeyPath, strValueName and dwValue
  MsgBox "Thank you David, your proxy is now off.» "Have a nice day" & _
  ".", vbInformation, "off of the Proxy IE.
  ElseIf IEPrompt = vbNo Then
  MsgBox "David, your Proxy is always on" & _
  ".", vbInformation, "off of the Proxy IE.
  End If
  '#==============================================================================
  '# If IE Proxy is currently disabled display message and ask the user if he
  '# must then be activated
  '#==============================================================================
  Else if dwValue = 0 Then
  IEPrompt = MsgBox ("Hello David.") Your Proxy Server is turned off, you want to turn on? (", vbQuestion + vbYesNo,"activate IE Proxy")
  If IEPrompt = vbYes Then
  dwValue = 1
  objReg.SetDWORDValue HKEY_CURRENT_USER, strKeyPath, strValueName and dwValue
  MsgBox "Thank you David, your proxy is now on." Have a wonderful day"& _
  ".", vbInformation, "enable Proxy from IE.
  ElseIf IEPrompt = vbNo Then
  MsgBox "David, your Proxy is always on" & _
  ".", vbInformation, "enable Proxy from IE.
  End If
  End If

  This only disables the proxy server in Internet Explorer/Tools/Options/connections/Lan Settings.

  I get this same code to enable check boxes "Automatic Configuration" instead of or as well?

  Thank you very much

  Luke

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Automatic configuration service ipv6 has any special installation?

  When I run the

  automatic configuration service IPv6 address

  order of the interface fa0/0 R2, R3 on the other end is configured with a static global unicast address, should R2 use NDP and find the prefix and eui - 64 to make the host ID without the need for any other configuration specail?

  Or I have to correctly answer to R2 R3 value?

  For the moment, I do this in GN3 but R2 is only coming up with a link-local address.

  Thanks in advance.

  Hello

  by default, Cisco routers behave as IPv6 hosts until ipv6, unicast routing is configured in global configuration mode and then it starts sending RAs and response to the RS of the device that is configured on an interface SLAAC.

  Then configure this command on R3 and R2 will obtain a prefix of R3 and use EUI64 to complete the host Party.

  Kind regards.

  Alain

  Remember messages useful rate.

• run the automatic configuration in test mode

  Hello

  How to run the automatic configuration in test mode?

  I looked adutilities document (Maintenance tools) but did not.

  Thank you.

  $AD_TOP/bin/adchkcfg.sh contextfile = appspass =

  Check the log file after the command is completed to find the information about the changes that Autoconfig will do if it is executed.

• Automatic configuration - stop application tier services on all nodes?

  Hi all

  Our application R12 application tier is on several nodes. My question is when we run on application layer Metn autoconfig, made you must stop the services from the application layer on all nodes of the application level? or just stop the services on the node on the automatic configuration service.

  Thank you and best regards,

  Yes, stop the application on all nodes (level apps) services before you run the automatic configuration. Then run auto configuration on each node one by one.

  Concerning

  Arizuddin