Automatic configuration of AppPortal
I know that it is possible to configure the appportal with an xml file via paper or DNS registry key, but unfortunately not of these solutions are appropriate for us. So my question is, is it possible to deploy appportal to the client via SCCM with predefined configuration. Perhaps with an ini file. I also have thonkig on U3 of AppPortal version. Everyone works with it?
Thank you to
Best regards, Robert
Hi Robert,.
Thanks for the additional information.
We do not have a documented for SCCM deployment method, but it may be possible to do if it can be used to deploy it by using one of our current methods.
A final option, that we have not mentioned so far is the ability to provide the file config.xml as a file by e-mail to users, not the more automated method, but it would be a simple approach.
Kind regards
David
Tags: Dell Tech
Similar Questions
-
Using an automatic configuration file to create bookmarks
I use an example provided by Mike Kaply to change my automatic configuration file to add bookmarks to the profiles of the users. However, whenever I run FF, instead of bookmarks should be replaced, I get an extra game. So after 5 revival, I have 5 sets of bookmarks that I added.
Is there a way to avoid this?
Here is the code I use:
Add bookmarks
Components.utils.Import ("resource://gre/modules/Services.jsm");
var uri = Services.io.newURI ("http://mike.kaply.com", null, null);
var navBook = Components.classes["@mozilla.org/browser/nav-bookmarks-service;1"].getService(Components.interfaces.nsINavBookmarksService);
create new folder
var FolderId = navBook.createFolder (navBook.bookmarksMenuFolder, "New folder", 0);
Add bookmark to newly created folder
navBook.insertBookmark (SCCCFolderId, uri,-1, "Mike's Blog");In the end, I had to write code using a loop with an if statement then look for an existing bookmark. Of course it's a little more complicated than that.
It was not easy, but I am able to do what I have to. -
Since I downloaded El Capitan I get a notice of entry of device of 'Santa Barbara School District' saying that they can automatically configure my Mac!... I don't want that at all!... It appears every 30 minutes or so... El Capitan is safe?
The computer has a serial number which is included in a registration of devices belonging to an organization. If you do not belong to this organization and that you didn't acquire the device with him, then there was an error or the device (or the logic board) is stolen. If the unit was purchased used, for example on Ebay, or if the card has been replaced by an unauthorized service provider, then it is almost certainly stolen goods. Otherwise, you must take the device to an Apple Store or to an other authorized service provider to have serial number has changed. May asked you proof of ownership.
-
Automatic configuration of the HP w17e monitor active at random
Currently using an hp w17e flat, wide LCD screen connected to a NVIDIA 9500 GT video card located in a computer that is running Windows Vista Edition home premium (32 bit). Running on 1440 x 900, 60 Hz frequency suggested by the insertion of the packaging of refreshment. Also in the 32-bit color setting.
(Other computer stats available at http://www.compusa.com/applications/searchtools/item-Details.asp?EdpNo=4419976&sku=T71-3446%20ON&srkey=3000%20H210%2057088788)
Tuesday night (13/10/2009) let my computer playing music with the monitor off. Morning, Weds(10/14/2009) and any platform is off. Turn it turn it back on and seems to update windows pushed a lot of updates. Then I noticed the problem. Randomly, the automatic configuration of hardware on the monitor turns on. Tried different applications (games, firefox [windowed and full screen], or just sitting on the desktop), and the Automatic Configuration dialog box appears in the center of my screen and shakes the screen.
Monitor checked button, it is not blocked (before this, don't think I hit a few months...)
No change, I tried older drivers I had before the update of windows, still didn't try to update the NVIDIA drivers, arrives.
Reset the monitor through the monitor menu. Still happens.
Reset the NVIDIA graphics settings, still happens.
Installed the update optional windows update for the hp w17e LCD wide display.
Monitor connection video Cable disconnected to the video card, checked pins, pins are good. Reconnected. Still happens.
Tried to connect to another video on the port of the video card (always the same type of connection). A reduced frequency, but screen looks flatter and more gray/less dynamic.
She returned after swapping the video ports when I open the NVIDIA Control Panel. Didn't jump once while typing this.
Suggestions?
Updated several days later.
After the passage of the screen to the other video port on the back of the computer (vid card has 2 ports I could use, been using a) and disconnect / reinstalling the power cord on the monitor itself, auto config jumped just once shortly after reconnection of everything and not since.
Weird and intrigues me, but hey, if it works now, will to run with him.
-
Article 861122 start WZC
Unable to connect a computer to the network wirelee I firstly the WZC serviceand I need advice. TXHello
- Are you referring to Wireless Zero Configuration (WZC) Service?
- What happens when you start the automatic Wireless Configuration Service?
- You receive an error message?
If you experience problems with the wireless network, reconfigure the Automatic Configuration Wireless for all wireless profiles automatically, click the fix this toolfrom the link below.Click run in the file download dialog box, and then follow the steps in this wizard.See also:In Windows network connection issues -
How to enable the automatic configuration service in Windows XP
How to enable the automatic configuration service in Windows XP
Hi SamuelOkon,
Are you facing any problem on your computer?
You can follow the steps in this link & check if it helps.
How to activate the Wireless Auto Configuration startup type?
Hope the helps of information.
Please post back and we do know. -
How to use the automatic configuration wizard and where can I FIND?
How to use the automatic configuration wizard and where can I FIND?
Hi TannySmedt,
To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel. If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools. If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic. This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the automatic Wireless Configuration service zero wireless and click on the OK button.
The automatic Wireless Configuration can also be started and stopped from a command prompt. To start the automatic Wireless Configuration, run the following command:
net start wzcsvc
To stop the automatic Wireless Configuration, run the following command:
net stop wzcsvc
-
My wireless card says it works correctly, but when I try to choose a network I get "Windows cannot configure this wireless connection" and I'm not smart enough to understand how to start the automatic configuration service.
Hello
If there is no 3rd party utility running (as mentioned by Steve), or you disabled loan and lost WZC.
Maybe this can help, http://www.ezlan.net/wzc.html
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
Automatic configuration does not...
I bought a 2nd wre54g and automatic configuration does not work... I tried for an hour... light remains red link... I tried the reset button but same thing... My only other works fine... all ideas except repair... I have only one at a time if it is not the problem... Thank you
Thanks for your reply... I managed to do work using the ethernet cable to set it up, and now it works.
-
VBscript - how to disable 'Use Automatic configuration Script'
Hello
I currently have the script in a vbs file. below
Const HKEY_CURRENT_USER = & H80000001
Set objShell = CreateObject ("WScript.Shell")
strPC = objShell.ExpandEnvironmentStrings("%COMPUTERNAME%") "On Error Resume Next
Set objReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
strKeyPath = "Software\Microsoft\Windows\CurrentVersion\Internet settings"
strValueName = "ProxyEnable".objReg.GetDWORDValue HKEY_CURRENT_USER, strKeyPath, strValueName and dwValue
'#==============================================================================
'# Proxy of IE if is currently on display message and ask the user if he
'# should then be disabled
'#==============================================================================
If dwValue = 1 Then
IEPrompt = MsgBox ("Hello David.") Your Proxy is on, you want to turn it off? (", vbQuestion + vbYesNo,"disable IE Proxy")
If IEPrompt = vbYes Then
dwValue = 0
objReg.SetDWORDValue HKEY_CURRENT_USER, strKeyPath, strValueName and dwValue
MsgBox "Thank you David, your proxy is now off.» "Have a nice day" & _
".", vbInformation, "off of the Proxy IE.
ElseIf IEPrompt = vbNo Then
MsgBox "David, your Proxy is always on" & _
".", vbInformation, "off of the Proxy IE.
End If
'#==============================================================================
'# If IE Proxy is currently disabled display message and ask the user if he
'# must then be activated
'#==============================================================================
Else if dwValue = 0 Then
IEPrompt = MsgBox ("Hello David.") Your Proxy Server is turned off, you want to turn on? (", vbQuestion + vbYesNo,"activate IE Proxy")
If IEPrompt = vbYes Then
dwValue = 1
objReg.SetDWORDValue HKEY_CURRENT_USER, strKeyPath, strValueName and dwValue
MsgBox "Thank you David, your proxy is now on." Have a wonderful day"& _
".", vbInformation, "enable Proxy from IE.
ElseIf IEPrompt = vbNo Then
MsgBox "David, your Proxy is always on" & _
".", vbInformation, "enable Proxy from IE.
End If
End IfThis only disables the proxy server in Internet Explorer/Tools/Options/connections/Lan Settings.
I get this same code to enable check boxes "Automatic Configuration" instead of or as well?
Thank you very much
Luke
This issue is beyond the scope of this site and must be placed on Technet or MSDN -
Automatic configuration service ipv6 has any special installation?
When I run the
automatic configuration service IPv6 address
order of the interface fa0/0 R2, R3 on the other end is configured with a static global unicast address, should R2 use NDP and find the prefix and eui - 64 to make the host ID without the need for any other configuration specail?
Or I have to correctly answer to R2 R3 value?
For the moment, I do this in GN3 but R2 is only coming up with a link-local address.
Thanks in advance.
Hello
by default, Cisco routers behave as IPv6 hosts until ipv6, unicast routing is configured in global configuration mode and then it starts sending RAs and response to the RS of the device that is configured on an interface SLAAC.
Then configure this command on R3 and R2 will obtain a prefix of R3 and use EUI64 to complete the host Party.
Kind regards.
Alain
Remember messages useful rate.
-
run the automatic configuration in test mode
Hello
How to run the automatic configuration in test mode?
I looked adutilities document (Maintenance tools) but did not.
Thank you.
$AD_TOP/bin/adchkcfg.sh contextfile =
appspass = Check the log file after the command is completed to find the information about the changes that Autoconfig will do if it is executed.
-
Automatic configuration - stop application tier services on all nodes?
Hi all
Our application R12 application tier is on several nodes. My question is when we run on application layer Metn autoconfig, made you must stop the services from the application layer on all nodes of the application level? or just stop the services on the node on the automatic configuration service.
Thank you and best regards,
Yes, stop the application on all nodes (level apps) services before you run the automatic configuration. Then run auto configuration on each node one by one.
Concerning
Arizuddin
-
Hello:
Executing automatic configuration as part of the migration of linux he "s failing in the jtfictx.sh script we try to recreate the index but failed with the following @/ap00/immtex/apps/apps_st/appl/jtf/12.0.0/patch/115/sql/jtfiaibu.sql, JTFAPPS
Connected. DECLARE * ERROR at line 1:
ORA-29855: an error has occurred in the execution of routine ODCIINDEXCREATE
ORA-06540: PL/SQL: ORA-06553 compilation error:
PLS-907: unable to load library CTXSYS unit. DR_DEF (referenced by CTXSYS. DRIPREF)
ORA-01403: no data available ORA-06512: at "SYS." DBMS_SQL", line 1199
ORA-06512: at line 37 level
We already follow with no luck: on 11.2.0.2 CTX_DDL. OPTIMIZE_INDEX fails with error ORA-20000 vacuum (Doc ID 1275100.1) Autoconfig is failure with "DRG-10561: Index Jtf_amv_items_url_ctx is invalid for requested" error (Doc ID 1334405.1()
Thanks and regards.
Please log an SR for that matter.
Thank you
Hussein
-
Activate the automatic configuration.
After migration DB to 11g release how to re-enable AutoConfig.
Please suggest some docs to activate the automatic configuration.
Kind regards.
Published by: 836778 on April 26, 2011 21:10For 11i, please see (by using AutoConfig to manage the Configurations of the system with the Oracle Applications 11i [165195.1 ID]).
For R12, please see (using AutoConfig to manage system Configurations in Oracle E-Business Suite Release 12 [387859.1 ID])-"" 3.2. Section activation on a new Oracle Home AutoConfig".
You can also check:
How to recreate the directory/scripts / / appsutil [377495.1 ID]
How to find the .env file after the upgrade to EBS 11.5.10.2 with 9i and 10g database? [1295567.1 ID]Thank you
Hussein
Maybe you are looking for
-
YouTube won't play due to the error in reading.
In the last two days, I was not able to view videos YouTube on Firefox. It comes up with the "year error occurred." Please try again later. "message. I don't have this problem in Chrome.
-
When I download software or files to the download window opens, the file downloads and is virus scanned and then a message appears saying: "Download Statusbar: virus scan could not start, check the configuration. I had an installation options when I
-
Hello last night, I was working on my laptop, I realize that my battery is low. so I put for loading... after a while, I realized that the battery is 75% charged so that I disconnect it. and my laptop turns off. the laptop refused more late start...
-
Hello How can I have a Custom Button skin class which will allow me to have a dynamic text? for example, if I have just a normal button and add a label inside the skin, when I try to update the label string nothing happens. There is no this.layout fu
-
I'm putting my Panasonic SC-V210 camcorder on my pc so I can then upload video footage via my pc to a disk. My pc is not identify my device, I tried this on another computer and it accepts it. I am running windows 7. Thank you.