Automatic control of the channel select

Similar Questions

• Selection tool automatically switching to the direct Selection tool, grabbing a picture box

  Seems that when I'm grabbing an image placed in Indesign CS5, it automatically switches to the direct Selection tool and grabbing the image instead of its container. I'm doing something wrong? I have to do it several times before I can enter the container and the image, instead of just the image.

  Any tips? I've only noticed this in CS5.

  It seems the content grabber, see you a "donut" are also?  If yes go to view > Extras and click on hide content Grabber or go here and learn how to use it, apparently, some find it useful, personally I don't.

• In the VI library OR: extract, control of the channel numbers are loaded automatically every time that the VI is open with "count to five: a 2 three 4.0 five." Whence this string of data?

  Even after the removal of the string "count to five: a 2 3 4.» 5."since the control of the chain and its replacement by another string, the original string returns after that the VI has been saved then reopened. Whence this string of data? I have attached a copy of the library feature. In my application, I was able to work around the problem by replacing the chain with a constant string control. But I'm still curious to know what is happening.

  Thank you
  Chuck

  Chuck,

  Chain drive was scheduled by default with the string you see.  To change it, enter the new string, right-click on the control and select

  Operations on the data > default font of the current value

  Now, save your vi.

• Capsule - save the channel selection

  Hi guys.

  I have Time Capsule 3 to with 7.7.3 firmware.

  If I change 'Radio channel Selection' to 'manual' mode and adjust the channels that I need and press the "Update" button - after devices it still restarts use automatic channel selection. Is a way to fix it?

  Thank you!

  Where do you stand in the world? It is Europe that has this problem.

  And I need to the right of the box model number, as that will include your area code.

  There are tougher laws to prevent people setting illegal channels in your area... so if you put a country with different laws of yours and set a wireless channel that is not legal in your area, the TC will close without applying the changes.

  Apple seems to have anticipated this rule change and still 2 years ago put in work in the 7.7.3 firmware.

  Test it using only 2.4 ghz, then set it to channel 8 as a channel that is legal everywhere... let alone 5 GHz for now... it works?

• Automatic control of the file Backup Log alert

  Hello-
  
  Is there a setting in the 11g database which must be configured to write to the log alerts when the controlfile is self-protected?
  I have this set up but there is no entry in the newspapers to alert for 11g databases.
  I have them in my alert logs of 10g.
  
  Thank you-

  No, there is no such setting.

  It seems that Oracle 11 g does no alerts journal entry when the control file is automatically saved but rather written in a trace file in the diagnostic_dest directory tree:

  Trace file /u01/app/oracle/diag/rdbms/db112/DB112/trace/DB112_ora_5837.trc
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  ORACLE_HOME = /u01/app/oracle/product/11.2.0/EE
  System name:    Linux
  Node name:      lx01.localdomain
  Release:        2.6.18-92.el5
  Version:        #1 SMP Fri May 23 22:17:30 EDT 2008
  Machine:        i686
  Instance name: DB112
  Redo thread mounted by this instance: 1
  Oracle process number: 29
  Unix process pid: 5837, image: [email protected] (TNS V1-V3)
  
  *** 2011-04-18 19:21:39.223
  *** SESSION ID:(17.34) 2011-04-18 19:21:39.223
  *** CLIENT ID:() 2011-04-18 19:21:39.223
  *** SERVICE NAME:(SYS$USERS) 2011-04-18 19:21:39.223
  *** MODULE NAME:(backup full datafile) 2011-04-18 19:21:39.223
  *** ACTION NAME:(0000023 STARTED111) 2011-04-18 19:21:39.223
  
  Starting control autobackup
  
  *** 2011-04-18 19:21:40.050
  Control autobackup written to DISK device
          handle '/tmp/c-732354255-20110418-011'
  

  Edited by: P. Forstmann on 18 Apr. 2011 19:25

• automatic control in the flow of work flow

  Hello
  
  I use jdev 11.1.2.2.0
  
  I have a workflow with 3 pages (p1, p2, p3). each page wil have an output text.
  
  My requirement is with out having more buttons command or something... Firstly it must view page1, then after 10 seconds it should go to page 2 automatically
  then, after 10 sec, he should go to page 3
  
  Thanks in advance
  RAK-

  You can put an af:poll to page 1 and page 2 component that you initialize with the amount of time you want to wait (10 sec). After 10 seconds, the pollListener is called. This listener is implemented in a bean that queue of an event on a hidden button (or navigation directly). The button is hidden on the page but it goes to the second page. Here, do you the same thing.

  Timo

• Saving channels selected as .tdm

  I have a set of data from 1300 channels.  It is saved in a file .tdm.  I try to use the function "save the channels selected in the data portal" to save a new set of data (like a .tdm) which includes only some of the 1300 channels.  When I try to register, I get an error message "error message from the command kernel DIAdem: the channel list can have only a maximum of 255 characters.»  "Order: DataFileSaveSel (FileDlgFileName, FileDlgFilter, DataCheckChnls).

  Am I exceeding a limit to tiara, or I just need to change some parameter of handling data?

  Hello SSHRC Tstr,

  It seems that this problem has been fixed in DIAdem 10.1 or 10.2 tiara there is no way to solve this problem in 10.0.

  But (there is usually one "but", right?), the following workaround solution should help you solve this problem in DIAdem 10.0:

  1 copy all the channels that you want to put into a single group in the data portal

  2. in the BROWSER, click on the tab 'List' to switch to the display of the list of the channels (rather than the 'Structure' view function)

  3. right click on a channel and select the item of menu popup "new channel numbers.

  You
  should now be able to return to the display of 'Structure', select all the
  you want to save and make the channels. The 'trick' here is that the
  channels need to have consecutive channel numbers, which reach us by
  by using the function "New Channel Numbers".

  If you have a
  chance, take a look at version 11 of DIAdem
  (http://zone.ni.com/devzone/cda/tut/p/id/5563), he has really nice
  new features that could make your life a little easier...

• navigation key automatic tab at the front panel

  I'm designing a page of user authentication where there are two controls of the channel and 3 Boolean controls. At runtime, I give input the control to a string, then by a tab, go to the control following the string. Then if I press TAB it's going to one of the Boolean control. But I want to choose a particular boolean after giving the string to the second chain of control and when I press on enter, that particular boolean will be on. I tried to do something in the navigation 'key' in 'Properties' of the Boolean control. But there is no option. Please, help me to do it.

  Thanks to aeastet and Anand P both. I solved my problem with the help of suggestions that both of you have given. Thank you very much for helping me.

• TypeDef/control of the load of a road fixed

  Hi all

  I tried to search but could not find this topic. But I doubt if it has not already, examined in the forum of LabVIEW.

  In my application, I used custom controls. The application has several "pieces" and each of them uses "similar" (but not necessary even) TypeDef controls that I customized to sequel of the game.

  Good feature of LabVIEW is that even if the control file is moved to a different path, he finds and charge it, with a warning. However, in my case, I need to disable this feature for some control files. Is this possible?

  I use files from control with the same name, but they are planned for different screws 'call' If this is not a good practice, I can change the names of each control file, adding a prefix/suffix to the name of the calling application. Each control file becomes unique.

  But still, this will remain a question. Due to small and appropriate names, I often prefer them with a 'typical' name I would give for such control. As in every application, we have a program of 'hand '. And what I faced, the problem is when I loaded a VI, he 'used' automatically control (bearing the same name as one who waits for this VI) which is already loaded (in a way) by an already open another VI, even if the intended control exist in the expected location. He showed a warning, but did not ask "do you want to load the original, or use the one in the memory?

  My question is, is it possible to have a "projected" pathname to be fixed and does not have the VI load the 'recently' opened 'namesake' control under his control expected?

  The feature is good, but in some cases, can shut down us or not?

  Vaibhav says:

  Thanks for the comment Mark!

  Yes, it's true.

  But what about stop unwanted connections of messsing upward in the first place the program? I mean, before you build a project.

  Moreover, if we open a program via the Project Explorer, it would still not allow to open a file whose twin brother is already in the memory. But will it scream before assuming a new connection on its own?

  No, the projects work like libraries. Once you have the screw in a project of his name is modified internally, or least how to locate the disk which allows you to open both projects at the same time. The trick here is to get the job done through projects rather than opening the screw directly. As long as you work through the projects themselves, you can use two screws or different typedefs bearing the same name located in different directories at the same time. It's as long as each of them is a member of another project.

• Scan interval for the automatic selection of the channel?

  E2500 or this mater no matter what wireless router - what is the interval between scans of the network to maintain the router on the best channel when it is configured to automatically choose the channel? Is there such an interval? Or he analyzes networks only when the currently selected channel performance falls below certain threshold? Is there a way to force manually the router to find the best channels when I feel the performance is quite degraded?

  Most of the routers more do the scan on Power ON. Some latest generation routers may have a sweep feature more active who can do a scan intermittently to check the surroundings. For most older routers, I recommend you to manually set the channels 1, 6 or 11 after you have scanned your own environment and find the best way to use that is not used or has limited use at a distance of nieghbors:

  Link > http://www.techspot.com/downloads/5936-inssider.html allows to discover.

  http://en.Wikipedia.org/wiki/List_of_WLAN_channels

• I do not understand this statement "It is a good idea to keep track that uses a bunch of Audio channels selected in the arrange window, unless you actively play or record on a software Instrument."

  It's a good idea to keep track that uses a bunch of Audio channels selected in the arrange window, unless you actively play or record on a software Instrument.

  Which no longer applies in Logic Pro X 10.2.3. In old versions of logic, selecting a range with a software instrument automatically would make this instrument in "Live" mode, which means that the instrument has begun to transform any MIDI in sound with a minimum of delay. This direct mode becomes an instrument need CPU power (on a single processor) and peut overload the audio engine. It is a waste of CPU if there is no direct game. Then select an audio track would ensure that No instrument is in direct mode. Now (LPX 10.2.2 or more) in direct mode can be turned on or off on a track, chosen or not - it is the R button on the track header.

• I'm upgrading Firefox 20.0 but not automatically connect to the server, just hangs. Why? 19.0.2 States that it is "free" update channels: what is it?

  Regularly alert is displayed to update me to 20.0 but it does not connect to the server - even if I have no problem with the modem at another time. It just hangs there. I thought that Firefox will update automatically. I have topped up, as advised but still 19.0.2. On the message States, I am currently on the channel "update of output". What does that mean? Do I need an update? Why?

  "update of output" means that you are using the stable version of Mozilla Firefox.

  Have you tried to reset firefox and then runs the update to verify that it contains that you are to the latest version?
  https://support.Mozilla.org/en-us/KB/reset-Firefox-easily-fix-most-problems

• How to control automatic shutdown when the battery is discharged using Windows

  The laptop stops right in the Middle something without notice.

  Even after that I formatted the system, he still stops automatically when the battery is low, without advising me of either the low battery status or the judgment.

  I don't think that the cause of the problem is the power management because it is set to balanced.

  How can I control when the pc stops?

  Hello

  Usually, you can change these settings within the Windows power management.
  Using Win 7 or Win 8/8.1?

  Here is the Nice technical document about the features of Windows 7 power management
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Check the last option called: battery.
  It provides many useful features such as low battery, critical battery level, low battery action or critical battery action

• Can I programmatically select a control in the chain?

  I'm trying to programmatically select a control of the chain on the front panel for use with a scanner. The scanner will scan a bar code, and then write the data. It basically as a keyboard. Is it possible to programmatically select a control of the chain without going through the user click the control on the front panel?

  Just use a key Focus property node. Right click, create > property Node > Focus button. Change to write and connect a true him.

• Can I read out the channel of AI to control ao channel?

  Hello

  I use a USB-6211 to acquire two voltage signals synchronized to an LVDT (ai0) and a load cell (ai1). LVDT signal and load cell already amplified and conditioned before travelling in the ADF. LVDT and scale read displacement and force on a rod having position is controlled by a linear actuator. The actuator is controlled by a voltage waveform coming out of the 6211 (ao0). Is it possible to reference each input signal (one or the other, perhaps based on a Boolean value) to control the amplitude with the output signal?

  For example, if I wanted to move the stem a specific distance or press the stem into something with a certain force, could I refer to the distance or the strength of the input signal of the channels to set the amplitude of the signal ao AI?

  I guess what I would really like to do is to close the loop on the actuator so that it knows where it is in terms of force and distance. Is it possible using this material?

  USB-6211 (http://sine.ni.com/nips/cds/view/p/lang/en/nid/203190)

  Best,

  amproctor

  If you do a sample or wave? I have not found a typical...

  See the wink, it's here Sample sample. The Subvi icon has your correction formula.