Automatic demotion of the Anyconnect Client (router IOS)
Hello
We run a Cisco Anyconnect client with a router IOS environment (2921) as the lead aircraft.
We have upgraded the client package on the router to the latest version 3.1.13015. After installing this package on the customers, we discovered a bug. Windows-based computers are not able to establish a VPN connection more (authentication and auto-package-level still works, but then an error message is displayed ("unable to cannot" or similar).)
I returned the package on the router back to an older version (3.1.11004), but is not beeing auto-installe when a client with the new version (buggy) connects.
Is it possible to configure the router to force a downgrade to the customers, or is the only way to workaround to manually uninstall the package on clients?
Thank you
Heinz
No you can't auto-downgrade the station clients.
Unfortunately, you will need to uninstall it from the client end, then get the right package (older) of the router.
Tags: Cisco Security
Similar Questions
-
Using VPN to push the update of the AnyConnect client
Hello - we would use our ASA VPN device to push the latest AnyConnect to our user base. Previously, due to the requirement that the user has administrator rights to install, we could not do this and had to return to SCCM to push upgrades the AnyConnect client. We now have software that will allow the client to load as an administrator, even if the user is not an administrator on the system. Viewfinity is the name of the software.
My question is on the speed control. I don't want to set up the VPN to push the new AnyConnect, and every user who logs in then gets the installation. We would rather control, based on the group if possible, which gets the new client. This limits the risk if there is a problem to a subset of VPN users and not all that connect and you're trying to download. I can't find a config or config guide which indicates that it is possible. What is there, no one knows if it is or isn't an option? If this isn't the case, we would have to assume a lot of risk for new customers of 1100 deployment in a day, a number of type we plugged on any given business day. Please notify.
Thank you very much for your help.
The f
Hi Jeff,
There is no option to enable the auto update by connecton profile.
What you can do however, is to disable this feature on the XML profile, since the XML profile can be defined by group policy, you simply deploy the profile either by having users connect to the specific group tunnel where group policy with the No auto update profile XML or deploy the XML profile manually on each machine.
Please see this:
Automatic update
true
(Default) Automatically install new packages.
fake
Doesn't install new pacakges.
In the profile XML (to disable):
fake
Where to find the profile?
OPERATING SYSTEM
The directory path
Windows 7 and Vista
C:\ProgramData\Cisco\Cisco AnyConnect secure mobility Client\Profile\
Windows XP
C:\Document and Settings\All Users\Application Data\Cisco\Cisco AnyConnect secure mobility Client\Profile
MAC OS X and Linux
/ opt/cisco/anyconnect/profile /.
Let me know.
Thank you.
Portu.
Please note all messages that you find useful.
Post edited by: Javier Portuguez
-
SSL VPN without disabled in ASA5505 after the Activation of the AnyConnect client
Hello everyone,
I am facing a problem with the VPN service in ASA 5505. Initially, I was using SSL VPN without customer who was working absolutely fine, no problem. Recently I bought AnyConnect Essentials License with license AnyConnect VPN, Mobile (for focusing on the Client SSL VPN Service for desktop and mobile respectively) and have activated these keys inside of the firewall. After that I may be able to connect to based on the VPN Client, using the AnyConnect client. Clientless VPN access is not allowing you to connect and displays an error (see the attached screenshot).
I created two VPN profiles Viz, basic (for clientless VPN) and rvsvpn (for client based VPN). Download the AnyConnect Client I can connect to the rvsvpn profile. But if I try to connect using the basic profile, it throws an error has been to what is displayed in the exhibition.
Please help me in this regard, as what can be done to use both the vpn connection profile. Or what the use of AnyConnect disables client access?
Waiting for your help.
Thanks in advance.
Samrat.
"Anyconnect essentials" in your configuration command to disable all profiles without customer (as well as other features that require the Premium license).
Essentials and Premium are mutually exclusive as the performance of duties. You can have both installed licenses, but only use one or the other (and never both at once) in your running configuration.
-
Option 'The Anyconnect client profile' missing in ASDM
Hello
I am trying to configure Anyconnect on the SAA and have successfully updated licensing, as well as downloaded the pkg anyconnect for web deployment. I activated anyconnect on the external interface and can now have the ASA push the client machine. Works very well. However, I would like to add the backup servers that the client will attempt to reach where the primary is down. I understand that "customer profiles" can be created to customize the parameters as follows. Problem is, when I followed the setup guide with instructions for the manufacture of customer profiles here:
It shows that I should have an option for the Anyconnect Client profile and settings of the Anyconnect Client.
I don't have one of these options in ASDM. Here's what it shows mine:
I have another 'Profiles of Client SSL' option, but it does not appear the same as the above.
Can anyone help with what I have to do to get the customer profiles option to be available, so I can add backup server for the customer information? Thank you!
It could be your version ASDM. I note, however, that the Release Notes for ASDM for 6.3 (1) Note that this version (when combined with the support ASA 8.3 (1)) introduced the AnyConnect profile editor.
You can run the 6.4 (7) Version ASDM curent with your ASA remaining on 8.2 (1). It would not hurt to try this.
A little more awkward alternative is to use the stand-alone profile AnyConnect editor and manually deploy the xml profiles that result.
-
Username, preserved in the AnyConnect Client user name dialog box
I have one question remains on my client anyconnect 2.5.2006. The user in the dialog box name is cached. We do not want to be cached and have users to enter their username every time.
Shilpa Gupta mentioned on another post of mine. I was wondering if anyone has any other thoughts! The 2.5.2006 resolved customer I had another question, so come back to 2.4 is not an option at this point.
For clearing up the credentials in the dialog box when using AnyConnect I found one of the bug:-
Symptom:
User credentials are cached in the preferences.xml file when you use the Anyconnect client. So when they revive Anyconnect, the user name is displayed in the client.
Conditions:
You can see all the client anyconnect. It is a configurable option in the IPSec client.
Workaround solution:
Currently there is no work around
And I can see it resolved in 2.4.202 however, I'm not sure if its fixed in 2.5 also. For this I would like to hear from others.
Kind regards
Shilpa
Hello
All bug fixes and new features in 2.4.x are also in 2.5.
However the "bug" Shilpa has pointed out, is not really a bug, but an enhancement request, in other words in 2.3 before the cached username is expected behavior and is always the default behavior in the 'fixed' versions, so just the upgrade won't change anything. What has changed is that now you can change the behavior by defining a new parameter RestrictPreferenceCaching in the local policy file:
So for example the addition
All
your local police should achieve what you want.
HTH
Herbert
-
Cannot ping the Anyconnect client IP address to LAN
Hi guys,.
I have an old ASA5520 running 9.1 (6) 8 where I installed Anyconnect SSL split tunneling access:
See establishing group policy enforcement
attributes of Group Policy DfltGrpPolicy
VPN-tunnel-Protocol ikev1, ikev2 clientless ssllanwan-gp group policy internal
gp-lanwan group policy attributes
WINS server no
DNS server no
VPN - connections 1
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value lanwan-acl
by default no
WebVPN
AnyConnect value lanwan-profile user type profilespermit for line lanwan-acl access-list 1 standard 172.16.0.0 255.254.0.0 (hitcnt = 48) 0xb5bbee32
Now I can ping, RDP, etc. of any VPN host connected to any destination within 172.16.0.0 255.254.0.0 range.
Here is my routing information:
See the road race
Route outside 0.0.0.0 0.0.0.0 69.77.43.1 1
Route inside 172.16.0.0 255.254.0.0 172.25.8.1 1interface GigabitEthernet0/1
nameif inside
security-level 100
IP 172.25.8.4 255.255.254.0But I can't ping any Anyconnect VPN client connected from my LAN.
See the establishment of performance ip local pool
mask IP local pool lanwan-pool 172.25.9.8 - 172.25.9.15 255.255.254.0
Here's the traceroute of LAN:
C:\Users\Florin>tracert d 172.25.9.10
Determination of the route to 172.25.9.10 with a maximum of 30 hops
1 1 ms<1 ms="" 1="" ms="">1>
2<1 ms="" *="">1><1 ms="">1>
3 * the request exceeded.
4 * request timed out.While the ASA routing table has good info:
show route | I have 69.77.43.1
S 172.25.9.10 255.255.255.255 [1/0] via 69.77.43.1, outdoors
Other things to mention:
-There is no other FW between LAN and the ASA
-There is no FW or NAT configured or enabled on this ASA(see her running nat and see the race group-access they return all two virgins).
-FW Windows on the Anyconnect workstation is disabled (the service is running). I also tested and able to ping to my workstation Anyconnect House of another device on the same network.
So, I'm left with two questions:
1. first a I do not understand: after reading some threads here, I added this line standard lanwan-acl access-list allowed 69.77.43.0 255.255.255.0
out of ping and tracert commands remains the same, but now I can RDP to the docking station VPN connected to any workstation LAN;
What happens here?
2. how can I do ICMP work after all? I also tried fixup protocol icmp and icmp Protocol Error Correction, still no luck
Thanks in advance,
Florin.
Hi Florin,
The entire production is clear enough for me
in debugging, you can see that traffic is constituent of the ASA
"Inside ICMP echo request: 172.17.35.71 outside: 172.25.9.9 ID = 22 seq = 14024 len = 32.
the SAA can be transferred on or can be a downfall for some reason unknow
can we have a wireshark capture on the vpn client to see if the icmp request is to reach the customer? I want to just isolate the problem of fw so that we can concentrate on the ASA rather than silly windows ;) fw
made the RDP Protocol for VPN client for you inside the LAN work?
run logging on ASA and ping and then inside to VPN client and the Coachman connects on the firewall, if ASA comes down the pkt it will appear in the log.
loggon en
debug logging in buffered memory#sh logging buffere | in icmp
#Rohan
-
The AnyConnect client software download
Hello world
I wonder to download all software connect to ASA 5520.
Soon we are upgrading to anyconnect vpn client.
We have users of windows 7 PC that will use the anyconnect VPN.
Download cisco Web site I download these software for windows
AnyConnect-EnableFIPS-win - 3.1.05152 - exe file.
you will need to confirm if this is good software anyconnect?
Web site has also
AnyConnect-EnableFIPS-win - 3.1.05152.mst
What is the difference between these 2?
everything will work with windows 7 pc?
Concerning
MAhesh
Mahesh,
You must download the package file anyconnect-victory - 3.1.05152 - k9.pkg for the deployment of the SAA on the cisco site. It works perfectly with windows 7 PC.
-
ASA problem inside the VPN client routing
Hello
I have a problem where I can't reach the VPN clients with their vpn IP pool from the inside or the asa itself. Connect VPN clients can access internal network very well. I have no nat configured for the pool of vpn and packet trace crypt packages and puts it into the tunnel. I'm not sure what's wrong.
Here are a few relevant config:
network object obj - 192.168.245.0
192.168.245.0 subnet 255.255.255.0
192.168.245.1 - 192.168.245.50 vpn IP local pool
NAT (inside, outside) static source any any destination static obj - 192.168.245.0 obj - 192.168.245.0 no-proxy-arp-search to itinerary
Out of Packet trace:
Firewall # entry packet - trace inside the x.x.x.x icmp 8 0 192.168.245.33
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit rule
Additional information:
MAC access list
Phase: 2
Type:-ROUTE SEARCH
Subtype: entry
Result: ALLOW
Config:
Additional information:
in 192.168.245.33 255.255.255.255 outside
Phase: 3
Type: ACCESS-LIST
Subtype: Journal
Result: ALLOW
Config:
Access-group acl-Interior interface inside
access list acl-Interior extended icmp permitted an echo
Additional information:
Phase: 4
Type: IP-OPTIONS
Subtype:
Result: ALLOW
Config:
Additional information:
Phase: 5
Type: INSPECT
Subtype: np - inspect
Result: ALLOW
Config:
Additional information:
Phase: 6
Type:
Subtype:
Result: ALLOW
Config:
Additional information:
Phase: 7
Type: NAT
Subtype:
Result: ALLOW
Config:
NAT (inside, outside) static source any any destination static obj - 192.168.245.0
obj - 192.168.245.0 no-proxy-arp-search to itinerary
Additional information:
Definition of static 0/x.x.x.x-x.x.x.x/0
Phase: 8
Type: VPN
Subtype: encrypt
Result: ALLOW
Config:
Additional information:
Phase: 9
Type: CREATING STREAMS
Subtype:
Result: ALLOW
Config:
Additional information:
New workflow created with the 277723432 id, package sent to the next module
Result:
input interface: inside
entry status: to the top
entry-line-status: to the top
output interface: outside
the status of the output: to the top
output-line-status: to the top
Action: allow
There is no route to the address pool of vpn. Maybe that's the problem? I don't know than that used to work before we went to 8.4.
Check if the firewall is enabled on your host from the client ravpn and blocking your pings.
-
We need to determine the distribution of different Anyconnect sslvpn, connecting clients to our ASA hub. Is there a method, either in the ASDM or CLI (or syslog) to determine the type of customer and the meter (for example the Android and iOS vs Windows vs Linux)?
There are 'user agent' field in vpn-sessiondb. You can check via ASDM or
show vpn-sessiondb det anyconnect
If my memory is good. (Exact symptom depends on version)
http://www.Cisco.com/c/en/us/TD/docs/security/ASA/ASA-command-reference/...
-
How to remove entries or register a new in the drop-down list of the Anyconnect client?
I have a user who uses Anyconnect for quite awhile now, and we have activated the ASA profiles a few times over the past year.
My client seems very well, but maybe also because I have a new laptop without the previous hidden settings.
The problem: old entries in the 'box' connection to still appear and if I type a new entry it will connect but not save it as a connection profile.
If I start from scratch by uninstalling the client, ranging on the external right site (vpn.mydomain.com), it will automatically install the customer very well yet. But the client install still just shows the old entries and not the correct (what should the list as vpn.mydomain.com).
I deleted the entries in personal profile under c:\users\username\appdata\local\Cisco and that to remove an entry, but the other is still there and I can't find where on the system, it is stored.
However, the great thing is that it does not save the correct entry of vpn.mydomain.com in the list of connections, so the user must either enter it and click on connect manually or if they have to go to the website https://vpn.mydomain.com and connect via the site itself.
Any ideas on how to get this fixed so that his client only shows the correct host in the customer?
On Windows, see C:\ProgramData\Cisco\Cisco AnyConnect guarantee mobility Client\Profile. profile entries must complete this directory.
New connections should add profiles or you can construct one manually using the following simple model, replacing it with your values where I typed xxxx:
http://schemas.xmlsoap.org/encoding/">."
xxx
xxx.xxx.xxx.xxx
SSL
There are many more entries in option, but it's a bone at naked one.
-
Find the Windows Version of the AnyConnect Client
I want to find how many customers connect with AnyConnect SSL VPN from a XP computer.
ASA reports the Type of Client like Windows operating system. Is it possible to get more detailed information?
I don't think you can with AnyConnect Essentials.
You must have AnyConnect Premium more license Advanced Endpoint Assessment to check the version of the client operating system. If you don't already have that, however, it would be a terrible expensive buy just for that purpose.
It is also available if you use ISE (license Apex) as your AAA server and have a policy of posturing to evaluate the customer.
-
How can I set up an automatic connection with the captive portals on iOS?
My public library has a system called Wi - Fi Spot, which requires that employers use their library card number and pin code to connect. They enter this information the first time they connect, and expect that the BONE will retain this information for the next time, they connect. This isn't. I understand that this WiFi configuration uses what is called a captive portal as a front end of connection. My question is, how do I configure the operating system to maintain login information?
You have activated and completed Autofill? Settings > safari > AutoFill >
How about you try settings > safari > passwords and by adding an entry for the portal. Assuming of course he has a static URL.
If you read this manual for iOS Apple's Safari, it seems that Safari will respond to an offer/suggestion by a Web site, but does not have to remember a username or password otherwise. I guess the "when prompted" is a reaction of Safari to a website, not the other way around.
I also would not assume that their portal invites you to register a user name. As I understand it in web programming, it is not a given.
FWIW, my library has a similar sign in the program installation, but with their check boxes to remember my user name and PIN code. He worked for 4 weeks and then resets. When asked, they say it's a safety thing.
-
AnyConnect customers not to follow the internal static routes on ASA5505
I just bought an ASA 5505 for my remote access to our internal network users. I followed all the installation instructions, that I can find. I am able to establish a VPN connection by using the Anyconnect client and can see some of my internal network. (In fact, only the subnet of the interface internal) However, I have several subnets inside of my LAN which are then sent by another switch inside my LAN. I have built in the correct static routes so that the ASA will send traffic to this internal routing for all subnets switch doesn't do not part of it is inside the subnet of the interface. I can see and ping these subnets of the SAA itself but the AnyConnect client cannot. Any suggestions on how to solve this problem would be greatly appreciated.
Hello
Please, add these lines and give it a try:
inside_nat0_outbound list of permitted access 192.168.0.0 255.255.0.0 192.168.1.0 255.255.255.0
access-list allowed inside_nat0_outbound 203.250.0.0 255.255.0.0 192.168.1.0 255.255.255.0
inside_nat0_outbound to access extended list ip 172.100.0.0 255.255.0.0 allow 192.168.1.0 255.255.255.0
inside_nat0_outbound to access extended list ip 210.105.0.0 255.255.0.0 allow 192.168.1.0 255.255.255.0
Kind regards
Note the useful messages!
Julio
-
Disable the download Anyconnect client / turn off the url connection
Hello
Is there a way to disable the Anyconnect client download when you navigate to the anyconnect url? Or just make the connection of the url is not accessible
While users can still connect with their client anyconnect installed in the corporate network.Thank you!
Dave.
You can't disable the download directly. This had been discussed several times here at least one CSC who also confirmed a case of TAC. Link.
A hack is that if your image Anyconnect is an older, users will never invited to be updated.
Re URL, you can turn off the alias that fill the drop-down list on the web portal, but also long as your have the SSL VPN service active, external interface of the ASA will be used toward the top of the login page to less than the default connection profile.
What is your reason for wanting to turn off in the first place? Perhaps there is another method to achieve what you want.
-
The anyconnect vpn easy vpn Remote communication problem
Hi team,
I have a problem of communication of the anyconnect vpn easy vpn Remote I´ll explain better below and see the attachment
topology:(1) VPN Tunnel between branch HQ - That´s OK
(2) VPN Tunnel between Client AnyConnect to HQ - that s OKThe idea is that the Anyconnect Client is reaching the local Branch Office network, but has not reached.
Communication is established just when I begin a session (icmp or rdp) branch to the AnyConnect Client,.
in this way, the communication is OK, but just for a few minutes.Could you help me?
Below the IOS version and configurationsASA5505 Version 8.4 (7) 23 (Headquarters)
ASA5505 Version 7.0000 23 (branch)Configuration of the server easy VPN (HQ) *.
Crypto dynamic-map DYNAMIC - map 5 set transform-set ESP-AES-256-SHA ikev1
Crypto card outside-link-2_map 1 ipsec-isakmp DYNAMIC-map Dynamics
Crypto map link-outside-2_map-65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
Crypto map interface outside-link-2_map outside-link-2ACL_EZVPN list standard access allowed 10.0.0.0 255.255.255.0
ACL_EZVPN list standard access allowed 192.168.1.0 255.255.255.0
ACL_EZVPN list standard access allowed 192.168.50.0 255.255.255.0
ACL_EZVPN list standard access allowed 10.10.0.0 255.255.255.0internal EZVPN_GP group policy
EZVPN_GP group policy attributes
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list ACL_EZVPN
allow to NEM
type tunnel-group EZVPN_TG remote access
attributes global-tunnel-group EZVPN_TG
Group Policy - by default-EZVPN_GP
IPSec-attributes tunnel-group EZVPN_TG
IKEv1 pre-shared-key *.object-group network Obj_VPN_anyconnect-local
object-network 192.168.1.0 255.255.255.0
object-network 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
object-network 192.168.50.0 255.255.255.0
the NAT_EZVPN_Source object-group network
object-network 192.168.1.0 255.255.255.0
object-network 10.10.0.0 255.255.255.0
the NAT_EZVPN_Destination object-group network
object-network 10.0.0.0 255.255.255.0
destination of Obj_VPN_anyconnect local Obj_VPN_anyconnect-local static NAT (inside, outside-link-2) Obj - VPN static source -.Remote AnyConnect VPN - Obj anyconnect-remote non-proxy-arp-search to itinerary
destination NAT (inside, outside-link-2) static source NAT_EZVPN_Source NAT_EZVPN_Source NAT_EZVPN_Destination staticNAT_EZVPN_Destination no-proxy-arp-search to itinerary
NAT (outside-link-2, outside-link-2) static source Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote static destinationNAT_EZVPN_Destination NAT_EZVPN_Destination non-proxy-arp-search route
Configuration VPN AnyConnect (HQ) *.
WebVPN
Select the outside link 2
by default-idle-timeout 60
AnyConnect essentials
AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
AnyConnect profiles Remote_Connection_for_TS_Users disk0: / remote_connection_for_ts_users.xml
AnyConnect enable
tunnel-group-list activatetunnel of splitting allowed access list standard 192.168.1.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.15.0 255.255.255.0
tunnel of splitting allowed access list standard 10.0.0.0 255.255.255.0internal clientgroup group policy
attributes of the strategy of group clientgroup
WINS server no
value of server DNS 192.168.1.41
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
ipconnection.com.br value by default-field
WebVPN
AnyConnect Dungeon-Installer installed
time to generate a new key 30 AnyConnect ssl
AnyConnect ssl generate a new method ssl key
AnyConnect value Remote_Connection_for_TS_Users type user profiles
AnyConnect ask flawless anyconnecttype tunnel-group sslgroup remote access
tunnel-group sslgroup General-attributes
address vpnpool pool
authentication-server-group DC03
Group Policy - by default-clientgroup
tunnel-group sslgroup webvpn-attributes
enable IPConnection-vpn-anyconnect group-aliasobject-group network Obj_VPN_anyconnect-local
object-network 192.168.1.0 255.255.255.0
object-network 192.168.15.0 255.255.255.0
object-group network Obj-VPN-anyconnect-remote
object-network 192.168.50.0 255.255.255.0
the NAT_EZVPN_Source object-group network
object-network 192.168.1.0 255.255.255.0
object-network 10.10.0.0 255.255.255.0
the NAT_EZVPN_Destination object-group network
object-network 10.0.0.0 255.255.255.0
destination of Obj_VPN_anyconnect local Obj_VPN_anyconnect-local static NAT (inside, outside-link-2) Obj - VPN static source -.Remote AnyConnect VPN - Obj anyconnect-remote non-proxy-arp-search to itinerary
destination NAT (inside, outside-link-2) static source NAT_EZVPN_Source NAT_EZVPN_Source NAT_EZVPN_Destination staticNAT_EZVPN_Destination no-proxy-arp-search to itinerary
NAT (outside-link-2, outside-link-2) static source Obj-VPN-anyconnect-remote Obj-VPN-anyconnect-remote static destinationNAT_EZVPN_Destination NAT_EZVPN_Destination non-proxy-arp-search route
Hello
communication works when you send the traffic of easyvpn derivation because it froms the IPSEC SA to pool local subnet and anyconnect HQ. The SA formed only when the branch initiates the connection as it's dynamic peer connection to HQ ASA.
When there no SA between branch and HQ for this traffic, HQ ASA has no idea on where to send the anyconnect to network traffic.
I hope this explains the cause.
Kind regards
Averroès.
Maybe you are looking for
-
"Multi Tab Handler" recorded not several tabs
Extension Manager multi-onglet in FF17 recorded not several tabs. It is possible to select them, even to click on 'Save selected as files tabs' but then... nothing happens.
-
CD/DVD drive of C50 - A satellite not recognized in Windows 10
The cd/dvd drive does not work after the upgrade to windows 8.1 for windows 10. The driver is "TSSTcorp CDDVDW SU-208FB" and State in Device Manager is Windows cannot start this hardware device because its information of configuration (in the registr
-
Qosmio G10: Scanner uninstall problems - cannot load the external DLL
I tried to uninstall an old scanner HP my Qosmio G10 and received the message - internal error unable to load or call external DLL, please contact you provider for more information. If I could use the product to restore disc and all saved this would
-
The D drive, which is a partition on my main hard drive disappeared.
My D drive, which is a partition on my main hard drive disappeared. He has a lot of data. I use Windows xp. How to restore the partition as drive D and recover files that have been on it?
-
Need help URGENT: password Money 2007 Deluxe
Last week 2007 money would not take my PERMANENT LONG password @ into the page. Clicked on link "password forgotten?" - took me to Windows Live & had me change password. Return to money - does not recognize. Found on another forum with excellent in