automatic DHCP client, stop and restart

Please help me

in my network:

DNS: 192.168.0.4

DHCP:192.168.0.3

each client problems: ""stop and restart automatic dhcp client.

computer restart all of a sudden and when windows clent dhcp service stop

Thank you

Hi Shayan,

For additional verification on that, we will ask for information. Your computer is connected to a domain network or home network? Please try the steps on this link: DHCP restarts.

Brand of kindly as answer if this post responds to your request. Feel free to get back to us if you need further assistance.

Kind regards

Gilles Ova

Tags: Windows

Similar Questions

  • HP Envy Phoenix, stop and restart suddenly

    I've had this computer for a week and every time that I turn on and sign in about ten minutes later just stops and restarts without any explanation.  I tried to disable automatic reboot in the Advanced section in the properties of the system, but it didn't fix it, and I can't find any other explanations of what is happening.  Any help would be greatly appreciated.

    Thank you

    Hello

    Just bought thisPC?

    Nice system. I have a 810-150se. similar to yours.

    I have zero tolerance for new products that fail shortly after purchase.

    Return it as soon as possible!

    Jaco

  • window will stop in less than a minute, stops and restarts everytime I use the computer

    message-windows will be stop in less than a minute. appears, and then the computer stops and restarts. It's windows vista and it's this evertime I use the computer

    Hello

    ·        This happens randomly, or when you open any application on the system?

    ·        Since when are you facing this problem?

    ·        Remember to make changes to the system?

    Check the event viewer for the newspapers and let us know. Follow the steps mentioned in the link below.

    Open event viewer

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Method 1:

    Step 1:

    I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.

    a. restart the computer and keep tapping F8 until you reach the start menu.

    b. Select safe mode and press ENTER.

    Step 2:

    I suggest you do a clean boot and see if the problem still occurs.

    To perform a clean boot follow the steps mentioned in the link given below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Follow step 7 to start the computer in normal startup.

    Method 2:

    It may be there is a scheduled task on your system. Check in Task Scheduler and if there is no scheduled tasks then, remove and check if the problem persists.

    Automate tasks with Task Scheduler

    http://Windows.Microsoft.com/en-us/Windows-Vista/automate-tasks-with-Task-Scheduler-from-Windows-Vista-inside-out

    Schedule a task

    http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-a-task

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Explorer stops and restarts.

    Windows Explorer stops and restarts when I right-click on a file or a folder, or when I try to delete a file or folder. A window will appear: "Windows Explorer has stopped working. Windows is checking for a solution to the problem... ». Then another window will appear: "Windows Explorer restarts. This does not happen with all files and folders, but many. I can use a third-party program (sheets) to delete files and folders, but not to explore. I have recently installed Windows Live Mail, Photo Gallery and I replaced Norton Security with McAfee, but I don't know if the problem started after or before those. Says Windows solutions I check for updates but I have automatic updates turned on and I have all the updates.

    Hello

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    Did you use the McAfee removal tool to ensure that it has been uninstalled completely? If this isn't the case, it uses now.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

    Norton is also known to cause strange problems with explore and Internet Explorer.

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • What is the difference between the stop and restart?

    What is the difference between the stop and restart?  I feel that stopping closed all processes, completely erases RAM memory and clears the cache of the processor.  I need to know if 1) this is a correct assumption and 2) which is better for daily maintenance of the system.  Thank you in advance.

    Hello Jeremy_1976,

    Your support when the judgment is correct. Basically, it stops the process and completely turns off your computer. Reboot, however, temporarily your PC stops, then turn it on again. This happens usually when Windows updates are installed. After installation, the system is restarted (rebooted) so that any update has been successfully installed and works as it should. You can be a little mixed upward the reboot and the hibernation. Reboot is, as I have indicated previously, basically a reboot of your machine. Ultimately, your PC is on again after a reboot. However, hibernation, stores all data currently in memory in a special file, then the PC turns off. When you then turn on your PC, that is, coming out of hibernation, hibernation files is used to restore the status of the PC than when you initially put into hibernation. In other words all the programs you had open before will automatically open and be ready to use hibernation.

    Hibernation or sleep for that matter is for short-term use. It is normal in Hibernate, or sleep if you want to be away from your PC for half an hour or so. If you leave more than I suggest you stop completely.

    A point to remember about hibernation is that, if you use put into hibernation, you can't, once you get out after hibernation, install programs or updates. You have to stop and restart normally to do.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • system stops and restarts as soon as I click on adobe icon pro first

    My system stops and restarts as soon as I click the icon of Adobe Premiere pro. I also spent off some of the Visual effects in the Performance information and tools in Control Panel. Although I already understood how to stop my system to reboot automatically, but still my system freezes when I click on the icon.

    Care of my system are-

    Intel core i7 4770

    8 GB ram

    Windows7 ultimate 64-bit

    ZOTAC Nvidia Geforce Gtx 650

    Well, thank you very much for your help, but he has already begun to work idk how...

  • After 5-10 minutes my Satellite L650 makes a stop and restarts

    I have a strange problem with my new laptop Satellite L650.
    Initial bootstrap is ok, and I can start to work. Then, suddenly, after 5-10 minutes the laptop makes a stop and restarts!
    The second start is fine and I can work normally for hours.
    Everyone has the same problem?
    What should I do?
    I have the most current BIOS installed, sw suggested by the Board of Directors of Toshiba report but nothing has changed.
    Michele

    Hello Michele

    An error message appears before shutdown of the laptop?
    Is a certain application in use when this happens?

    Since when you noticed this behavior?

  • Frequently, my computer stops and restarts all am surfing the net? What should I do?

    Frequently, my computer stops and restarts all am surfing the net.  What can I do?

    Hello

    1. what type of internet connection do you use? What is a wired or wireless?

    2. you receive messages or error codes?

    2. did you of recent changes on the system?

    Step 1:

    You can check the following items and check if the problem occurs in safe mode with network.

    Start your computer in safe mode

    Startup options (including safe mode)

    Step 2:

    If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  • Recently installed Windows 7 now cannot open any games Big Fish when I try to open the game get error message computer stops and restarts

    Cannot open the computer game stops and restarts

    Check that the Big Fish Games support the site http://bigfishgames.custhelp.com/app/home to see if it's a known issue.  I hope they don't send you here :-)

  • What is a DHCP client address and what is an ISP?

    Try to connect Tivo w / a wireless connector for my computer instead of using the phone line. TiVo's request for a DHCP client address and Pack International customer

    Hello

    The DHCP Dynamic Host Configuration Protocol () is a protocol for network configuration for hosts on networks IP (Internet Protocol). Computers that are connected to IP networks must be configured before it can communicate with other hosts. The essential information needed are an IP address and a default route and the routing prefix. DHCP eliminates the manual task by a network administrator. It offers a central database of devices that are connected to the network and eliminates duplicate resource assignments.
    An ISP (ISP) is an organization that provides access to the Internet.

    See the following link:
    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233

    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

  • Hi, I have a toshiba tecra 5000 I downloaded updates when they try the third phase of the update download the computer stops and restarts.

    I'm a newbie with this stuff so bear with me.  I updated charges, when they get to the third stage of the download the computer stops and restarts. I tried all types of restart, the system is unable to connect. now the hard drive light on the face of the computer won't lite, the laptop won't even consider itself restart any ideas

    Hello

    1. the updates you downloaded?
    2 a successful installation of updates?
     
    Follow these methods and check
     
    Method 1:  If you are still not able to start the desktop computer, you can rename pending.xml and check.
    Renaming or removing the pending.xml file booting from the Windows Vista disc.
    a. Insert the installation disc.
    b. restart your computer.
    c.Press any key to load the disc.
    Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.
    d. choose your language settings, and then click Next.
    e. in the System Recovery Options menu, click command prompt
    f. at a command prompt, type the following command below and press ENTER
    CD C:\windows\winsxs
    g. now, type ren pending.xml pending.old , and then press ENTER.
    Restart the computer and check.
     
     
    Method 2:  Once you are able to boot to the desktop, follow this method.
    An update is not installed successfully when you try to install the update in Windows Vista and Windows 7:
    http://support.Microsoft.com/kb/949358
     
     
     
    Thank you
  • Why Windows Live Mail and Windows live Album Viewer on several occasions to stop and restart?

    Windows Live and Windows live Album Viewer

    Please can someone can explain and or offer the solution >

    > Why don't Windows Live Mail and Windows live Album Viewer repeatedly to stop and restart?

    Thank you

    UrbanFox.

    Please can someone can explain and or offer the solution >

    > Why don't Windows Live Mail and Windows live Album Viewer repeatedly to stop and restart?

    Thank you

    UrbanFox.

    Windows Live mail etc belongs to Windows Live Solution Center, not MS Answers forums forums.

    Please repost to the Mail section Mail Threads forum

    http://windowslivehelp.com/forums.aspx?ProductID=15

  • When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.

    Restart mail Windowas

    When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.

    Try to compact and repair the database (see www.oehelp.com/WMUtil/).  There is likely an inconsistency between what is really there and what think the database is where and who must reconcile the two.  So beware of interference from antivirus software which can cause these issues (see www.oehelp.com/OETips.aspx#3).

    Steve

  • Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

    Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

    The link below has options to solve your problem of loop.

    http://support.Microsoft.com/kb/949358>

    04:17:0407/17/11

  • Get the message when running Norton - OS file system error (C :), advised stopping and restarting,)

    Original title: what is system problem Partition OS operating system error (C :) file)

    get the message when Norton - OS file system error (C :), recommended stop and restart running, did not help)

    Hi catherinegood,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem? Hope this information is useful.

    This is error occurs when Norton scan, then you can check with Norton and check:

    Check the link for the support of Norton:

    http://securityresponse.Symantec.com/Norton/support/contact/contact.jsp

    http://www.Symantec.com/support/index.jsp

    If you try to run a scan, you can check out the following link and try to download the Microsoft Safety Scanner and analysis complete on your computer and check.

    Note: When you perform the analysis, there are risks of data loss you can take a backup of important data before performing analysis.

    Check out the link:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Hope this information is useful.

Maybe you are looking for