Automatic disconnection after inactiviy?

Similar Questions

• the codec sx20 call automatically disconnects automatically after 3 to 5 minut

  Dial sx20 to mcu (5300), is automatically disconnect after 3 to 5 minutes.

  Please find join snaps for her.

  This error message looks like in there is something wrong with your SX20.

  You could try it paginate in a previous software image (if there is a loading) by going to the maintenance > System Recovery > software Recovery Swap and clicking on the switch to software: button.

  If there is no image software to swap in, you can try to upgrade the software on your endpoint to install a new software image.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• page automatic session timeout disconnection after inactivity of the user

  Hello gurus dreamweaver!

  Please how do I automatically my Member site Web page connection timeout after a period specifies the inactivity of the user.

  I discovered that is a member in my restricted page login and not forget to close your session, the page is will not disconnect automatically.

  How can I make my Web page, or automatically disconnect after a period specifies the inactivity of the user.

  See my below Member login page:

  <? php require_once('Connections/democon.php');? >

  <? PHP

  initialize the session

  If (! isset {})

  session_start();

  }

  * Log out the current user. **

  $logoutAction = $_SERVER ['PHP_SELF']. » ? doLogout = true;

  If ((isset & & ($_SERVER ['QUERY_STRING']! = "")) {})

  $logoutAction. = '& '. htmlentities($_SERVER['QUERY_STRING']);

  }

  {If ((isset($_GET['doLogout'])) & & ($ {_GET ['doLogout'] == "true"))}

  to completely disconnect a visitor, you must delete the session varialbles

  $_SESSION ['MM_Username'] = NULL;

  $_SESSION ['MM_UserGroup'] = NULL;

  $_SESSION ['PrevUrl'] = NULL;

  unset($_SESSION['MM_Username']);

  unset($_SESSION['MM_UserGroup']);

  unset($_SESSION['PrevUrl']);

  $logoutGoTo = 'login.php ';

  If {($logoutGoTo)

  Header ("Location: $logoutGoTo");

  "exit";

  }

  }

  ? >

  <? PHP

  If (! isset {})

  session_start();

  }

  $MM_authorizedUsers = "";

  $MM_donotCheckaccess = "true";

  Restrict access to Page: grant or deny access to this page

  Function isAuthorized ($strUsers, $UserGroup, $strGroups, $UserName) {}

  For safety, first assuming that the visitor is NOT allowed.

  $isValid = false;

  When a visitor is connected to this site, the MM_Username of Session variable value equal to their username.

  So, we know that a user is NOT logged if this Session variable is empty.

  If (! empty ($UserName)) {}

  In addition to being connected, you can restrict access to only certain users based on a created ID when they connect.

  Analyze the channels in the tables.

  $arrUsers = explode (",", $strUsers);

  $arrGroups = explode (",", $strGroups);

  If (in_array ($UserName, $arrUsers)) {}

  $isValid = true;

  }

  Or, you can restrict access to only certain users based on their user name.

  If (in_array ($UserGroup, $arrGroups)) {}

  $isValid = true;

  }

  If (($strUsers == "") & & true) {}

  $isValid = true;

  }

  }

  return $isValid;

  }

  $MM_restrictGoTo = 'login.php ';

  If (!) {(((isset($_SESSION['MM_Username']))) & & (isAuthorized ("", $MM_authorizedUsers, $_SESSION ['MM_Username'], {$_SESSION ['MM_UserGroup']})))}

  $MM_qsChar = ';?

  $MM_referrer = $_SERVER ['PHP_SELF'];

  If (strpos ($MM_restrictGoTo, "?")) $MM_qsChar = "&";

  If (isset($_SERVER['QUERY_STRING']) & & strlen($_SERVER['QUERY_STRING']) > 0)

  $MM_referrer. = « ? ». $_SERVER ['QUERY_STRING'];

  $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar. "accesscheck =". UrlEncode ($MM_referrer);

  Header ("Location:".) $MM_restrictGoTo);

  "exit";

  }

  ? >

  <? PHP

  If (! function_exists ("GetSQLValueString")) {}

  function GetSQLValueString ($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")

  {

  If (via PHP_VERSION < 6) {}

  $theValue = get_magic_quotes_gpc()? stripslashes ($TheValue): $theValue;

  }

  $theValue = function_exists ("mysql_real_escape_string")? mysql_real_escape_string ($TheValue): mysql_escape_string ($theValue);

  Switch ($theType) {}

  case 'text ':

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "long":

  case "int":

  $theValue = ($theValue! = "")? intval ($TheValue): 'NULL ';

  break;

  case "double":

  $theValue = ($theValue! = "")? doubleVal ($TheValue): 'NULL ';

  break;

  case "date":

  $theValue = ($theValue! = "")? « " ». $theValue. "" "": "NULL";

  break;

  case "set":

  $theValue = ($theValue! = "")? $theDefinedValue: $theNotDefinedValue;

  break;

  }

  Return $theValue;

  }

  }

  $colname_Recordset1 = "-1";

  If (isset($_SESSION['MM_Username'])) {}

  $colname_Recordset1 = $_SESSION ['MM_Username"];

  }

  @mysql_select_db ($database_democon, $democon);

  $query_Recordset1 = sprintf ("" SELECT * FROM Portal WHERE idno = %s ", GetSQLValueString ($colname_Recordset1,"text")");

  $Recordset1 = mysql_query ($query_Recordset1, $democon) or die (mysql_error ());

  $row_Recordset1 = mysql_fetch_assoc ($Recordset1);

  $totalRows_Recordset1 = mysql_num_rows ($Recordset1);

  ? >

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"

  < title > Untitled Document < /title >

  < / head >

  < body >

  < style p = "do-size: 18px" > < / p >

  < style p = "font size: 18px" > welcome < span style = "color: #F00" > <? PHP echo $row_Recordset1 ['firstname'];? > < / span > < span style = "color: #F00" > <? PHP echo $row_Recordset1 ['name'];? >! </span > you now connect in the Member area. < /p >

  < p > < / p >

  < table width = "356" height = "127" border = "0" align = "center" cellpadding = "6" >

  < b >

  < th colspan = "2" bgcolor = "#FFFFCC" scope = "row" > YOUR PROFILE < /th >

  < /tr >

  < b >

  < th width = "134" align = "left" bgcolor = '#FFFFCC' scope = "row" > NO ID < /th >

  < td width = "342" bgcolor = "#FFFFCC" > <? PHP echo $row_Recordset1 ["idno"];? > < table >

  < /tr >

  < b >

  < th align = "left" bgcolor = '#FFFFCC' scope = "row" > NAME < /th >

  < td bgcolor = "#FFFFCC" > <? PHP echo $row_Recordset1 ['name'];? > < table >

  < /tr >

  < b >

  < th align = "left" bgcolor = '#FFFFCC' scope = "row" > NAME < /th >

  < td bgcolor = "#FFFFCC" > <? PHP echo $row_Recordset1 ["FirstName"];? > < table >

  < /tr >

  < b >

  < th align = "left" bgcolor = '#FFFFCC' scope = "row" > EMAIL < /th >

  < td bgcolor = "#FFFFCC" > <? PHP echo $row_Recordset1 ['email'];? > < table >

  < /tr >

  < /table >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < p > < a href = "<?" PHP echo $logoutAction? > "> sign OUT < /a > < /p >"

  < p > < / p >

  < p > < / p >

  < p > < / p >

  < / body >

  < / html >

  <? PHP

  mysql_free_result ($Recordset1);

  ? >

  .osgood_ ~.

  If the time-out period is applied to the side server, download links and others 'actions' all absolutely need to (and should) be run through validation. If there is a video completely downloaded on the screen there is only technology really client-side (JavaScript) which can detect if any action ' customer' is valid and within the time-out. I can think of scenarios 1 million and 1 million responses for each of them but finally if the user performs an action, or directly by refreshing PHP via AJAX, he should be hitting a side script server, and this time-out will decide last spring if the action is allowed or not. There all be wired through it.

  That said, although I said it is not 100% reliable and can be falsified, I would absolutely use a JavaScript (preference) or a refresh meta technique to bounce off the side of the customer as well as the logic in the back-end. The back-end is the absolute goal keeper and as you say, it would be little course if this isn't the case. The client side only decorate but is very important for a good user experience.

  piece gear ~

  Just $0.02, but you shouldn't go off with the stand-alone example code that I gave. In this scenario, I was 'definition' which, in your case, is of $_SESSION ['MM_Username"]. It had not been previously assigned. If Dreamweaver is the filling with a string and try try to reassign to one object (as I am) you will get errors. My code has been created as a completely isolated example, do not follow quite literally here as a paste - in the solution. I just need to know your level of comfort with PHP.

  I have not scanned all of this code for the PHP quality nor do I confess that I am familiar with the automation than Dreamweaver, but I'm very familiar with PHP, so it's the portion of code only from your original post with my timestamp amendment added to this. As mentioned, duplicate the file if you have your old code intact (still, or better, use git or SVN and version it). Then try to remove the part of the code of this page in replace with this:

   0)
    $MM_referrer .= "?" . $_SERVER['QUERY_STRING'];
    $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
    header("Location: ". $MM_restrictGoTo);
    exit;
  }
  
  if (!function_exists("GetSQLValueString")) {
    function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
    {
    if (PHP_VERSION < 6) {
      $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
    }
  
    $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
  
    switch ($theType) {
      case "text":
        $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
        break;
      case "long":
      case "int":
        $theValue = ($theValue != "") ? intval($theValue) : "NULL";
        break;
      case "double":
        $theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
        break;
      case "date":
        $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
        break;
      case "defined":
        $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
        break;
    }
    return $theValue;
    }
  }
  
  //-----------------------------------------------------------------------------
  
  // define your idle max, in seconds
  define('IDLE_MAX', 5);
  
  // if we already have $_SESSION['MM_Username'], let's check a timestamp
  if (isset($_SESSION['MM_Username']))
  {
    // if we get here, we're logged in.. check or add a timestamp
    if (isset($_SESSION['timestamp']))
    {
      // we have a timestamp, let's see if it exceeds our idle threshold
      if ((time() - $_SESSION['timestamp']) > IDLE_MAX)
      {
        // we have EXCEEDED our idle, we are therefore going to log out.
        // Using the assigned variable from above:
        header($logoutAction);
        exit;
      }//if idle exceed
      else
      {
        // idle is not exceeded, allow the user to continue but UPDATE timestamp
        $_SESSION['timestamp'] = time();
      }
  
    }// if timestamp
    else
    {
       // we have a username but no timestamp, must be initial login
       $_SESSION['timestamp'] = time();
    }
  
  }//if MM_Username
  
  //-------------------------------------------------------------------------
  
  $colname_Recordset1 = "-1";
  if (isset($_SESSION['MM_Username'])) {
    $colname_Recordset1 = $_SESSION['MM_Username'];
  }
  mysql_select_db($database_democon, $democon);
  $query_Recordset1 = sprintf("SELECT * FROM portal WHERE idno = %s", GetSQLValueString($colname_Recordset1, "text"));
  $Recordset1 = mysql_query($query_Recordset1, $democon) or die(mysql_error());
  $row_Recordset1 = mysql_fetch_assoc($Recordset1);
  $totalRows_Recordset1 = mysql_num_rows($Recordset1);
  ?>
  

  Again, I've changed any of the logic of outside Dreamweaver removing closing/reopining tags PHP (not sure if the snippits need those, add as needed). I also removed the condition to start the session because it is completely unnecessary. It's literally everything, except the code see you near the end, surrounded by long comment lines-...

  Page has 2 points of basic input that I see, but no matter how many there. The logic is simple enough. If at the time wherever you arrive at my code, you have Dreamweaver validate a user, $_SESSION ['MM_Username'] will be defined. If that's true then I check a timestamp. Is there then the user was literally just connected, so I add a timestamp. Whenever the page is refreshed from there, re - run all the code, the timestamp is checked to make sure that it is below your IDLE_MAX (in seconds). I put it to 5 again to be clear. If the time is greater than 5 seconds since the logon, I use the above global defined $logoutAction and redirect you to the sign-out process which should land in login.php on the next redirection, as long as a user logged on.

  I always try to use the code that already exists and do nothing useless, but I must assume from this code that no information is sent to the browser for display in this code. A redirect to the header() function will not work if this is not the case. I don't "see" anything here which is explicitly doing just that so I guess it will work fine. Please give him a simple test and season to taste.

  No matter what the user is trying to do, if the idle time is exceeded the sign-out process is up on them at all times. No matter if they refresh, back, etc.

• To automatically disconnect client computers

  I have a Server 2008 Foundation with 7 client computers running windows 7.  I want that they automatically disconnect after idle time xx.  is there a way to do this in group policy or do I need third party software? I've seen some users stay connected for a few hours, while others are disconnected after 20 minutes or more.

  I have a Server 2008 Foundation with 7 client computers running windows 7.  I want that they automatically disconnect after idle time xx.  is there a way to do this in group policy or do I need third party software? I've seen some users stay connected for a few hours, while others are disconnected after 20 minutes or more.

  You do that via power Plan which includes when closing the display or even go to mode standby when the computer is idle for number od x minutes or hours.
  Here's the tutorial for Windows 7:
  http://www.SevenForums.com/tutorials/775-custom-power-plan-create-delete.html

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• USB 3 G modem disconnects after 10-15 minutes.

  The problem is whenever I try to use my 3g phone to connect to internet, it automatically disconnects after a few moments. I searched the windows knowledge base articles and found there is a problem with the modem usb windows driver and they gave an update, but stated that the driver update is beta version.and, so it happens that I installed the update and always internet keeps disconnecting.

  They say that the problem with the driver, it's when a usb modem at a speed higher than 256 Kbps or so is plugged in, it keeps disconnecting because of a bug in the driver. Please help.all my money for the purchase of a device 3 G active will simply wasted.

  The link to the fix is here:

  http://support.Microsoft.com/kb/925681

• My mac automatically disconnects while playing songs from Itunes after 20 minutes. How to prevent this

  While playing the songs on Itunes, my MacBook Air switches off automatically after 20 minutes.  This occurs regardless whether I am Mac on battery or a power adapter... I am using Ios El Capitan, but the problem exists since even earlier and happened with all versions of the operating system.  How can I prevent this logging on because it's a nuisance while playing albums longer...

  Open the security & confidentiality of system preferences, unlock, click Advanced and disable the automatic disconnection.

  (137123)

• Why my internet accounts automatically get disconnected after that my computer turns off by itself?

  I have a Compaq PC with processor Dual-Core AMD Athlon X 2 5000, and it runs Windows Vista Edition Home Premium... In my view, that is running Service Pack 2. I use the computer to check my e-mail, my YouTube and Facebook accounts (and possibly other accounts spread I connect to).

  I usually use Internet Explore to browse the web. Sometimes my computer turns off by itself due to overheating. But whenever when this happens, when I turn my computer back on and return to the use of the Internet, I've totally frustrated to find that all my accounts were automatically disconnected!

  Even when I check these boxes to keep me connected to these accounts when I turn on the computer again after a successful stop, my accounts still get disconnected!

  It only seems to happen when my computer turns off by itself without stopping... mainly due to overheating. When I turn on the computer again after a successful regular stop, my accounts are automatically saved on once again, due to activate me "Keep me connected" by checking these little boxes. But after a situation when the computer is off all the time (either by himself for a reason, either by me with strength to turn it off when my computer crashes), my accounts do not remain.

  How can I prevent my accounts automatically be disconnected so that whenever I start the computer, after it turns off by itself, my internet accounts turned on? There must be a patch for this embarrassing situation here on the internet.

  Perhaps because an improper shutdown / forced can inpact on different parameters.

  Your must not PC in all cases be having heat problems, you need to fix this (heat) before it turns into something terminal

• wireless connection is not on. disconnection after 15 seconds.

  Please tell me how to keep my connection on. Wireless lights but disconnects after 15 seconds. How to maintain my connection? Claude

  Please provide the model number of your wireless router?

  Are you having the same problem on any other computer/laptop(if any) wireless?

  What diagnosis normally do you do to solve this problem or it connects automatically after a certain period of time?

• BlackBerry Smartphones USB automatically disconnects from the PC, you can't install OS

  Hello

  I bought a used blackberry 8320. I wanted to upgrade the operating system on it, so I installed the BB Desktop Software 4.5, installed latest OS BB8320m from blackberry.com (4.5.0.294) to my PC, connected my phone to the PC via the USB cable and tried to update the operating system, during the update, my phone automatically disconnected a few times when the installer said "Waiting for device to initialize. After that, he went up to "loading software system...» Stage of module rim.bb... «, then the phone unplugged USB and BB Desktop Software displays an error «a fatal error occurred during the update...» ». At this point, my device showed 561 error with a Windows 3.0 as a window with a triangle, square, and a circle in it. I read online that this can be corrected by wiping the phone using Jl_Cmder. I did this, then he displayead '507' on the screen.

  Now, I said that I can "easily" solve this by simply loading the operating system on the device. But whenever I try to load the operating system, the phone disconnects automatically during installation. It seems to happen at the same stage.

  Later, I realized that if I connect the device to the PC and just leave, it STILL disconnects randomly, almost every 2 minutes!

  How can I fix it? I want to install an OS on my blackberry.

  I tried this on two different machines, different ports and with + without the battery.

  Hi and welcome to the forums!

  A few places to visit: Blackberry 101   tips & tricks

  Have you tried another cable?  Also, be sure that you are connected to a USB at the back of the pc. not a hub or a monitor or at the front of the pc.

  Take a look at this article: troubleshooting USB connections

  Let us know how it goes.

  Great to have you here!

• You can configure automatic disconnection of a secure area at the exit of the Muse page?

  Hi people,

  Is there a way of setting upward an autodisconnect to muse page output?

  Rather disconnect manually I want the customer to be automatically disconnected when leaving the page.

  Ciao

  Cathy

  Surely, you can look into other options than PHP.

  Whenever a new page is loaded and logged, the session is created. You can store the time in a session variable, and then check that it has not exceeded a certain limit since the last time that a user saw a page.

  You can try JavaScript etc., take a look at these threads for more details:

  http://StackOverflow.com/questions/23023916/JavaScript-auto-logout-code

  http://StackOverflow.com/questions/22471896/automatically-logout-from-page/22471948

  http://www.scriptcase.NET/forum/forum/applications/control/1888-how-to-auto-logout-after-1 0-min-idle-time-% 7Bhelp %7 D

  Thank you

  Sanjit

• Disconnect after...

  In my settings of pools, I have the option "disconnect after automatically disconnect" value "after 120 minutes '... Yes, there are a lot of days, when I look at my active remote sessions and I'll see a user state is "disconnected" and they will be disconnected for 4 or 6 or even 16 hours. I thought by the option I put in the settings of the pool, they would be disconnected after 2 hours?

  Can someone clarify the situation

  THX

  Mike

  I noticed this also in our environment. According to VMware support, this number is from when the user first connects not only the time elapsed since the disconnection. So if they keep disconnect and reconnect it will continue until they hit the total connection time.

• MY ipad has not automatically closing after update to ios 10

  MY ipad has not automatically closing after update to ios 10

  Take a look at suggestions from this thread. iOS 10 Auto-Lock does not.

• How to prevent my Mac of disconnection after that I connected remotely from iPhone and then left the iPhone app?

  I use RemoterVNC on my iPhone to log remotely on my Mac at home so the children can use the computer without my go physically to the computer. (I admit, I am a bit lazy like that). However, lately when I launch RemoterVNC (on my iPhone), do the business of the connection, and then exit the application, the remote Mac began a disconnection. He also started doing this when I connect from my first Mac via screen sharing. It is a relatively recent behavior. Someone has an idea what setting I have (inadvertently) enabled to prevent the computer from automatically disconnect when the 'access app' is no longer active on the remote device?

  Go to System Preferences > energy saving > computer sleep > drag it FOREVER to prevent disconnection of your mac.

  Think simple.

• Is there a 'keep' alive function to prevent websites to automatically disconnect me?

  Y at - it a function, Add on, etc. which will regularly send activity to a web site to prevent it from automatically disconnect me for inactivity? There are several sites that I keep in my tabs for the purposes of monitoring, but they have periods of ridiculous timeout from 5 to 15 minutes. I'm tired of having to connect everything again whenever I want to check.

  You probably need an add-on for that. Do a quick search, he came. I have not tested myself.

  ReloadEvery: reloads webpages every so many seconds or minutes. The service is accessible via the context menu (menu you get when you right-click on a web page) or via the tab context menu (right click on the tab).

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post