automatic review on HX300

Similar Questions

• "To hardcode ini file settings" or "number of automatic review with the turtle."

  Hi all

  We use a SVN repository with Tortoise here in our company for version control.

  I would like to get the revision number hardcoded in the Application (.exe version).

  I have already discovered, that there is a tool that can scan a directory and replaces a constant string in a file with the current revision number.

  (So I could automatically generate a file .ini with "Ver =... RevNr' as content)

  But I have no idea, how I can hard code a file in the application with the labview generator.

  (I think something like the .ico file, which is hardcoded in the application too)

  Someone has a sollution for this?

  Thank you

  Mario Hirth

  Hi Mario,.

  Take a look at the VI in LabVIEW 8.2.1 attached, I quickly dug it in my system.

  On the "software version VI" there must be a command group named 'Build Version Start' this type of matches the cluster 'Version to build' on the attached VI.

  If you run your VI to know what revision etc number you want, and then input that data of the default_some_version_info.vi as well as a reference for your version of VI.

  Keep in mind that you can do something else in the developmet environment at the time of execution env.

  Danny

• able to turn off the photo review?

  I just bought a DSC-HX200V and would like to be able to disable the picture review function after that I took each picture. Currently, I have to wait a few seconds after each shot until I get the shot and I'm concerned that he may make me miss shots. I also have a Panasonic FZ150 and it allows me to turn it off so I can keep shooting. Everything about the Sony is so much faster and I really like the zoom, but examination of the picture slows down the whole process. Is there a way to disable this option?

  To work around the problem, you can half press the shutter button while the image is automatically continued on the screen. In doing so, the automatic review time is cut short and the camera will immediately return to the shooting mode. This will speed up the process of shooting in succession.

  If this post answered your question, please mark "accept as a Solution.

• Send "Hotfolder" shared review files automatically?

  Hi - I was not able to find an answer, so I hope you can help me.

  Basically I have a group of 10 people who always needs to look at PDF files.

  Currently, one of them deals to send for shared review but I'd like to eliminate this step because it takes a long time.

  Is it possible to automate this process, for example by placing PDFs in a "Hotfolder" and sent automatically for these 10 people? Or y at - it another option which could completely eliminate the need for a person to send for shared review?

  Any suggestions are welcome.

  Kind regards

  Filip Jensen

  Hi Filip,

  Unfortunately shared reviews are designed to be a manual process on the desktop.

  Kind regards

  Rave

• Setting up automatic SQL point doubt [OCP review]

  Hello

  Sorry for my bad English.

  
  I am preparing for the review of 11 g OCP.

  To do this, I bought training tools to help me prepare for the exam.

  But, in the chapter on the SQL tuning Advisor, a few explanations really confuse me.

  Excerpt:

  < <

  the auto tuning SQL job runs every night during the maintenance window.

  ( By default, labour made recommendations of profile SQL, them and them if they provide the best performance improvemen automatically implementst test)

  > >

  I was convinced that it was the opposite.

  I check several databases/documentation, and it is still seems to be the opposite.

  By default, the new profile of sql are tested but not automatically implemented (you must set ACCEPT_SQL_PROFILES to TRUE to enable this option)

  But the review is validated on oracle 11.2.0.1, and I 11.2.0.2/11.2.0.3 db available.

  So maybe oracle changed the value of the default setting in the new versions.

  Can someone confirm whether I'm right or not?

  I would rather accept what's in the documentation:

  "If a SQL profile is recommended, the database tests the new profile by running the SQL statement with and without the profile. If improving the performance improves at least three times, then the database accepts SQL profile, but only if the ACCEPT_SQL_PROFILES task parameter is defined on TRUE . Otherwise, automatic tuning reports of SQL simply report the recommendation to create a SQL profile". Auto Tuning SQL

  "If auto execution of SQL Profiler is enabled (only default is disabled), then the database implements all SQL Profiler that promise a great performance benefit. The implementation occurs to the time setting so that the database can immediately benefit from the new plan. You can enable or disable automatic execution using the SET_AUTO_TUNING_TASK_PARAMETER API to set the ACCEPT_SQL_PROFILES parameter. " DBMS_AUTO_SQLTUNE

• Auto Segment Advisor - retractable automatically based on reviews

  We have recently improved gr 10, 2-11 GR 2, and I'm looking for a better way to implement one of our old processes with built-in tools in 11 g.
  
  Specifically, we had a work that took place on a regular basis to shrink the tables that has known many DML, literally hundreds of tables and indexes through virtually every tablespace. With Segment Auto Advisor included in 11g, I discovered that it does a great job to detect tables and tablespaces that needs to be reduced, but it seems that I have to manually select the items to shrink a tablespace at a time.
  
  I want to be able to do came with an approach, similar to Auto Setup SQL, where I can set up a job to automatically apply the recommendations of advisers of Segment, which is retractable tables based on the conclusions of the Segment Advisor. For example, if the amount of usable space in a tablespace of candidate is greater than 500 MB, then reduce all the tables in the context of this recommendation that would free more than 50 MB.
  
  Is there a way to do this? I guess that there are views of dictionary that can be queried to find the candidate tables requiring a narrowing and then call the command ALTER TABLE RETRACTABLE appropriate to ensure.
  
  Has anyone else made something like that? Perhaps it could be an improvement to the counsel of the auto segment in a later version?
  
  Thank you
  Bill

  Use dbms_advisor.implement_task

  Thank you

• Automatic naming of lots GL and reviews Convention

  Hello
  I am a new user of the finance module of EBS 11i. I'm working now with GL module.
  I have a question in mind. What is the convention rule of naming of auto generated reviews or lots.
  for example regarding the log import
  Source: accounts payable
  Category: payments
  Name of the journal: 1334 318685 creditors: a 5694
  
  
  My question is what is the average of the name of the journal?
  
  What is 1334? What is 318685? What is A 5694?
  
  Please let me know the convention. What can I get form seeing.
  
  
  
  Concerning
  Melchiade Aziz Khan
  
  Published by: Christian Melchiade on July 4, 2009 23:41

  Hi Natasha Melchiade Khan

  The name of the worksheet and the name of Journal entry is stored in the columns
  Reference1 and reference4 respectively in the table GL_INTERFACE.

  Log import creates a default worksheet name using the following format:
  (Optional REFERENCE1 entered by the user) (Source) (ID of the request)
  (Flag) (GID). If you enter a name of the journal, log import
  prefaced the first 50 characters of your name from the leaf to the foregoing
  format.

  Log import creates an entry of default journal name using the following format:
  (Optional reference4 entered by the user) (Category name) (Currency)
  (Currency Conversion type, if applicable)
  (Currency Conversion rate, if applicable)
  (Date of currency Conversion, if applicable) (ID of Type of load, if applicable)
  (Budget VersionID, if necessary). If you enter a name of journal entry,
  Log import prefaced the first 25 characters of your name of journal entry for
  the above format.

  It comes to Metalink Doc ref: 130915.1

  Hope this helps
  Shanks

• iPhone opens applications automatically

  my iphone 6 + open applications automatically, written letters in my browser

  This happens at any time? Or only when the phone is plugged? If this only happens when the phone is connected, you can have a bad charging cable. If this happens at any time, your digitizer is likely bad. Take it to Apple for review.

• How to replace firefox by automatically disabling the extensions such as Adobe and 1 password

  Firefox updated to the last version 41.0b1 beta how the Add - it automatically sign off three extensions,.
  -1Password
  -Adobe Acrobat
  -Avast Internet Security
  How can I replace the function disable if I can use these extensions in the latest version?

  41 of Firefox requires that extensions be signed by Mozilla, which follows a brief review process. Probably the publishers of these Add - we'll take care of this before Firefox 41 is officially released in about 5 weeks.

  If you want to run the current version, Firefox 40.0.2, instead of the beta-test version? It does not block unsigned extensions. You can enter here (scroll to your preferred language): https://www.mozilla.org/firefox/all/

  Alternatively, you can return a parameter that exists only in Firefox 41 to allow unsigned extensions. Which can be found here:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the xpi and make a pause so that the list is filtered

  (3) double-click the preference xpinstall.signatures.required to true to false

  One of these suggestions resolve the problem?

• Modify the html code in the page you are viewing automatically

  How to change automatically certain code of html on certain web pages in firefox

  As on the Web pages, I can right click inspect element and it will allow me to remove things off the page.

  I want that to happen automatically for certain Web pages when it contains some html code

  I tend to write scripts customized for this sort of thing, but for a couple of goal solvents more general, you might investigate:

  • 'Delete permanently' can be trained to remove items from a page whenever you visit. In my opinion, it works by right-clicking on that you want to delete. https://addons.Mozilla.org/en-us/Firefox/addon/remove-it-permanently/
  • Element Hiding Helper, who is a companion for Adblock Plus add-on recommended a review on this page. If you already use Adblock Plus, it's probably a more effective combination. https://addons.Mozilla.org/en-us/Firefox/addon/elemhidehelper/

• "slick economies was deleted automatically.

  I use Google Chrome and have deleted the extension several times in the browser.

  But whenever I have to wake up the computer or open Chrome after a reboot, I get a message at the top right 'slick savings is automatically eliminated, but it happens every time I open it and sometimes recurs in the extensions page in my browser settings, I even uninstalled and reinstalled google chrome but still. Should I delete my google profile which is linked to my chrome browser as well?

  < published by host >

  Follow the advice here...

  https://malwaretips.com/blogs/SL...

  EDIT: The link does not... Download and run MalwareBytes. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

• to disable automatic updates

  Firefox just did an automatic update after as I had said I wanted to review all updates until they did. How to get back to this page again? How can ensure me that I get to approve all updates before they are made?

  If you use the 'Ask Me what I want to do' and you miss the notification of update available, this window will be time rather quickly and install the update without waiting to meet you. You are better off unchecking Firefox at the top of this dialog box so that Firefox is not even check the updates of the program.

• iPad 2 Air, iOS 9.2.1 problem with E-mail konto, automatically RIMS Konto as POP3und not imap.

  I have a new iPad 2 Air running with iOS 9.2.1.  When I try to set up my e-mail account, checking account information, it automatically installs a POP3 account und not an imap.  Is it possible I can Overrides change the outcome of this review?  Why didn t Apple let tell us them what type of account, we have and not try to do it automatically for us!

  When asked for your email - enter incorrectly – then it will give you an option to choose. That said, the default value is usually IMAP - if she is entered as POP - Konto must not offer IMAP

• Automatic void printing totals

  Hello world

  Tried to find the answer how to get several pages printed with subtotals at the bottom of each column of the sum and the amount reported at the top of the next page.

  I thought at first that it would automatically be managed through the printing process, but the table does not react to the change page.

  A layout of she are often themselves depending on the printer you are using, it might be very difficult (and tedious) to grope manually...

  Exist a subtotal function "automatic" (and its corresponding State) in the pages and, if so, can someone teach how to do?

  Thanks in advance for any help.

  Alex

  You should review the guidance of impression that ian has created:

  Print the Getting Started Guide page for the numbers 3 on Mac

  Numbers access not stellar printing capability.

  It would help if you posted data of the example you have right now.

• After upgrade to El Capitan Time Machine does not automatically

  Recently, I upgraded my Macbook Pro and iMac 24 to El Capitan.  Time Machine does not automatically work on the iMac.   I now use the backup to get a backup to run.  MacBook Pro is very well.

  Thinking that this might be the associated time Capsule, I removed the disc from the Capsule and ran Spinrite on it.  Car is very good.  Then I deleted all the files on the Time Capsule and created new Time machine backups on two computers.  No problem, except the iMac not run automatically Time machine.

  And yes the selection for Time Machine is configured to run automatically.

  A bug in OS X 10.11.1 prevents automatic backups that happens when a desktop Mac (iMac, Mac mini or Mac Pro) is connected to a UPS (UPS) with the USB feature.

  Please, back up all data before proceeding.

  First, check the App Store for a later update to OS X. If it is available when you read this review, install it and see if the problem is resolved. I speak not beta versions.

  Otherwise, you can work around the bug as follows.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please triple - click anywhere in the line below on this page to select:

  sudo defaults write /Library/Preferences/com.apple.TimeMachine RequiresACPower 0

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the Terminal window by pressing the command-V key combination. I tested these instructions only with the Safari browser. If you use another browser, you may need to press the return key after pasting. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal.

  Restart the computer and test.

  (Credit for this solution for chrfr of logicielmac.com).