Automatic start after power outage - Inspiron 20 all-in-one

Similar Questions

• Problem starting after power outage

  I am running XP Professional. Last Nite we had a power outage and now I can't get my Dell E510 to initialize. When I reboot, I get a message that my hard drives cannot be seen. I tried holding F8, but it doesn't get me nothing, but the same message. Disc I tried diagnostcs but the computer says it can't see the disks. Any help would be really appreciated.
  Frankdarpa

  Hello

  1. What is the exact error message?

  You can check the troubleshooting provided in the link below steps to fix the problem.

  http://support.Microsoft.com/kb/321626
   

• Dell Inspiron 3043 All in One-2nd monitor?

  My dell is not detect a 2nd monitor when I connect it to my Acer monitor.  I tried to use the VGA cable with a HDMI adapter.  I also tried to use a DVI cable to HDMI.  The Acer monitor only has VGA and DVI - D connections?  Is there another way to connect the 2nd monitor?

  I have the Dell Inspiron 3043 all in one

  You can consider using a USB2 > DVI - D or USB2 > adapter VGA to connect the second monitor, but they are not exactly cheap.

  And if you buy one of these adapters, make sure that the one you get can clone (1) internal display, (2) extend the desktop on 2 screens and (3) show 2 different screens simultaneously and is compatible with any version of Windows that you are using.

• Z600 workstation: workstation Z600 not auto start after power loss

  I use a HP Z600 workstation.

  BIOS version

  786 G 4 V0.3.54

  OS is duel boot Windows 7 Professional 64 - bit Ubuntu & 14.04LTS

  Using Setup F10 I have:

  1. active Advanced-> Bios Power On for all days of the week and took one hour for power on

  2. under Advanced-> Device Options, I enabled wake on lan

  3. under advanced-> power on-> Options after the loss of power, I put the option "always on."

  If push the power on button on the front of the machine, it auto starts with Linux.

  If I pull the plug, the machine switches off immediately.

  If I plug the machine in, nothing DON'T get PAST!

  It lights up. I have to press the button.

  If I unplug the machine and then plug it in and wait for the moment Pwoer of BIOS on, do NOT start machine or turn on at the set time. Again, I must press the button to turn it on.

  What I'm missing or doing wrong. The machine is used as a remote server. It should restart automatically after a power loss.

  Any help would be greatly appreciated.

  Nothing changed and the problem disappeared.

  Had a power outage for 4 hours in the building.

  When the power was restored machine automatically restarted.

  So pulling plug on Z600, machine is not self-priming.

  Be able to fail the entire building: boots of router, monitor, Z600 and machines.

• Reference Dell R710 does not start after power failure

  Hello, I tried to find answers on the forum but nothing so far

  I have this R710 at home that I use as a media server, it was working fine before a power outage the other night (no I don't have a UPS :-(

  When the power returned, I noticed one of lighting power supply has been turned off, so I took it out of the unit, but the unit still won't turn.

  I still have a so-called good food because the small green LED on the motherboard lights, and I can access the iDRAC, this feature, I didn't before the net Searchin' for answers, I'm kind of a novice with the servers.

  When I access the iDRAC, on the power supply page, I see nothing, no power supply listed.

  Is it possible that a diet might be "half bad", enough to work the emergency circuits but not the power outlet?

  Symptoms:

  Camera lights.

  Can access the functions of the Idrac, but doesn't do anything if I try to activate it via the tasks "quick launch".

  Power supplies are not visible on the pages of the Idrac.

  Display before work.

  Server was very well just before a power failure which took one of the PSU

  The remaining 870 PSU has the green light on, and the fan works for 2 seconds every time I cut the power it.

  Thanks for any help.

  OK, well... no answers.

  I found a place locally that sold a diet so I arrived with my server, I told them I would buy the power supply that I confirm that the fault was in fact the power supply.

  Well, you know, the unit started correctly with the new power supply, now in IDRAC, I see both power supplies but on that faulty, he reads "present, entry lost.

  So the answer is YES, a power supply may be defective, even if the green light is on.

• Bluetooth does not automatically start after start

  Hello

  I have a SONY VAIO with built in Toshiba Bluetooth. My bluetooth in the taskbar icon no longer appears when Windows starts. That's happened? I always start the Bluetooth manually in Control Panel... Help, please. How can I activate Bluetooth on starting again? Thank you very much.

  I don't know how it works on Sony laptop computers, but on my Toshiba BT application automatically starts when the BT module is enabled. In any case, try to define as suggested by the creation of shortcuts.

• How to make the virtual machine starts automatically after power is declining for all ESX host?

  We meet just power down and lost electricity ESX host.

  When we start the ESX host, we can on each individual virtual machine.

  Y at - it a setting that we can put in place for these VMs critics may start se?

  Your opinion is requested.

  Thanks for your advice. He agrees with your saying that the start / stop sems to be buggy.

  It's only disable it every time that you enable VMware HA.

  But it works (if enabled) and may be useful to define how the system starts up.

  André

• Inspiron 2330 all-in-one, white screen on startup after Dell Logo

  Hello

  I just bought an Inspiron One 2330 with Windows 8 this week which was working fine until today.

  When I go to it starts, I get the Dell logo and Windows 8 points floating around in a circle below. When these disappear after five or six seconds, as often happens with the boot process, nothing happens. It allows access to the screen of Windows 8 with time and this landscape of space-age thing, but now I get nothing, just a blank screen.

  Please could someone help? Everyone knows this?

  Thank you

  Hywel

  I thought that I will answer my own post because I have not managed to solve this problem after the effort of several hours.

  I managed to enter the automatic repair of Windows by following these steps. After ignition, the Dell logo appears then the swirling circle. Is immediately turned off by pressing the power button until it stops. Repeat 2 times more, how the computer would decide that Windows fails to start, so it should start the auto repair.

  The automatic repair feature spotted that there was a problem with the video driver (as I suspected) and disabled. I could then restart normally and use system restore to return to a game without the danger of drivers, before I was running Windows Update.

• Computer does not start after power surge

  My laptop is not able to restart after a cocoralie energy cut. Safe mode request a CD of Installation, but I don't have it. I have just my product key of Windows Vista Home Premium OEM law. What can I do?  I tried to get help from the Microsoft page, but they ask a number of identification, all I have my product key, but seems it is not the same... Help!  I fear for my files.

  If vista was preinstalled, you are not free Support Ms.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Try this remedy:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Vista does not start after power failure

  It is a Dell Inspiron 1525 with Vista 32 - bit, recently replaced hard drive

  My daughter has been using the computer and the power failed due to low battery.  Now, the computer does not start normally and not all programs will run.

  If I choose "safe mode", it hangs on crcdisk
  If I choose 'window start normally' it crashes to the screen of Microsoft Corporation
  If I choose "last known good configuration" then it seems to start normally, but does not all programs run.

  I tried to boot from the OS disk, but it ignores the entire disk
  I tried to run the installation disk once the computer is running, but it freezes.

  Need solutions.  Thank you.

  Hello Bakajanaidesu,

  Thank you for posting.  It seems that you have a hardware error or failure with your hard drive.  In this case, I recommend that you contact your Dell technical support for more information on how to correct this problem.

  Please let me know if I can be more useful. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• ESXi 5 managing network not automatically start after reboot, or when the output of the mode standby

  vSphere 5.

  ESXi5.

  HI all 5 ESXi installed on HP BL460c G7. HP C7000 Enclouser system connected to the NAC (switch HP series A5800) via the Module HP FlexFabric 10 Gbs. The server has 6 vmcins:

  (1) management network - 2 NIC (1 GB per nic)

  (2) vMotion Network - 2 NIC (1 GB per nic)

  (3) Vitual Machine networks - 2 NIC (2 GB per nic)

  (4) zFCP - 2 network cards (6 GB per nic)

  After you restart or when the output of the mode standby, the management network starts does not automatically, you need to restart manually from the console directly. Hypervisor ISO downloaded directly from the vmware Download Center and all the recommended HP drivers downloaded and installed from HP Download Center.

  OK, another thing you could try is this change that HP recommended for my situation. The CLI performs: esxcfg-module - s "heap_max = 20971520" be2net

  and reboot. The memory default chunk size is not large enough and will change to this size in the next version of the driver.

  Also, have you tried yet 5.0 U1? There are a lot of bugs in U1.

• OSWatcher BB does not automatically start after reboot on a linux machine

  Hello
  I configured the OSW on my 2 node RAC on linux.
  When I start to startOSWbb.sh as the user oracle, it works ok.
  I installed the osw-service - 0.0.6 - 1.noarch.rpm rpm to add it to the service of linux, and indeed, he created the etc/init.d/osw.
  but after restarting the service of the OSW does not work. I see that everything has begun and has created a new folder to archive, a new vmstat.header, new vtop.tmp/tmp. but that's all.
  It is not running and it do right files in archive folder / file.
  also ps - ef | grep-i osw returns nothing
  where can I find its newspapers (saw nothing to NS)
  
  Thank you
  Yaron
  
  
  
  install oswatcher for RAC
  ============================
  
  mkdir/users/oracle/osw Pei
  CD/users/oracle/osw /.
  mkdir lxodsdb1tst
  mkdir lxodsdb2tst
  CP oswbb511_512.tar/users/oracle/osw/lxodsdb1tst
  tar - xvf oswbb511_512.tar
  CD oswbb
  
  lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb > ls
  analysis gif lock OSWatcherFM.sh oswib.sh oswsub.sh tarupfiles.sh vmstat.header xtop.sh src
  docs headers mpsub.sh OSWatcher.sh oswnet.sh profile startOSWbb.sh tmp vmsub.sh
  Exampleprivate.NET iosub.sh nfssub.sh oswbba.jar oswrds.sh pssub.sh stopOSWbb.sh topaix.sh vtop.sh
  
  
  CP Exampleprivate.net private.net
  chmod 775 private.net
  VI private.net
  
  ######################################################################
  # This file contains examples of how to monitor private networks. TO
  # monitor your private networks create an executable file in the same
  # directory named private.net. Use the example for your host below operating system.
  # Make sure that you do not delete the last line in this file. Your file
  # private.net MUST contain the line rm lock.file.
  ######################################################################
  #Linux example
  ######################################################################
  echo "zzz * '' date'.
  Traceroute - r f lxodsdb2tst-priv
  Traceroute - r f lxodsdb1tst-priv
  ######################################################################
  # DO NOT DELETE THE NEXT LINE!
  #
  ######################################################################
  Locks/lock.file RM
  
  
  ./startOSWbb.sh
  
  
  lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb >./startOSWbb.sh
  lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb >
  Info... You don't have a value for snapshotInterval.
  Info... Using the default value = 30
  Info... You don't have a value for archiveInterval.
  Info... Using the default value = 48
  Defining archive log directory to/users/oracle/osw/lxodsdb1tst/oswbb/archive
  
  Test for the discovery of the utilities...
  VMSTAT found on your system.
  IOSTAT found on your system.
  MPSTAT found on your system.
  NETSTAT found on your system.
  TOP found on your system.
  
  Testing for the discovery of the OS CPU COUNT
  OSWbb is looking for the NUMBER of CPUS on your system
  NUMBER of CPUS will be used by oswbba to automatically search for cpu problems
  
  NUMBER of CPU found on your system.
  UC = 24
  
  Discovery completed.
  
  
  
  
  
  
  =================================================== on lxodsdb2tst =================================
  
  lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst > tar - xvf oswbb511_512.tar
  CD oswbb
  
  lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb > ls
  analysis gif lock OSWatcherFM.sh oswib.sh oswsub.sh tarupfiles.sh vmstat.header xtop.sh src
  docs headers mpsub.sh OSWatcher.sh oswnet.sh profile startOSWbb.sh tmp vmsub.sh
  Exampleprivate.NET iosub.sh nfssub.sh oswbba.jar oswrds.sh pssub.sh stopOSWbb.sh topaix.sh vtop.sh
  
  
  
  xodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb >./startOSWbb.sh
  lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb >
  Info... You don't have a value for snapshotInterval.
  Info... Using the default value = 30
  Info... You don't have a value for archiveInterval.
  Info... Using the default value = 48
  Defining archive log directory to/users/oracle/osw/lxodsdb2tst/oswbb/archive
  
  Test for the discovery of the utilities...
  VMSTAT found on your system.
  IOSTAT found on your system.
  MPSTAT found on your system.
  NETSTAT found on your system.
  TOP found on your system.
  
  Testing for the discovery of the OS CPU COUNT
  OSWbb is looking for the NUMBER of CPUS on your system
  NUMBER of CPUS will be used by oswbba to automatically search for cpu problems
  
  NUMBER of CPU found on your system.
  UC = 24
  
  Discovery completed.
  
  From black box OSWatcher v5.1.1 Sun Nov 11 10:18:09 IST 2012
  With SnapshotInterval = 30
  With ArchiveInterval = 48
  
  OSWatcher Black Box - written by Carl Davis, Centre of Expertise,
  Oracle Corporation
  For questions about installation and use, please go to MOS (Note: 301137.1()
  If you need assistance or have any comments or improvements
  queries, you can email me [email protected]
  
  
  Data are stored in the directory: / users/oracle/osw/lxodsdb2tst/oswbb/archive
  
  From the collection of data...
  
  
  
  
  ==========================================install osw rpm===========================================
  
  quo
  CD/users/oracle/osw /.
  
  [root@lxodsdb1tst osw] # rpm - ihv osw-service - 0.0.6 - 1.noarch.rpm
  Preparing... ########################################### [100%]
  1:OSW - service # [100%]
  
  VI/etc/sysconfig/osw
  
  # Put OSWHOME in the directory where you have unpacked OSW or OSWbba
  #OSWHOME = / opt/oswbb
  OSWHOME = / users/oracle/osw/lxodsdb1tst/oswbb
  # OSWINTERVAL set the number of seconds between collections
  OSWINTERVAL = 30
  # OSRETENTION set the number of hours logs must be kept
  OSWRETENTION = 168
  # Put OSUSER to the owner of the directory OSWHOME
  OSWUSER = oracle
  
  
  
  
  [root@lxodsdb1tst osw] # / sbin/chkconfig osw on
  [root@lxodsdb1tst osw] # / sbin/service osw start

  Here's what worked for me (I had the same problem):

  I uninstalled the osw-service RPM.

  I've added in /etc/rc.local the following command:

  ~Oracle/bin/oswbb CD & / bin/su oracle-c ' source ~oracle/.osw_profile & nohup./startOSWbb.sh 60 240 > / dev/null 2 > & 1 & ".

  Where:

  ~Oracle/bin/oswbb is where I untarred archive oswbb520.tar

  ~Oracle/.osw_profile looks like this (it has the same content as the old/etc/sysconfig/osw):

  # Put OSWHOME in the directory where you have unpacked OSW or OSWbba
  OSWHOME = / home/oracle/bin/oswbb / ${HOSTNAME}
  # OSWINTERVAL set the number of seconds between collections
  OSWINTERVAL = 60
  # OSRETENTION set the number of hours logs must be kept
  OSWRETENTION = 240
  # Put OSUSER to the owner of the directory OSWHOME
  OSWUSER = oracle
  # Set the correct destination folder
  Export OSWBB_ARCHIVE_DEST = / home/oracle/log/oswbb / ${HOSTNAME}

  Published by: user13134683 on November 24, 2012 10:01

• Long boot after power outage

  I have several computers (Dell Optiplex 790, XP Pro, domain environment) which seem to be affected by a very long startup having experienced a kind of power event.  Starting log show that it seems to be a long gap (between 5 minutes and 45 minutes) between loading the autochk and csrss.exe.

  During this period of latency - after the XP splash screen and the user login screen - the screen is black with only an occasional HDD activity) as a heartbeat) and no indication that it running a scandisk or anything like that.

  Running chkdsk does not seem to solve the problem, and reimage the computer sets the startup time, so I don't think it is hardware related. I know that autochk has a function of delay, but I think not autochk is actually blocked because the duration is less than 1 second, but the following process (csrss) does not start until 10-20 minutes later

  anyone has any ideas I can try you are looking for? Reimage that a resolution is an indication that emit less drastic corruption of the OS is the underlying cause

  Since you're an IT professional, you will have much more luck in this forum:

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
  I wish you a quick resolution!

• Border in black screen HP Mini 210, screen shifted downwards - problem after power outage

  HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC

  Some specifications:

  Display: 25.6 cm (10.1 ") diagonal WSVGA LED HP BrightView Infinity Widescreen Display (1024 x 600) SUBMISSION

  Battery has been dead for a long time.

  My display drivers and BIOS have been recently updated from the HP website.

  After a power failure and a reboot, the screen looks weird. It was moved about an inch down with a black border at the top, on which the mouse won't and the task bar is not visible, as is the bottom of the screen.

  When I go to the screen resolution in Windows by right-clicking on the desktop resolution is set at 1024 x 768, when I click on advanced settings, the monitor tab, monitor is set as a Monitor (1024 x 768 60 Hz) generic Non-PnP.

  When I change to 1024 x 600 it seems blurred and stretched vertically, but the screen is always shifted down with black border on top.

  When I get the Intel graphics settings I can make the same changes as in the dialog Windows (640 x 480, 800 x 600, 1024 x 600, 1024 x 768).

  In image format Options when I select full-screen (non-frontiere) the black border is fixed but always tense vertical screen but the screen is cut down with no visible taskbar.

  Graphics driver reinstalled so that some Type Monitor of windows drivers, nothing changes.

  When I turn on the laptop, the screen HP Quickweb appears also as a 1024 x 600 stretched vertically without black border at the top but will disable the display down.

  It seems that Windows and Hp Quickweb see at 1024 x 768 60 Hz display after the power failure.

  Before that, I had installed Windows updates, but nothing on the display drivers.

  I only got a point system restore leave on earlier that day (very low disk space?) but that did nothing.

  Guess it is a registry/driver issue since no pixel is bad and the black border on top is set in image format Options when I select full-screen (sans-bordure). Any suggestions please?

  Of the information system

  Model: HP Mini 210-1000 actually it's HP Mini 210-1060 EV PC
  Name of the operating system: Microsoft Windows 7 Starter 32-bit
  Version: 6.1.7601 Service Pack 1 Build 7601
  The version of the BIOS/Date: Hewlett-Packard F.24, 18/03/2011

  Display:
  Name: Intel(r) Graphics Media Accelerator 3150
  PNP device ID: PCI VEN_8086 & DEV_A011 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 10
  Adapter type: Intel(r) Graphics Media Accelerator 3150, compatible Intel Corporation

  Name: Intel(r) Graphics Media Accelerator 3150
  ID device PNP PCI VEN_8086 & DEV_A012 & SUBSYS_3660103C & REV_00\3 & 21436425 & 0 & 11
  Compatible adapter Type not available, Intel Corporation

  SOLVED.

  After noticing the OS startup screen/HP resolution looked normal, I just removed the plastic bottom and hit the CMOS battery, after reading this somewhere, because the audio drivers and webcam have been uninstalled too whenever I rebooted the netbook.

  He has not moved even because it was recorded well.

  So I restarted and the resolution has been set.

  Now, can't make the webcam work even though I reinstalled the driver...

• does not start after power failure

  Here is what the screen shows

  File\windows\system32\drivers\aswvmm.sys
  Status: 0xc000000d
  Info: windows has no bread because a crytical system driver is missing or damaged

  I cannot drive vista or files by e-mail and will put on a flash drive or disc thank you

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs).

  Vista ultimate is available. Read the information in the lower part of the message on how to use it for other editions of Vista:

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Most manufacturers have more available Vista recovery disks, but you may be lucky with your manufacturer.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.