Automatic stop to print received faxes

I have a HP Photosmart C410b all-in-one and it automatically prints faxes when they recevied. I get a lot of "Junk" faxes and I would like to disable automatic printing. Ink is expensive! How can I do this?

mlipm,
There is no way to disable the printing of faxes, once they are received. The only way to avoid the received faxes would be to disconnect the telephone line from the printer.

Tags: HP Printers

Similar Questions

  • problem receiving fax Officejet 8600

    On an officejet pro 8600 fax. When faxws are received, I want each sent page just be printed on a sheet, one side. Now, when someone sends a fax to several pages, the printer uses both sides of the paper. I don't want to. I want each sent page just be printed on a sheet on one side. I can't find anywhere in the documentation how to configure to print received faxes only on one face.

    Someone has an idea?

    Hello

    From the front panel of the printer, click on the GREEN button at the top of the screen.

    Using the arrows, find and tap the Print to Fax duplex option.

    Press on print on 1 side.

    Any future fax page will be on a separate page. printerd

    Kind regards

    Shlomi

  • HP6210 WHILE WE - can send faxes; Can receive FAXES... BUT NOT both

    I have a 6210 HP on a Vista system and recently reloaded the OS and software HP 6210.

    If I put the HP go, I can send faxes, if I put another way, I can receive faxes, but cannot make the software both send and receive.

    I have two phone numbers... a voice for the mail, a fax (with distinctive ring).

    HP tells me that it is a problem of H/W.  If so, then why, according to my installation software can either SEND ok... OR on my installation software affecting RECEPTION OK.

    Any HEP would be appreiciated.

    [email protected]

    Charlie

    First of all, forget the software. It has nothing to do with the sending of faxes. Now since you have a ringtone, press the Setup button > advanced fax setup > Distinctive ringtone and select the ringtone to your phone line type. Now the printer receives faxes that runs through the phone with the distinctive ring number. Make sure you keep the auto answer option on. If it works, then sending faxes should not be a problem.

  • M1212nf MFP do not automatically receive faxes - I always have to press to receive faxes.

    Everything was ok when we bought the thing - he worked for several days without problem.

    And then just stoped to receive faxes automatically. It is set up to automatically answer after 5 rings (tried them all, min and max - help do not). Now press the button manually, then it prints it. Line - analog, with phone attached to aio. No dedicated fax line.

    Don't have reset to the default values and set to the top a few times, does not work. New firmware - did not help either.

    All other work just perfect - scaning, printing, faxing on 12pc (winXP, win7) network.

    Any ideas?

    Hi cskelton1611,

    Please check your private messages and let me know if the steps fixes your problem?

  • RECEIVE FAXES AUTOMATICALLY

    I have a HP 7520 and configured in automatic response.  At this current time, I have to be in front of my 7520 push the button I agree or I do not receive the fax.  How to I receive faxes automatically without being present.  I leave my printer on 24/7.

    help and thanks

    I also ran a TEST FAX and got all passes and verified that the AUTO ANSWER is ON.

    Hello BobW664719,

    Welcome to the HP Forums! I understand that you can not receive faxes automatically using your Photosmart 7520.

    It depends on what kind of additional devices that you have on your phone line, and the settings are correct in your printer. This includes the following:

    -You have an answering machine? If so, please list the rings how this feature has.

    -Do you have a distinctive pattern of the ring?

    -Do you have an internet service on this phone line?

    Make sure that you disable the Mode of fixed error on your printer. It of in your settings Menu, Fax Menu, then advance Setup.

    Impatience on your part.

  • How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

    How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.

    Thank you very much for your help, if necessary.

    Quite a few questions, send, but I will do what I can to answer them.

    I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.

    In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.

    Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.

    You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.

    I hope this information is useful!

  • OfficeJet Pro 8620: officejet pro will not automatically print incoming faxes & answer

    I have a brand new Pro of Officejet 8620.   When I receive incoming faxes, I must be at the printer to press the ACCEPT button on the LCD screen.  I put the printer/fax AUTO ANSWER.    It did not work.  Any suggestions on how to have the unit automaticlly answer & print incoming faxes without having to be in the machine when machiines phone line rings.   I put the machine to meet Telec.  It is not set to meet incoming voice communication.

    Thank you for your informative reply!  PROBLEM SOLVED.  I was able to access the HP phone support people yesterday afternoon.  They very kindly put me through many of the steps you mentioned, that didn't work.  Finally the second support officer who got me the steps I have press the RESET button in THE SETTINGS on the LCD screen by DEFAULT and immediately after this step, solved the problem.

    My suspicion is that the machine, although that brand new, was in fact a refurbished machine sent to me by HP to replace the original purchase, which had a LCD screen showing only Chinese language that could not be changed.

    The replacement machine probably had been implemented at the different use of mine.

    Thanks to the lady who finally suggested hit the RESET button to THE DEFAULT SETTINGS as well as other people who responded!

    Everything is fine!      Aaron

  • My j3680 solution Center has stopped working. I can print and fax manually. I downloaded the full

    My j3680 solution Center has stopped working. I am able to print and fax manually but can't scan. My system is windows 7.

    The 3680 is an officejet all-in-one.

    Hi mahroch,

    The first thing to do to solve this problem would be to run printing HP and doctor Scan. It is a quick and simple tool that diagnoses and solves many problems of printing, scanning and connectivity. See the following link for more information on downloading, installing and running this tool:

    http://goo.GL/SGZxs

    Let me know if this solves the problem, and if not, what the tool provides.

  • OfficeJet 4500 Wireless stopped receiving faxes

    The above mentioned has stopped receiving faxes. We can send faxes but not receive. There is no error message to come on the machine. It does not replace the cartridges. The machine rings, but he gets nothing. Can someone help, please?

    Hello

    Try the troubleshooting steps in this DOCUMENT.

  • HP Color LaserJet M476 MFP Pro: How to receive faxes on pc and print later?

    How to receive and record the incoming faxes on pc and brought it back later.

    Hello

    the series M476 supports nto, receive faxes to a computer.

    Below you can find the data sheet:

    Fax features: Interface PC support: No.

    http://store.HP.com/wcsstore/hpusstore/PDF/cf387a.PDF

    Kind regards

    Shlomi

  • My windows XP does not automatically receive fax

    Hi, I created my Windows XP for auto-recevoir fax after 3 rings. It does not work. Can I receive fax manually when the phone rings. I can also send faxes. I have Windows XP service Pack 3 installed. My fax modem is a SmartLink Voice Modem.  Tried to search Microsoft for an answer, but came in white. Appreciate any advice/suggestions.

    Thank you.

    Hello

    I suggest you to return these Microsoft KB articles and check if it helps:

    How to receive a fax in Windows XP
    http://support.Microsoft.com/kb/306662

    How to enable and configure the fax service in Windows XP
    http://support.Microsoft.com/kb/306550
  • HP Officejet Pro 8600 N911a: HP Officejet Pro 8600 N911a - Print when Fax is not saved

    Can I do so a fax is printed when it is not registered?

    I know that I can put to print and save every time, but I trust HP digital fax to save paper.

    If a fax is not registered, either because of a network error, or if the computer that logs usually in is cut off, can just fax be printed?

    @MrMeow, it's nice to meet you.

    I think I found something that can help your fax dilemma.

    This information has been in the User Guide for the Officejet Pro 8600 e-all-in-one - N911a; PG 69.

    Set up backup fax

    According to your needs best and security, you can configure the printer to store all faxes it receives, only faxes it receives while the printer is in an error condition, or none of the faxes it receives.

    The following fax backup modes are available:

    On >  The default setting. When backup fax is enabled, the printer stores all faxes received in memory. This allows you to reprint up to eight more recently printed faxes if they are always saved in the memory.

    NOTE: When the memory of the printer is low, it replaces faxes print, older because it receives new faxes. If the memory is full of unprinted faxes, printer stop to answer incoming fax calls.

    NOTE: If you receive a fax that is too large, as a very detailed color photo, it cannot be stored in memory due to limitations of memory.

    Error only > Causes the printer to store faxes in memory only if there is an error condition that prevents the printer to print the faxes (for example, if the printer is out of paper). The printer continues to store incoming faxes, as long as the memory is available. (If the memory is full, the printer stops responding to incoming fax calls). When the error condition is resolved, the faxes stored in memory automatically, print and then they are deleted from the memory.

    Off >  Faxes are never stored in memory. For example, you might want to disable fax backup for security reasons. If an error condition occurs which prevents the printer to print (for example, tracks paper printer), the printer stops responding to incoming fax calls.

    NOTE: If the backup fax is turned on and you turn the printer off, all faxes stored in memory are deleted, including any unprinted faxes that you might receive while the printer was in an error condition. You must contact the senders asking them to return the unprinted faxes. To get a list of faxes that you have received, print the Fax log. The Fax journal is not removed when the printer is off.

    To set backup fax from the printer control panel

    1 tap (right arrow) and select Setup.

    2. press Fax Setup, and then click Advanced fax setup.

    3. press on the backup Fax reception.

    4. press on , error, or out of service.

    Reprint of faxes received from memory

    If you set backup fax mode to On, received faxes are stored in memory, whether the printer has an error condition or not.

    NOTE: After that the memory is full, the oldest faxes, prints are replaced as new faxes are received. If all stored faxes are not printed, the printer does not receive fax calls until you print or erase memory faxes. You can also delete the faxes in memory for purposes of confidentiality or security.

    According to the sizes of the faxes in memory, you can reprint up to eight more recently printed faxes, if they are still in memory. For example, you will need to re - print your faxes if you have lost the copy of your last draw.

    To reprint the faxes in memory from the printer control panel

    1. make sure you have loaded paper in the main tray.

    2 tap (right arrow) and select Setup.

    3. touch Tools , or Faxand then select reprint faxes in memory. The faxes are printed in reverse order, where they were received with the most recently received fax printed first, and so on.

    4. If you want to stop reprinting the faxes in memory, press the Cancel button.

    Please let me know if these steps solved your problem, or if there is anything else I can do to help.

    I look forward to hear from you!

    Thank you

  • HP Officejet Pro 6830: Receive faxes with a HP officejet pro 6830 w / answering machine

    I had an OLD officejet model that could receive faxes even if the answering machine was not connected directly to the fax machine the 6830 manual says that it must be directly connected.  My current Brother printer does NOT receive faxes because of this problem.  Anyone know if I directly connect my machine to this model (Officejet 6830) to make it work?  I won't buy it if it will not work.

    Hello @JPJ408,

    Welcome to the Forums of HP Support!

    I understand that you are looking to buy a printer all-in-one HP Officejet Pro 6830 for fax purposes. While the User Guide advise you to plug the answering machine directly on the back of the Officejet unit, it is not necessary.

    If you have a fax with an answering machine on her line, the only requirement is that the fax is set to two rings higher than the answering machine. Most of the responders are put back on 4 rings. As a result, you would set your Officejet to automatically pick up on 6 rings. In this way, when a voice is heard, you can manually respond to the call before the answering machine to pick up. If you are not home and then people can still leave messages on your answering machine. If you have a fax to come through, do not respond. The answering machine will pick up after 4 rings. At this point the fax machine "listen" on answering machine message and if fax tones are detected, the fax will take over and receive the fax.

    I hope this helps clear up any confusion.

  • How to configure my Mac (OSX Lion) to receive faxes directly from my HP Officejet 6500 +.

    I have a Mac OS x Lion and a HP Officejet 6500 +. I would like to save incoming faxes directly to my computer, rather than having the 6500 to print them. I installed the driver of HP6500 on Mac: print and outgoing fax jobs. Using the configuration Print & Scan on Mac System Preferences, I can select the Officejet 6500 fax, click on "receive options" and turn on "receive faxes on this computer": I got him to answer after 1 ring and save faxes to an appropriate folder.

    The problem is that the incoming faxes even print directly on the 6500 and are not registered on the computer.

    I tried following the instructions on the manual for 6500 located here: http://h10032.www1.hp.com/ctg/Manual/c02519721.pdf but the indications on page 57 for the implementation using the HP tell me to select the "applications" icon in the toolbar and it isn't here.

    Any help would be appreciated, thanks.

    Well, this got me half way there, thank you.

    Once you have installed the software which recommends ShlomiL, then you must enable the option Archive digital as described, which won't be available unless the device is physically connected via a USB cable. Wireless is not an option. The value "Digital Fax archiving" 'Save to Folder' and then choose a folder that is accessible in writing-world. The folder must be specific for incoming and used faxes for anything else! The 'Notification of incoming Fax' value to what you want.

    Then go into the front panel of the 6500 and disable printing fax. (There is an option buried under "base set up the fax / Fax HP Digital")

    Finally, create an automator workflow that automatically prints any picture of new place in the folder of incoming faxes created there are two steps. Set it to print on a printer laserjet cheap rather than ink-jet 6500 ridiculously expensive. (Or skip this step if you're ok with not having a copy of incoming faxes).

    You can ignore the options useful and well-designed integrated on your Apple about "receive faxes on this computer". HP only plays nice with that.

    I still hate the HP, but at least now I didn't spend $35 for a new inkjet cartridge every two weeks.

  • Photosmart 7520 - unable to receive faxes

    New photosmart 7520, (Window XP) reception of fax problems. Test Fax - spent, several times report. When first installed and then received fax he stopped receiving.  Uninstalled and reinstalled, I wasn't able to scan either. Scan fine at the moment, but still not able to receive faxes. I have an answering machine on the same line, with the cord from the phone connected to the back of the printer, ext 2, and the fax cord connected to the wall outlet.

    Hi TaTToo214,

    You can send a fax?

    How many rings before answer on the printer?

    How does that compare on the answering machine?

    For a better fit, the printer must be on 6 rings and the answering machine set to 4.

    Please consult this document:

    http://support.HP.com/us-en/document/c01633010

    It's for a different model, but it has good troubleshooting procedures.

Maybe you are looking for