automatic update after update to msg config. 3 0f 3 & re boots

Remember - this is a public forum so never post private information such as numbers of mail or telephone!

Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  • After automatic update, I received a message from configuration stage 3 of 3 0 0/0 full. After a few minutes, it restarts and has the same message 3 of 3 cong tried to remove all power, safe mod but always goes back to confg. 3/3.

Restore point:

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

 

If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

And try it in the Windows Update Forum:

Windows Update Forum:

You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

In this way, you will receive the best help.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • MY ipad has not automatically closing after update to ios 10

    MY ipad has not automatically closing after update to ios 10

    Take a look at suggestions from this thread. iOS 10 Auto-Lock does not.

  • TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why this keep happening after

    TB 31.5.0 Win 7 after the TAB key for the automatic update no longer creates new address line "write" (enter the done key) but I want the TAB key! Why is - this seems to happen after each automatic update? Cant we get 'option' to use the TAB key to navigate through the lines of address "write"?

    TAB through the fields that exist. It is the function of the TAB.

    Otherwise you could never use TAB to go out in a field for example: subject. It would create an indefinate number of fields and are unable to function as a TAB key.

    TAB does not back to THE fields,
    New crests to THE fields or donkey typing/selection enter/return address, you can use the selection of mouse click.

  • Firefox don't appear or start on my XP PC after an automatic update (12/02/2014?); IE appears but freezes. Always have access to the e-mail. Advice to restore Firefox?

    The morning after the automatic update, my XP PC monitor had a black solid (or was it blue?) screen with only the arrow cursor visible. Move the mouse did nothing except move the arrow cursor. I rebooted and fortunately the Windows logo appears, and I was able to access all the programs I normally use except Firefox. When I click on the Firefox icon in the XP boot screen, the arrow cursor turns into the hourglass. The hourglass stay right there. Firefox can run in an alternate universe, because when I ran CCleaner, I received a message saying that Firefox took a long time to close, and I want to force it to close.

    I'm still able to send and receive emails, which indicates the Internet access. However, with no visible browser, I don't know how to connect to my XP PC Web sites. How can given these limitations, I go about restoring Firefox on my XP PC?

    Thank you.

    You are welcome

  • After an automatic update of firefox 23, wlecome to firefox / page Android still open

    The automatic update is the update for Firefox 23 several days ago. Since then, when I open Firefox control compatibility module runs before opens Firefox and Firefox always opens on the welcome page in Firefox that wants connect me my PC with an Android phone. Since I don't have an Android phone, it is annoying to have to close this tab before you do anything else.

    Previous updates took me at the time that the first homepage after the update, I opened Firefox. At least this time Firefox has not tried to change my home page from the one I chose to the Google search page. I can search in the toolbar if I want; I don't need Firefox to open the Google search page.

    Hello

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
    Note: This will make you lose all the Extensions, open Web sites and preferences.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

  • My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

    My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

    What can I do?

    Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  • Automatic update repeatedly prompts to apply the same updates, even after their application.

    I had the following problem with one of my workstations to office for a few weeks. Repeatledly of automatic update prompts me to apply the following updates even after their application.

    -Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 security for Windows 2000, Windows Server 2003 and Windows XP x 86 (KB979909)

    -Microsoft .NET Framework 3.5 SP1 update for Windows Server 2003 and Windows XP x 86 (KB982168)

    -Update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB983583)

    -Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 update for Windows Server 2003 and Windows XP x 86 (KB982524)

    I'm running Windows XP Professional Version 2002, Service Pack 3. What can I do to fix this?

    Thank you.

    Hi graphicsRat,

    1. download .net Cleanup Utility from the following link:
    http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
    Search (http://blogs.msdn.com/cfs-file.ashx/__key/CommunityServer-Components-PostAttachments/00-08-90-44-93/dotnetfx_5F00_cleanup_5F00_tool.zip)
    2 download and install .net Framework 3.5 SP1 by clicking on the link below (this will also install .net Framework 2.0 SP2 and 3.0 SP2):
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

    If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • After Windows automatic update, laptop screen becomes completely white

    After the automatic update of Windows, the screen of my laptop to become completely white. I have to Ctrl/alt/del to Task Manager. The bottom of my screen appears, but no wallpaper, shortcut icons, etc. I disabled the automatic update and it seems to work fine. What could be the problem? I am running Vista.

    Following the advice of a friend who had the same problem, I deleted all my cookies. Surprisingly, this fixed my problem. Thank you very much for your help!

  • Too small display after automatic updates

    Display too small
    After an automatic update of windows, my computer rebooted and all about
    the monitor has shrunk down, including the toolbar, the sidebar, the mouse.
    Internet explore and anything else. I put it to resolutionAny 1208 x 1024
    recommendations for everything back to normal size?
    Thank you

    [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/2518be0a-93f8-4a47-a00e-90773d76c6fa] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows 7 change language after automatic update

    Dear Sir/Madam,

    I had windows 7 Home premium and using the English language page layout. However, he changes Portuguese after automatic update of windows. This is very disturbing, and it happened twice. I have a reinstall the windows the first time and won't do it again. What can I do other than upgrading to ultimate?

    Thank you!

    Kind regards

    Wil

    Take it back to the retailer under your warranty. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Why attached used pps files opened after the latest Automatic update of the ie8?

    Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
    attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
    When I try to open files pps attached, this is what I get.
    a box with a red x will appear and this is the message;
    "this file has no program associated with it for performing this action.
    Create an association in the FOLDER OPTIONS Control Panel."
     
    Before the automatic update, this function worked fine.
    Also, the association for pps files is still there in the Folder Options Control Panel.
    and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
    .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
    .. just one more why people hate automatic updates or updates of any kind.
    like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
    So what's the cure for this annoying problem?
    E-mail address is removed from the privacy *.

    I have XP SP2 and PPS PPViewer 7 NOT VISTA
     
    That's what my watch key

    HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
     
    not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
     
    I also tried renaming it as shown below, and it will not let me NOW WHAT?
     
    where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
     
    Hi wwollmuth,

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    Hi wwollmuth,

    I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

    For. Files PPS (Microsoft PowerPoint slide show)

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

    • After having changed from Show to Open, close the Registry Editor window.

    For. PPT (Microsoft PowerPoint Presentation) files

    • Click Start, type regedit.exe and press ENTER
    • Navigate to the following branch:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

    • Click view , and then click Rename
    • Type the word Open so that the show is replaced with the Open command
    • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

    HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message in Outlook 2003"cannot open this item" after an automatic update of the spam filter Outlook 2003 (KB976882)

    After an automatic update which included KB976882 and restart the computer, I can no longer read the emails in Outlook or in the pane to previow, either by opening the item. Sometimes an error message appears "unable to open this item." Some emails appear to be open, but the view pane is empty (transparent). I suspect that it is related to the update of the junk e-mail filter, but don't know.

    You will find support for MS Outlook in this public discussion group: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.outlook.general

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I had a password lock after a Windows automatic update 14/10/09.

    I restored the system to a point before the updates, and I managed to open a session, but the updates keep installation every time I stop and I have to keep restore to be able to connect. I changed the settings to do not automatically updates, but it keeps the installation anyway, and then it does not recognize my password until I have restore back again before the updates on 10/14. How can I hide the updates or otherwise prevent install?

    Hello

    Control Panel - updated Windows - right click on HIDE - you may have left superiors settings allows you to set
    it to download, but not install if you have a chance to HIDE. Once done, you can set it to auto.
    -------------------------------------------

    You should probably make these institutions.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

    See article below for that.

    You can use this method on the updates that have this problem.
    http://support.Microsoft.com/kb/949358

    Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
    and install it.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.
    Rob - bicycle - Mark Twain said it is good.

  • Disable automatic (countdown) closed after automatic update.

    I run my computer 24/7 and keep programs I need to run all the time. I have automatic updates turned on and off because after the update, it restarts the computer and I lost all the information that I have been woking on. It is extremely irritating and the last time it was the case that I had not saved the data I was working for school and I lost everything. Hours and hours of hard work was gone.

    First of all, I would like to know why Microsoft would think that is a sensable solution just disable someones computer and second, I want to know how to solve this problem. I can't support any option option which will allow updates to download and install, but ask me when it's convenient for me to turn it back on.

    Thank you
    Nate Nate

    Hi Nate2551,

    Sometimes, Windows Update may run in an instance where the file that Windows is trying to update is locked or in use. When this happens, Windows cannot apply the update until it can access these files. So that you can benefit from the update, Windows will ask you to restart your PC to continue the installation of the updates. Windows Update will remind you if you have to restart your PC to continue the installation of an update and you give the option to "reboot now" or will give you the option to postpone the restart. If you are away from your PC for a long period of time, you can see that it automatically restarts your PC. Windows does to make sure all the latest security and other updates are applied in a timely, to help keep your PC safer with little effort for you.
    If you are a system administrator and you want to restart behavior control, you can use Group Policy to prevent reboots automatic situation every time the administrator is connected.

    Access the link below and follow the steps carefully in the article below to configure automatic updates by using Group Policy or of registry settings.

    http://support.Microsoft.com/kb/328010

    For more information on updates, you can access the link below and read the article in the link below.

    http://www.Microsoft.com/Windows/downloads/windowsupdate/FAQ.mspx

    Hope this information was useful.

    Concerning

    Varun j: MICROSOFT SUPPORT

    Visit our Microsoft answers feedback Forum and let us know what you think

  • Stop error c0000135 win vista after automatic update

    family system-vista premium, I just got an automatic update this morning and was invited to restart my computer restart he went as far as the bit of microsoft, then I have now, I get a screen saying blue STOP: C0000135 (can't find the component) this application has failed to start because... then there's a load of letters that do not exist on the keyboard
    they are something like this... "YU, F¬OPYOHYY. DLL was not found. reinstalling the application may fix this problem, which then automatically restart new... it won't do anything else.

    I'm baffalled as to what happened to ideas or help would be great

    see you soon

    Hello

    Try Safe Mode - several times, press F8 that you start.

    Do a restore of the system to a point before that happened

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    ===========================================

    If it is still stuck in Mode safe:

    I guess that part of the question could be a driver which is really old or similar should not be loaded.

    This exit Windows updates on (after you have access) and stop the updates of the driver to load.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ---------------------------------------------------

    You can use the solutions in this KB - 3 methods and I listed a little help for them below

    The update is not installed successfully, you receive a message, and the computer restarts when you try to
    install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    Method 1: Start Windows Vista with the Windows installation media and use the repair feature

    How to do a startup repair in Vista
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    You can also do a safe mode startup repair to access the Recovery Options If you have them available
    or use the DVD as described above.

    This tells you how to access the System Recovery Options
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try recovery options Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    Method 2: Start the system in safe mode and then use the system restore feature

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    You can also do a restore of the system of starting with a Vista disk.

    Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

    See article below for that.

    You can use this method on the updates that have this problem.
    http://support.Microsoft.com/kb/949358

    Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
    and install it.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    ------------------------------------------------------

    Once you are in Windows I was running once again reset here as a precaution.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Hope this helps sort it out for you.

    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for