Automatic update does not complete. is required to create restore point. Windows 7

At the stop, there is notification of updates to install. Windows stops without having to install updates.

Tried to reinstall 7 but had "Windows has encountered an internal error initializing COM.

Have tried all the usual solutions.

Max

Advertisement

Hi max21,.

On your problem of Windows updates, see the following article:

http://support.Microsoft.com/kb/822798

I hope this helps!

Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

Tags: Windows

Similar Questions

  • Automatic update does not work. Unable to load Windows 7 or SP2. Error "cannot find the file specified."

    original title: automatic update does not work. Unable to load Windows 7 or SP2.

    XP Pro, automatic updates do not work.  Unable to load Windows 7 or SP2.  Error on SP @ is "cannot find the specified file.  Tried to load files noted missing for Windows 7, but was not able to load either.  All the other conditions to download files.

    Hello
     

    1. have you downloaded the stand-alone package for the service Pack 2 or are you using Windows update?
    2. you also try to install Windows 7?

    Method 1.
    Run Disk Cleanup and disable the security software and then try to install the same and check.
    See the article below for disk cleanup:
    http://support.Microsoft.com/kb/310312
    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
     
    Method 2.
    If the problem still exists together own starting the computer and attempt to install the service pack.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353
    Note: After that troubleshooting is complete, configure the computer to a normal startup. See the "steps to configure Windows to use a Normal startup state" section in the article above.
     
    Also, it is recommended to install the Windows XP service pack 3. Reference:
    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Automatic update does not work anymore

    My problem is that automatic update does not work anymore and when I try to next turn to the I get some really long file name is missing. I can not down load and reinstall Security Center because it will not only because it is included in Vista. I can't load it updates as the software that is designed to do this does not work. I can't copy and paste the error message due to the fact that I am not given the choice.

    Is enyone knows how to get around this problem.
    The message I get is that Windows does not find:-': {26ee0668-a00a-44d7-9371-beb064c98683}\5\::{36eef7db-88ad-4e81-ad4...     I think that there is more than that, but it does not fit in the window.

    I am running Vista sp1

    Ian Robins, what are the errors that you receive with this procedure? What step gives you access denied? You can attempt to acquire the files listed for a known working machine, but let us try the following:

    It is a simple procedure of rearmament and included are the steps to paste the result of the command prompt, so we read what it gives you:

    1. Click Start and type cmd in the box start the search.
    2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
    3. At the command prompt, type the following command and press ENTER:

    net stop wuauserv

    net stop bits

    net stop cryptsvc

    Ren %systemroot%\System32\Catroot2 Catroot2.old

    net start cryptsvc

    Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

    regsvr32 c:\windows\system32\wuapi.dll

    regsvr32 c:\windows\system32\wuaueng.dll

    regsvr32 c:\windows\system32\wucltux.dll

    regsvr32 wups2.dll

    regsvr32 c:\windows\system32\wups.dll

    regsvr32 c:\windows\system32\wuwebv.dll

    net start bits

    net start wuauserv

    net start Eventlog

    1. Click the icon in the upper left of the window, click on edit, then click on select all, press the Enter key.
    2. By pressing CTRL + V on your keyboard to paste the content in your response.
    3. After a validation or record your response, close the command prompt and restart your computer, and then test Windows Update again.

    Rami
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • service running windows xp sp 3, automatic updates does not show

    company uses wsus, in the previous months, that this pc has patches of security update without problem, now the automatic updates does not appear as a service,

    tried to install wsus client and he tells me it's already installed... help

    Please contact your IT Department for further assistance or system (assuming that's not you).

  • error message 0 x 80240036, automatic, updates does not

    Original title: responsible for recovery CD, including Windows XP SP2 from the Lim after crash; update won't work; error message 0 x 80240036

    Before the accident, I was using SP3 with all updates.  I uninstalled all the anti-virus software.  Automatic Updates does not more.

    Hello

    I would suggest trying the following methods and check if it helps.

    Method 1: Run the Microsoft Fixit tool
    Solve the problem with Microsoft Windows Update is not working: http://support.Microsoft.com/mats/windows_update/

    Method 2:
    You can also try the steps in the link and check if it helps.
    You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
    http://support.Microsoft.com/kb/943144

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows:
    http://support.Microsoft.com/kb/322756/

    Method 3:
    If the problem is not resolved, I suggest you try the procedure described in the link mentioned below.

    You cannot install some programs or updates: http://support.Microsoft.com/kb/822798

    Follow the article below to learn more.

    T-oriented relations on connection errors may occur when you use Windows Update or Microsoft Update
    http://support.Microsoft.com/kb/836941#advmethodC

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  • The service "wuauserv" (automatic updates) does not work correctly

    The service 'wuauserv' uses constantly between 88 and 95% of my CPU, slowing down my computer to the point that it is almost unusable, so I've been suspending or disabling the process 'wuauserv' every time I use my computer.

    In addition, Windows Update does not, if "wuauserv" is suspended or not.
    It prevents just check the latest updates and never stops to do that no matter how long wait.

    Well, I managed to solve the problem.

    I followed the instructions on this page: http://workingscripts.blogspot.com/2008/05/windows-update-high-cpu-usage-fix.html

    Immediately after that, Windows Update and the automatic updates service finally started working again. It has been almost two weeks since I fixed it and have not had a problem since.

    I didn't format the hard drive and do a clean install of Windows XP for this problem - I have never done this because it does not seem necessary.

    And I do not see how this relatively recent automatic updates problem never touched my other problem Installation of Internet Explorer years discussed in my other thread.

  • Automatic update does not. I have to manually go to the Firefox Web page every time.

    Whenever I go to Firefox/subject to check the version, I will be shown what is apparently the latest version and the computer will check for updates, then tell me that Firefox is updated. However, it is never. I still have to go to the Firefox Web page and download the new version of myself. I find this very frustrating, and it happened through a couple of updates to Mac OS x. I'm running Mavericks and just download Firefox 31.

    We see this often reported as past on Mac that update does not work properly, and it maintains the skirmish with the connection or otherwise is not updated.
    We advice you to download and install the full version in this case.

    You can find the full version of the current version of Firefox (31.0) in all languages and for all systems operating here:

  • Automatic update does not-how do you extract the msi file to install push with pstools or pdqdeploy?

    In the past (4 months ago), I managed to check out the Flash Player msi file, this way I could push Setup for all systems. I can't do that, when I try to extract it ask for a password.

    Why is - this has changed? The auto-updater does not work, and Yes, I did install while he autodownloads the new version.

    Any help/ideas would be greatly appreciated.


    Thank you.

    You can get MSI installers through http://www.adobe.com/products/players/flash-player-distribution.html

    It may take a few days to get approval, then waiting for download programs installation directly

  • "update does not apply to your system" error when installing Windows Easy Transfer for Vista 32 bit

    I downloaded and tried to install this update from my 32-bit Vista system and has received a notice of error "update does not apply to your system.

    Hello
     

    In Windows vista and Windows 7, you don't have to download Windows easy transfer.
    Windows easy transfer is incorporated.
    See the links below:
  • How can I get Service Packs, 2 or 3, for XP Pro, if automatic updates does not work?

    I have an Office I just bought 2nd hand for my son who is in grade school, but when I put the automatic updates to run that nothing comes however. Then I tried to install Norton Internet Security and I got an Error Message which said Norton was not able to complete the instalation like Service Pack 2 was not available, so I tried to locate a download of Service Packs 2 and 3 without success, can anyone help me please. As my son is a little off color on the PC does not.

    Say8tan.

    I agree with PA bear "you can't trust the security of ANY computer used until you've formatted the hard drive & then made a clean installation of Windows.  "

    But if you do not want or you cannot perform a clean install and are willing to take the risk of infecting other computers on the home network, read on:-

    To determine which service pack is currently installed on your computer, follow these steps:

    1. Click Startand then click run.
    2. Copy and paste, or type the following command, and then click OK:

    winver

    A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

    See also: http://support.microsoft.com/kb/2497281
    You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

    If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

    How to obtain the latest Windows XP service pack
    http://support.Microsoft.com/kb/322389

    SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
    (for single PCs too)

    For Windows XP Service Pack 2 installation procedure
    http://support.Microsoft.com/kb/875364

    Steps to take before you install Windows XP Service Pack 3
    http://support.Microsoft.com/kb/950717

    It is stated in "How to obtain the latest service pack XP" is.

    If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

    Download the Windows XP Service Pack 3 package now

  • The PRS - T1 firmware update does not complete

    EReader PRS - T1. Now that Sony's Reader store is closed, a new firware update redirects the reader to the Kobo store. Trying to do this update on the drive to fail with the "complete failure" message, tried again, not go. Tried on two different Windows 7 laptop computers and two different readers of PRS - T1. Both the same result. Where from here?

    I solved this problem, it's the latest firmware for the Sony Store closing.

    Sony did a bad job of coding, it does not check the space available on the drive. As the update needs to copy the updated firmware for the drive, the drive must exceed 100 meg free space to enable this. Two of my readers had less space to 100 meg. By removing some books in order to release the update about 110 meg proceeded until the end.

    Sony, get your coders education!

  • Automatic Updates does not work how to operate

    can not get the automatic updates to work, he says to turn on updates, we tried to

    Hi Diana,

    There are not a lot of information in your post, but if it worked before this problem, the most basic troubleshooting tip is to reset Windows Update components manually or use the automated "Fixit" solution provided in the link below.

    How to reset Windows Update components.

    http://support.Microsoft.com/kb/971058

    If the link above does not solve the problem, please provide more information on your system so that we can better help you. For example,.

    1. brand and model of your computer.

    2 installed AV and the current status of the subscription.

    3 OS (XP... ... Vista wndows 7) and the level of service pack (SP1... SP2 or SP3). To check your level of SP, press simultaneously on the of the windows logo key + pause/break key .

    Good luck.

  • function of automatic update does not work. Ran the Fix - it program, shown fixed, but did not.

    Unable to set the automatic update function. He has worked previously.  Also when I search Microsoft Update for updates that are critical or custom, they appear as available but will not download.  I ran utility troubleshooting of Microsoft Fix - it, which indicated the repair was made. But still does not work. Thank you

    Hello

    1. what happens when you try to download the update?

    2 troubleshooting of Microsoft Fix - it are. what tool you referring?

    3 did you change on your computer before the show?

    Follow the following troubleshooting methods:

    Method 1:

    I suggest you perform the steps of troubleshooting links and then check if it solves the problem.

    Cannot install Windows updates

    You cannot install some programs or updates

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: How to back up and restore the registry in Windows XP

    Method 2:

    Reset the Windows Update components, and then check if it solves the problem.

    Follow the steps from the link: How to reset the Windows Update components?

  • I have xp sp3 - automatic update does not

    I have Windows Xp professional Sp3-yesterday my automatic windows update no longer works.  I can access it, but when I press (express) "get updates priority, I get 'the site has encountered a problem and cannot display the page you are trying to show."

    DanielVillarreal06,

    It is usually enough to do this: start > run and type

    Regsvr32.exe c:\windows\system32\wuaueng.dll

    and press the ENTER key. If this does not resolve the issue:

    Start > run and type in these lines. Press the ENTER key after each one:

    net stop wuauserv

    Regsvr32.exe c:\windows\system32\wuapi.dll

    Regsvr32.exe c:\windows\system32\wups.dll

    Regsvr32.exe c:\windows\system32\wuaueng.dll

    Regsvr32.exe c:\windows\system32\dllcache\wucltui.dll

    Regsvr32.exe MSXML3.dll

    Regsvr32.exe qmgr.dll

    Regsvr32.exe qmgrprxy.dll

    net start wuauserv

    Restart Windows, and then go to Windows Update.

    OR

    See if doing a Reset fixes the problem (throwing the difficulty in default and if necessary, aggressive mode), http://support.microsoft.com/kb/971058>

    05/23 / 1108:28: 03:00

  • money from Microsoft automatic updates does not

    I had an earlier version of Microsoft Moneyand automatic stock updates stopped working, could only be done manually.  Recently upgraded to Microsoft Money Sunset and still have the same problem, anyone know a solution? The error message says "no update not complete" and the last call encountered an error.

    Hi Mike,.

    The question you posted would be better suited to the community of money from Microsoft.
    http://social.Microsoft.com/forums/is/category/money

    Hope this information is helpful

Maybe you are looking for


HashFlare