automatically connect to the internet

Similar Questions

• How can I get my computer to automatically connect to the internet whenever I turn it on?

  Connect computer to internet automatically switch on

  How can I get my computer to automatically connect to the internet? Currently, I have to press Fn F1 to activate the WLAN - not something huge, but a tad boring. Another computer on the same network will connect automatically in setting in motion.

  It is a 'feature' of the particular computer you are using. Take a look at the manual; It may be a setting in the BIOS to turn on the wireless on startup.

• Automatic connection to the internet

  I have to manually connect to the internet on my laptop via a wireless router, every time I go online.  He won't have changes settings to connect automatically

  Hello

  Thanks for posting the question. I've surely you will help find a solution on the issue.

  By default, Windows XP attempts to connect to networks without wires in the following order:

  1. Available networks that are in the list of network preferred (by order of registration)
  2. Preferred networks in the list proposed (by order of registration)
  3. Other networks according to selected advanced settings

  Check out these articles and check if that helps:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wireless_networking_overview.mspx?mfr=true

  To connect to an available wireless network

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_connect.mspx?mfr=true

  To set up automatic wireless network configuration

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  5 steps: how to set up your network wireless home

  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx

  Hope this information helps. Please reply with the status so that we can help you.

• Automatic connection to the Internet in Windows 7. Possible or not.

  When I start my computer (using Windows 7) I get a pop up that says connect to internet.  It has a checkbox indicating automatically connect.  Click this check box and then connect.  Next time I'm starting to get the same thing again.  Is it far to automatically connect to Windows 7 without having to click on connect!  Have been able to connect automatically in the latest version of Windows. Have a wired LAN connection, which I'm working on the computer.

  Hello
  Welcome to the Microsoft answers site.

  Who is your Internet service provider?
   
  Yes, it is possible to connect to the Internet automatically in Windows 7.
   
  I suggest you contact your internet service provider to configure settings to connect to the Internet automatically.

  Thank you and best regards,
  Azam - Microsoft technical support.

• Windows 8 will not automatically connect to the internet

  Have a new laptop with Windows 8, and although all of the checkboxes are checked for connection automatic wifi to internet I always have to do it manually.  Reset the computer laptop back to factory settings and started from scratch but still the same problem.

  Has been of any help.

• How to disconnect CC for connection to the internet? FACT DELIVER ALL THE CC SLOW PROGRAMS

  Hello

  Yesterday, I finally brought the CC, but unfortunately I do not have

  could use inside in all it's glory it runs very slowly.

  THIS ISN'T DUE TO A PROBLEM OF MY PC.

  When I ran Adobe Illustrator, it was extremely slow and laggy.

  I suspect it's because of how the CC connects to the internet,

  First of all, I would like to try to make the CC so I extremely slow internet

  stop automatically connect to the internet, because it's more like problem,

  I already turned off file synchronization.
  

  I'm open to other troubleshooting, but this is probably my problem, HOWEVER

  don't tell me trying to close other programs and as my PC is more than capable of

  running several things at once.

  Specifications of the PC:

  •Windows 10 home

  •Gigabyte GA-Z97X-SLI Motherboard

  •GeForce GTX770 4GB

  •Processeur Intel i7-4790 to 3.60 GHz

  •Kingston 16 GB of RAM

  •Cooler Master 700W G series Bronze PSU

  • Kingston SSD 120 GB

  • Seagate 1 TB HARD drive

  •Corsair H100i CPU cooler of water

  UPDATE:

  
  It seemed to have improved speed of the program very much,

  by disconnecting the Internet access through windows firewall.

  If you have any other recommendations to speed up the program

  even more of his personal experience please comment below.

  Thank you

• How can I get firefox to launch automatically on connection to the internet

  I want that firefox will automatically launch when I connect to the internet

  Put a shortcut to Firefox in your Windows startup folder?

• How to stop iPhone to convert to the iMessage automatically when connected to the Internet?

  I have an iPhone, and some of my contacts are saved with iMessage and SMS. Whenever I start a conversation with a contact, it is a conversation of message text (green bubble), but as soon as I try to text the person while I'm connected to the internet, the conversation turns into an iMessage (blue bubble) conversation. I don't want it to do as sometimes the contact cannot be connected to the internet and therefore will not receive a my test up to connect to the Internet. How to make a conversation that began as a conversation of SMS RESTENT a SMS conversation, whereas if I don't want to start a conversation with the same contact iMessage, I manually converted an iMessage conversation?

  Thanks in advance guys.

  You can do that unless you put temporarily out of your data connection (settings-> cellular) or disable iMessage himself.

  But the good news is that you don't have to do either. In settings-> Messages, you will find an option called "send as SMS. If you turned it on and your receiver remains offline for a few minutes, the message will be sent as message text automatically.

  In addition, if you see the iMessage has not been delivered, you can tap and hold the bubble and will give you the ability to send as message text as well.

• After Microsoft automatically installs the updates, I am unable to connect to the Internet.

  After that Windows update installs on my Vista Home Edition, I can't connect to the Internet. (My updates are automatically installed at 03:00)

  If I come back before 03:00 there 12:A.M. as a restore point. I click Restore system to 12 hours and I am able to retrieve Internet Explorer 8.
  However, updates are eliminated and the same updates are reinstalled at 03:00 the next day. Again not Internet Explorer. It lists the 11:00 the previous day as a Restore Point but then lists it as "undo the restore operation. Further, most number of updates is removed. Any help would be greatly appreciated.
  ptfitzy

  Never, EVER use system restore to 'Cancel' an update, Service Pack, or upgrade of IE! Instead, uninstall the update, Service Pack, or the IE patch & reboot. If that does not resolve the problem,then try System Restore.

  Error message after you install an update of Windows Internet Explorer from Windows Update or from Microsoft Update: "cannot display the Web page":
  http://support.Microsoft.com/kb/942818

  If not help to tweak the parameters of your third-party firewall, try the following:

  1. disable your antivirus, all modules of Norton (as applicable), a real-time protection provided by an anti-spyware application (with the exception of Windows Defender; includes the Tea Timer of Spybot, AVG AS guard.exe, SpySweeper guards, etc.), disable the third-party firewall AND THEN select Windows Firewall.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) except #4 below until your antivirus application has been reactivated! If you use a free ZA firewall, you may need to uninstall instead of disable.

  2 Uninstall "A security update Cumulative for Internet Explorer 8 for Vista (KB976325)" or "Security Update for Microsoft Windows (KB976325)" viastart | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update | Installed updates & restart.

  3 d - c #1 above.

  4 manually run Windows Update and install important updates available (i.e. KB976325).

  5 reboot & make sure everything in #1 above is on again and, if necessary, disable the Windows Firewall and enable (or reinstalling) your third-party firewall.

  =====================================

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Unwanted automatic reactivation of the Mode standby mode when it is connected to the Internet

  I have a relatively new home office Pavilion model p6140F, product number NP192AA, version number software 93NAv6PrA2.  Factory installed operating system is Windows Vista Edition Home Premium, 64-bit, Service Pack 2.  I am connected to the internet via a cable modem.  I made energy-saving settings for automatic sleep mode sleep.  Quite often the computer comes out of fashion "sleep" on its own.  What is strange to me, is that when this happens and I click the Start button at bottom left of the screen or any buttons on the Quick Launch bar, nothing happens on the first click.  Only on the second click the computer is what I normally wait until it gets when clicking on the Start button or the quick launch of the first time button.  I tried an experiment by disconnecting the internet cable from the computer modem and the computer behaves as I expect.  He remains in the mode "Eve" from one day to the next day when I unplugged the internet overnight.  It looks like something 'out there' on the internet is somehow take control of the computer, do not let it go in the mode 'sleep' and play with use and function of the 'Start' buttons and the quick launch area.  At the very least, it's embarrassing, if not malicious.  Is occurring with other users?  Wouldn't be some 'normal' functioning of monitoring by HP, Microsoft, providers of security software that I have permission, or is this behavior that should not be expected.  Thanks for any direction on the techniques of 'analysis' on mine could give clues at the origin of this strange behavior.

  Bad Board.  Marking as resolved.

• Unable to connect to the Internet automatically after the restart with Linksys WAG 320n

  We have a problem with Linksys WAG 320n router that after rebooting the router it does not connect to the Internet automatically.

  instead I required to connect manually by clicking on State-> Connect.

  As previously he was showing server status DNS IP addresses, now it does not appear after connecting also.

  "" Could you let me know wheather miss me an option to automatically connect with LAN "' after reboot or anything else the cause.

  Thanks in advance.

  Thanks guys...

  After changing some settings wireless - bandwidth to value 'Standard' and MTU change, its done!

  Finally, the problem has been resolved. Now I can connect automatically when I restart the router and display the DNS IP addresses too.

  Thanks once again for most people trying to help me.

  I have another question and I would like to post separately instead of mention here.

• Whenever I install automatic updates, I can no longer connect to the internet.

  Whenever I install automatic updates, I can no longer connect to the internet. I perform repressive restore, this solves the problem, until the next update. It already has cost me over $ 300 and now I can is more updated windows if I want to keep my internet connection?

  Hi Beverly,.

  Welcome to the Microsoft community!

  After the description looks like after installing the updates you can't access the Internet. We need additional information about this problem. Please answer these questions to help you best:

  1. What antivirus do you use?

  2. what happens when you try to connect to the Internet after installing updates?

  3. the updates are installed on the computer?

  Provide us the details of the update that you have installed.

  For more information, see:

  See the Windows updates are installed

  Method 1:

  After you install the updates, check if you are able to connect to Internet in Mode safe mode with networking.

  Step 1:  Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

  Check out this link to start safe mode:

  Start your computer in safe mode

  More information on:

  Startup options (including safe mode)

  Step 2:  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, followstep 3in the article by putting your computer to normal startup.

  In addition, visit these links and try the steps listed in the link provided and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Hope this helps and provide us more information if you need more assistance.

• Airport utility: green points on the AirPort Extreme & Internet; Mini Mac does not connect to the internet.

  Airport utility shows green points on the AirPort Extreme and the Internet, but my my Mac mini does not connect to the internet. IPhones and 2 portable Windows connect very well, and see all the devices on the home network. The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem. I tried to stop and things start back up as if the installation of the internet for the first time. No joy.

  The airport connects using DHCP in Bridge Mode

  The router address is 192.168.80.1

  Address IPv4 is 192.168.80.2

  DNS server is the same as the router, but grayed out

  Mac Mini IPv4 Address is 192.168.80.3

  IPv6 automatically configures

  Also updated the firmware of the airport; no change.

  ISP guy was friendly but puzzled. He started at the top floor level Tech, so I do not know when I hear back.

  Any ideas to fix?

  Thank you.

  Post edited by: en maschera

  but my my Mac mini does not connect to the internet.

  The problem occurred after that PSI has swapped an ancient for a Comtrend CT5072T DSL modem.

  Hello

  Network preferences may be damaged.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

  Then open AirPort Utility located in HD > Applications > Utilitiies

  Make sure that both Internet and Extreme are green.

  

• My Firefox don't surf the Internet, even though I am connected to the Internet.

  Excuse me, but my Firefox 3.6 just randomly stopped working. It wont let me not browse the Internet more - it still gives me the error message is "Unable to connect", even if I am connected to the Internet. Earlier I open Safari and Internet Explorer 9 - both, in which, allow me to browse the Internet, and I had a complete connection. But, whenever I use Firefox now, it said 'unable to connect '. And whenever I type in a URL on it, Firefox gives me the SAME error message. I don't know what to do now. I uninstalled and reinstalled Firefox and it does the same thing. So now I'm stuck with using Safari, when I really want to use my Firefox. Why would he do that?

  Make sure that you do not appear to work offline in the file menu.

  It is possible that your connection has been interrupted, even briefly, more so if using wireless. Make sure that Firefox is not set on "[v] work offline" in the file menu just above output.

  By default, Firefox 3.5 and 3.6 will automatically use offline mode if there is no network connection. Under certain conditions, after the connection is restored, it can stay in offline mode, without the user's knowledge. Firefox 4 and newer prevents this behavior by default. To prevent this behavior in versions 3.5 and 3.6, add an entry to the topic: config options, as follows.

     * Type about:config in Location (address) bar
     * Right-click on the about:config page to open the right-click context menu and use "New > Boolean" to create a new Boolean preference. Name: network.manage-offline-status. Value: false
  

  http://KB.mozillazine.org/Error_loading_any_website#Work_Offline_Setting