Automatically load the files

Similar Questions

• When you open a new window, it automatically loads the last content pop up (?) and I'm unable to type in the address bar or open a new tab in the new window.

  I don't know if they are technically pop-up windows (for example, if you perform a search on kayak.com, it will automatically open a new window of priceline.com with the search results), but that happens with Blocker on or off. Other examples are a little info to a financial site window or .edu, which opens a session is about to expire, or answer a FAQ (with the exception of the priceline example, these windows have an address bar or view a URL). In any case, once these windows are closed, if I try to open a new window, it will automatically load the content of this "pop-up". Whenever he does, I'm unable to type in the address bar or open a new tab in this window.

  How can I fix it? What I want is to open a new window which is empty, not load the previous contents.

  No, I just realized that I was holding Command-Shift-N rather than command-N

• Automatically loads the page with https

  Firefox will automatically load the following sites using https

  If I type in
  cgets.com

  It automatically goes to https://www.cgets.com

  If I type in
  Google.com

  It automatically goes to https://www.google.com

  Why is this and is at - it a way to stop if to do this?

  Current version of Firefox may prefer a secure connection if you have never used a secure https connection to visit the pages on a Web site.

  Try to set the Boolean browser.urlbar.autoFill false pref on the topic: config page.

  • http://KB.mozillazine.org/about:config

  See 'Prevent Firefox to automatically complete URLs':

  • https://support.Mozilla.org/KB/search-your-bookmarks-history-and-tabs-awesome-bar

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• Cannot load the file MatLab

  Hello

  I am trying to load a MatLab file using DIAdem 2011.  I downloaded the plugin from data from the Web site of NOR and installed.

  When I try to load a *. MAT file I get the following error.

  Unable to load the file "C:\Documents and Settings\All Users\My Documents\SignalExpress Data\08062012_104428_AM\voltage_current_ni_test1.mat" with the charger "MatLab."

  Additional information:
  Impossible to copy a block of data from the file 'C:\Documents and Settings\All my Data\08062012_104428_AM\voltage_current_ni_test1.mat Documents\SignalExpress' in the internal data.

  I never had any other use, by using plugins for DIAdem until I tried to condition a *. MAT file.

  Hi, smooth,

  MatLab use worked very well in the past.  My best guess is that this particular *.mat file may contain some data types (3D arrays, structures, etc.) that are not yet supported.  You have no way to verify what are the types of variables are stored in the *.mat file?  MatLab use works with all other *.mat files you have?

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Automatically read the file next to the folder

  HI I'm reading in the file and the attached vi allows to calculate the area under the curve.  everything works, except that I would like the feature to automatically select the file "next" or "previous file" with out having to reopen the dialogue of the user.  Any help would be greatly appreciated.

  I'm not watching your vi but attached is a way to navigate to the file preceding and following.  You will need to add some range test (if the file is the first or the last in his repertoire).

  Ben64

• whenever I re - start the computer I get this error: could not load the file nta0104.dll.

  "original title: NTA0104.dll.

  whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

  HM

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

  When Im in Lightroom 4 and make an edit in photoshop, after Im done making changes in photoshop that I do a backup, but does not load the file to lightroom. This just started happening. It was working before.

  Please go to the location of your Lightroom Catalog, and there you will see the folder for Lightroom Catalog Previews.Lrdata

• Muse is unable to load the files, only on the main computer

  Hi all

  I wonder if anyone has experienced this before, or has ideas on how to solve this problem.

  Worked on a site yesterday.  Hibernated as usual.

  Have went to use the program today to find that it hangs on the bird's eye view on any Web site file I load.

  No errors, it remains just completely inadmissible and needs to be forced to leave.

  The strange thing is my carry around portable can load the file perfectly (the same exact, located in a network Bank).

  I tried to record a new version of the computer that works.  My main computer crashes again.

  I tried to load the file into the pre-release, always falls down.

  I tried uninstalling the computer.

  Restart the computer.

  Installation.

  Still crashes.

  Tried to move the files locally.

  Still crashes.

  I checked the Windows Update, it did not do anything in this period.

  Am quite perplexed.

  Any suggestions would be greatly appreciated.

  I thought I'd try the system restore in Windows to see if it would help.  Went to restore a file from 2 days ago.

  System restore corrupted my Windows even more and because my main drive was Bitlocker protected, he has me very very grumpy and Windows was over.

  30 minutes of trying to fix, my computer now has a new installation of Windows.

  The good news is that muse is working again.

  TL:Dr: If you have a problem with Muse, wipe your entire computer, it suits him.

• cannot download the updated flash player, says unable to load the file metalife

  try to install the flash player update, said popup cannot load the file metalife.  Should WHA† I do?

  It was the former location of download; Try http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

  If you have any other questions, please ask in the forum Flash Player !

• How to automatically load the variable attributes in an Essbase app?

  Hi gurus,
  
  E.M.P. 11.1.2 Oracle 11 database as repository and staging area, EPMA as tool to update the metadata in the Planning, Essbase and HFM applications.
  
  Question: One of our Essbase cubes, to a dimension of variable attributes (in addition to the scenario and year dimensions).
  What are the tools that we could use to automatically load the dimension?
  I understand that EPMA cannot handle the variable attributes.
  We would like to use the rules of classic schema generation, but I don't know if it works or how to do it.
  
  Any help will be appreciated,
  Thank you
  Daniela

  I think you might be to look Studio if you want to build variable attributes.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Why loadfile() cannot load the file on the web?

  I find loadfile() cannot load the file on the web (it may work to the Director and to the projector). I have try this simple example. Look at this picture:

  

  Very simple, I want to click on the button and the new objects (a pyramid and a sphere) will be added in the 3d scene.

  The scripts of the button are as follows:

  world stage

  on mouseUp me

  scene = member ("3dScene")

  put "scene.state =" & scene.state & RETURN after member ("t_Debug")

  scene.loadfile (the moviePath & "_LimnPanoResS.w3d", false, true)

  end

  To the Director and to the projector, it's OK. This photo is the snapshot of the projector:

  

  But when the files are placed on the web, it will not work. I find loadfile() cannot finish loading. The image of the snapshot is as follows:

  I put the whole movie here:

  http://wrongagain98.7b7b.info/testvr/test2.htm

  Check the status of the 3D Member, and I found that it is always 1. If it's normal, it can become or 4-1.

  Why? I use Director MX 2004.

  Using a packet sniffer, I see that your file please /testvr/_LimnPanoResS.w3d and that this (GET) request returns a 404 error. Are you sure you downloaded the W3D and that IIS has the correct MIME type added?

• automatically load the different files.txt

  Hello

  I have an app that loads a file.txt previously created by a user... When the user lanuch of VI application ask the path of the file to load!

  This user can create various files that configure the various points for his test...

  What I want to do is launch the app and be able to load different files without having to ask the way once again automatically!

  For example, the user create 4 files (point1.txt, point2.txt, point3.txt & point4.txt) my application could support only a single file, but I want to make a loop which allow the user to define the test sequence: point1.txt for 1 minute then point3.txt 2 minutes... etc...

  Thanks for your help

  
  

• How to reboot can I configure Firefox to re - automatically load the tabs I had open when I stopped?

  Every morning when I do a soft start to clear the cobwebs out of my brain of the PC I have my boot settings automatically load 6 apps. Firefox is a. Then I go on a toolbar start tab and click Open all tabs and it loads 4 tabs for me.

  I am trying to automate the loading of the tabs

  I use Firefox 4.0. The previous version was a function that was asked, when you closed Firefox, if you wanted the tabs you have open at that time to arrange the next time you open Firefox.

  It's kind of way to jack-leg to get the tabs open on the re-start, although it was still irritation...

  This issue does not seem has happened in 4.0.

  Is there a setting to always call the question?

  Better yet, is there a setting to always have the tabs / a group of tabs always open at startup?

  Example-in my case I load Vonage Sharefile, then 2 home page tabs.

  This allows me to keep my poor brain organized during the day because I'm multitasking in Firefox and other applications, and telephone and other.

  I thank in advance.

  Kris

  "Example-in my case I load Vonage Sharefile, then 2 home page tabs."

  See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  "The previous version was a function that was asked, when you closed Firefox, if you wanted the tabs you have open at that time to arrange the next time you open Firefox. ...... This issue does not seem has happened in 4.0. ..... Is there a setting to always call the question? "

  One of the changes in Firefox 4: by default Firefox 4 does not display the warning "Save tabs and exit" then to the closure of several tabs, but it can be turned on again by changing some preferences.

  • Record of the tabs was not removed from Firefox 4, but it works a little differently.
    • By default, Firefox 4 will not ask to save tabs, but instead it will always save your tabs in the output. You can restore the next time by selecting "Restore previous Session" in the history menu, or by pressing the button restore Firefox's default homepage.
    • Note: This was a decision by the developers. On this forum, we are all volunteers without compensation here to help other users. Develop them and employees of Mozilla/Firefox rarely, if ever visit here.

  Also, make sure that you do not erase "Browsing history" when you use clear recent history:

  • https://support.Mozilla.com/en-us/KB/clear%20Recent%20History

  To display the message "save tabs and exit" when closing multiple tabs, you can do the following:

  1. Type of topic: config in the URL/address bar and press the Enter key
  2. Accept the warning message (promise to be careful)
  3. Open the preferences/list page
  4. Filter = browser.tabs.warnOnClose
  5. If its value is set to false, double-click top (in the lower panel) to toggle its value to true
  6. Repeat steps 4 and 5 for the 3 following preferences also:
     • browser.warnOnQuit
     • browser.warnOnRestart
     • browser.showQuitWarning
       • Note: last pref is new in Firefox 4 b 12, may need to add (boolean)
       • Info/instructions for the use of topic: config: http://kb.mozillazine.org/About:config
  7. See:
     • https://support.Mozilla.com/en-us/questions/785169
     • http://forums.mozillazine.org/viewtopic.php?f=23 & t = 2105039 & p = 10434467 & sid = fd2a35945bb2c633687f7b50d8c53989
     • http://blog.zpao.com/post/3174360617/about-that-quit-dialog

  You must update the following plugins:

  • Adobe Shockwave for Director Netscape plug-in, version 11.5.9.615
  • Adobe PDF plugin for Firefox and Netscape 10.0.0
  • Shockwave Flash 10.2 r152
  1. Check your plugin versions on one of the following links:
  • http://www.Mozilla.com/en-us/pluginCheck/
  • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
  • Note: plugin check page lacks information about all versions of the plugin
• Update to Shockwave for Director
  • NOTE: this is not the same thing as Shockwave Flash; This installs the Shockwave Player.
  • Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place, so you can find it).
  • When the download is complete, exit Firefox (file > exit)
  • Locate and double-click it in the installer that you just downloaded, let the complete installation.
  • Restart Firefox, and look at your plugins.
  • Download link and more information: http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
• Update of Adobe Reader (PDF plugin):
  • Within your existing Adobe (If you have already installed) drive:
    • Open the Adobe Reader program in your list of programs
    • Click Help > check for updates
    • Follow the instructions to update
    • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
  • Download the full installer (If you have NOT installed Adobe Reader):
    • SAVE the installer to your hard drive (save to your desktop so that you can find it after downloading). Exit/close Firefox. Run the Setup program that you have just downloaded.
    • Use one of the links below:
      • https://support.Mozilla.com/en-us/KB/using+the+Adobe+Reader+plugin+with+Firefox (click on "Install and update of Adobe Reader")
      • See also the download link': http://get.adobe.com/reader/otherversions/
  • After installation, launch Firefox and recheck your version.
• Update the Flash plugin to the latest version.
  • Download and SAVE to your desktop, so you can find the Setup program later
  • If you do not have the current version, click on the "Player Download Center" link on the 'download and information' or 'Download manual installers' below
  • Once the download is complete, exit Firefox
  • Click on the installer, you just download and install
    • Windows 7 and Vista: will need to right click on the installer and choose 'run as administrator '.
  • Launch Firefox and recheck your version or up to the download link below to test the installation
  • Download and information: http://www.adobe.com/software/flash/about/
    • Use Firefox to go to the site above to update the Firefox plugin (will also install the plugin for most other browsers, except IE)
    • Use IE to go to the site above to update the ActiveX to IE
  • Download manual installers.
    • http://kb2.Adobe.com/CPS/191/tn_19166.html#main_ManualInstaller
    • Note the separate links for:
      • Plugin for Firefox and most other browsers
      • ActiveX for IE

• Media player lost all music (but not music videos) and does not load the files in

  Player was working fine, then night emptied all music files and now will load all of the files, but will play them if you transfer to an unsavable playlist

  Hello

  Thanks for posting your query in the Microsoft community!

  I understand that Windows media player has lost all the music. I will try to help you with this question.

  Try these methods and check whether it is resolved:

  Method 1:

  Check the settings of the library in windows media player. Steps to follow:

  i. open Windows media player

  II. click on organize

  III. Select Options, select the Library tab

  IV. in the title of the newsletters of automatic support for files

  v. Select only adds the missing information

  Method 2:

  Rebuild the media database and check if that helps. Follow these steps to rebuild the database:

  i. Click Start, in the search box, type in %LOCALAPPDATA%\Microsoft\Media Player

  II. remove the Media player folder

  III. to restart the computer, the Media player folder will be automatically recreated. Check whether the problem is resolved.

  This problem occurs because the Windows Media Player library database is corrupted.

  Method 3: To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on start, run, type % LOCALAPPDATA%\Microsoft, and then click OK.

  3. Select the Media Player folder, and then click on Delete on the file menu.

  4. restart Windows Media Player.

  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.

  We can't wait to hear back on your part.

• Computer takes forever to load, the files have no icon

  Hello!

  Since yesterday, I have this problem: when I open computer, the green bar at the top starts to load, there are magnifiers on computer, libraries and Favorites in the left pane and nothing appears in the main pane of Solution Explorer. If I manually navigate to any folder by typing the address, it takes me to this folder, but there is no icons for the files or folders. Although, they open as expected, may be renamed etc., but right click on explore crashes. The desktop icons, menu start and see the control panel correctly.

  No recent program has been installed. Before this problem occurred I accessed a suspicious Web page (from a USB key), but...

  I scanned with Malwarebytes, Spybot, ESET, ran ChkDsk, sfc/scannow.

  They have all found nothing except the sfc found 2 corrupt files that could not be repaired.

  Important the fact is that in Safe Mode, I have the same problem!

  Can someone help me on this?

  Screenshots: https://skydrive.live.com/redir?resid=68DDE8B5E2A73B7A! 1908 & authkey =! AF_v7TKydOGoaWM

  Correction, I had a virus, but it wasn't the problem.

  I reinstalled windows and all programs, one by one and that the problem was back, but now I now why! The problem occurred after installing Acronis True Image 2013, because I have disabled its services to run automatically. It seems that Acronis is not like that... and he wants to force me unnecessary services running, most of the time. After you have enabled services, the problem disappeared. :) Good to know!