Automatically update the sequence files (any)

We have a very large number of sequence files that must be updated.  The "Types" have changed.

Is it possible that TestStand (f1 2010) updated all the files in a directory, or if all goes well recursively?

What I am used to doing is to check all the files off our Version control, select about 20 files simultaneously and open them in TestStand, save all, and then close them, then make another game...

Is there a faster way?  (I expect to archive them out of Version control.)

Mike

Take a look at the converter file sequence located in tools > sequence of update files

Tags: NI Software

Similar Questions

  • Disabling update the configuration file without stopping the VI

    I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.

    I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.

    I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.

    Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?

    Thank you very much.

    There is a way to change the module and programmatically updated the IAK file without stopping the VI.  You will need to change the FP read.vi front right by with the constant e/s FieldPoint.  You will need to use the Open FP, FP create Tag, read FP, and close to the public Service.  The trick to this is that you must pre-create files IAK in MAX first.  The way to do is to set up your cart in a configuration and then find devices to MAX.  Then save the iak.  Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak.  You will need to do this for each configuration you have.  Then, you need to place the code below when you want to Ministry the configuration file.  I have also included a screenshot of MAX that you can see what the strings are correlated with.

  • How do you keep Windows automatically passing the entire file name when editing?

    When I copy a file to a folder and rename the file, that I right click once on the file name to select it and again to place the cursor where I want to change the name in the name of the original file.  However, until I'm able to start typing the computer automatically highlights the entire file name, so that when I start typing deletes the original file name and replace it with what I typed.  Is there a way to avoid this and allow me to change the name of original rather than delete it and start from scratch?

    If I press ESC to restore the original name and follow the same steps again, that it allows me to change the name of the original file as you wish.  That is to say, I see only this product the first time I try to change the file name.

    After he highlights the entire name, press any cursor movement: home, end, left arrow, right arrow key.  Who will be development of the United Nations name and allow you to move the cursor in the right place to start to edit. Boulder computer Maven
    Most Microsoft Valuable Professional

  • Is there a way for EA to automatically save the audio files in the project and publish directories & json?

    Is there a way for EA to automatically save the audio files in the project and publish directories & json? Thank you

    Bob

    good edge would not copy all the external files that you have added to your project in the publication of record, you should only do copy paste your files and folders created by your self after publication!

    and I can not undrestand "Unlike you, I'm not that qualified and often make mistakes that make some of my totally useless code retries." You can save your project every time with the new name to have your previews works!

    and on the withdrawal of your symbols that uses the name of the class, you're hurting, you should do it this way

    SYM $(".) Preview"). Remove();

    and that's why you can not make it work

    If tehre is any question feel free to ask me questions

    Zaxist

  • Automatically update the paths?

    Is there a way to set up a Dreamweaver site so when I move an asset (from one folder to another, for example) Dreamweaver automatically updates the associated filepaths?

    Go to Site > Manage Sites.

    Click the Advanced tab.

    Under Info Local, make sure that the Cache: activation of the Cache is checked.

    Dreamweaver should automatically update your file paths whenever you move or change a file.

  • update date and time for 3.6 numbers does not show the time and does not automatically update the date

    The 'update date and time"for numbers of 3.6 does not show the time and does not automatically update the date.  What should I do?  Thank you.

    Hi david,

    where do you find ' update of the date and time.

    Quinn

  • How to let axSequenceView view the sequence file, after the opening before the race.

    How to let axSequenceView view the sequence file, after the opening before the race.

    I would do it differently, you do not see when running because your sequence control is connected to the requeteexecution Manager. I have two controls of the same size that sits on top of the other, one connected to requeteexecution as it is by default and the other to SequenceFileView Manager.

    You can then use reminders to start execution and execution of end events in the user interface to make the control visible. It is very easy to achieve.

  • When I send an e-mail, the system automatically updates the message in my PROJECT folder. This happened last week. How to stop this annoying problem?

    When I send an e-mail, the system automatically updates the message in my PROJECT folder.  This happened last week.  How to stop this annoying problem?

    I use hotmail.  (but is seriously considering moving to something else)

    You need to ask the experts of Hotmail in their forum. I've never used the program.

    Windows Live Solution Center Hotmail Forum
    http://windowslivehelp.com/forums.aspx?ProductID=1

  • Is there a way to connect Windows calendar to a blackberry to automatically update the information?

    Using the calendar with blackberry

    Is there a way to connect Windows calendar to a blackberry to automatically update the information

    See if this helps: http://forums.crackberry.com/blackberry-curve-83xx-f52/sync-windows-calendar-vista-86310/

    According to the forums at http://www.blackberryforums.com/, it is not possible to directly synchronize a Blackberry and Windows Calendar.

  • Hello, I would like to use JavaScript to update the PDF file.  I saw the 'function' 'SearchAndRedactCmd' where can find no information about it. At that moment, I just find information on what it easy as all THE

    Hello, I would like to use JavaScript to update the PDF file.  I saw the 'function' 'SearchAndRedactCmd' where can find no information about it. At that moment, I just find information on what it easy as all THE

    There is no such command in Acrobat JS. Maybe it's the name of an item in menu or function, that someone wrote.

  • Need help updated the VMX file on several Virtual Machine

    All,

    Can anyone help with a problem I'm having?  Here is a brief explanation of what is happening and what we need to solve.

    Recently we found out that we need to add a line in the file VMX of several virtual machines.  In the past, I was able to do this, but would have cold start the virtual machine for the changes to take effect.  Starts cold won't be a problem, because we can program it.

    However, no one knows a way to add this line in the file VMX virtual machines in a cluster.

    Here's the line I need added:

    Devices.hotplug = "false".

    Here is a script that was used earlier (esx 3.0 days) to keep the VM tools updated on reboot.  At this point, if the virtual machine has been turned on, this change could not do through the UI.  However, this script worked to update the .vmx file and then we have cold reboots for the changes to take effect.

    Get-viserver - < Server > - < user > - < password >

    $viview = get-Cluster-name NOMCLUSTER | Get - VM | foreach-object {get-view ($_.ID)}
    $viview | {foreach-object
    $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec
    $vmConfigSpec.Tools = new-Object VMware.Vim.ToolsConfigInfo
    $vmConfigSpec.Tools.afterPowerOn = 'True '.
    $vmConfigSpec.Tools.afterResume = 'True '.
    $vmConfigSpec.Tools.beforeGuestStandby = 'True '.
    $vmConfigSpec.Tools.beforeGuestShutdown = 'True '.
    $vmConfigSpec.Tools.ToolsUpgradePolicy = "UpgradeAtPowerCycle".
    $_. ReconfigVM ($vmConfigSpec)
    }

    The exact script can be found in Disable HotPlug

  • Deleted data file update the control file?

    Hello!

    I deleted a file from data in a tablespace. It was done on purpose because I have no more need. Unfortunately
    I have not updated the database control file, now I get an error message:

    ORA-01157: impossible to identify or to lock the 202 data file - see DBWR trace file
    ORA-01110: data file 202: "D:\ORACLE\PRODUCT\10.2.0\ORADATA\MINOTAUR\TMP_01.DBF."

    How update the control file to get rid of this error?

    I use Windows and exit DB 10.2.0.2.

    Thank you very much for your help!

    Christian

    I think that I made a mistake of reading here.
    Looks like you have deleted a TMP file.

    You then have to join v$ tablespace with v$ tempfile in the statement.

    It's a 10 G (or higher) database?

    Try to drop the tablespace that belongs to this data file, otherwise recreate the controlfile (needs database is offline)

    HTH
    FJFranken

  • I have my windows automatic update. the other day, my windows updated and Ive had problems of e-mail and online video problems. I have vista Home premium OS. any suggestions?

    can receive email, but not able to send after the recent ('important') updates of windows have been installed.
    also can't see videos on facebook because of the mistakes because of these updates.
    I have the my windows update set to automatic and noticed these problems after an update has taken place. I did a system restore and everything worked fine. Needless to say the next day, the same thing. I even went to the windows update to manual setting, and it is always updated by itself. This made 4 consecutive days. now when I go to system restore, I don't even get the opportunity to go beyond 5 days! video errors on facebook tell me that "the video is unavailable" and "video has been deleted or is not visible because of the privacy settings. I also noticed that most installed updates are updates to windows security. and my windows update seems to be popping up constantly telling me ago over updates to install.

    Hi Unhappy72,

    I'm sorry that you are still facing the same problem. I'll be more than happy to help you.

    I have a few questions:

    (a) what version of IE are you using?

    (b) has been going through the steps to reset Internet explorer?

    (c) you have any version of Flash Player on your system?

    You can try to update the version of Flash Player for videos.

    To do this all first you need to uninstall and then go ahead and download the latest version and install it.

    To uninstall the application follow the steps given below:

    1. open programs and features by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features.

    2. Select a program, and then click Uninstall. Some programs include the ability to modify or repair the program in addition to uninstall, but many simply offer the option uninstall. To change a program, click change or repair. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    For more information, please visit the below given link:

    Uninstall or change a program

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    You can also check if the connection parameters are set by default.

    Make follow them the steps below:

    1. open Internet Explorer.

    2. press the Alt key on your keyboard for the file menu if it is not already there.

    3. go to tools, click on Internet Options.

    4. click on the Connections tab.

    5. at the bottom of the page, it will be a local network settings tab, click on this.

    6. check if automatic detect settings is enabled in the box, if it isn't what to choose.

    7. close all Internet Explorer Windows and reopen and check if the problem persists.

    This should solve your problem of not being able to send emails.

    You can also try to clean boot your system and then try to play the videos. This will let us know if the background services interferes with the proper functioning of your system.

    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    The steps to perform a clean boot are given below:

    1 log on to the computer using an account with administrator rights

    2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue

    3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

    4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

    Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

    Once you have disabled all services that you can check if you are able to play the videos. If so, you can try the divide and conquer method to find what service exactly the origin of the problem. For those who follow the below given link:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start, type msconfig.exe in the start search box and press ENTER.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    2. on the general tab, click the Normal startup option, and then click OK.

    3. When you are prompted to restart the computer, click on restart

    Alternatively, you can try to disable the modules such that some add-ons can be a problem while browsing through the internet.

    To disable the modules follow the below given steps:

    1. click on the Start button, click principally made programs, on Accessories, click System Toolsand then click Internet Explorer (No Add-ons).

    For more information on the modules, please visit the below given link:

    Internet Explorer Add-ons: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Add-ons-frequently-asked-questions

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Shared folder, Windows 7 does not automatically update the files as they are deleted or modified.

    original title: data network of Windows 7 problem

    My problem is with all the means to modify data on my network with windows 7.

    The problem is the following:

    * 4 xp pc

    * 2 win7 (1 pro x 32 & 1 x 64 pro)

    * 1 pc xp with my files in a shared folder.

    all on the same network.

    all PCs can access the folder of sparkle. I have traced the folder on the xp pc 4 and 2 win7 pro pc without problems.

    Now, if I delete one of the files on the xp pc, or with one of the other networked xp pc, I can see the file disappeared on all xp pc and or if I make changes on my file as an excel file, I can see the changes on all xp pc.

    Now if I delete or make changes on my files with my pc xp, my pc win 7 does not show that I deleted files or changed anything.

    still, it shows the deleted files and can even open with all the deleted data still intact.

    I deleted the drive on the pc win 7 and consulted mapping data by accessing the location on the network and still have the same problem.

    It's like winning 7 pads files or something.

    Offline files is not enabled, or synchronized.

    I hope someone can help me.

    This problem has occurred to some of my PC too, after trying all the solutions non-utile so-called, ms professional here is how I solved it, click on the menu of the sar, right-click on Documents, remove all library locations, tried and it has not always worked, restored the locations by DEFAULT, it still didn't WORK , has ADDED ONE MORE, now, everything worked well, after this step i took just the location I had added (not by default) and it still works very well.

    This error has nothing to do with third-party software, but it has everything to do with the "libraries" functionality", the reason for this statement is because if I go to computer\c\users\myuser\my documents\
    everything works fine, but if I go to the start menu--> documents (which uses the library feature), then it has failed.
    Just so removing and adding a few ocntent library solved the problem.

  • Is it possible to automatically update the tools of Toshiba?

    Hello

    Maybe I missed it, but I have found no tool automatic update of a dozen programs that were pre-installed with the laptop. There are two problems with this:

    1. There is no easy way to check the currently installed version
    2. There are many programs

    Maybe I'm too lazy, under Fedora just type 'yum update' or something similar and each package supplied with the system is up-to-date. I'm not demanding this for software I have installed on my own, first because I don't know what version I have installed, and second, I know where to find the updates.

    But if you are shipping a ton of craplets with the system, it would be good to update these as painless as possible.

    See you soon.

    Hi Julian

    I understand your point of view very well, but can I ask why you want you to update all applications of hell?
    You have problems?

    Of course, Toshiba offer many applications for several features but I put t see any reasons for updates, if everything works.

    But you still need to update the Windows operating system. It's true.
    Windows provide an option for automatically updated and everything works automatically

Maybe you are looking for