Automator - using variables in applescript do script
How can I insert a variable in 'doing the script' in AppleScript? I want repoName be what is the variable.
the term {parameters}
Tell application "Terminal".
activate
Set currentTab to script ("ssh [email protected];")
delay of 6
do script (' cd... /.. ") ("/ var/www ') in currentTab
delay of 6
RepoName text set
make the script currentTab ('sudo mkdir $repoName")
tell the end
end of race
Figured it out:
the term {parameters}
Tell application "Terminal".
activate
Set currentTab to script ("ssh [email protected];")
delay 3
do script (' cd... /.. ") ("/ var/www ') in currentTab
delay 3
Define repoName (enter text)
do script ('sudo mkdir") & repoName in currentTab
tell the end
end of race
The key is the & symbol, which concatenates.
Tags: iOS Developer
Similar Questions
-
You can use variable substitution in the Calc script.
Hi guys,.
I want to use variable substitution in the calculation script. I v_SECSUBAREA that my substitution variable and its value would be like C12.00 or C13.00 or C12.00, C13.00.
But it gives me error mentioned below by checking the syntax of the calculation script.
Error: parsing formula [statement of DIFFICULTY] (line 15) 1200315 error: invalid object type
Calculation script:
-----------------------------
FIX (& v_CLEARYEAR, & v_CLEARMON)
FIX (& v_SECSUBAREA)
DIFFICULTY ('REPGBP', 'REPEUR', 'REPUSD', 'local', @DESCENDANTS ("DIVISION"), @LIST(&v_SECDNBENTITY), @DESCENDANTS ("SubAnalysis"),
@DESCENDANTS ("RTNROW"), @DESCENDANTS ("RTNCOL"))
CLEARDATA "RESUB."
ENDFIX;
ENDFIX;
ENDFIX;
Variable substitution:
----------------------------------
PRC COR_ALL v_SECSUBAREA C12.00 Calculation script does not have C12.00 as the value for the variable substitution. If I give FY15 then Script gives me a correct syntax.
Please help me to get this resolved.
Thank you
Shruti
Hello
Assuming that you calculate in the PRC. Database COR_ALL.
You may set the C12.00 value in quotes like "C12.00".
Kind regards
Philip Hulsebosch.
-
The use of variables in the Calc scripts and business rules
I'm sure that there have been previous discussions on this topic, but can anyone let me know the benefits of using variables in scripts of Calc and BRs?
Thank you
AI've never used variable Calc and after reading a guide to the study, which has talked about them, I didn't really understand the benefits.
^ ^ ^ I use variables all the time to make difficult abstract formulas. Here is an example.
/* Declare variables */ VAR varSalaryCosts ; VAR varProdOHLabXXXX ; VAR varXXXX ; A whole bunch of code here along with very limited FIX statement and then... "Salaried Labor" ( varSalaryCosts = "Salary Costs"->"No Department"->"No Category"->"Salaried" - "Wage Bonus"->"No Department"->"No Category"->"Salaried" - "YYYY Retention Bonus 40%"->"No Department"->"No Category"->"Salaried" - "YYYY 60% Ret Bonus Accrual"->"No Department"->"No Category"->"Salaried" ; varProdOHLabXXXX = "Number of Employees"->"ZZZZDepartments"->"Codes"->"Salaried" + "Number of Employees"->"Blah Departments"->"Codes"->"Salaried" + "Number of Employees"->"Humph Departments"->"Codes"->"Salaried" + "Number of Employees"->"TTTT"->"Codes"->"Salaried" ; "Salaried Labor" = varSalaryCosts * ("Number of Employees"->"Salaried" / varProdOHLabXXXX) ; )
The last formula is how the formula was described to me by the owner of the company. I find it much easier to read something like:
"Salaried Labor" = ("Salary Costs"->"No Department"->"No Category"->"Salaried" - "Wage Bonus"->"No Department"->"No Category"->"Salaried" - "YYYY Retention Bonus 40%"->"No Department"->"No Category"->"Salaried" - "YYYY 60% Ret Bonus Accrual"->"No Department"->"No Category"->"Salaried") * ("Number of Employees"->"Salaried" / ("Number of Employees"->"ZZZZDepartments"->"Codes"->"Salaried" + "Number of Employees"->"Blah Departments"->"Codes"->"Salaried" + "Number of Employees"->"Humph Departments"->"Codes"->"Salaried" + "Number of Employees"->"TTTT"->"Codes"->"Salaried")) ;
I used the TABLE in a calc script really-cool-but-alas-not-invented-by-me do better than planning made the conversion of currency currency conversion in planning. (How's that for a run-on sentence?) It is one of the six blog posts that I'm trying and I will end it soon, I hope. I am now thrash mode. It doesn't have its uses and I'll try to remember to update this thread when I'm done.
Kind regards
Cameron Lackpour
-
help the guitar hero automated using labview
Hi, Im working on my final project for a class e and Im making a guitar hero automated using labVIEW and vision builder. I already have all the buttons and the strum bar, but I need help with the whammy bar. My problem is that it should only work on the notes which take more time with a single click, I think I should add some time delay (or something like that) so if the camera sees the note more times the amount of time its will send a signal to the solenoid to continue to press the whammy in intermittent form bar (I think I need a square to wave this) part).
I'd really appreciate if someone can help me or show me an example implementation of the part.
Here is a video of a similar project without the whammy bar
Edit: Im using a NOR-cDAQ 9472 module for output on a digital OR cDAQ 9171 chasis USB
Thank you
Javier Morales
Dear Javier,
It sounds like a cool project work.
Why not try wiring of the output of the shared in a shift register variable to retain the previous values and compare the old with the new value using a door and. You can connect to a wait function in your loop and wire abour 100ms, normal human reaction time, while is the button held for two cycles this triggers your whammy bar.
I hope this helps.
Kind regards
-
Replacement variable in the MDX script.
Hello
Any body explain how to use substitution variables in the MDX Script.
here a single case:
IF (@ISMBR (& next) OR @ISMBR (& NextYear2))
'Budget NY'-'Budget '.
ENDIF;
Thanks in advance
CG ReddyTry this one
When case ([Time]. CurrentMember) is & next or ([Time]. CurrentMember) is & NextYear2
then
[Budget NY]-[Budget]
endKind regards
RSG -
By using the sign $ on MaxL scripts
Hi all
How to use the sign $ on MaxL scripts work? I've seen scripts that $ sign was used instead of user name, password, server name, etc. What are the benefits of its use and how can it be implemented?
Thanks in advance.
AThese are positional variables that are passed to the script for the origination bat file (or a shell script for unix). For example, if you have in your script
Login $1 $ 2 $3;Your calling batch file would be \Essmsh
myMaxLFile admin password localghostThe admin would be password $1 $ 2 and localhost $3, you can have more variables there you like.
-
Using variables in a procedure
Hello experts,
I am new in odi, but did very well but I'm not reached to use variables ate a bunch of odi.
Let me explain the problem:
(1) I create three variables non-persistent to odi that retrieves the value of a sql statement select, like this, for example:
Select '< % odiRef.getPrevStepLog ("SESSION_NO") = >' FROM DUAL; (Variable name-SESS_NO)
Select '< % odiRef.getPOP ("POP_NAME") = >' FROM DUAL; (Variable name-INTER_NAME)
Select '< % odiRef.getPrevStepLog ("STATUS") = >' FROM DUAL; (Variable name-FLAG_STA)
...
(2) then I create an odi procedure that insert values into a table of newspaper: insert into < table_name > values ('#SESS_NO', 'INTER_NAME', '#FLAG_STA')
(3) then I create a package that has the following:
Interface (success)-> procedure (with the insert statement)
The question is, where do I put the variables? Everywhere where I put them, the operator gives me an error message which, during the execution of the insert statement, indicate that the variable has no value. I'm trying to insert then before the intervention, (Interface (success)-> var1 (success)-> Var2 (success)-> Var3 (success)-> procedure (with the insert statement)), but they, of course, an error because the previous step of the var1 var2, where should be the interface.
I'm trying to create a scenario (new package) with the variables and the main package becomes like this:
(Interface (success)-> script (new package) (success)-> procedure (with the insert statement)
But the error still occurs, and no value is assigned to the variables.
Any help will be appreciated gratefully.
Thanks in advance,
Daniel huh
Published by: user10470648 on November 10, 2008 04:11Hi Daniel,.
Sorry for my delay to answer you...
To solve the problems...
(1) OK
(2) you must repeat the "refresh state variable' running after each interface or the procedure. It is possible to paralallel the execution but it's a different architecture.
(3) on the variables, simply drag and drop it to the package and leave it as declaring type. This wll allow you, after creating a scenario, use these variables as stamped.
I'll send you an ODI paper on how to use it (in replay to the email you sent me)
This help you?
Published by: Cezar Santos on 11/12/2008 11:34
-
Hi all
I am new to TestStand. Still in the learning process.
What are the parameters? How are Variables differenet? Why we can not use variables to pass data to one sequnece to another? What is the advantage to use parameters instead of Variables?
Thanks in advance,
LaVIEWan
I'm sorry... I discovered that... its not at all possible to pass data to another sequence using variables... it must be through settings... once again I apologize for the display of such a stupid question
-
Impossible to use variables shared when deploying an exe file
I tried to use variables shared for some time. I have been all over the forums and still have had no luck. I can get these VI to work until I have install on another PC while they do any work. I don't know what I'm doing wrong. I forced libraries to deploy, but they still do not work on the machine, that I install the exe file. I don't think that libraries are being installed. I can't see in the Distributed System Manager. I can see libraries on other machines, but not on the one that I have.
Have you included libraries in section always included the source files. You did, and then change the destination of the library of media files on the Source code file settings tab?
In the code are you using the correct path when calling the libraries deployment method. Current path of the VI should be stripped twice and have "data\name.lvlib" built in the end.
-
can I use waiting fuction in java script with qml
HII guyzz... How to use the wait in java script with QML function as if it takes 20 minutes to perform a specific operation or a process after that battery is 100%
You are better off using QTimer for something like that.
-
Using variables on localization files
Hi all!
I would like to know if it is possible to use variables on the HR files, so they could be replaced by a dynamic text while the application is running.
My point is, I need to post this message on an alert:
"Hi Carlos, the pleasure of you review", "Carlos" is the user name and of course it's different for each installation.
Must be something like this:
key: GREETINGS_MSG
value: Hi %s, the pleasure to see you
And then.
Dialog.Alert (_res.getString (GREETINGS_MSG, "Carlos").
So, is it possible to do this?
Thank you!
According to what you're asking, it's what I found.
See if you can try this:
http://www.BlackBerry.com/developers/docs/5.0.0api/NET/rim/device/API/i18n/MessageFormat.html
http://Java.Sun.com/J2SE/1.3/docs/API/Java/text/MessageFormat.html
Example:
Object[] arguments = { new Integer(7), new Date(System.currentTimeMillis()), "a disturbance in the Force" }; String result = MessageFormat.format( "At {1,time} on {1,date}, there was {2} on planet {0,number,integer}.", arguments);
-
How to get the variable 'dn' in a script
Hello
I have a problem, get the variable "dn" of the script is not a "public" variable, but I'm able to see in the log file. I bet it's in an object java somewhere - I don't know how to access it. No one knows how to get it. I have attached some of the newspaper:)
CN = 8485 [5-6] XX, dn = 8485601 = 9812 cgn, ani = null, dnis = null, clid = null, atype = FORWARD_ALL lrd = 9817, ocn = 9817,
I have a similar problem but I did not find the repo. package... Where?
Thank you
-
Using variables such as table names. Ideas for alternative designs
Hello
I am the design of an application that uses synonyms to pull information from the 'client' DBs via links from DB. Synonyms are created with a DB_ID in name (example: CUSTOMER_100, CUSTOMER_200... where the 100 and 200 are DB IDs of 2 separate DBs customer.)
I have a procedure that selects data in the synonym based on what DB_ID is passed to the procedure. I want to be able to perform this procedure for any entered DB_ID. I know now I can't use variable for the table names names and using EXECUTE IMMEDIATE does not seem suitable for what I'm trying to do.
Does anyone have suggestions or re-design options, I could use to achieve this generic procedure which will select a certain synonym based on the information of DB input parameters? Thank you.
CREATE or REPLACE PROCEDURE CUSTOMER_TEST (p_host IN VARCHAR2, p_db_name IN VARCHAR2, p_schema in VARCHAR)
IS
v_hostname VARCHAR2 (50): = UPPER (p_host);
v_instance VARCHAR2 (50): = UPPER (p_db_name);
v_schema VARCHAR2 (50): = UPPER (p_schema);
v_db_id NUMBER;
v_synonym VARCHAR2 (50);
CURSOR insert_customer
IS
SELECT
c.customer_fname,
c.customer_lname
OF v_synonym_name c;
BEGIN
-MADE BASED ON INPUT PARAMETERS DB_ID
Select d.db_id
in v_db_id
of t_mv_db_accounts ac.
t_mv_db_instances I,.
t_mv_dbs d,
t_mv_hosts h
where ac.db_ID = d.db_ID
and i.db_ID = d.db_ID
and i.HOST_ID = h.host_id
and upper (H.HOST_NAME) = v_hostname
and upper (D.DB_NAME) = v_instance
and upper (Ac.ACCOUNT_NAME) = v_schema;
-ADD DB_ID TO NAME SYNOYNM
v_synonym: = 'CUSTOMER_ | v_db_id;
FOR cust_rec IN insert_customer
LOOP
INSERT INTO CUSTOMER_RESULTS (First_Name, Last_Name)
VALUES (cust_rec.customer_fname, cust_rec.customer_lname);
END LOOP;
COMMIT;
END;
/
RGS,
Rob
EXECUTE IMMEDIATE ' INSERT IN CUSTOMER_RESULTS (First_Name, Last_Name) SELECT customer_fname, customer_lname FROM ' | v_synonym;
-
Is it possible to save an action to convert from sRGB to CMYK, then use the action in a script to support the process of a folder full of images?
Do action, and run as a batch of PS (file > Automate > batch), or bridge (Tools > Photoshop > batch).
Pay special attention to all the 'destination', 'save' and 'close' steps. You want to save a copy without overwriting the original, which can easily happen.
-
How can I use variable presentation logic SQL
Hi Experts,
How can I use variable SQL logical presentation. I need the exact syntax. Kindly help me to achieve this goal.
"Time". "" Date "between the Date of 2014 '-1-17 'and Date' ' 2014-2-16
Thanks in advance
Asim
It's done... We can use it in the logical query with the same syntax where we use in converting this filter as SQL...
Maybe you are looking for
-
My FireFox became unable to sign into Hotmail
When I try to go to http://www.hotmail.com/ he sends me to the URL of the offending site mentioned below. Normally indicated the premises user name and password, but this last time, he just didn't!The strange point is that it works OK when you use Go
-
T420 driver windows problem 10
Hello I have ThinkPad T420. Could someone help to find the drivers for these devics: (1) USB\VID_0BDB & PID_1911 & REV_0000 (2) VEN_1180 & DEV_E823 & SUBSYS_21CE17AA & REV_05 PCI (3) PCI VEN_8086 & DEV_1C3D & SUBSYS_21CE17AA & REV_04 I just upgraded
-
I'm new with daisylab and I want to make calculations of iemg with signals saved previously. (1) I want to resample a signal of 3000 Hz to 1000 Hz What is the equivalent of the help (matlab) daisy lab avarage, window or other function? (2) how can I
-
I asked program written by Labview 6.1 and I want to update to run on Labview 2009. is there someone to help me?
-
Pavilion g102: adding memory access
I bought an additional memory module to add a new machine, but how do I add it? What I really need to remove the cover from the bottom (20 screws)? Seems a bit excessive. Any ideas where I can find a service manual? T I A Steve