Autonomous phone firmware update

Similar Questions

• The IP Phone Firmware update

  We have CUCM 7.1.3 and wanted to know if we can upgrade our IP Phone 7975 G with the new firmware SCCP75.9 - 3-1 SR 4 - 1 s or do we need to have license for this?

  You can try to install above mentioned on 7975 IP phones firmware since reports README files for support of other upgarde with 9.2 (3).

  regds,

  Aman

• New Firmware Update - where is the change log?

  I see that a firmware update was sent to my phone. However I can't find a change log. Where is it?

  Hello!

  HP and Microsoft has released an update (online) of the OTA for the X 3 elite on October 25, 2016. The update installs Windows Mobile 10 for the following versions:

  Firmware revision: 0002.0000.0014.0100

  Build of the OS: 10.0.14393.321

  Bootloader Version: 520101

  New features:

  Area	Description
  Display	High brightness Mode is activated when the brightness adjustment is suggested by default.
  Security	Reset functionality is enabled. However, the existing user must reflash phone with this software with Windows Device Recovery Tool (WDRT).

  The issues addressed (Items with * are fixed by OS updates):

  Area	Description
  Apps	App Instagram, have green lines during use is fixed.
  	Launch of view inconsistent HP on docking tools is fixed.
  Audio	Detection of the helmet is not reliable is fixed.
  Camera	Auto focus performance and stability in low light conditions are improved.
  	Model tapes preview screen is fixed.
  	Video recording after that tap put in pause/resume many times received message 'something went wrong' is fixed.
  Security	Blue BitLocker Recovery screen on reboot with active device encryption is fixed.
  User interface	Tap to wake up the wrong feature turn off screen is fixed.
  Hello Windows	IRIS is unblock, followed by sweeping to unlock quickly led to the prompt error is fixed.
  	Fingerprints and Iris being setup one after the other, one of them will not functional, is fixed. **

  Known issues:

  Area	Description
  Apps	Skype for business app can be run from external display of Continuum.
  Connectivity	Dock desktop LAN port of HP has no configuration of the user interface.
  User interface	Missing tiles with update settings. The user can go to the list of applications, press the settings icon and select PIN to start restoring the tile.
  	Tile 2 Messaging becomes white with update. Touch on the tile once it restores.
  Security	Too many failed unlock attempts, the device will be blocked for security reasons. User can unlock the unit to https://account.microsoft.com/devices.

  Thank you

• 277dw Lasetjet MFP: Firmware Update for my Laserjet MFP 277dw

  This morning my printer has informed me of an update of the firmware, which naturally installed. The printer print is no longer because I have 3 party laser cartridges.  I had heard of tactics HP injet printers, but never thought that they would stoop so low just to force me to buy their cartridges, which for color laserjet, is very expensive.

  I currently have the following HP hardware:

  1. High-end ENVY Phoenix 850-065se Desktop (i7-5960 x)
  2. New portable high-end OMEN
  3. 277dw LaseJet MFP
  4. Chromebook 11

  I am also a partner HP started.

  How much chance do you think it is I will NEVER buy HP hardware again?

  If you use laser 3 rd-party cartridges, do NOT have the HP firmware updates.

  Find another thread to the M277 that seems to relate to yours:

  http://h30434.www3.HP.com/T5/LaserJet-printing/M277DW-supply-memory-error-all-cartridges/m-p/5766705/highlight/true#M294371

  The solution by the user in this one suggests a bad patch as opposed to a deliberate attempt by HP, third block laser cartridges.  It is more credible to me than what HP did with the OfficeJets.  He fixed in downgrading the firmware that atleast confirms that the problem is associated with firmware.

  I commented on another M252 thread on a similar power error message:

  http://h30434.www3.HP.com/T5/LaserJet-printing/how-to-revert-fix-recent-firmware-update-for-HP-colour/m-p/5809720#M297289

  I think its time to crush us this one and get a comment from HP support directly.  If you would be so kind as to contact HP directly through Chat or by phone, we can get an official and timely response.  Then share what you said with the rest of us.  The community can get the word out from there.

  I also found another thread dig deeper and providing a link to an old version of firmware, if you want to try it yourself:

  http://h30434.www3.HP.com/T5/LaserJet-printing/M277DW-supply-memory-error/m-p/5760229/highlight/true#M293984

• HP zBook Studio G3: zBook Studio G3 - DEATH BY INTEL ME FIRMWARE UPDATE

  WARNING!

  DO NOT INSTALL THE UPDATE OF THE COMPONENT OF THE (COMPANY) INTEL MANAGEMENT ENGINE FIRMWARE!

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8934841 & swItemId = ob_159465_1 & swEnvOid = 419...

  Component Firmware Intel management engine (ME) (American International)

  11.0.0.1194 Rev.A
  December 1, 2015

  We bought 5 of these laptops for our Engineering Department and I was against a tight schedule to get them deployed (the next day). I started working on obtaining a set of installation with the necessary software and then I just want to clone one for the other 5.

  I did a clean install of Windows 10 and installed all the drivers from the HP site. Then I ran Windows updates until everything is up-to-date. I disabled Windows Defender. Now all that remained was update the firmware BIOS, Intel ME and Thunderbolt using the downloaded utilities since the page drivers. The BIOS installed fine, but it's a really weird update process. Due to the beeps and lights blink during his work. There is no progress bar to let you know if she is doing anything. At some point, as the beeping stop but it's still really work. Then he starts and updates another part of the system and so on. Anyway, that everything worked fine. No problem with the update and Windows 10.

  So I ran the update of the Firmware of Thunderbolt and open up a command window saying that it couldn't find the controller. It looks like not there nothing after that point and just closed.

  Finally, I ran the Intel Management Engine firmware update utility. He opens a command window and says that it is loading the file and check and so on. Then he wrote the Flash file and takes a minute or two, doing so. Once it's done, the firm order window and back to business as usual... until you restart. Once you do this, the system is toast. It does not start. Black screen, fans run at high speed and the CapsLock and NumLock bulbs only 5 slow flashes indicating that there is something wrong with the motherboard. I'm starting a supported by HP chat session.

  I am told to disconnect the battery. To access the battery, you need a bit T - 8 Torx and you unscrew 11 screws to remove the grill cover and low fan (pedestal). I did that and disconnected from the battery. Reconnect after a few minutes and tried to start. Nothing, same thing. The support agent told me that a technician on site should be sent to replace the motherboard.

  While the lower lid has been opened, I noticed that there are two small LED lights near the SSD. There are supposed to be the diagnostic lights and I found an article in the service manual indicates if one of the LEDs is lit, the motherboard should be replaced. This lights a few seconds after the connection of the power supply for the laptop or by pressing the power button.

  I asked the support agent if they knew why it happened, but they did not know.

  So, I got 4 portable more to work with. I took off the dead laptop SSD and put a charge in a brand new out of the box. Started by and on the desktop Windows 10. This laptop had BIOS v1.03 on this subject so I ran the BIOS updated and rebooted. All right. At this stage I myself asked to perform other upgrades of the firmware or not. I thought that I had a 50/50 chance and I'm the kind of person that simply be whether it was a fluke or if there really was something seriously wrong with the update of the Intel ME firmware. He ran while first instead of love at first sight to date. Update Intel did ME the same thing before, opened a window to order, checked and then flashed... and after a reboot I got another laptop dead.

  At this point, I shook my head and frowned, looking at the HP logo.

  I tried calling support, but their laptop zbook/computer service has been closed from 10 is no support by phone or chat support. I have to wait until the morning to make a call in warranty for this second laptop dead.

  The Intel ME firmware update released on download of HP ZBook Studio G3 section was not compatible with these laptops and caused the laptop no longer starts. Only an exchange of motherboard could solve the problem. HP since then changed the link to the Intel ME firmware update for the appropriate softpaq.
  
  Those who had run the update of the bad firmware and their laptop brick had to call the HP technical support to schedule a replacement motherboard on the spot.

• N300 WIRELESS ROUTER FIRMWARE UPDATE E-MAIL HOAX?

  I just got the am hesitant to click on one of the links, wary that this could be a scam email below. My main reason being that he says they are trying to fix a problem of firmware critical but the "firmware" is misspelled where the link is on the installation instructions, that is, "actual." I don't want to download anything that may harm my computer, and you will pay Netgear technical support by phone.

  Thank you. -Lisa

  N300 Router Firmware update

  Dear customer, Us comes new firmware for the wireless N300 router (WNR2000v4) a critical problem indicated by the power being continuously lit LED amber. We recommend that you only install the update now. This Web site was updated (v.58 or higher): http://support.NETGEAR.com/product/WNR2000v4 Actual installation instructions: http://kb.netgear.com/app/answers/detail/a_id/23442 Learn more about the problem solved here: http://KB.NETGEAR.com/app/answers/detail/A_ID/27477 Thank you The NETGEAR team

  I received the same mail only a few minutes ago and click on the Web to verify its content, which is how I found this thread.

  Then I searched the Netgear site and found this page which describes how to enter the Web page of your router and check for any firmware (or the actual, since even business communications with typos sometimes escape in nature) updates for the router:

  Page Title: Install the latest firmware on a NETGEAR router

  URL: http://kb.netgear.com/app/answers/detail/a_id/23442

  --

  MK

• SOLVED: Slow wireless internet passthrough after firmware update

  If I first bought a Nighthawk in July 2014 and it was great for a while. Then in the notice happened a few months my streaming services are jumping and more than usual buffering (which was almost never with the Nighthawk).

  I have a connection of 110Mbps (Comcast and through a SB6141 modem), but all of a sudden was only getting 10 Mbps (or less) passthrough on 5 G wireless band (at the beginning of the speed test would sometimes up to 50 Mbit/s, but on a few seconds would fall to nothing..)

  Cable speeds were very good. Always 110Mbps +. Tried several different channels and factory reset the router, wireless speed was still slow. Connected to the Netgear website and submitted a support ticket within 2 hours they sent me with an RMA number and the next day a new unit has been FedEx would be for me. Support rep Tech says it's a problem of material known in some units... I was super impressed with the customer service, it was seriously a no replacement of hassles that took every 15 minutes of my time.

  EXCEPT when I got the replacement router in the next few days, he had the SAME PROBLEM. As soon as the new router is on and I'm connected, I've upgraded to the latest version of the firmware, done a factory reset and down Speedtest. And I had the same problem: speed internet passthrough on all my wireless devices has been terrible. Less than 10 Mbps when I have a connection 110 + Mbps. (Wired speeds were great, it was not a problem of modem or provider).

  Again contacted support and they asked me to download the latest firmware on laptop and upgrade the router manually, do a factory reset before and after the upgrade. They also told me to try to disable WMM (made no difference speed passthrough, but lower my laptop connection between 433Mbps to 54Mbps speed!).

  I tried this... still slow passthough wireless speed.

  The only thing that has changed since I first got a Nighthawk in July 2014 (and I've run speedtests then and had a speed 110 wireless + Mbit/s at the time), is that the firmware has updated several times... makes me think...

  I downloaded the Netgear support the past 5 versions of the firmware for the Nighthawk. http://downloadcenter.netgear.com/en/product/R7000#sear...

  I then manually downgraded the Nighthawk to each previous version (do a factory reset before and after each installation) and ran Speedtest every time. Once I have got down to the R7000 Version - V1.0.3.24_1.1.20 (released 12/02/14) and ran a Speedtest, the PROBLEM has BEEN RESOLVED. Speed wireless devices (laptop, HTC a M7 and iPad Air 2) were all back up to 110Mbps or more!

  Hope this experience helps someone else... If your are affected by the passthrough slow internet speeds and it is not your connection speed (i.e. radio parasites) that is the question, there seems to be a serious problem with the latest latest versions of couple... Try downgrading to the R7000 firmware version - V1.0.3.24_1.1.20

  UPDATE: Yes, I actually tested the speed with several different devices (a laptop HP HTC a M7 and Nexus 9) each on 5G band, all compatible with the latest updates ac. I also used a few test sites of different speed (speedtest.net, comcast speedtest, cnet speed test), not had the same result all devices and hosts.

  However, I actually got in touch with Netgear L2 support for the last month... beta test a few different versions of the firmware of the Nighthawk and even spend more than an hour on the phone one night with a nice guy who told me he was on an island in Southeast Asia, part of the Philippines... This is where Netgear technical support is to halfway between China where they build them and Taiwan where engineers are. After trying all tweak he could think for an hour and not get better speeds wireless, he finally dropped out and wished me a Merry Christmas lol. Not one of these beta firmware made a bit of difference, and I hate the hours that they made me screwing around with them!

  BUT today, they released vR7000 - V1.0.4.14_1.1.50 http://support.netgear.com/product/r7000

  And to my surprise it actually worked! Not only my high speed wireless is returned (120 + Mbps)

  http://www.Speedtest.NET/my-result/4078979293 (laptop)
  http://www.Speedtest.NET/my-result/a/1131321713 (nexus 9)
  http://www.Speedtest.NET/my-result/a/1131332778 (htc a m7)

  but also my Seagate SRD0SD0 previously incompatible (3 TB) USB 3.0 external hard drive works now, too. What a bonus! The reason I bought the Nighthawk was to use as Server DLNA and the monster external HD I picked up 6 months ago only was on the long list of those incompatible with this capricious router.

  But now everything works (at least for now).

  P.S. Maybe it's in my head, but I swear to you that since the last firmware update when running speedtest now or file transfer (while heavy streaming) I can hear the router doing a greater slope electric buzzing/hissing noise is a little disconcerting... I'm not sure my brain fried by overclocked wifi will be worth a high speed in the end...: eek:

• OfficeJet Pro 8600 Premium Firmware update

  Hello:

  Known issues with the recent firmware updated for Officejet Pro 8600 Premium of CLP1CN1150CR to CLP1CN1322CR?

  I created the shortcut on the desktop and have printed the presentation and installation Instructions. The printer is connected locally (via USB) to my PC from main office (where I do the upgrade). And I will follow the instructions to make a break my firewall (KIS2013).

  It looks like a simple process, but flashing firmware & BIOS updates on material/mobos make me always disgusted.

  So I'm just now - inquire in advance - of known issues with this particular update or the update process? Thank you!

  daledoc1
  ------------------------------
  OfficeJet Pro 8600 Premium (USB-hand DT & wireless-LT)
  OfficeJet 7410 (USB-old DT & wireless-LT) - still works very well!

  view 58 and no response? Bad luck.

  Well, too bad.

  I guess it is "resolved", I advanced and performed the update.

  I pause my AV/Firewall during installation.

  It took about 5 min or less via a USB connection.

  Also, I restarted the computer after being full, like the phone that recommended technical support, even if restarting is NOT listed in the instructions.

  It seems to have been successful.

  Thanks anyway!

  P.S. for anyone who needs to do this, please don't forget to read the instructions, in particular the warning to the 8600 a connection to the computer via hard wire (ethernet or USB), no wireless. (I don't know if the update could interrupt or not, or if the printer would be damaged if we tried to do wireless).

• MP3 player does not light after firmware update

  I recently downloaded the Sandisk firmware update software and completed the most recent firmware update. Everything is was the firmware update I turned off the player until the firmware has finished updating. It will not now power, or he can reset. Anyone know what is the solution, even if I have to fix, I have 2700 songs downloaded on it.

  Probably easiest and best Customer Support phone, and walk through the issue with them - they can provide an address if and when you get there.  In general, the guarantee is one year in the United States - I don't know if their job with the player more early may affect and extend this.  Of course, explaining that the player was fine until what SanDisk deinstitutionalized it and sent back to you should help.

  SanDisk Contact info. : https://www.sandisk.com/about/contact

• PC now does not see files on the rocket after firmware update

  Until I updated the firmware to v01.02.31P, whenever I plugged my rocket to my PC (Windows XP), it was considered to be a separate drive (e.g., F in Windows Explorer - "Devices with removable storage" and I had no problem using drag & drop, delete files, etc. and download podcasts on Web sites.) Since I've updated the firmware, every time that the rocket is connected to the PC it is now considered rather camera phone in Explorer Windows in 'My Computer' with internal and external memory card uSD

  However, all my existing music files are not 'seen' - for example i.e. the files are now shown as empty, even if the 'properties' of the internal memory shows significant used space and Windows Explorer can't see the files I put on the "rocket".

  Anyone can help getting Windows to 'see' my music files, or is it possible to roll back the firmware.

  Thank you

  The firmware update reset the USB MTP mode or detection automatic (it was before MSC mode). Files transferred in a mode are 'invisible' to your computer when it is connected to the other mode, as you have discovered.

  Just go to settings > USB Mode and she return to MSC if you prefer the way things were before.

• Sansa Firmware Updater fails to install on my PC

  Hello world

  I can't install the update on my pc.

  This is what he wrote when it fails: "Downloding last sansa updater...»    X '.

  "The installation fails. "Please try again later".

  I have tried many times in the past 24 hours and its still the same.

  My pc is clean no viruses, spyware, etc., well maintained, firewall does not block it.

  Any suggestions?

  Most here do not recommend the use of the update. It's a resource hog that will slow your system down and nag-ware is most of the time as whenever you plug your player will be 'phone home' looking for updates. Firmware updates are not very numerous and widely spaced and manually updated (or reinstall) updates usually takes less time than downloading and installing the update.

• The Firmware Update (Sansa clip 2 GB) support

  While he was trying to transfer my cell phone to my Sansa Clip audiobook, I get the following error during the file transfer:

  ""It is not possible to obtain the certificate of the device. " Contact the device manufacturer for a firmware update or other measures to address this problem. » » »

  When I try to down load the latest Sansa firmware using the "Sansa Updater 1.2 ' version, I get the following error:"

  «"" The following error has occurred: cannot download the selected files.»»» Please try again later. » » »

  I currently wear farm: 1.01.11 on my Sansa Clip (2.0 GB)

  Can offer you any advice on the correction of such? A firmware update will solve the problem of certificate? Any help would be appreciated...

  DLR

  There is a message at the top of this map with instructions for a manual update. use that to update the firmware, and then in the settings menu use the format command. Try once's done it charging books.

• Google play language has changed after the firmware update

  My xperia xa language is Turkish. After firmware update that he changed to English, how can I change to Turkish back...

  Solved after that reset sony pc phone app. thank you...

• Unable to connect to LTE after firmware update

  My D5833 could connect to LTE after upgrade to Android 5.0.2. However, it can not longer after the new firmware updated to 23.1.A.1.28. I tried to turn off the phone, remove the SIM card and insert the return; tried flashing using flashtool, none makes it capable to connect to LTE.
  All the tips to solve the problem

  Try to manually add the APN settings and also get a new micro SIM card.

• SPA504G - firmware update

  I would like to update some of the Cisco phones as topic. Can I upgrade using a server tftp on a mac? I've set up a tftp server with a tip to the relevant .bin firmware file, but what to type in the box to upgrade on the web interface of the phone?

  THX,

  Tom

  Follow Administrator's Guide, chapter upgrading the Firmware on a phone

  In addition, off-topic in question here. Firmware update has no relationship to Broadsoft.