Autonomous to LWAPP upgrade on 1242ag AP failure

Upgrade tool I am trying to convert an AIR-AP1242AG-A-K9 LWAPP autonomous access point but the upgrade fails when it tries to load the recovery image on the AP. Has anyone encountered this problem and if so, what is the solution? 12.3 (11) running IOS JA on the AP.

Hi Jason,

Load the standalone IOS using the mode button. Once the IOS is running, copy the recovery image using the "copy tftp: flash:" and change the boot settings to start the recovery image.

Once the AP boots the recovery image, make sure the AP can ping to the IP address of the WLC management and use the command 'lwap ap controller ip address.

I hope this helps.

Tags: Cisco Wireless

Similar Questions

  • LWAPP: upgrading a 1242AG in light mode

    Hello

    I'm trying to upgrade a stand-alone gateway AP-AIR1242AG lightly, but evertime I start tool, the process is stopped, because the tool cannot reach the regulator. The tool recommends that I should allow Telnet, but it is already authorized.

    I can reach the management interface of ping, but something else (web, ssh, telnet) does not work

    the ap has the version 12.3 (7) JA1

    controller (wlc 5508) 7.0.98.0

    Upgrade tool 3.4

    12.3 (11) image JX1

    Can someone help me solve this problem?

    If it's a 1242 AP latest I just manually load the image Conversion LWAPP.

    by using this command

    Archives/force-reload download-sw / overwrite tftp: / //c1240-rcvk9w8-tar.124-21a.JA2.tar

  • Downgrade 1310 G for autonomous to LWAPP

    Hello world...

    I need help.

    I have an AP 1310 G with ' software Cisco IOS, software C1310 (C1310-RCVK9W8-M), Version 12.3 (11) JX1, RELEASE SOFTWARE (fc1).

    I need to configure this as autonomous AP to do a Site Survey, but the APs is reseting trying to record in WLC.

    I read some documents and the answer is this downgrade to IOS software, but it's running in LWAPP version, but I couldn't...

    What is the procedure?

    How can I configure this access point to set up a WLAN for this poll on the Site?

    Thank you...

    Here are the instructions...

    http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

  • Autonomous to LWAPP

    Hello

    I have 5 access-point (AIR-AP1121G-A-K9) in standalone mode (IOS), and now I'm going to buy a controller.

    Should I buy a new (LWAPP) software for the APs? Or can I change free software?

    The software is free if you have access to the cisco site, or try your dealer.

    The image is rcvk9w8 c1100 - tar.123 - 11JX1

    There an upgrade tool that I recommend using LWAPP upgarde tool and make sure that you save the SSC details like its a 1120?

    The links below should help

    http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html

    http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_tech_note09186a008072d9a1.shtml

  • The Access Points of 1142 conversion of autonomous to LWAPP

    Hi all

    I'm trying to convert 5 1142 APs to LWAPP... they came as autonomous APs out of the box, but the client decided to go the unified road, so I need to convert them to finish the job.  I tried to use that tool to upgrade to ver 3.4 and it say that the AP 1142 is not supported by the upgrade tool

    Is there another way to do this?

    Thanks in advance!

    Console or SSH to your access point and enter the following command:

    Archive Download-sw tftp://x.x.x.y/c1140-rcvk9w8-tar.124-21a.JA.tar

    x.x.x.y = the address of your tftp server.

    just like the upgrade to any newer device of Cisco. Of course you need a running tftp server, ect.,...

    Good luck to you.

    Doug

  • Latest MBPs are not autonomous RAM/SSD upgrade?

    Hello

    I recently heard that these latest Mbit/s do not allow users to upgrade RAM or SSD.

    What is the latest model of MBP which will allow upgrades?

    Would that be a model already abandoned?

    Thank you very much!

    No retina 13 inch MacBook Pro is extensible.

    http://www.Apple.com/shop/buy-Mac/MacBook-Pro?product=MD101LL/A & step = config

  • Windows 10 upgrade Windows 7, repeated failure, after trying the main patches

    Problems of Windows 10 Windows 7 Home Premium Edition upgrade (official copy).
    My computer spec:
    HP Pavilion P7-1254, AMD APU A6-3620, Radeon graphics card, 2.20 GHz, 8 GB Ram, 64-bit operating system

    Over the last 10 days, I tried to upgrade to the Windows 10 since his icon on my computer. When you click on icon W10, it says my computer and the system are suitable, then proceeds to download files. This download process takes about 12 hours, and I tried it about 10 times. After continuing problems every time, I searched the Internet for orientation and for others experiencing similar problems (for which there are many). I then tried of these approaches.

    Approach A.:
    -turn off anti virus programs
    -Disconnect devices, including optical drive, printers, etc.
    -off other software
    then try to upgrade again without success.

    downloads about 12 hours, then I accept terms, > modern configuration host has stopped working
    error: Code C190011F

    Approach B with A:
    has raced several times, troubleshooting Windows Update tool as recommended to each alert of error/notification.
    then try to upgrade again without success.

    C method:
    automatic change DNS settings to the new address, Google Public DNS address (IPv4):
    8.8.8.8
    8.8.4.4
    then try to upgrade again without success.
    Download files, then the Installation... clicked on "Accept terms", then, home modern installation error
    Once again, error C190011F

    represented troubleshooting Windows Update tool, as recommended to each alert of error/notification
    Detail-
    Error code: 0 x 80070057
    Origin: RC_Data Store
    Collected files: Check SURLog.cab

    Approach D:
    Then tried this suggested routine for Windows community site:

    Command prompt (admin)

    net stop wuauserv
    net stop bits
    net stop cryptsvc

    Ren %systemroot%\System32\Catroot2 Catroot2.old
    Ren %systemroot%\SoftwareDistribution Software.Distribution.old

    net start wuauserv
    net start bits
    net start cryptsvc

    result, the update routine seems to cling to the file download screen "still from", do not proceed to the dialog window showing the download progress.

    Click on Windows Update again and again error C190011F
    -----

    What can I do to make the upgrade work?

    Problems of Windows 10 Windows 7 Home Premium Edition upgrade (official copy).
    My computer spec:
    HP Pavilion P7-1254, AMD APU A6-3620, Radeon graphics card, 2.20 GHz, 8 GB Ram, 64-bit operating system

    Update the AMD drivers on the AMD Web site, he has worked for many users to date.  Try your WIN10 upgrade.  I have a HP Pavilion with AMD Radeon graphics card and it worked for me.  It is easier to try solution.

  • Upgrade Windows 10 repeat failures

    Upgrade Windows 10 starts automatically - and failed due to an unknown error C1900101-30018. Now he keeps repeating the process and do not and it seems impossible to prevent. It's incredibly annoying because it takes the computer for a few hours at a time. There seems to be no way to correct the problem and get 10 Windows running, or stop the automatic update doomed diversion from my computer. It is my current Windows 7 Home Premium. The message displayed says "Windows cannot configure one or more system components.

    Any help much appreciated.

    Hi Roger,

    Thanks for posting your query on the Microsoft Community.

    According to the description of the problem, you can not upgrade your system to Windows 10. I suggest you return the article mentioned below to upgrade your system to Windows 10 and see if this helps you to upgrade.

    Upgrade to Windows 10 for free

    In addition to this, I suggest to know system requirements and for that you can see the article mentioned below.

    Before installing

    You can also see the article mentioned below to downloaded 10 Windows on your computer.

    Download Windows 10

    You can also refer to article WIKI de Andre da costa provided below and see if it helps you to solve the problem.

    How to upgrade to Windows 10 8.1 for Windows or Windows 7 by using Windows Update

    Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

    Kind regards

  • Impossible to reinstall windows 7 upgrade after replacing motherboard failure

    My motherboard and cpu has crashed, replaced by MB and CPU upgrades. Windows would not start... Then I reinstalled my windows7 Home premium from the DVD I bought to upgrade XP. Installation went well until the activation program. No go says no valid, reentre activation code code same thing. an idea

    Skip entering product key and complete installation and the attempt to phone activation.

    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
    http://support.Microsoft.com/kb/950929/en-us

  • Get Windows 7 upgrade after HARD drive failure

    My HARD drive has failed.  My pc came with Vista with an upgrade to 7.  The recovery disc are Vista.  How can we get 7.  It is impossible to contact HP by email.  My product ID has rubbed off.  Otherwise, I would install just 7.  Any suggestioins?

    Hello

    I think that HP has sent you a DVD with a key for this free upgrade a few years back. You must know where you keep now, otherwise you have to communicate with Misrosoft because it's a Microsoft product, and Microsoft's offer through agreements with other providers of material.

    Kind regards.

  • Vista Home Premium Upgrade to Windows 7 failure

    Vista Home Premium upgrade to Windows 7, hang up to 63% finished!

    Try the following and see if it works:

    Microsoft Fix It Tool for 62%:

    http://go.Microsoft.com/?linkid=9693817

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  • Upgrade to Windows 10 failure error c1900101-30017

    After trying 4 times, I get the same error c1900101-30017
    I tried everything and still nothing.
    At the first start windows 10 freezes at the startup screen.
    So I restart 2 times and then he return to windows 7

    What I have tried to remove before window 10 starts the first time

    Remove all USB items

    Disable all antivirus programs

    between relocations

    Remove the Setup files failed and re-upload everything.
    Please help, or I'll have to consider 10 unnecessary Windows when it comes to my PC

    Workaround
    Whenever the system reboots kill power
    The system must restart hard whenever it tries to restart. This must occur before the system starts to open the windows.

    If you like me have a logo to watch because then it's easy.

    Start the installation

    At the first reboot killed the power wait a few seconds put the current

    And so on
    http://www.tenforums.com/installation-setup/9565-Windows-10-installation-freezes.html

  • How to upgrade Photoshop CS6 after failures

    Photoshop CS6 will not update.  I receive a notice of default.  I uninstalled photoshop CS6 preferences and management assist then reinstalled

    update by downloading the files directly and then apply them:

    http://www.Adobe.com/downloads/updates/

  • Code 1141 autonomous

    I have a customer who bought 1141 TOWER by mistake because it doesn't have a controller. What he wants is to use autonomous. There is an image that can be downloaded to convert these AP in standalone mode?

    Thank you

    Ken

    Hi Ken,

    Here are the release notes for the IOS which supports the 1140's:

    http://www.Cisco.com/en/us/docs/wireless/access_point/iOS/release/notes/12_4_21a_JA1rn.html

    And this doc;

    http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp161272

    I hope this helps!

    Rob

  • Cisco 1242AG Config AP watered

    I have an access point that has been on a WLC LWAPP but during an upgrade, it is watered one got it.  When starting, it just stops and shows red lights.  I comforted inside and it will start to boot and then give error loading 'Flash:/update/c1240-k9w8-mx.124-18a.JA2/c1240-k9w8-mx.124-18a.JA2.

    Interrupt within 5 seconds to cancel the startup process

    boot process failed...

    The system is unable to boot automatically.  The BOOT environment must be set for a bootable image.

    PA:

    Well, I have a new picture, but my question is how to do this in the AP with the console cable.  Can I use xmodem or something like that.  Once the AP goes up to the point where it shows ap: then it stops.  There is no typing or something that works.  Someone at - it a link that explains how to put the code in an AP with an image of bad start or can you explain how to do this.  I would be happy.

    Thank you

    Joe

    By using a TFTP server to revert to a previous version

    http://www.Cisco.com/en/us/docs/wireless/access_point/conversion/LWAPP/upgrade/guide/lwapnote.html#wp160918

    Please do not forget to note our useful messages.  Thank you.

Maybe you are looking for

  • Re: Is Windows 7 beta ok for Satellite L300 - 12K?

    Hello I intend to try Windows seven on my Satellite L300 - 12KAll devices work ok?What stability?Perfomance better than vista? Thank you

  • Windows mail "not responding".

    Since last week, when I click on the icon of Windows Mail, the program is very slow to load (30 seconds) and then mode "Windows Mail does not ' for another 25-30 seconds, until finally he connects to the server and get my mail and runs correctly. Doe

  • Product key for Windows Server 2008 R2 OEM becomes key to retail

    Hello I'm a developer attempts to deploy Windows Server 2008 R2 with Windows OPK. The machine, I am preparing has embedded OEM product key and Microsoft Genuine Advantage Diagnostic Tool (MGADiag.exe) shows the Type of product as ID: 3 OEM System Bui

  • How can I get my 25 character product key?

    How to get my 25 key product because if ever I opened my Microsoft (almost everything) it ask product key is so please help me Thank you very much

  • Missing DVD/CD after the factory restore (Code 39) Player

    Hey Dell Community! I recently restored my computer to factory and everything was fine. My CD/DVD drive worked fine until this last time, I rebooted my computer. Now, it is not in my computer and does not have any CD/DVD. In Device Manager the drive