AutoPlay does not when I insert a DVD

Original title: why what dvd movie including files explore not when you click on the icon of the DVD in the DVD player?
 
Sorry for the bad English.
I have windows xp dvd. I disabled Autorun with combofix (when you do a scan with combofix that automatic how disable automatic playback). When I insert the dvd it works. I mean this isn't the automatic reading and when I click on this dvd xp its just explore.
DVD consisting of dvd movie files is not auto play, but when I click on this windows media dvd player plays movies that found here (I mean his exploration do not like windows xp dvd) and there is my question:
His exploration not and why its played by windows media player?
Maybe I need to change or remove some reg keys?

Hello

1. what exactly happens when you click on the DVD drive?

2 you get an error message, if so what is the exact error message you?

Perform the steps in the following link and check if this can help:

The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

http://support.Microsoft.com/kb/330135

Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

How to back up and restore the registry in Windows

http://support.Microsoft.com/kb/322756/  

Let us know if it helps.

Tags: Windows

Similar Questions

  • Why autoplay does not start whwen I insert a dvd in my acer aspire

    When I insert a dvd into my player I get a message saying that windowe does not say this and that ITI may require setting in shape, but I can't get autoplay to exploit

    In the first place to run this http://support.microsoft.com/mats/cd_dvd_drive_problems/en?wa=wsignin1.0 FixIt

    If the problem persists, then in Device Manager there yellow caution marks?

  • My AutoPlay does not work when I insert my card from camera to upload photo.

    AutoPlay does not as well for my hard drive. I use Windows Vista and have successfully set autoplay under the hardware and audio.

    The following links may be worth a visit:

    Windows Vista - Troubleshoot AutoPlay
    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

    Windows Vista - AutoPlay: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

    Windows Vista - How to change the auto run settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  • CD/DVD AutoPlay does not not on Satellite L550-1CC

    Hello

    AutoPlay does not appear when you insert a disc in the CD/DVD drive or use a USB more.
    He used be ok up to 3 months ago.
    I don't remember if I did anything to get rid of AutoPlay.

    It is a satellite L550-1cc, windows 7. 64-bit operating system.

    I went into Control Panel / hardware & audio / Auto Play and Auto Play's Ticked the box for all.
    Still no Auto game
    Then go into My Computer directions click on DVD - RW drive / properties / material / click on TSST corp CD DVGW
    TS-L633C. The display now indicates "this device now works correctly.
    But there is STILL no Auto play.

    Please anyone know where to go to the next, I'm lost?

    Thanks Martin

    The AutoPlay option isn't appearing any more in Win 7 under the CD/DVD drive properties.
    Auto Play located in the Panel as you suggested above.

    Panel-> AutoPlay
    Here you must check the option called reading auto use for all devices and media

    Now if you want to listen to an Audio CD, you must choose a default application for Audio CD. Here, change the option called choose a default of Windows Media Player, in case you want to use this software for automatic playback.

  • AutoPlay does not work for DVD - RW drive

    Original title: Media Player

    When I go to my computer-drive DVD - RW (D) - properties - auto play prompt me each time to choose an action-apply-OK; It dose does not work when I insert a disk in my computer; WHY? Help, please!

    Hello

    ·         What exactly is the problem? Do you want to say AutoPlay does not work?

    ·         What happens when you try to insert the CD/DVD in the CD/DVD drive?

    ·         You are able to open the CD/DVD directly from the my computer window?

    I suggest you follow the steps mentioned in the articles below.

    The AutoPlay function does not work and the current media does not appear in my computer when you insert a CD or DVD

    http://support.Microsoft.com/kb/817357

    The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

    http://support.Microsoft.com/kb/330135

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.

  • drive Windows does not start a cd or dvd. it keep said to incert cd after I insert it

    drive Windows does not start a cd or dvd.  it keep said to incert cd after I insert it.  It can not read the cd or the dvd to start.  I rip, but it tells me to put it on cd.  I made a full recovery but still does not.  I have a Lenovo all-in

    Hi Kenneth,

    1. are you able to read files with another player?

    2 have you made changes to your computer recently?

    3. from when are you facing this problem?

    4. what operating system is installed on the computer?

    I suggest you follow the method and check if it helps.

    Follow the link and check if that helps.

    Your CD or DVD drive cannot read or write media

  • All of a sudden my AutoPlay does not work. I tried changing the settings but nothing seems to work. Help, please.

    It was just after I downloaded a newer version of itunes.  I tried to do a system restore on it, but it did not help.

    I was wondering... you already tried system restore...
    It restore your system but just don't
    fix AutoPlay?

    Or... She didn't have to restore your system?

    ===

    No guarantee... but if you're comfortable editing
    the registry, the following article may be worth a visit:

    Proceed at your own risk *.

    AutoRun/AutoPlay does not work when a CD/DVD is inserted
    http://vistasupport.mvps.org/autorun_autoplay_don't_work_when_cddvd_is_inserted.htm And... the following links may be worth a visit:

    (982116) your CD or DVD drive is missing
    or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
    (Windows XP / Windows Vista / Windows 7)

    Your CD or DVD drive cannot read or write media

  • AutoPlay does not retain what I select in windows 7. Changed 3 ot 4 times.

    It changes to "take no action" he did for CD/DVD, Media Player, games, etc. Is there any solution for this?

    Hello

    Thanks for your posting in Microsoft Community

    You can bail out of the selection yourself and change the AutoPlay option.

    Click the Start button and in the search box of the start menu, type and press auto on enter, or if the research does not AutoPlay, click Start-Control Panel-default programs-change AutoPlay settings

    Here are all possible media and devices as well as their auto run changed settings or default. With each media or device is a drop-down (arrow) that allows you to change the auto play action. For example, if you wanted to Media Player to start for all video files, click the following video files, select Windows Media Player, and then click Save:

    Around the navigation, you will see different options exist for other devices and media. Among the parameters common to choose are take no action, ask me every time, and open folder to view files using Windows Explorer. After making changes, make sure that you click on Save to save the new setting.

    If Autoplay does not start after you insert media or when you plug in a device, but the fact of the work for the other media and devices, follow the steps as a possible solution below:

    a click the button start-all programs-accessoriesand then right click on command prompt.
    b - click on run as administrator.
    c at the command prompt, type net start shellhwdetection, and press ENTER.
    d - restart your computer

    More help

    http://support.Microsoft.com/kb/330135

  • AutoPlay does not appear. Cannot import the photos with a memory card.

    I already went to the control panel and under AutoPlay changed my settings.  When I insert my memory card... AutoPlay does not appear.

    Hey DeniceM,

    Try to use the defective Autoplay Repair Wizard to see if it can find the automatic run settings and correct them. You can download it here:

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en

    Hope that helps, I look forward to hearing from you.

    Steven
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • computer says please insert a disc when I insert the dvd

    computer says please insert a disc when I insert the dvds:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

  • AutoPlay does not work for usb cords

    When I plug my cable for my iPhone or Canon camera in the front USB port autoplay does not appear. iTunes recognizes my phone and syncs fine. No devices are listed under "devices" in the "Auto run" section of the control panel. I found the iPhone under cameras in the control panel but cannot depend on AutoPlay.

    I tried all the solutions I found on this forum and others, but nothing did.

    I just tried to put a DVD into the cd drive and AutoPlay didn't pop up for be... Help!

    Hello

    Follow the steps in the article below and see if that fixes the problem.
    http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

    See also:
    http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  • AutoPlay does not work, Windows 7 Ultimate 64-bit

    I have Windows 7 Ultimate 64 bit on my gateway SX 2800, AutoPlay does not work with anything, DVDs, CDs, thumb drives, nothing. When I got my PC it had Vista Home Premium 64-bit and AutoPlay works great, now that I've upgraded to Win7 it doesn't. I went through the steps in Control Panel to configure automatic execution, but nothing helped. Help, please, thank you, Ted.

    See this link-

    http://Windows.Microsoft.com/en-in/Windows7/Troubleshoot-AutoPlay-problems

    If she does nothing then run SFC

    1. open an elevated command prompt.

    2. in the elevated command prompt, type sfc/scannow, and then press enter

    _____________________________________________________________________________________________________________

    Telloin

  • Satellite M40X-116 - drive does not recognize any CD or DVD

    Hi all!

    I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
    Please I need your help as soon as POSSIBLE.
    If you know what could be the problem, please, just send an e-mail to [email protected]
    Thank you all for the cooperation
    Best regards
    Marian - Romania

    Hello

    to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.

    Good bye

  • Blue screen when you insert the DVD - M40X

    Hello
    I have a new computer laptop toshiba satellite M40x-183. (with DVD super multi)
    After ten days of buying it, I found a problem when playing some DVD and CD, when I insert the dvd I got a blue screen saying... There is an error and windows can stop harmful to your pc and I have to contact the support then start dumping from 100% to 0%...
    I have tried the dvd in many other dvd players and it works perfectly. Team support here told me that this type of dvd player are unable to process this format how it happens so that older toshiba and other laptop brands can do!
    Is there a solution to this?

    Hello

    Well, as the support service team say that the DVD player is not able to read this format.
    But I can't give you a good answer why it s not possible to play this DVD. It s a simple fact that there are many DVD and CD formats on the market and number of readers is not able to play some formats.
    Have you tried to play burn DVDs? I recommend you to test the DVD from other manufacturers. I use TDKs and it works correctly.

    Good bye

  • After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

    After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

    Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

    [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

    8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

    9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

    10. restart once again & test.

    NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Maybe you are looking for

  • View target on iMac late 2009

    Hello. Unfortunately my iMac late2009 a big problem: the iMac works fine but I had black and artifacts are on display (i.e. on the left side of the finder window). I suspect that the graphics card has disappeared. It seems that he is too old to be re

  • I did sort the display on my iPhone so much, it's not all see them la.

    The display on my iPhone is so great that on the phone does not display the entire page.

  • Do not receive messages from sms for voice mail notifications - problem apple ID

    Hello For a while I have not received the text notifications for voicemails left on my phone. I did a factory reset and then configure the phone as a new phone, and I received notifications of text. I then registered in my apple ID and stop notificat

  • starting problems & General freezes; lots of q

    using vista home premium 32 bit. updates installed as they come. use KIS2010 but now NortonIS 2010 this year. (machine 'built'; Intel Core2Quad 2.2 GHz, 4 GB of DDR2 RAM, disk HARD 750 GB [(Win dit 700 Go) in 4 primaries * partns;] D: (C: 50GO pour W

  • On windows 10

    8 months using windows 10. recently, it's been my 10 got windows crashed and I go to the computer store and shopkepper own, install windows 10 and install windows 7 service pack I can improve service pack for windows 10?