AverMedia DVD EZMaker 2.0 is not compatible.

Similar Questions

• I am trying to install windows 7 64 bit on my laptop. I have Vista 32 bit and 7 32 bit out there, but when I try to load the easy transfer from the dvd, he says it is not compatible.

  I would agree with everything destroyed and, if there is a way to get windows 7 64 bit on my drive.  Transfer easily gets a «not compatible...» "answer, as does the dvd when you try to start it.

  To switch from Vista to Windows 7 see the following download link (you will need the 32-bit version): http://windows.microsoft.com/en-us/windows7/products/features/windows-easy-transfer

  J W Stuart: http://www.pagestart.com

• Satellite A500 - video/dvd player is not compatible with Windows 10

  After having recently updated of my laptop for windows 10 I discovered that the dvd player does not work. A message is displayed informing that the player is not compatible with this version of windows. A scan using Norton suggests dvd will not work because it needs to be configured.

  Does anyone else have this problem?

  Obviously, Toshiba DVD playback application that is preinstalled on this Satellite A500 model is not compatible with the system Windows 10.

  In this case this software will not properly work after the upgrade to win 10 and I guess you have to remove the system Win 10.

  Unfortunately, the Satellite A500 is not listed as Win 10 portable computers and so I don't think you will get an update to this software for DVD playback.

  Here is a list of models supported for upgrading to Windows 10
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

• Satellite P850-12Z - Toshiba DVD/BD drive is not compatible?

  My disc drive won't read disks. I get an error message saying your ot Toshiba dvd/blue-ray player version is not compatible with this version of windows which is 8.1.

  How can I fix it?

  Your laptop model was offered with Win7. Have you installed the version of clean and later put Win8 to level to Win8.1?
  What version you used in the past?
  Have you installed player version available on the Toshiba download page?

• Satellite A110: I want to play a DVD but it says: not compatible

  Hi I have a question.
  I have a toshiba satellite a110. But when I want to play a dvd, it says:
  is not compatible...
  :(

  Can't watch movies, how to... :(

  I have installed some software dvd - ram also uninstalled, restarted the laptop.

  Someone?

  Hello

  Are you using the Windows operating system that has been preinstalled on the A110 Sat?
  AFAIK almost all Toshiba laptops come with WinDVD program.
  I also assume the Sat A110 supports this software and you must use it to play the DVD s.

  One question; What DVD did you play? An original or a copy?
  The portable DVD Player supports different DVD region code settings.

  Please check if the region code that was chosen on the CD/DVD drive supports your DVD media!

  For example; you will not be able to play the DVD we s if the region has been set for region 2

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• "The color is not compatible" error during DVD playback

  While recently playing a dvd, I got a message saying that the color was not compatible or some such garbage.  I already watched this movie to dvd before without problem.  Now I can't get my computer to play a movie in color as the setting have been changed without my knowledge...

  All I get is blue and mustard tones.  How to bring back the color so I can watch my movies?

  REET

  That means the monitor cable is lose generally or broken inside.  But since you said it showed a message, you might want to consider maybe just using the option #1 here to cancel and return to until you get this message.

• My Windows Media says it is not compatible with any DVD security code I try to play.

  I use my DVD player on my computer all the time when I want to watch a movie and am not in a room with a DVD player. I just used it about 3 days ago and it worked fine. Now, when I put a DVD, a DVD, an error message appears saying that Windows Media is not compatible with security on the DVD (s) codes that I'm playing, and I need some sort of update. It doesn't tell me what I need and when I click on 'web help', I said that there is a mistake, and that there is no other info. I'm not a geek of any kind and do not really understand computers for use much more basic. Please help me understand what the problem is, and if I need an update, where. Thank you.

  Hi Mary,

  Thanks for posting this question in the Microsoft Community.

  I'll try to help you get the problem solved.

  I would be grateful if you could answer the following questions:

  1. Are what you signed up as an administrator?
  2. Are you aware of any change (software or hardware) performed on the computer before the show?

  You can perform a System Restore to the date when the computer was working fine and check.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Equium A210: "tsst corp ts-l632h" firmware is not compatible with my drive

  Last year I had an Equium A210 17l of pc world. I recently bought some dvd - r tdk discs and the drive cannot read them. It's as if there is no disk in the drive.
  So I thought I'd hunt around to see if there is updated firmware for the drive. I downloaded the firmware from this site, but when I try to update it says that the disc is not compatible! Evey bit of software I said the player is a * tsst corp cddvdw ts-l632h * with firmware to01.

  The firmware I'm trying to download is [this | http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=UK&selCategory = 2 & selFamily = 382 & selSeries = 173 & selProduct = 742 & STAS hortMod = 680 & language = 13 & selOS = 26 & selType = 50 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = 8 & electedLanguage s = 13 & type = 50 & page = 1 & ID = 63137 & DISO =-1 & driverLanguage = 42]

  But whenever I try to run it it says that it is not compatible with my drive! What is going on?

  Jim Venner

  I recommend you to first install the 2 firmware until the you´re trying to upgrade the drive with the a3 because it is possible that the a3 requires the 2.

  Please visit the site to download drivers, download the firmware 2 and check if it works.
  Would appreciate any comments on your part.

  Welcome them

• DVD/CD-RW drive does not-Tecra A4

  Hi, I have a problem with my Tecra A4.
  My DVD CD - RW drive does not work properly (power is there, but it does not appear on the system), I have temporary installed a drive of DVD - RW from my HP laptop which works very well.
  I tried to run my restore disk (never used), but nothing happens (press and hold C to start). This will only work with the good drive installed or I do something wrong?

  p.s. I bought this second hand, but it's new. He had a damaged screen I have replaced

  Julian

  If the old drive will not read media if it s damage.
  You know that not every disc is compatible with the device because of the csel/slave/master settings.

  You said that the button C doesn't allow you to boot from the disc.
  In this case, I would recommend to get into the BIOS, and there you can change the boot order.
  However, this trick is everything works only if the new drive is compatible and supported

• Satellite A210 - update the Firmware is not compatible

  I just tried to run this update sent through Tempo and I get an error message saying that the update of the firmware is not compatible with the selected drive. Contact the manufacturer for more information about the updates of the firmware.

  What I am doing wrong?

  My laptop model is A210 phone.
  Here is the information of update on my alert tempo.

  FTP - URL frmwre - 20080422163939.zip

  Date last modified 30/06/08
  Subtype TS-L632
  Version TO02

  Are 100% sure that your Satellite A210 was equipped with the TS-L632 drive?

  To my knowledge, the error message as mentioned in your ad appears only if the firmware is not compatible with the CD/DVD drive!

• Compaq Presario: NVIDIA GeForce 6150SE nForce 430 chipset is not compatible with Windows 10

  I try to upgrade to Windows 10 and I get message that current chipset is not compatible with Windows 10. My PC is Compaq Presario motherboard M2N68-(NARRA5). Is there a graphics card for this motherboard is compatible Windows 10?

  You need to burn a DVD to install windows 10. It's going by checking the video card. https://www.Microsoft.com/en-us/software-download/Windows10 32-bit or 64-bit. Then after win 10 is installed, and then install the 32-bit or 64-bit driver http://www.geforce.com/drivers/results/82758 64-bit video dated the 2015 http://www.geforce.com/drivers/results/82701 32-bit dated 2015 good luck it really works

• Not compatible with the selected drive - Satellite A300D firmware update

  Hi, I have a problem with the update of the firmware. When I try it says "the Firmware is not compatible with the selected driver.

  And another problem is that my dvd drive does not DVD - R and DvD + R is running very slow and big trouble, it must try several times to succeed.

  Please help me.

  Hello

  Maybe you should tell us what CD/DVD drive you have and where you have downloaded the update of the firmware.
  In my opinion firmware update is not normally necessary.

  Have you ever tried to remove upper and lower filters in the registry? This often solves problems with ODD.

• Error: "drive could be damaged, or it could be in a form that is not compatible with Windows.

  Original title: CD - R driver problem please help if you can

  I have a white mark of Memorex CD - R into my drive (D :) and when I try to read it, this happens, "disk may be damaged or it could be in a form that is not compatible with Windows. I have Windows XP on my desktop, any suggestions for help? :(

  Hi MichaelPrincipe,
  -Other recognized CDs without any problems?
  Try to use the CD on another computer and check if it is recognized without any problems.

  Run the fix it tool is given in the link below and check if it helps.

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• After the installation of Windows Vista, I get this error: winload.exe tries to load a 64-bit application, but this processor is not compatible with the 64-bit mode.

  I recently installed Windows Vista on my Dell Inspiron 6000. This installation is completed successfully, but when I tried to start, I got an error message:

  Winload.exe

  Attempt to load a 64-bit application, however this CPU is not compatible with the 64-bit mode.

  I've been clean installation Windows Vista Home Premium. I already had Windows XP Media Center 2004. What should I do?

  Thank you

  Ryan

  Hello

  Do a clean install of XP with the XP disk provided by Dell, if you.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  If you do not have your XP disk, you can contact Dell and ask them to send you a XP disc.

  They should do this for a small fee.

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Vista installation was able to destroy this option of relocation:

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall XP back on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  A Dell must rely on Ctrl + F11 at STARTUP to reinstall XP

  See you soon.