AverMedia TV Player & widows 8.1

Similar Questions

• How to use Tuner Avermedia TV card

  How to get the card Avermedia to work on HP desktop computer and be able to use only one remote control for the sound and change the channel.

  Adventures with a new computer HP Pavilion 'All In One' 23Z

  OLD PC - a bit of history first. We had an older hp (2008) in an office with a touchscreen. It had Windows Vista and it became more difficult to maintain. This computer came with an integrated TV card and IR receiver IR blaster output port and cable that comes with it. We have Comcast service and have the updated set-top digital. We used Windows Media Center (WMC) to watch TV on the computer. We have configured WMC so he would understand the controls on the Comcast remote and transmit on the IR blaster to the Comcast box. We recorded the outside end of the cable, IR blaster to the front of the Comcast box, directly in front of the eye of the IR receiver. We were able to use the remote control supplied by HP to change channels and adjust the volume and mute. (All orders that we needed to watch TV). WMC has some basic record and play facilities that we rarely used.

  NEW PC - we decided to upgrade to a new computer and got the last HP pavilion all in one office. He came originally with windows 8.1 which later, we went to 8.1 pro. Support HP told us we had to 8.1 pro for WMC. WMC on later. We got an Avermedia card with the new all-in - one desktop computer. It worked fine with the Avermedia software. Even if we had to use 2 remotes, one for the Comcast box to change channels and the other for the HP computer change the volume and mute. We got the Avermedia TV version 1.8.1 of player with the card Avermedia H8370 hybrid USB ATSC/QAM. Avermedia TV player is easy to set up.

  We got WMC for windows 8.1 pro and hope we could configure it as our old computer to work with a single remote control. We tried to set up WMC, it stopped and would go no further without an IR receiver. Because the new computer came with a remote, we thought it was an IR receiver built in, and so HP. coming to thin out, the remote works in conjunction with the keyboard and mouse, wireless. It does not work when the wireless receiver is disconnected from the USB port. There is no edge receiver IR in the new computer. We were looking online and a USB receiver connection IR has a HP top brand name, which comes with a remote control and IR blaster that should allow him to transmit the signal IR of the Comcast box. (as our old facility) We ordered and installed. It requires no drivers to install with him. We went back configuration WMC and had the 'no IR receiver message' and after several tests on configures the remote (possibly with some success), Comcast finally got a "display driver error, video playback device does not support playback of content protected.", and we could do more. Comcast broadcast signals are encrypted, but not protected. In addition, the Comcast box hangs the Avermedia stick by a coaxial cable, which broadcasts on channel 3. I expect this type of error if we fed the Comcast cable directly into the Avermedia card. In any case, while playing with WMC to get the signals just distance and configurations, I noticed that the Comcast remote would now adjust the volume on the HP computer. He is working through the new IR receiver. We dropped WMC and questions and are now using the Avermedia software with one remote (Comcast). We got an extension IR of Comcast cable that allows the transmission distance of the Comcast box IR signal. We were then able to mount the Comcast box behind the computer screen and to simply stick the IR extension cable receiving end on top of the computer screen. All I can understand is that volume up and down and mute signals must be common to the Comcast remote and HP computer. There was no attempt to reconfigure the remote with all the 'TV' Comcast codes, we are just using the default settings on the Comcast remote.

  All the functions work Comcast normally since we use the Comcast remote, controls only that we really need had to adjust the volume and mute on the computer and now it works. The Avermedia software has a few basic functions of recording and we have now all the facilities that we used to have.

  All we really needed to buy was the IR receiver to make it work. There is need of distance from HP (we now have 2) and cable IR blaster provided as a package. The IR receiver has been listed as a NEW HP USB MCE IR receiver/Remote Controller / Win Vista 7 infrared transmitter. We got it from Las Vegas ECHOMAN. We found it through Amazon for about $19,00. HP can't find it as a product of their business in order to not try. There may be other solutions out there, but it worked for us.

  The new HP 'All IN One' is not really "all-in-One". It came with 4 USB 2.0 ports and 2 3.0 USB ports. I had to use 2 USB port for the work of the TV and 1 for the wireless keyboard / mouse work. The old computer had on-board IR receiver, TV card, and keyboard/mouse IR blaster port/cable and wireless receiver.

  We were very disappointed by HP sales and service in support of this product. Sales did not know what they sell and everything promised, and there was virtually no support for hardware/software support team. We finally got help from HP, but it was a 'Case manager' when we finally threatened to return the product. HP gave us aid coverage is extended free of charge for all our troubles. We contacted Avermedia for help and they would only return us HP because they were second retailers part. AVerMedia gave support, but only after repeated emails. All this knowledge was acquired through the school of hard knocks and seems really simple, when you look back on it.  So we hope this will help someone who is in our position.

  This problem has been resolved.  We sent the rear Hp computer and bought a DELL computer with a port of HD which connects directly to our set top comcast and press us a button and it goes into HDTV mode and push it again and it goes back to the pc mode

• Re: TV Tuner

  Hi, I have the same problem, can't find the TV tuner in Windows 10. I bought this in 2013 and it came with Windows 8:

  Hello Malygris1,

  I have use any of these links, you have provided.

  It turned out that Avermedia TV Player that came with my HP Touchsmart, always seems to work on Windows 10, although he can only play an analog signal of my u-verse cable box. If the image is pretty bad.

  Thanks for trying to help,

  MJ - lee

• Widows Media Player to play a .im_ file?

  Original title: play im_ flile

  Widows Media Player to play a .im_ file?

  Hello

  What version of Windows media player do you use?

  IM_ is a file extension associated with the Audio files compressed to improve. Windows media player does not support files with this extension. Guests may use the appropriate codec or the last codec to play.

  Reference:
  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions (this item can also be used for Windows XP)
  Player Windows Media for Windows XP supported Codecs
  http://support.Microsoft.com/kb/291948

• I have widows vista and it let me download the new flash player.it says some thing he stopped downloading.but it does not say what/how can I fix that

  I had the old flashplayer 10 on my laptop but it says: I need the new Flash Player 11 to watch movies or video now.but it won't let me download guard .he stopping in the middle of the download and say something stopped her, but not that

  Hello

  Try to uninstall the old version of Flash before you try to install the new version; the uninstall to the provided link information:

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Then try to download the latest version of Flash, making sure that you uncheck the Google Toolbar download option there:

  http://get.Adobe.com/flashplayer/

  See you soon.

• Widows Media Player will not play videos.

  Windows Media Player will not play videos at home. I get a message that windows has closed the program. Media Center and Adobe will not play videos as well. The videos are. MOV. Can someone help with this problem? Thank you.

  Windows Media Player will not play videos at home. I get a message that windows has closed the program. Media Center and Adobe will not play videos as well. The videos are. MOV. Can someone help with this problem? Thank you.

  ==============================
  Some possibilities follow... good luck...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  The components of the 3ivx decoder read
  most MP4, M4A, 3GP, MOV and AVI files
  with Audio MPEG-4 video and MPEG-4 AAC

  3ivx decoder
  http://www.3ivx.com/download/
  (this should make Windows Media Player compatible
  with the .mov files... I think that there is a 30 days trial version)

  Also... the following freeware players can play QuickTime .mov files.

  Apple QuickTime
  http://www.Apple.com/QuickTime/Download/

  QuickTime Alternative
  http://www.codecpackguide.com/quicktimealt.htm

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/
  (just unzip and run it... (no installation required)

  Media Player Classic Home Cinema
  http://MPC-HC.sourceforge.NET/

  If you want to install a pack of codecs... one of the following
  may be worth a try:

  * Proceed at your own risk *.

  K - Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/
  FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates.

  CCCP (combined Community Codec Pack)
  http://CCCP-project.NET/

  Info about CCCP
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
  (FWIW... it is always preferable, if you create a system restore
  point before installing any software or updates)

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• When I play the dvd in widows media player, the color/contrast is far away. The image is too red, and too dark. Is there a way to fix this?

  When I try to watch DVDs in Windows Media Player, I look never for long.  The image quality is very dark, the colors are too intense.  Ive tried to find ways to address this, but I'm having no success.  I don't have this problem when I stream Netflix movies or watch online. Only in Windows Media.  I'd appreciate any help you might be able to give me in this regard.

  Try resetting WMP12

• Satellite A60 DVD Player problems

  Hello
  I have a Satellite A60 (18mths old now) - when I 1st got it the DVD burner was DOA - so I sent off the coast and he had replaced.
  It has worked well since then until recently when the DVD player just wouldn't recognize anything - CD or DVD

  Tried everything with this unit - but at the end of the day understood the drive was gone.

  Another bought a (SD-R6252) and lo-and-this is the same thing happens.

  Each diagnosis that I run says the drive is OK - but there is no disk in it.
  I reinstalled windows from the recovery factory - discs
  Update the BIOS
  Tried to update the firmware of the drive-, but the update said that this was not necessary.

  Tried with Nero, Windows, InterVideo - nothing.

  As it is now a working machine that I can't afford 3 months back in time to send it off and watched it (that's how long it took the last time) and my nearest dealer of Toshiba is in place at the other end of the country.

  Suggestions for things that I can try out would be greatly appreciated.

  Hello

  The new drive can read CDs but can not burn anything. Am I wrong?
  Or the drive cannot recognize the media that in the Windows operating system?
  You said that you have reinstalled the widows. In this case, you used the drive.

  Try to remove the drive from Device Manager. Restart the unit. Now check if you can use CDs and DVDs

• After removing the Real Player, I can more open shortcuts to office.

  Original title: How can I fix problem with shortcut

  Wednesday, June 28, 11, I used IOBOT advanced system care 4 uninstall (uninstalling advanced deep) utility to remove real player.  I didn't know that he loose Windows Media Player 11.  WPM 11 has also been removed.   I couldn't open anything of my desktop shortcuts.  I tried to open IE7 with open with IE.  Does not open.  He converted all my desktop icons to open with IE.  Go help and support in the menu start for system restore, but could not access it.  So on the advice of the person of Tech of the company that built my desktop computer (measure locally) I used family my Widows XP Edition disc repair facility to try to repair Windows.  It worked.  Reinstalled SP3 and all updates and WMP11.  All my desktop shortcuts were still open with IE.  Could get the system restore, but the big problem is that I'm not able to go to any date before 06/28.  I sent an e-mail to Microsoft Help, indicating all of the above, but all I got was an email with a link on how to use the system restore.  I don't have any external drive that can hold 50 GB of data (I have a 80 GB hard drive).  Is there a way to fix it short of erasing the hard drive and from scratch?  I thought to delete all the shortcuts which are open with IE, but would then lose everything in the programs in the start menu.  Any help will be greatly appreciated.  Thank you

  Hi SteveHavlish,

  Method 1

  Check out the link and run the Fixit tool available, check if it helps.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/

  Method 2

  If the previous step fails, then please refer to the Microsoft article and check if that helps.

  Cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP-based computer

  http://support.Microsoft.com/kb/923077

  Method 3

  If the previous step fails, then you need to change the file associations for the shortcuts corrupted office.

  For more information, see the article.

  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

• Why Windows Media Player doesn't open my files

  I am running Windows Xp Pack3 of SVC. "When I try to open attachments downloaded widow Windows Media Player pops up informing me:" the selected file has an extension (.pps) or (asx) or (pdf) that is not recognized by Windows Media Player, but the player may still be able to play. "Because the extension is unknown to the player, you should be sure that the file is from a trustworthy source.

  All my emails are close friends and relatives, which means that the files are trustworthy.

  Hi j.k.glissmann,

  · What is the email client or webmail you are using?

  · What is the attachment file extension?

  · How do you open the attachment?

  · Is it by double-clicking or you choose open with option.

  According to the error .pps .pdf are powerpoint file extensions, adobe. And these files are not supported by media player.

  Media Player supports: .asf, .avi, .wmv, .mpeg, .mpg, .m1v, .mp2, .wav, .snd, .au, .aif, .aifc, .aiff, .asf, .wm, .wma, .wmv, etc.

  With regard to:

  Samhrutha G S - Microsoft technical support.

• How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

  Separated from this thread.

  Hello

  Thanks for the reply, I clicked on the link and it shows windows...

  Here I can not open the widows of anywhere.

  How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

  MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

  He always goes to startup repair

  then he said not being able to correct automatically

  Under system recovery option what can I do?

  I don't want to go back to the point of origin of the memory (factory settings)

  Thank you

  Patrick

  Hello

  Have you tried using SafeMode w/command invites to perform a system restore?

  1. Press the power button to turn on the computer.
  2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
     
  3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
  4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
  5. Follow the on-screen instructions to perform a system restore.

  You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

  Using Microsoft System Restore (Windows Vista)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

  You also have the option to create a backup of your files when you perform a recovery

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

• Installation window Media Center with Avermedia A850 DMB-TH/DVB-T

  Hi all

  I am located in Australia and I have a USB TV tuner which can be used for DVB - T or DMB - TH digital system. I tested it on the player of AverMedia TV tuner, which worked well and I can't all channels using an antenna from the wall outlet. However, it doesn't seem to work when I went to the Media Center window with the same exact configuration (taking wall antenna).

  I tried to use it on Windows Vista and 7, which gave me very different results.

  --------------------------

  Vista: When I click on "Setup TV signal" it recognizes the signal as "Antenna", but he was not able to scan any guide or service.

  --------------------------

  7: Interestingly, it recognizes the USB TV Tuner, but to halfway through the installer it says 'You are about to leave the media center window to start the installation process for Tuner AVerMedia digital (DMB - TH)' and the rest of the facility would be in Chinese, where he asks me which City Chinese I am etc. and cause recognized as a bad country and DMB - TH no channels are available.

  --------------------------

  Could I please get a setting for help to the top of the window Media Center?

  Initially, I thought it was a problem with the driver, but it seems not to be because she works for the Avermedia program.

  Thanks for your help!

  Hello

  Thank you for you answer.

  I have already contacted Avermedia and they got back to me with a solution. However, they notified the problem with the interface in Chinese was the software design of the library window.

  Also, I think that DMB - TH is just how Windows Media Center recognized as, because it is a hybrid TV tuner so when I click on the driver he recognizes as DMB-TH/DVB-T so its fine.

  In any case, he now works correctly. It's a hybrid tuner, they asked me to install a program that allows me to switch between DVB - T and DMB - TH. So far it works well :)

  Thanks for your help.

• A necessary component of widows media center is not available. Please restart Media Center

  Original Windows Media Center title: Vista will not work.  Can not burn discs.

  Have Vista Windows Media Player and when I try to start it says. A necessary component of widows media center is not available. Please restart Media Center. Nothing happens! When I try to burn a disc, it says. A problem when burning the file to disk. For any additional help, click Help on the Web. Nothing happens.

  Hi Stephendoty,

  (1) in order to clarify, the error message appears when you start Windows Media Player or Windows Media Center?

  (2) since when are you facing this problem?

  (3) remember to make changes?

  Method 1: users have solved similar issue by following the steps outlined in the article below. You can run the fixit available in the link below

  When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank
  http://support.Microsoft.com/kb/925704

  (The section applies to Windows Media Player, described steps works great for Windows Media Center)

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• How to get video clips on windows media player? __

  I am doing a video on widows media player when I import video that it does not show on n video clips when I try to create in video clips, it does not work. What is the main problem and what to do about it?

  I am doing a video on widows media player when I import video that it does not show on n video clips when I try to create in video clips, it does not work. What is the main problem and what to do about it?

  ===============================
  Please provide more details... Windows Media Player
  has no options for video editing

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Error message "Windows Media Player is unable to extract one or more tracks from the CD" converting .cda to .mp3?

  I put the CD in the drive, choose "RIP CD" in widow Media Player, but the following message is displayed.

  "Windows Media Player cannot extract one or more tracks from the CD."

  What do do now?

  Hanna,

  Please contact the Microsoft Community.

  I wish that you look at the answers in these discussions-

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-Media-Player-cannot-rip-one-or-more-tracks/ec2a0651-e9ea-4ad9-8daf-5abf9e9e2035

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/unable-to-rip-audio-CD-using-the-media-player/93c279f7-89ae-4a7c-B7EA-fdc7785ed335

  We know if this helps you solve the problem.