AVG Internet Security maintains the 'blocking' Windows updates

I am running Windows XP Home SP3 on my machine. I recently pushed a rootkit/trojan infection. My AVG Internet Security v9 is running and updated very well... something which it did in a month because of the infection. My Windows Firewall and automatic updates are enabled. (Which is also disabled during infections). I went to the Microsoft site and downloaded/installed the critical updates 43 (the infection had turned off automatically updated). However all the time I download and install the updated my AVG kept popping up with a deadlock message:

'au.download.windowsupdate.com/msdownload/update/software/crup/2012/07_467626d3805abcce3d926b85d8928a20d5edc05b.exe '.

(I continued to close the notification window and download or install updates. Each of them went through).

My Windows security shield has an exclaimation point on this subject.

Is it is a sort of conflict between AVG and update of Windows?

Please HELP... it makes me craaaaazy since it appears every 20 seconds or so!

Thank you very much

LuniLadi

Anoop P K,.

Thanks for the suggestion on disabling the antivirus! I didn't turn off the whole program (which would be 'reisdent shield' on AVG). I have disabled the internet part (shield online) since it pops up constantly during the update downloads.

Sure enough... that did the trick. Updates downloaded and installed.

This part of the virus program is turned back on.

So far so good. Automatic updates seems to be to download and install without any interference of AVG Internet Security.

Thank you for taking the time to help.

Doreen

Tags: Windows

Similar Questions

  • Norton Internet Security and the latest Windows updates

    Why my Norton Internet Security 2010 product stopped chasing the latest updates Windows Automatic (9 total)?

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    See you soon.

    Mick Murphy - Microsoft partner

  • Cannot access Internet after installing the latest Windows updates

    Hello

    updated the last windows update and now can not access the internet even if I said I'm on internal appreciate any help in this matter.

    Have reset the laptop to an earlier date and no problem, but as soon as I download the update of windows, no internet access

    " Original title: blocked internet access"

    Hi Eugene,

    Thanks for posting your query in Microsoft Community.

    I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

    1. What is the type of internet connection you use - wired or wireless?
    2. Do you get any error message when there is no internet access?
    3. What is the number of KB of the update, after which the internet disconnects?

    [To view your history of update:]
    a. Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on parameters, typing or clicking on Change PC, then type or by clicking on update and recovery.
    [ b. press or click on see your update history.]

    The question could arise if the specific update makes changes in the Windows network properties and the update package has been damaged. Other important reasons include the firewall from the security software, third-party software conflicts etc.

    In order to diagnose the problem, I would suggest trying the following methods and check if the problem persists.

    Method 1:

    Method 1: Troubleshooting of connection Internet run.

    a. press the Windows key + W key on the keyboard.

    b. type Troubleshooting in the "search" tab and press enter.

    c. click show all on the left panel.

    d. click on Internet connection, will new popup window.

    e. follow the instructions on the screen.

     

    Let us know the results performing the Troubleshoot utility.

    Method 2:

    Reset the DNS and TCP/IP settings.

    1. Press the Windows key + X.
    2. Click prompt (Admin).
    3. Please enter the following commands and press ENTER after each one.
      NETSH INT IP RESET
      IPCONFIG/FLUSHDNS

    Restart the computer to check the issue.

    If the problem persists, refer to the following method.

    Method 3:

    Temporarily disable the security software and check if it helps.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most

    cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Additional information:

    Windows wireless and wired network connection problems

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • Cannot access internet after installing the latest Windows Update

    * Original title: Question access to the internet after you have installed the latest update

    Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

    I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

    I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

    Can you please tell how can I install the update it will affect my ability to access the internet?

    Hi Victoria,.

    Please help me with the following suggestions:

    1. using modern Internet Explorer user interface or Desktop Internet Explorer?
    2. your computer is in a cable or wireless internet connection?

    3. What is the number of the kb article that is causing the problem with the internet after installing the update?

    4. are you referring to Windows Update (KB2919355) 8.1?

    Windows Update: Frequently asked Questions see (how know what are updates
    been installed?)

    http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

    Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

    How to perform a clean boot in Windows

    http://support.Microsoft.com/kb/929135/en-us

    Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

    Method 2: Click on the link below to troubleshoot if the internet explore does not work:

    Why can't connect me to a network?

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

    Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

    I hope this helps. Answer please if you have any additional questions with Windows.

  • Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

    Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

    Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) during the validation in an IE specific forum or a newsgroup. Please do it in your next reply.

    By "The Internet began" do you mean that you encounter errors Page can not be displayed ?

    Updates have you installed just before this problem started? Have you installed an update of the third-party driver that is offered by Windows Update?

    TIP: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • problem Windows xp and avg internet security

    Program AVG Internet Security - AVG PC Tune Up - changed/corrupted my Windows Defragmenter program.  Before downloading the free version of this Tune Up program that I had always used the drive Windows Cleanup and Defragmenter programs. When I now try to defragment my files I get the following message when I try to analyse the "Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c). Please run Chkdsk/f.

    AVG 2 offer help options a) contact Microsoft) b computer restoration to date before you download Tune Up.

    Do not use my computer for anything else on internet purchases, store my pictures, my banking and the strange E-mail but does not want to resume a year.  All of the suggestions. I have disinstalled program AVG PC Tune Up months trying to make my computer run faster.  AVG informed me that my security bought 18 month program there is need the upgrade and that is why its doing all my programs so slow.  I don't have any computer talk or knows anything much about them (code of machine 20 years ago!)

    (a) contacting Microsoft won't help you
    (b) restore your computer won't help you

    The problem is your HARD drive has been marked "sale" and you cannot defragment a dirty volume.

    Your HARD drive may have been marked dirty of a power interruption, using the power button, pulling the plug, abnormal termination, aborted reboot, etc..

    You can query the dirty bit on a volume from the command prompt window.  Here's how:

    Click Start, run and enter in the box:

    cmd

    Click OK to open the command prompt window.

    For example, to query the bit of impurity on drive C, type this command:

    fsutil dirty query C:

    The sample output:
    Volume c is dirty
    Volume C: is dirty

    Type "exit" to close the command prompt window.

    No amount of order entry, no amount of editing the registry deletes the on a volume's dirty bit (sorry that Microsoft committed 'experts' Support Engineer)

    Only a chkdsk with error correction (chkdsk/r) can clear the dirty bit, and it might not work the first time.

    To run chkdsk/r, click on start, run and enter in the box:

    Chkdsk /r

    Click OK and the answer you want volume checked on next reboot (restart of course).

    This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

    When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you have chosen to do it yourself, the results appear in the viewing Application event log.  You should look there for the chkdsk log and no problems after running chkdsk.

    To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

    A shortcut to the event viewer is to click on start, run and enter in the box:

    %SystemRoot%\system32\eventvwr.msc

    Click OK to launch the event viewer.

    Search the Application log for an event originally by Winlogon, something like:

    Event type: Information
    Event source: Winlogon
    Event category: no
    Event ID: 1001
    Description:

    Checking file system on C:

    The type of the file system is NTFS.
    A disk check has been programmed.
    Windows will now check the disk.
    39070048 KB total disk space.
    25151976 KB in 78653 files.
    48256 KB in 10264 index.
    0 KB in bad sectors.
    237080 KB in use by the system.
    65536 KB occupied by the log file.
    13632736 KB available on disk.
    Windows has finished checking your disk.

    If you see errors - same errors that are corrected, run chkdsk /r again until you see no error.  You should have no errors.

    Check again the dirty bit.  Rinse and repeat if you wish.

  • AVG Internet Security and AVG PC Tuneup will cause problems after upgarding to Windows 10?

    Original title: AVG vs 10 widows

    I used AVG Internet Security 2015 and AVG PC Tuneup 2015.  They will create no problem if I install Windows 10 as a replacement for Windows 7 Home Edition? wouldn't be better to remove them?

    If you look at the AVG support community there is not a lot of issues with AVG and Windows 10 products and the few that you can read on are resolved quickly - usually with an AVG uninstall and reinstall (especially after the migration of the BONE).

    If you are migrating your Windows 7 to Windows 10 I think I would uninstall all AVG products if they don't get in the way, completed the transition from OS and then reinstall AVG products from scratch on Windows 10.  Some problems of AVG support are usually solved with uninstall/reinstall anyway.

    From the looks of the circulation in this Windows 7 community, you're more likely to have questions Windows 7 migration to Windows 10 (or try to go back) with AVG.

  • I want to activate the AVG internet security firewall.

    I use Windows 7 Ultimate. I recently installed a genuine copy of AVG internet security 2011, it of OK for the first days, but after a few days, has been disabled firewall AVG & windows firewall is enabled. I tried to move the AVG firewall, but could not succeed. Can someone help me? There could be a problem of setting. Tried a lot, but was of no use.

    Hi SunilSherekar,

    -What happens when you try to activate the AVG firewall? You receive an error message or error code? If Yes, indicate the same.

    When you encounter this problem with AVG, I recommend you post your request in the Support AVG forums to improve assistance in this regard.

  • I can't install the latest windows update. My error code is 0x800706BE.

    original title; I can't install the latest windows update.  I used Microsoft Fix It and still not able to install the update.  My error code is 0x800706BE.

    System information:

    Microsoft Windows XP Professional

    Version2002

    Service Pack 3

    Dell Computer Corporation

    Dell Dimension DIM4300S

    Intel Pentium 4 CPU 1.60 GHz

    1.59 GHz, 768 MB Ram

    Internet explore 8

    Norton Internet Security 2011 (updated)

    Hi ScottCarter,

    ·         Did you do changes on the computer before the show?

    ·         You are trying to install updates?

    ·         Are what fixit you referring?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

  • Even after you remove AVG Internet Security 2012 on computer, Microsoft Security Center says its execution

    removal of avg internet security 2012 and Security Center microsoft says that it runs. Help plez

    You have disabled AVG before you run the removal tool?

    You will also be able to stop AVG by disabling startup items.

    To identify what loads when you start using Autoruns (freeware from Microsoft).
     http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

    With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

    Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

  • removal of the old windows updates

    on my window vista home basic on disk-D computer were my new and find the old windows updates, I only 21.8 gigabits of 69.5 gigabites
    remaining. whenever I get windows updates and install them I have less memory remaining on this drive. my windows updates go all the way back to 2008
    When I bought the computer. Every month I do a backup on dvd. I don't store objects like photo, games or other long-term files.
    My question is it possible or safe to delete the old windows backup? I do a daily cleaning of windows.
    Is there anyone who can help me with this problem so I don't run out of space on the disc-D?

    Hello

    You do not remove the "old" Windows updates.

    If you do, you lose the performance and the improvements in security that they give and you put your computer at risk of breaking or be infected by malware...

    See you soon.

  • Norton Internet Security 2010 automatically close Windows Defender? __

    My set up:

    Windows Vista 32 bit Home Premium, Vista SP2

    HP Desktop

    Modem DSL Connection

    Norton Internet Security 2010

    I just installed Norton Internet Security 2010. I get a pop up notice of Windows indicating that Windows Defender is disabled. When I had Norton Antivirus/spyware 2008 (that I used until the installation of Norton Internet Security 2010) Windows defender was on, but not in real time.  Then, when I'd go to

    The Task Manager > click on the Services tab > click on the Services button in the lower right

    This will display a list of Services. I scroll down and find the Windows Defender Service

    It shows NOT on and manual start

    Before the instalation of Norton Internet Security 2010, it has shown as Started and startup type automatic

    Is this the right setting with Norton Internet Security installed? I do not use Windows Defender, but I read that the Windows Defender Service is responsible for other things in addition to anti-spyware scanning.

    So should I change the startup type?

    and start the service?

    Or, as I said if I don't use it. leave it alone?

    Q. "Norton Internet Security 2010 automatically closes Windows Defender?"

    A. Yes.  It uses its own antispyware software.  Having two different types will result in conflicts and compatibility issues.

    Carey Frisch

  • Driver Realtek NIC missing after the previous Windows Update on window Home Server 2011

    During the last windows update, I lost the Realtek NIC driver on windows home server 2011. If you do not have the backup, is the only way rebuild machine or there is another way to install the driver software.

    Hello

    Since the problem is specific to the window Home Server 2011, I suggest that the validation of the query on the forum link mentioned here.

    http://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

    They are a team of dedicated support, helping issues related to servers in the window of the House.

    Hope the information is useful.

  • Canon scan to folder (Server 2008 R2) from the latest Windows Updates (13 sep 2012) it doesn't work anymore...

    We have a few Multi functional Cannon, who were able to scan to folder to our file server 2008 R2 server.

    Since the latest Windows Updates (13 sep 2012) it doesn't work anymore...

    Nothing has changed for folders or shares. Actions are like:

    \\fs01\scans\IT

    Shared folder is \\fs01\scans

    Share permissions are full for everyone

    On the COMPUTER folder, only the service and the Canon scanner user have full conrol...

    When I turn off the firewall of Windows on the FS01, it works.

    Can I get a SMB = OK on the Multi functional.

    When I turn on the WIndows firewall, I get a SMB = NG on the multifuntional

    I checked the rules and everthing about file and printer sharing is allowed...

    Can someone please think about what to do?
    Because really don't want to go with Windows Firewall disabled.

    The Endpoint Protection 2010 Anti Virus is installed on the FS01, but given that disabling the Windows Firewall works, I don't think that the Anti Virus has nothing to do with it.

    Update: I tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! So there's something wrong with this one server... But as far as I can see, the firewall has all the file and open sharing of printers of things... And when I connect with the Canon Scan on a PC user I can browse places very well.

    Hello

    "Update: I just tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! "So there is something wrong with this one server.

    Microsoft has specific Forums to help you with your Server 2008 R2 questions.

    Could you please repost this link in Server 2008 R2 Forums.

    "Support for Windows Server 2008 R2"

    http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

    See you soon.

  • After the last Windows Update (04/27/11), my home group no longer works

    Original title: homegroup after Windows Update failure

    After the last Windows Update (04/27/11), my homegroup is no longer in effect.  That's happened?

    I have Windows 7 Professional Version 6.1 Build7601: Service Pack 1 on both machines.

    The resolution of the problems of the residential group has done several things, but that did not help.

    What works removed one of the machines on the network for several hours and then reconnect to the network.  Don't know why?

Maybe you are looking for