AVG warned me that the memory usage is very high and I have to restart.

Similar Questions

• I can't get the update of windows to run. I get an error message that says that the update service does not work and I have to restart my computer.

  I am running Vista on a 64-bit computer.  I don't know with certainty how current I am, because as a problem earlier, but different, brought me back to earlier restore versions.  I checked the Services and confirmed that the Windows Update service is started.  I restarted my computer and the problem persists.

  Is there a file that might have something in it that shouldn't be there or I'm probably deal with a corrupt program?

  Hello

  You can reset the Windows components and see if it works fine.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

• Message tells me that the memory usage has been 75%

  Hello

  I get (once a week) a message Bublé Tosh saying my memory usage average during the last 7 days was 75%.
  Should I be worried?

  I have 1014 MB and I don't exactly tell me a power user!

  Thanks for any help.

  Nick

  Don t think that there could be a problem is only a windows Vista notification message that informs you about the State of laptops OS.

• Please think when the memory usage is too high.

  Hi all

  My version of Oracle is 11.2.0.4 64-bit

  And Linux version: SUSE Linux Enterprise Server 11 (x86_64) SP3.

  Use of memory on the server is too high.

  AP - GV - SP713:orasop 55 > free t m

  total used free shared buffers cached

  MEM: 258341 257482 859 43775 8 219455

  -/ + buffers/cache: 38018 220322

  Swap: 65535 3919 61616

  Total: 323877 261401 62475

  AP - GV - SP713:orasop 56 >

  Top of PAGE process 10 consuming the most memory is below -.

  AP - GV - SP713:orasop 56 > ps to the | Sort - nk + 4 | tail

  orasop 15385 3.7 0.0 30937152 9916440?    SS Nov23 01:40 ora_dbw2_SOP

  orasop 15408 3.7 0.0 30933376 9809912?    SS Nov23 01:39 ora_dbw5_SOP

  orasop 35335 3.8 0.6 30932204 10316356?   SS 04:32 03:00 oracleSOP (LOCAL = NO)

  orasop 7121 3.8 0.1 30932164 10296904?   SS Nov24 01:51 oracleSOP (LOCAL = NO)

  orasop 10997 3.9 0.3 30928188 10457696?   SS Nov24 03:34 oracleSOP (LOCAL = NO)

  orasop 15371 3.9 0.0 30937024 10399132?   SS Nov23 01:44 ora_dbw1_SOP

  orasop 7216 4.7 0.8 30929072 12475216?   SS 05:08 03:55 oracleSOP (LOCAL = NO)

  orasop 14793 5.0 0.6 30940416 13390616?   SS Nov24 06:29 oracleSOP (LOCAL = NO)

  orasop 18524 5.0 0.7 30928112 13329416?   SS Nov24 07:08 oracleSOP (LOCAL = NO)

  orasop 31019 11.2 5.9 30926108 15609268?   RS 06:14 42: 21 oracleSOP (LOCAL = NO)

  AP - GV - SP713:orasop 57 >

  In the oracle memory setting is:

  SQL > select decode(pool,null,name,pool), round (sum (bytes) / 1024/1024,4) MB in Group v$ sgastat by decode (pool, null, name, pool) order by 2 desc;

  DECODE (POOL, NULL, NAME, POOL MB

  -------------------------- ----------

  BUFFER_CACHE 15360

  Shared pool 13952

  pool of Java 448

  log_buffer 56.9688

  fixed_sga 2.1634

  Please suggest if the memory must be increased and also I see a dynamic memory management is not turn on on the server.

  SQL > show parameter sga_target

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  SGA_TARGET large integer 0

  SQL > show the memory_target parameter

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  memory_target large integer 0

  SQL >

  SQL > show parameter sga_max_size

  VALUE OF TYPE NAME

  ------------------------------------ ----------- ------------------------------

  very large integer SGA_MAX_SIZE 29952 M

  SQL >

  Please suggest.

  Thank you before acting.

  Concerning

  Jean Louis

  Yvon says:

  Please check the error of the alerts log when the database is set automatically.

  WARNING: VKTM detected a drift of the time.

  Time derivatives may cause unexpected behavior, such as wait times. Check the file path for more details.

  Mon 23 Nov 20:41:17 2015

  Closure of proceedings (immediate)

  Closure of proceedings: in addition to logons disabled

  Stop background MMNL process

  MMON background process stop

  The high waters = 53 license

  ALTER DATABASE CLOSE NORMAL

  ORA-1507 marked during: ALTER DATABASE CLOSE NORMAL...

  ARCH: Disabled archives due to the stop: 1089

  Stop process to archive

  Archiving is disabled

  ARCH: Disabled archives due to the stop: 1089

  Stop process to archive

  Archiving is disabled

  Mon 23 Nov 20:41:20 2015

  Stop background VKTM process

  Mon 23 Nov 20:41:22 2015

  Instance shutdown complete

  Concerning

  Jean Louis

  I say that DB was reduced by human intervention based on below

  Accident never issue SHUTDOWN IMMEDIATE

  After the accident alert log shows DB followed by BOOT messages running.

  > Closing instance (immediate)

  Problem exists between keyboard and Chair only.

• Receiver "warning message" that the photos could not be found and that it will not be included, when sending emails with photos?

  Original title: How can I include pictures when I send an email?

  Sometimes when I receive an email with images embedded in the e-mail message, if I send the email, the text is passed, but where the photos were in the original message, there are empty spaces or perhaps some identification confusion of where a copy of the projected image can be kept (I think - not sure). Sometimes when that happens, I get a message "warning" that the photos could not lies and will not be included.

  

  I tried to paste a copy of the warning above - no luck with that either.

  HELP please.

  Hi Bill,

  1 are you facing the question with any specific email account?

  2. the problem occur only when you transfer emails with photos?

  3. What is your default browser?

  4. you see a red "X" instead of a picture on Web sites also?

  Some of the sent emails will not include images when you transfer them again. You can should forward the e-mail as an attachment or, save the images to your system first and then try to attach the photo and forward the message.

  You can also check with your email provider to see if there is an option for "include images with messages" that must be activated.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• The SQL Developer memory usage is very high + session monitor work not

  Hello
  I'm facing 2 problems with SQL developer tool.
  
  (1) high memory usage (about 160 MB).
  (2) when I click on tools-> monitor sessions, session related window opens upward.
  
  I use 1.5.4 version. Please let me know if there are fixes for these issues.
  
  
  Thanks

  Hello

  (1) not much help for you, but for me, 160 MB is not excessive use of memory for SQL Developer (mine is currently sitting at around 150 MB). And then, I have been using the tool for a while and have a lot of memory on my computer.
  (2) tools > Sessions of the monitor works fine for me (DB 10.2.0.3). Do you get an error message when it "does not open upward? Which version of DB are you using? If you go through the browser reports (see > reports if it is not already displayed) and select Data Dictionary reports > Database Administration > Sessions > Sessions, does it report?

  theFurryOne

• After upgrading to Windows 7 SP1, the memory usage is abnormally high

  After updating my laptop for Windows 7 SP1, the amount of memory is abnormally high. Before SP1 idle memory was around 2 GB after updating slowed uses 5.3 MB of my 6.1 MB in total. It is originally the laptop overheating and having problems. There is no virus present analyses of Security Essentials and Spybot doesn't show anything. The Task Manager does not any abnormal process, and no process using an abnormal amount of memory.

  Hi KnitGnosis,

  Have you seen this article?  Looks like it may solve your problem:

  http://support.Microsoft.com/kb/2505348

  I hope this helps!

• Computer says disk C and F are weak and memory Windows is very low. and I have the same thing in so many programs.

  I have windows xp home edition, he received from a friend. Tells me disk C and F are close to full. Make cleaning disc, but not enough. AND says the window is very low on storage space. Don't know what to delete and keep programs are

  http://Windows.Microsoft.com/en-us/Windows-Vista/preventing-low-memory-problems

  Read what you and answer a few questions about your system:

  1. What is your current antivirus?

  2.

  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  You can change the personal information.

  3. look in disk management, how many partitions? How much free space on each?

  4. optimize your pc:

  Stanley Zhang tips

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• I have downlaoded FF5 and it has not loaded. Now he tells me that a previous FF must be initialized and I have to restart my PC. I tried and it does not help. How to break this vicious circle and get a clean download?

  I tried to download FF5. Everything seems to happen when I run the downloaded file. Then I got the answer I needed to reboot the system to complete the installation. I tried several times, and whenever I try to launch FF5 I get the same message, but no FF5! SO WHAT DO I DO NOW? I tried to download FF6 and still get this bloody message.

  Check in the Task Manager and verify that firefox.exe in the Task Manager. Or install firefox by changing the destination folder.

• withdraw the authorization allowing you to monitor the memory usage

  I now often have either force quit, restart and started having panic 'of the core"since I agree allow Firefox CPU usage monitor. I'm still on OS X 10.6.8 on my Mac. I got no problem with anything since installing this OS X.

  However, from time to time with the latest Firefox 7.0.1 installation I think the program or my computer 'blocks' and seems unresponsive. I left active Firefox and resident on my computer last night and once again, everything will be inadmissible. I opened the monitor activity and noticed that Firefox was consuming 283 MB of real memory (now 298,6 MB) and I have this one open another tab for the Seattle Times. I withdraw my permission to allow Firefox to watch my memory usage and need to know how to delete the cookie or what ever that governs)

  Go to Firefox > Preferences > advanced > general tab and uncheck the box "send performance data" more information here.

• QNetworkAccessManager limiting the memory usage when no head

  I have a long application works without head that downloads files from 6 MB upwards on a web server. Now using QNetworkAccessManager to view the file, I see the memory usage, pull up and soon to exceed the limit of 3 MB.

  The QNetworkAccessManager then suffers bad allocations and crashes.

  I was hoping would be sort of the QNetworkAccessManager chunk the data of the file on the disk and keep low memory footprint, but it seems he is trying to remove all of the file.

  All means to limit or control the behavior of the QNetworkAccessManager?

  See you soon

  Paul.

  Hello.

  We started an internal investigation to verify the QNetworkAccessManager implementation.  A suggestion to try next was to try using libcurl to perform the download of files.

• Check the memory usage

  I tried this code to display the memory usage. Running in the Simulator appears that zeros?

  public class checkmemory implements Runnable
  {
  String ID = "checkmemory;
  String ModDate = "20111103";
  installation program. Setup _Setup.
  int alloc;
  free int;
  int objects;
  int objectsize;
   
  public checkmemory()
  {
      
  }
  public void run()
  {
  _Setup is new installation. Setup();
  Memstat MemoryStats = new MemoryStats();
  ID = memstat.getAllocated ();
  free = memstat.getFree ();
  objects = memstat.getObjectCount ();
  objectsize = memstat.getObjectSize ();
      
      
  HandleAlert (_Setup.Error, "alloc:" + Integer.toString (alloc) + "free:" + Integer.toString (free) + "object:" + Integer.toString (free) + "objectsize:" + Integer.toString (objectsize), "0");
  }

  Solved.  Code modified to:

  ID = Memory.getRAMStats () .getAllocated ();
  Free = Memory.getRAMStats () .getFree ();
  objects is Memory.getRAMStats () .getObjectCount ();.
  objectsize = Memory.getRAMStats () .getObjectSize ();

• ESXi 4.1 - Question about the memory usage

  Hi all

  I am currently in the process of migrating from ESX 3.5 and ESXi 4.1.0 everything by making the upgrade of my equipment (3 x HP DL380 G7, 24GO RAM, CPU Intel X 5660 2 each).

  The boxes are installed with ESXi 4.1.0 Build 384481 and hpq - esxi4.1uX - bundle-1. 0a, hardware monitoring is done using HP SIM (V6, Windows).

  What bothers me, however, is that the VSphere Client (4.1.0 Build 345043) reports steadlily increases the memory usage in the Summary tab. The increase varies according to the system, ranging from 98MB in 1848 MB in the last 3 days, continues to grow.

  During this time the performance tab reports consumed memory exceeds granted memory.

  Everyone saw this behavior, too? Is this normal or am I facing a memory leak here?

  Thanks in advance.

  Kind regards

  SilentGuy

  good no worries. Here's the jsutification who might come to our rescue.

  the reason to ask to the image is to understand tips on different time and or prabably model.

  officers of 3rd party as HP may be one of the reasons for these behaviours and this pumps memory when they perceive newspapers. I think it's side normal use would normally not go beyong 2000 MB for an esxi normal opertaing without no VM

  I suggest you to watch more than two days and see if it grows even more...

  hope this helps

• Monitoring the memory usage on iOS using the Stats class

  I was check memory usage on an application I'm developing for iOS using Stats class https://github.com/mrdoob/Hi-ReS-Stats ( http://help.adobe.com/en_US/as3/mobile/WS4bebcd66a74275c3-315cd077124319488fd-7fff.html#WS 948100b6829bd5a61637f0a412623fd0543-8000).

  I added the class Stats to my project and redeployed and, Ouch, reported in Stats memory usage ramp upward (quite slowly) even when there is nothing going on in the application (just displaying a loaded bitmap).

  To try to find the question, I created a project with a test class that extends Sprite with just this single call in the constructor: -.

  addChild (New Stats());

  I have deployed to the device to check that he didn't swallow all of memory.

  But I was surprised to observe the use of the memory to crawl upward and upward (to 5) before kicking in some garbage and takes memory down. I left it running and then he slipped once again more than 7.5 this time before being deported back down to just below 3.

  So 2 questions that I would be grateful any feedback/comments/thoughts on related: -.

  1 is this normal (i.e. memory creeping up when there is nothing else than to the Stats in the project)?

  2 - What is the best way to monitor the memory usage in an application? Good enough stats - is Stats itself causing the memory usage?

  All the best guys!

  See also thread (http://forums.adobe.com/message/4280020#4280020)

  My conclusions are:-

  -If you run an application and let idle, use memory slips gradually upward (probably in memory is used to perform the Calc/refresh the display, etc.)

  -Periodic garbage collection occurs and memory is brought back down

  -This cycle could be more than 5 min.

  Work with your real application and memory will increase and be published much more quickly/regularly.

  -It's probably worth making an initial check running on your desktop computer to smooth out all the initial problems

• How to check the memory usage of cash L2?

  How can I check if my processor uses cash L2 memory?
  How to activate it?
  How to know how much it is?
  My laptop is satellite MX30-113.

  Hello

  Unfortunately I can't tell you much, but I found an interesting tool for editing memory. He called the Elcor V3.3. If you wish, you can see all the features of the tool. Maybe it will give you more information on the memory usage.