Avira Antivirus Premium 2012 keeps returning (fake?) positive for the horse of Trojan TR/tr/dropper.Gen
Avira Antivirus Premium 2012 retains its positive (fake?) back to TR/tr/dropper.Gen Trojan. Avira gives me the ability to clean the file, I always accept, a scanner and then closes. In a few hours (or minutes), there comes another plus (fake?) for TR/tr/dropper.Gen.
I have to temporarily disable direct protection to use my MS Word which is annoying and dangerous.
To get a second opinion, I have downloaded and run the MS 1.0.3001.0 Security Scanner that was able to detect viruses, spyware or potentially unwanted software on my system (running Windows XP).
Any ideas?
Hello
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.
No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.
TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684
Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_free
SuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE
Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)
Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
also install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->-->
Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
Try the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro
--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htm
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1
--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
RUN - type in the box-
sfc/scannow
Then run checkdisk (chkdsk).
RUN - type in the box-
Chkdsk /f /r
-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
================================
For extreme cases:
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp
================================
If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.
Microsoft support - Virus and Security Solution Center
http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
Tags: Windows
Similar Questions
-
I have a question about the delivery of the school for creative cloud. If I start paying $19.99 a few months before that I control, I keep getting this price for the rest of the year? Or will I stuck having to pay $50.00 per month until the contract is in place?
Student discounts are good for a full year, without worrying if you drop out during this period.
Mylenium
-
Return to statements for the Adobe Edge
Hello
I solved this part of the animation that allows 1 single movable element in an area capable of receiving at any time. Apply it to all movable items now. However, I feel a kind of problem right now.
I can drag elements around. but now, I can only drop an element in both integers droppable. The rest of the elements to be will return to its original position without even first fall.
I also put a reset button on the stage, but I don't know why it will not appear even if I tried to change its position on the column 'Elements '.
This is my file so far, a link: https://www.box.com/s/5a0dsq29upy2wtatxmyb
This is a snippet of my code that can work for the 1st element draggable.
() yepnope
{
Nope:]
"js/jquery-ui-1.9.2.custom.min.js,"
"js/jquery.ui.touch-punch.min.js,"
'css/jquery-ui-1.9.2.custom.min.css '.
],
full: init
}
);
function init() {}
var point = sym.$("Stage");
var animalArray = new Array();
DRAGGABLE. case1, _2
_2 var = sym.$("_2");
_2.CSS ("position", "absolute");
_2.draggable ({disabled: false});
_2.draggable ({containment: Stadium});
_2.Draggable({)
Snap: ".target1."
snapMode: 'Center ',.
BACK PART 1
back: "not valid."
stop: function() {}
$(this) .draggable ('option', 'return', 'disabled');
}
});
animalArray.push (_2);
DROPPABLE
position 1 var = sym.$("position1");
position 1. CSS ('position', 'absolute');
position1.droppable({)
BACK PART 2
greedy: true,
accept: ".allcases."
Drop: function (event, ui) {}
Console.log (IU ['draggable']. EQ (0) .attr ('id'));
BACK PART 3
If ($('.filled').length < 1) {}
var draggedElement = ["draggable"] .eq ui (0).attr('id').replace ("Stage_", "")
Console.log (draggedElement)
for loop
for (var i = 0; i < animalArray.length; i ++) {}
var element = animalArray [i].attr('id').replace ("Stage_", "")
if(draggedElement == Element) {}
animals change width and height on down here
animalArray [i] .css ('width', '75px');
animalArray [i] .css ('height', '75px');
RETURN TO PART 4
$(this) .append ("< div class =" filled"> < / div > ')
}
}
} else {}
UI. Draggable.Draggable ('option', 'return', true);
}
}
});
//---------------------------------------------------------------------------------------- ----------------
and here are the codes that do not work
DRAGGABLE. CAS2, _5, position2
_5 var = sym.$("_5");
_5.CSS ("position", "absolute");
_5.draggable ({disabled: false});
_5.draggable ({containment: Stadium});
_5.Draggable({)
Snap: ".target2."
snapMode: 'Center ',.
BACK PART 1
back: "not valid."
stop: function() {}
$(this) .draggable ('option', 'return', 'disabled');
}
});
animalArray.push (_5);
DROPPABLE
position2 var = sym.$("position2");
position2. CSS ('position', 'absolute');
Drop it in position2
position2.droppable({)
BACK PART 2
greedy: true,
accept: ".allcases."
Drop: function (event, ui) {}
BACK PART 3
change the length?
Orig: if ($('.filled').length < 1) {}
If ($('.filled').length < 6) {//other elements will still be stacked above it.
If ($('.filled').length < 10) {//other elements will still be piled on him but I am able to drop the 1 e element
If ($('.filled').length < 50) {}
var draggedElement = ["draggable"] .eq ui (0).attr('id').replace ("Stage_", "")
for loop
for (var i = 0; i < animalArray.length; i ++) {}
var element = animalArray [i].attr('id').replace ("Stage_", "")
if(draggedElement == Element) {}
animals change width and height on down here
animalArray [i] .css ('width', '75px');
animalArray [i] .css ('height', '75px');
RETURN TO PART 4
$(this) .append ("< div class =" filled"> < / div > ')
}
}
} else {}
UI. Draggable.Draggable ('option', 'return', true);
}
}
});
end of codes.
There are more elements of course, if you download the file from the link above.
I hope someone can help me. Thank you very much
See this discussion: post #10.
-
My mac mini crashes several times a day. I have collected several Console logs when the accident took place (see below for more details). It seems that the problem is:
"No directory for the bundleID element: com.apple.cloudd.
I'd like to find out program that is causing the computer down (full machine reboots)? How can I solve this problem?
A few details...
= Presentation of the material =.
Model name: Mini Mac
Model identifier: Macmini7, 1
Processor name: Intel Core i5
Processor speed: 2.6 GHz
Number of processors: 1
Total number of cores: 2
(By heart) L2 Cache: 256 KB
L3 Cache: 3 MB
Memory: 8 GB
Boot ROM version: MM71.0220.B03
Version of the SCM (System): 2.24f32
Serial number (System): C07NT9MAG1HW
Material UUID: FDCB795C-A2BF-5D6D-94F3-F98871A90B89
= NEWSPAPERS FOR EXAMPLE 1 =.
Crash at 07:22 (screen displayed this time on the clock at the time of the accident)
30/11/15 7:16:03.742 PM DashlanePluginService [29307]: iextension: here?
7:19:40.671 30/11/15 PM firefox [21134]: set intl.ime.nstextinput.enable to true in: config to the difficulty of entry.
30/11/15 com.apple.WebKit.WebContent [22900 7:20:37.499 PM]: ignoring controlTimebase defined by customer, because AVSampleBufferDisplayLayer has been added to a Synchronizer
30/11/15 com.apple.WebKit.WebContent [22900 7:20:45.263 PM]: ignoring controlTimebase defined by customer, because AVSampleBufferDisplayLayer has been added to a Synchronizer
7:20:55.956 30/11/15 PM firefox [21134]: set intl.ime.nstextinput.enable to true in: config to the difficulty of entry.
30/11/15 7:25:11.064 PM distnoted [271]: time absolute # distnote proxy server: time civil 102.815157338: Mon Nov 30 19:25:11 2015 pid: 271 uid: 504 root: no
30/11/15 7:25:12.403 PM nsurlsessiond [281]: no directory for the bundleID element: com.apple.cloudd
30/11/15 7:25:13.712 PM ReportPanic [280]: unable to connect (panicHeaderLabel) out of (ReportPanicAppDelegate) (NSTextField): missing setter or instance variable
30/11/15 7:25:13.712 PM ReportPanic [280]: unable to connect (panicMessageLabel) out of (ReportPanicAppDelegate) (NSTextField): missing setter or instance variable
30/11/15 7:25:13.712 PM ReportPanic [280]: unable to connect (reportButton) out of (ReportPanicAppDelegate) (NSButton): missing setter or instance variable
30/11/15 7:25:13.715 PM ReportPanic [280]: ReportPanic cannot stat /Library/Logs/DiagnosticReports/Kernel_2015-11-24-214348_kelley2015s-Mac-mini.p anic
30/11/15 7:25:14.324 PM pboard [292]: try to break the link previous memory shared when starting returned an error. Continue...
= NEWSPAPERS FOR EXAMPLE, 2 =.
Crash at 08:55 (screen displayed this time on the clock at the time of the accident)
8:54:09.088 26 11 15 PM QuickLookSatellite [4488]: could not get the extension of sandbox for path=/Users/family/Library/Caches/com.apple.quicklook.satellite. Errno:1
8:54:09.088 26 11 15 PM QuickLookSatellite [4488]: could not get the extension of sandbox for path=/Users/family/Library/Caches/com.apple.quicklook.satellite. Errno:1
8:55:10.785 26/11/15 PM firefox [326]: set intl.ime.nstextinput.enable to true in: config to the difficulty of entry.
8:57:58.043 26 11 15 PM distnoted [266]: time absolute # distnotete proxy server: time civil 114.108837760: Thu Nov 26 20:57:58 2015 pid: 266 uid: 504 root: no
8:58:04.336 26 11 15 PM ReportPanic [271]: unable to connect (panicHeaderLabel) out of (ReportPanicAppDelegate) (NSTextField): missing setter or instance variable
8:58:04.336 26 11 15 PM ReportPanic [271]: unable to connect (panicMessageLabel) out of (ReportPanicAppDelegate) (NSTextField): missing setter or instance variable
8:58:04.336 26 11 15 PM ReportPanic [271]: unable to connect (reportButton) out of (ReportPanicAppDelegate) (NSButton): missing setter or instance variable
8:58:04.421 26 11 15 PM ReportPanic [271]: ReportPanic cannot stat /Library/Logs/DiagnosticReports/Kernel_2015-11-24-214348_kelley2015s-Mac-mini.p anic
8:58:04.426 26 11 15 PM nsurlsessiond [272]: no directory for the bundleID element: com.apple.cloudd
These must be run as administrator. If you have only one user account, you are the administrator.
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSIS AND diagnostic USE information reports ▹ System
(not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.
If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.
In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "
Please do not post other types of diagnostic report.
I know that the report is long, perhaps several hundred lines. Please report all this anyway.
When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
return on investment for the profile line variable
Hello
I built a vi with vision assistant, where the profile of a single horizontal line is included. If the acquired image had the X, Y coordinate system, I want to extend the vi so that it updates all possible horizontal lineprofiles (X 1/Y0 to X 1/Yn) line (Y0/Xn to Xn/Yn) in this order. So I have to vary the return on investment (line), but how is this possible? I have no experience in labview, so it's hard for me with the data of different types and functions.
Thanks for help
Hi Blue12,
You may not need to create a return on investment for each line. You can get information on line directly with "IMAQ-profile line. You can directly enter the coordinates of your line and out of the profile.
Please save yourself frustration and get LabVIEW training before attempting to implement applications.
Best regards, Topper
-
How can I return my office for the settings I already had?
I started my system one day, and all my icons were giant sized. I was jacking with the settings for the days trying to return them to normal.
I started my system one day, and all my icons were giant sized. I was jacking with the settings for the days trying to return them to normal.
If you have bees 'jacking with the settings for the days', it is difficult to know what you could have done, but here are some things that might help.
1. right click on an empty area of the desktop, then select Properties.
2. click on the settings tab
Set the resolution to a higher value by dragging the slider to the right. It will be very small.
Click the Advanced button, and then make sure the DPI setting is 'Normal '.
3. click on the appearance tab, click the Advanced button
Select the icon in the drop-down list and adjust its size. Take note of the emphasis that you change. -
new fake serial for the product key in order to activate the non-visible product
The starting point, it's that I want to install Acrobat 7.0 Standard (which, so far, works well in Win7 XP box) on my new Win10-Sytem.
Installing from the CD worked - and (surprise) it is works on Win 10!
But: I can not activate it with the original serial number.
So: earlier I had this discussion (which is now closed...):
I want to inform that the key to this series is for Acrobat 7 and Adobe no longer support this product so in order to help you I provided a link so please click on this link:Download Adobe Acrobat 7 and Adobe Creative Suite 2 products
Then sign in to your Adobe account, then you must select your product form there and also you will find the new dummy series for the product key in order to activate the product, please, do not use your product serial key
Well: the download of the installation file has worked, but I can't find the new dummy series for the product key in order to activate the product in my account. Again there is the OLD and no keys work.
So, please: where can I find the fake serial key?
You are welcome
-
View 6 does not support the 2012 server as a host for the connection to the server operating system
If I do some preparation work for a view upgrade 6.0 (from 5.3). After skimming the documentation on the operating system for connecting servers, I notice that Server 2012 is not supported, but Server R2 2012 is.
I can get it for the installation of "resolution of compatibility issues" for the installer, but rather, I don't throw a facility "not supported" in the production.
Does anyone know the reasoning/logic behind this?
Most clients use the R2 versions, it's the fundamental reason.
The smaller support matrix, faster than we can make good QA on the targeted OS versions and this means that we can release the software more quickly.
Linjo
-
setting the positions for the fixed field elements
Hello
I have a form that several elements on the position of the column 1, 2 and 3. One of the elements is a text box, surrounded by fields of normal text on the position of column 1.
The problem im having is I want the length of the text box to span more than two columns (resizing), but in doing so it moves the other elements on the page, making it very broad :-(
Any help will be appreciated.
Kind regardsPirate wrote:
I have a form that several elements on the position of the column 1, 2 and 3. One of the elements is a text box, surrounded by fields of normal text on the position of column 1.
The problem im having is I want the length of the text box to span more than two columns (resizing), but in doing so it moves the other elements on the page, making it very broad :-(
This seems to be a use case attributes , such as the colspan to order form available. The element of page stop and start of the HTML Table layout may also be of interest.
See + {: identifier of the thread = 2199163} + for a pretty laborious effort to solve what looks like a similar problem.
If it is not the same problem, you need to provide a detailed description of the problem, preferably to reproduce the problem on apex.oracle.com and include the following information:
- Full version of APEX
- Edition and the full version of DB
- (EPG, SST or APEX listener) Web server architecture
- Browser (s) and version (s) used
- Theme
- Model (s)
- Region/item (s)
-
Satellite Pro A60, keeps returning to start towards the top of the screen and wont start
My A60 PC refuses to boot.
It was working fine when a blue screen came with random lines streaming to the bottom of the screen, the style of the matrix, and then he stopped. When I try to turn it on, turns on the screen "in touch with tomorrow", but the images and the text are... kind of distorted pixelated, and I know it's not a flaw with the monitor.
A second or two later, the screen comes up asking me if I want to start... ' Safe mode ' "Safe Mode with network" 'know last Configuration... '. "etc. No matter which option to choose, the screen just white out for a few seconds, then returns to the distorted "in touch with tomorrow" screen and everything starts all over again.I tried to remove the battery, to no avail... I thought that always worked with electronics!
I have all the important files saved on a USB key, so solutions that involve losing the data very well.
Thank you!Hello
How do you know that it is not defect with monitor? Have you tried testing with external monitor?
Anyway, if you can't boot your laptop select Safe mode the best solution for me is to make the clean OS install. Your important files are backed up and you don't have to be worried about losing important information.
-
I decided, after all the trouble I had with Vista and go back to the factory settings and lost my last two years of my university studies to upgrade for students out of windows 7.
It was great to have a student, discount but it was provided in a professional and my Vista is running with Home Premium.
I bought without really noticing the difference. Before to do anything it can either, it work and if I can't have a refund or ask for windows 7 Home Edition premium to be provided with the offer student?
Hope you can help. Because of the beginning of return to college next week and have files on the office ready and waiting to install.
See you soon
Hello RachieW1975,
This theme has supported Windows 7 Upgrade paths.
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
Unfortunately, Microsoft only supports upgrades from Vista Home Premium to Windows 7 Home Edition Premium and Windows 7 Ultimate edition.
Windows Vista (SP1, SP2) Upgrading to Windows 7 Company
Professional, company, full
Enterprise
Enterprise
Home Basic
Home Basic, Home Premium, Ultimate
Home Premium
Home Premium, ultimate edition
Ultimate
Ultimate
-
Bridge not remembering last Position for the side panels?
The side panels in Bridge CS6 will not remain at the last position value when I close? I thought that it was a case of bridge don't close don't properly during the shut down Windows (7). I then tried to fix the side panels to where I only they and returned file > exit to close the bridge correctly and when I run it still lacks the right position. Doesn't he remember this and how can I change this?
Here is a screenshot of what I call the side panels: http://screencast.com/t/QDZGNCPp (The Red arrows are pointing side panels).
If you must start that Bridge to the launch has allowed closing the procedure should work.
Have you tried to set your panels where you want and then registering this as a workspace?
-
Position for the ISE customer strategies
Hello!
Anyone know how to configure Cisco ISE Posture policy to check windows Service Pack? For example, we need create a strategy to check if the machine has an Antivirus and the latest service pack installed. Policy for antivirus, it's simple, but we do not know how to set up for verification of Service Pack.
Thank you!
Policy > policy elements > conditions > pose > status of the registry
- pc_W7_SP0
- pc_W7_SP0_int
- pc_W7_SP1
- pc_W7_SP1_int
Those who use or duplicate and modify according to your needs.
-
The menu buttons changing size and position for the navigation of the site.
Hello world.
The menu buttons appear fine in preview mode, but as soon as I download on Business Catalyst all going PEAR - buttons decrease in size and change position!
I tried everything I can think of, including the re-doing the menu from scratch and upload whenever I make a change. Whenever I duplicate the menu on another page is when the problem occurs, but as I said that's no problem at all in preview mode browser.
The site link is: home
I would appreciate your help, its driving me crazy I have to show to the client as soon as possible
Thank you very much
I've been clicking since the menu buttons and a few times, but always without strangely shaped or placed images.
I think you can be assured that this is just a bug in your browser, probably some old picture caching that is too persistent to get deleted automatically. Refresh your page or clear the cache of your browser manually. That could help.
-
After that I upgraded my Mac OS to 10.10, PhotoShop was no more working. The rest of the Adobe design Premium CS5.5 programms were still working. To resolve this problem, I have re-installed PS now it works, but only in the trial serial number of "Adobe design Premium CS5.5 ' is not valid. No idea how to solve this problem. Adobe customer service can't help. When I installed Adobe design Premium CS5.5, initially, I had the same problem with Acrobat ProX; to make it work, Adobe had to provide me with a number of additional series for this program.
Hi Andreas,
Please visit: https://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html
I hope this helps.
Concerning
Megha Rawat
Maybe you are looking for
-
Windows product Wizard install and hp has hung up. How can I erase this?
I keep getting the error message "the component as you try to use a network resource that is unaviable ison. "Unable to install printer, seems windows install and the hp product Assistant" is hung up. How to fix?
-
(Redirected) I paid for the service the customer want what I paid for
I give the floor every time I get the guy who has the second he intends to win 10 does nothing, he told me to come back to win 8.1. Does this sound logical to you? I paid the cash for support of 2 years and now everything what they have to say is go
-
Motherboard fried; replaced, but the OEM disks don't reload Windows Vista
How can I do or what number to call to get reloaded Vista. I have two computers even. HP Pavilion a6300f. Both are about 2 years old and all original. In November 2009, the motherboard on one of two computers went wrong. In December, the other m
-
McAfee security center updates. The event log shows no signature of threat.
McAfee security center updates. The event log shows no signature of threat. That it states that I am protected I never had any "alerts" from him. Anyone know if it's OK or a way to check it out. The following is in the event log Log name: Application
-
What are the official names of the parts of the window of Windows 7?
I searched the official help files, but they don't show a picture of Notepad and talk of the title bar and the bar of menu etc. I suppose it's useful for * Notepad * and many other applications that not much has changed... But I want to know the det