Avira scanner gives error software exception error
I have Vista and IE8.
Recently, I uninstalled Mozilla Firefox. I then downloaded last June 2011 updates to Windows Defender, and then I updated the Avira anti-spware for June, which is a new version of Avira.
I then went to scan with Avira and analysis goes 95% complete and then I get an error message that interrupts the scan and says "error exception 0xc0000409 software at 0x684a276e.» Receive this message although Avira is allowed to run with the Windows Firewall.
Went to add/remove programs and selected 'Edit' to solve the problem. After a series of changes with the scan Wizard, I still get the same message on the avira scan (exception error software 0xc0000409).
This means a lot of time. I spent the last week trying to solve this problem.
Y at - there anyone out there that has a solution. It was not until I've updated, Windows Defender and Avira.
Thank you in advance for any help you can give.
Best,
I would contact Avira. It seems to happen from time to time; See the example of the enemy
http://Forum.Avira.com/WBB/index.php?page=thread&ThreadId=127508
Tags: Windows
Similar Questions
-
When I turn on my Lenovo L512 this message appears.can someone tell me what is happening in my computer? I can't find the location and I can not find software that might be bothering me. does anyone know how to stop this message from appearing.
Original title:The exception unknown software exception (0 x 40000015) occurred in the application at location 0x0126f9bdThe exception unknown software exception (0 x 40000015) occurred in the application at location 0x0126f9bd
Click on OK to terminate the program.HelloYou did changes to the computer before the show?Method 1:Place the computer in a clean boot state, and look for the question:To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to solve the problem by running the clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: When you're done to diagnose, follow step 7 of article to start on normal startup.Method 2:Run a full scan to a computer using the antivirus software installed on the computer or the Microsoft Safety Scanner to see if it makes a difference:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection. For a real-time protection that helps you keep your home or small office PC against viruses, spyware and other malicious software, download Microsoft Security Essentials.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. -
Original title: lsass.exe application error.
DELL Dimension 4700 windows xp operating system starts
Lsass app error appears:The exception unknown software exception (0xc0000417) occurred in the application at location 0x008d1b4eI tried to boot from disk to reinstall windows but same error message.Cannot start ins any safe mode or otherwise, Please HELP!Hi pickertop,
Thank you for your reply,
I understand that the issue has not been resolved now. I'm sorry for the inconvenience caused to you.
Exactly how you try to reinstall?I suggest you to explain exactly how do you reinstall Windows.I would be able to guide you in the right direction, once I get the enough information.Kind regards! -
Original title: application with microsoft lifecam hd-5000 error. My operating system is XP Sp3.
I tried to download it from the microsoft site and I have the same problem. After installation, I click on the lifecam 5000 and I get the following message:
"LifeCam.exe - the exception unknown software exception (0xe0434f4d) occurred in the application at location 0x7c812afb.
If I anwser or not it then closes. How can I fix this problem?
Hi ChristopherBell,
I recommend contacting Microsoft Hardware support for assistance.
Reference: TroubleshootingHope the helps of information.
-
I closed my computer and he says there are a few updates that should be installed in front of him close. I let it run and my computer off. Now, when I turn it back on I get the following error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb. And now I can't get my computer to connect to a wired or wireless internet connection, and it seems to be running slow. Any ideas what it is or how to fix it?
Also, I tried to restore my computer to a few days ago and running my software virus and nothing is changed.
Hello
Have updates you installed? You can check this in the history of the update?
Step 1: To check the update history, follow these steps:
1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.Step 2: Refer the article that could help you solve this problem.
You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box
http://support.Microsoft.com/kb/927385 -
Original title: remove ibryte.
I'm trying to uninstall ibryte not much of a success. error message
The exception unknown software exception (0xe0434f4d) occurred in the application at location 0x75bfb727Hi cgam,.
· What browser do you use?
· How you tried to uninstall iBryte toolbar?
You can run a scan for viruses online from the link below. If it is detected as malware or virus remove it.
http://OneCare.live.com/site/en-NZ/default.htm?mkt=en-NZ
If you have antivirus software installed on your computer, please install the latest update of the software to make it work properly.
If you do not have any security software installed, you can download & install Microsoft Security Essentials.
Reference: iBryte is on Facebook
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error message: "Unknown software Exception" Oxc00000td - place: OX76f755ab
Please:
At the start: I get this error message: "Unknown software Exception" Oxc00000td
as well as various slot numbers, for example: oxc00000td
Thanks for your efforts on my behalf, I'm
OCHARDON
We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
If you are overclocking stop. (chances are that if you are unsure if you are, you are not)
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the copy.
* Join ZIP archive to your message by using the button (attachments) "trombone".
* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.Please also run MSinfo32 and download the output as well.
To run MSinfo32 please go to start > run > MSinfo32
Go to 'file', 'save' and download the PDF is saved with the DMP
(Instructions for XP, Vista, Win 7, Win 8) -
I have windows 7 64-bit, Sp1 of HB. I use MSE as antivirus. When I shut down my PC, an error appeared "hpsmartsynccalreminderapp.exe the exception unknown software exception (0xc06d007e) occurred in the application at location 0x760fc41f" I have HP Pavilion Desktop (p2 - 1258 in.)
Relates to the HP software
-
Rebecca.exe - Application error the exception unknown software exception (Oxe0434352) occurred in the application at location Ox46ca5bf8
You have any suggestions on how to fix or repair the previous message? I have a HP Pavilion e037cl-15 Notebook PC. HP recovery all does not work. The program crashes. I am unable to run the system, the system recovery restore.
Hi Carol,.
The application that this question is HP Recovery Manager from HP. I suggest you try to uninstall and reinstall the recovery program HP Manager and check if it works for you.
Refer to the following article from HP to remove HP Recovery Manager.
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00810298
See the following article from the HP to install HP Recovery Manager.
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-67257-1
If the problem persists, then it would be better to post the same question in the HP Support forum for more help on this issue.
http://WWW8.HP.com/us/en/supportforums.html
Please do not hesitate to visit our Web site for any help with the Windows operating system.
-
error unknown software exception (0xc000409) in the application at location 0x00414d78
It has been a few days I can only open the Adobe .pdf documents, but I cannot print, because it appears the following message: "error unknown software exception (0xc000409) in the application at location 0x00414d78.
Hi andreav31807571,
Please let me know the version of the player & OS installed on your system?
Try this: -.
Go in Edition > Preferences > (improved) security > protections Sandbox and deselect the option enable protected at Startup Mode. See if that clears it.
Kind regards
Nicos -
I downloaded the CD player on windows 10. Unable to install the 15.009.20069 update. gives error 1635. Reader is not all functions available - documents opens on the edge of microsoft despite moxilla firefox as my default browser
Hi Jacqueline,.
Please check the steps in the article that Sukrit Dhingra shared with you. If in case the issue is not resolved with who perform a clean installation of drive using the cleaning tool and install offline using. Links provided below.
Download Adobe Reader and Acrobat cleaning tool - Adobe Labs
Adobe - Adobe Acrobat Reader DC Distribution
To set the default on Windows 10 drive, try the steps from here: Reader/Acrobat is not the default PDF owner | Windows 10 threshold 2
Thank you
Abhishek
-
Original title: I get the message "software exception 0 x 40000015 occurred in the application at location 0x0141Fafd.
I have a desktop with windows 7 on it. "I get the message," ' software exception 0 x 40000015 occurred in the application at location 0x0141Fafd.
does that mean and what should I do.
May depend on which program and in what context you see all these err
-
Original title: the exception unknown software exception (0xc0000417) occurred in the application at location 0x6682baf7
When I had installed Bitdefender total security 2013, the above message was quick and have you installed either. I tried to uninstall with the Bitdefender uninstall tool and reinstalled again but the problem is to stay the same. Please someone help me?
Hello
1. how you try to install Bitdefeneder?
2. is this issue only occurs when installing Bitdefender?
3. have you made changes on the computer before this problem?
You can follow the suggestions and check out them.
Method 1
You can read the article and see if it helps.
Installation of your Bitdefender product
http://www.BitDefender.com/support/installing-your-BitDefender-product-1024.html
I can't connect to Internet
http://www.BitDefender.com/support/I-cannot-connect-to-the-Internet-865.html
Method 2
Check to see if the problem exists in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual
Previous post your answer for you help in this matter.
-
Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?
Hello
You are unable to download the updates?
Try the following steps to resolve the problem:
Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.
Check out these links:
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-offhttp://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:
See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
http://support.Microsoft.com/kb/958052
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Operating system does not start; F11 gives error.
HP Pavilion dv7
0xc000000f error code
-does not start the o/s
-not boot to safe mode (or whatever it is)
-System gives error F11 recovery
-friend did not restore system cd
-OS is Windows 7
I removed the hard drive and slave it to my office (using 2.5 USB cable). The files are accessible except the \USERS directory is MIA. If I can see the C: and D: (recovery partition)-
Can I run the program on my desktop computer to create the recovery CD? (faster you proceed your order/delivery/arrival)
Other suggestions?
Thank you...
ACETech says:
p/n: NM295UA #ABA
Installation media (recovery dvd) was not made by the user. That's why I asked if I could make running the hard drive from outside the laptop (enslaved at my office). Thanks for the info, I can't do that.
Will be there without you say the o/s? It is not sure that vista or 7 32-bit or 64-bit.
Looking at his hard drive Windows and a Linux flash player, I don't see his user under the \users Directory directory. It of funny, just might be blown away...
It's Windows Vista Home Premium 64-bit with Service Pack 1.
Best regards
ERICO
Maybe you are looking for
-
I got an iPad Pro if I reset my iPad Air this will affect my Pro iPad an iPhone to factory settings
I would like to me to put my Air iPad to factory settings will be this effect my other devices
-
Silent crash LV with threading and OOP on f2 LV2009
I have a request of object-oriented programming using a thread abstraction class. When I run my test program for 5 seconds it crashes and LV closes without any error message at all, it just silently dies. The application is backed and I tried to stri
-
I can't watch videos on my system.
I wonder why when I try to watch videos on my Vista OS, they stop after each 3-5 words and it takes a while for the video to start over? For example, I tried to watch the video training for my new product, MS 2010 and it takes a lot of time?
-
Storage of hybrid matrices 3 with Betclic
I have 2 6500ES and 1 6100XS used by 8 ESX hosts approximately 130 virtual machines running. Performance is important, but I migrated just my MD3000i data on the 6500's, so I already see an improvement... the SSD is impressive. :) I have 3 question
-
I tried to install Google Sitemap Generator in windows 7 Professional, but he failed.
The error information is displayed as follows: "It is a problem with this Windows package install." A program run as part of the Setup did not finish as expected. Contact your personal support or packaging supplier ". I don't know if are unable to in