Avoid duplicated when importing photos

Similar Questions

• LR5: time offset when importing photos - why?

  Import my pictures from the camera with storage in folders by date. Now, I've discovered that photos taken before midnight are stored in the folder for the next day.

  After a review, I found that the time displayed when you move the pictures in the import dialog are always displayed with an offset of + 2:00 for the real time (such as described in the camera) when the photo was taken. So all photos taken after 22:00 are stored in the folder for the next day.

  My conclusion is that LR obviously takes the offset from the UTC time zone (in my case: THIS summer, which is UTC + 2) when importing photos. I remember having that first saw on travel in New Zealand last year when import photos on my PC that I had put to the local time zone on a trip, so this shift was 12 hours.

  When viewing the photos later in the module library or development, the time is displayed correctly, so obviously drawn "like what" EXIF/XMP.

  Is this a known issue? I could not find a place in the LR settings to control this behavior.

  It is a very old bug, which has never been set. The simple solution is to import from a card reader, not a camera directly connected. The insect bites only during the import of the camera.

  Image capture metadata must be perfectly OK, so no need to change anything here, it is only the name of the folder that is affected by the bug.

• LR 4 and 4.1 can't create new folder manually when importing photos

  Windows 64, i7, 12 GB of RAM

  I don't seem able to create a new folder manually when importing photos.  It still works fine on the same PC with LR3.6.  Anyone else seeing this?  Thank you.

  

  Yes, I'm on Win7. I can get the result that you specify.  I right click on the folder name in LR and then choose "Create a new folder."  This shows the dialog box windows.  If I then right-click in the right pane and select new > folder, I get a new folder empty in the right pane and can type the name, then select this folder.  If, instead of click with the right button in the right pane, I try to type the name of the new folder in the bottom of the dialog box where it says "file:" then I get this error message. That's what I mean by saying that the process has changed slightly in the LR4.

• Camera with GPS and Photos shows not all contact information when importing photos in pictures

  I have a Nikon AW130 with active GPS. While previously using iPhotos he always imported the exact location when you import photos. I'm using pictures and nothing appears under location. We are on a cruise on our sailboat and spend 10 months foreign traveling or diving in remote locations, geotagging is important. And I'm not geotag pictures of thousands that we take in a season of navigation manually. The Internet is also either not always available or slow and costly iCloud is not always possible. So what is the solution? Thank you.

  Photos will show the locations only, if the computer is connected to the internet after importing the photos. He needs a database of Apple connection to retrieve the names of places.  Pictures don't show latitude and longitude but a place name. If you have an internet connection, you should see a name of places and a small map in the Info Panel for photos.

  

  We are on a cruise on our sailboat and spend 10 months foreign traveling or diving in remote locations, geotagging is important

  Names of places in photos are not a great help in navigation.  Most of my photos of sailing is simply display "North Atlantic" or "Sea of Caribbean", such as the location, but the locations of the pins on the map are correct.  And if you export photos Tags the GPS will be integrated. Just, make sure that you enable empbed location information in the Photos of preferences > General.

  You can check if the GPS has been applied by the camera, if you export Photos photos, open in preview. The Info Panel in preview (Tools > Inspector) will tell you the GPS coordinates.

  

• Improve when importing photos

  In the opening that you used to be able to apply-auto-enhance photos like they were imported.  This has saved be a job having to do it later.  I am also pleased with the results of her auto-améliorer in 99% of situations.  I have now taken pictures but I don't see a similar option on import - no one knows if it is available?  Also and if not possible when importing - y at - it a suite of choice a lot of pictures and then applying the setting to improve in bulk?

  Thanks in advance.

  There is no automatic to apply when importing adjustment.

  And you can't batch apply adjustment either. It is limited compared to the opening.

  What you can do, however, is to adjust a photo you like.  Then copy ⇧⌘C and paste this setting for a different picture with ⇧⌘V

  You must be in edit mode to be able to copy and paste adjustments.  But you can use the arrow keys to advance to the next photo, without leaving edit mode.

  And you can send a feature request to Apple: Apple - Photos - comments

• iPhone 6s disconnection when importing photos

  Seems not to be the only one out there with this, but when I try and import pictures all applications (opening, Photos, Image Capture) I try and fail. I thought that the iPhone has disconnected itself. Image capture also gave me error code 9934 once. I ran disk utility and found no abnormality and it seems that others have a similar problem.

  I wonder if it's something to do with too many pictures to import? I have about 234 to import. Perhaps a memory problem somewhere?

  My phone connects to iTunes and disconnect here, even when it disconnects from the photo apps. I can connect using wifi with iTunes, but it does not work with the photo applications. At least I'm getting the same number of disconnection of the phone.

  Try to think of another way to launch launch this - wait Apple fix and fix or try icloud pictures but that is not an a way to do it?

  Thank you

  Hello David,.

  Thank you for using communities of Apple Support.

  I understand that you are not able to import photos from your iPhone to your Mac.  For the troubleshooting steps on this issue please take a look at the link below.

  If you are unable to import photos from your iPhone, iPad or iPod touch to your computer

  See you soon.

• How to change the import settings when importing photos

  Changing the settings to import photo with Windows 7

  I want to change the import for my Canon camera settings when you import pictures using Windows 7.  I had already managed to do it once but to adjust settings again.  However, when I connect my camera to my PC, it starts automatically import photos based on the current settings with no option to change.  Please help - its driving me crazy!

  Microsoft seems to be lame on answering machine bugs here and just standard information messages, which of course do not work.

  A solution has been validated, in part, to david.gardiner.net.au/2010/02/changing-location-of-pictures-and.html. Maybe there is an easier way.

  In the Windows registry under HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Photo Acquisition

  There are a number of subkeys. For example, there is a subkey "Camera and Portable device."

  Return the next value of AcquisitionFlags to 0 x 82 in the registry key seems to restore the Import Wizard asking you to specify an optional tag and you click again on the link "Import settings":

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Photo Acquisition\Camera and Portable device

  To make this change yourself, follow these steps (with the standard warning that change the incorrect Windows registry can completely ruin everything!):

  1. run regedit.exe
  2 navigate in the tree of the registry to find the following subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Photo Acquisition\Camera and Portable device

  3. double-click on the value "AcquisitionFlags".
  4. Type "82".
  5. click "OK" and close the registry editor

  I had to scan it for my Scanner in the category.

• Short life time when import photos?

  Whenever I'm importing photos - JPEG or psd files, layers are imported as a term of 2 to 5 frames (very short).  Is there a way to change this or match to my composition?  I tried to change the preferences to import with no luck.  Or, what I have to do something on the side of Photoshop to extend the service or is the duration of my membership that is 30 seconds? It makes me crazy where I can't seem to find a solution.  I am currently using AE CS5.

  You probably have the sequence option enabled in the import dialog box. Turn the power off.

  Mylenium

• Avoid specific file types when importing photos

  I'm importing all you photos by devices of the families today and noticed several PNG rather than Galaxy S4 my wife files.  These seem to be web related navigation. Is it possible to configure the import programs to exclude PNG files?

  You are welcome.

  As far as I KNOW, there isn't an easy way to automatically filter the files to import from a smart phone.

  If you can display your phone as an external drive in Windows Explorer (what can I do with my iPhone), you can sort the files, choose png files and copy it to the rest.

• I have a problem with Lightroom 5.7 when importing photos using Apple OS 10.11.3 (El Capitan).

  Hello

  I use Lightroom 5.7 well, but I can't import all of the photos because I installed El Capitan, 10.11.3 on my Apple computer OS version.  How can you help me please?  How can I get an update of my one-time purchase Lightroom?  I'm not using Lightroom CC

  Thank you

  El Capitan has changed the permissions of the folder that you chose as your Destination in LR import window. Change the Destination or set the appropriate permissions on the drive/folder that you selected.

  If you have selected an external drive as destination then it could also be that external hard drive is formatted in Windows NTFS format and El Capitan deleted the utility you had installed for OS X could write to disks formatted in Windows NTFS format. OS X can read NTFS formatted the drive, but it cannot write natively to them.

• Lightroom CC2015 - why PC crash when importing photos in Raw format?

  
  I used Lightroom CC 5 installed on my PC (Windows 7 Professional 64 Bit). Everything worked fine without any problem. After installing the new version of Lightroom 6 I had problems with unexpected stops of the PC.

  I took the following measures:

  1 / the uninstall Lightroom CC2015-problem still remained.

  2 / the Lightroom 5 uninstalling and re-installing Lightroom CC2015 - problem still remain.

  3 / the Lightroom CC2015 uninstall and remove all files associated with Lightroom

  4 / re-installing Lightroom CC2015 and start to import the photos in JPEG format - worked fine and no problem occurred

  5 / starting import Canon Raw format photo and PC crashed during construction to the top of the smart Collections. Repeated step and PC crashed again.

  Otherwise no problem with laptop computer PC Elite / 8 GB / 64 Bit OS and NVIDIA Quadro FX 7800 M of RAM

  What other measures do you propose to get rid of this problem?

  you have any Application under the name of PC wizard 2015 installed on the computer, try to disable it or if it is possible can you delete it.

  looking at the crash report, it seems that could cause the problem.

  Thank you

• Lightroom 5 glitching when importing photos.

  I use Lightroom 5 for about a week without a problem. Today I went to import two photo shoots and the images come in very well until LR do a second pass and then they are all glitched.

  

  I do nothing differently with this import that I did with the previous one. Same camera, same format CR2, same lens, subject as well.

  Do not apply the presets or development parameters.

  Anyone know what is happening? It's scaring me.

  NEW iMac, all updated software up to date.

  It's almost always a hardware problem. Some piece of hardware in the chain of transmission of your camera on your hard drive and memory, is bad and is corrupting your images, resulting in what you see.

  You must isolate the pieces of material inidivdual, a transfer of photos using a different piece of hardware, to see if the problem goes away.

• LR3 will automatically transfers the keywords of photos created in PSE when importing photos

  Hi eveeryone.

  I'm new to LR3. I would like to import all of my photos in LR3 and all of these photos have keywords tags that have been made to post-secondary studies. LR3 will automatically import the key word tags too? If this is not the case, how would I do?

  Very much appreciate your comments.

  The answer is 'NO', because the import is the WRONG thing to do here.

  The procedure is to have the LR3 to update your PSE catalog. In Lightroom, file-> upgrade of PSE catalog. All your tags will appear in Lightroom as keywords. Couldn't be simpler!

  http://help.Adobe.com/en_US/Lightroom/3.0/using/WS217DEA0F-2A78-4445-89CB-4CED1AFA450E.htm l

• Lightroom crash when importing photos from an SD card using iMac 5 K.  Tried several cards, tried to restart, same problem.

  Since upgrading to LR 2015.2 my LR crashes each time I have import from SD card.  With the help of the new iMac, 16g memory.  Anyone have any ideas?

  Claes, thank you.  I was getting ready to try your tips and an update to LR (2015.2.1).  I installed that and doesn't crash anymore.  Thanks again.

• How can I use iPhoto importing photos from card reader?

  Aloha all, I really prefer to use iPhoto, or opening when importing photos from card, but Photos opens whenever I put in my camera card. In the preferences of the Photo, the choice to select what app to use when importing is gray. How can I make iPhoto, or even simply to capture Image open rather than Photos? I put iPhoto preferences to do this, but it seems pictures somehow overrides it. Tips, tips out there? Mahalo

  Try to set the default application to open the General preferences in iPhoto window:

  

  Do you know that iPhoto is no longer supported by Apple print shops so that all projects must be created and controls through Photos?  Just a heads-up.

  If the above does not work, you can kill all apps to open when a camera is connected with the following command in the Terminal application, posted by JadedEye:

  JadedEye

  22 December 2015 09:01

  Re: Prevent DEFINITELY the Photos to open automatically

  in response to leonie

  OK, it worked for me on El Cap

  Open a terminal window

  Type the following in the terminal and press enter

  defaults write currentHost - com.apple.ImageCapture disableHotPlug - bool YES

  (followed by the return key or enter - ed)

  The exit of the terminal.

  Photos will run if you run, but it will not autolaunch on each connection to a camera or the card or reformatted the card.

  If you want to return Photos auto-launch almost everything, use the same command change YES no

  This correction has set my workflow back to normal without Photos of gd lance all the time.

  You must then manually run the application that you want to use with the memory card or camera.