Avoid loss of data and to increase the storage capacity on EP T310

Hi all

I am looking to increase the storage capacity on a PE T310. When I look in disk management it says C: virtual SCSI disk to 232 GB and 11.9 Gb free. Physically, I see 4 HDD connected when I look in the box. Don't know if its reading HARD drive all for or what how was set up that part of my problem. the OS is windows 7 and this I see that the internal controller is the SAS 6/IR. Essentially, this box is used as a centralized storage, but ideally as a server with shared resources. And Im very new to the RAID configuration and working with SCSI. I read the operators manual and I saw many capabilities that this server can do, but I'm not familiar with the activation of these functions.

Issues related to the:

1. How will I know which configurations have been implemented for storage?

2. How can increase storage without losing any data?

Please help.

TY!

Advertisement

>> 1. How will I know which configurations have been implemented for storage?

You will need to go into the bios of the controller (ctrl-c) to see how arrays are configured.  Software OpenManage won't work on Windows 7, only on server operating systems.  This controller supports RAID 0 and 1.

>> 2. How can increase storage without losing any data?

You should have a second table available for storage.  This will be confirmed in the controller BIOS.

Let us know what is configured in the BIOS of the controller, and we can help you further.

Kind regards

Tags: Dell Servers

Similar Questions

  • I want to delete data from my i cloud storage for the little free space without increasing the storage capacity. How to do?

    I want to delete data from my i cloud storage for the little free space without increasing the storage capacity. How to do?

    Storage of parameters/iCloud/Storage/manage or delete some of the data being synchronized with iCloud, such as photos.

  • How can I increase the storage on my iphone 6?

    My i-phone comes with a notification that there is not a lot left on my phone storage.  I don't want to delete all of my apps.  How can I increase the storage capacity?

    Maybe take a look to see how much of your storage space is taken up with music and pictures and stuff like that.  You can move a lot of this to iCloud.

  • . Files NEF (Nikon D600) in Camera Raw (bridge CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good.

    . Files NEF (Nikon D600) in Camera Raw (Adobe CC) appear extremely saturated to the point of loss of data. When exporting, the images are very good. There is no update available.

    As it appears in Camera Raw

    In camera raw.PNG

    Exported

    Exported.PNG

    In Bridge, open camera raw preferences and uncheck the option of graphics processor at the bottom of the dialog box.

  • As of the 31 version, why is there still no option of Thunderbird to insert the date and time in the message that you write?

    As of the 31 version, why is there still no option of Thunderbird to QUICKLY insert the date and time in the message that you write?

    Literally, saw this option very well needed - and opportunity-"promise" for three years now, and even if there are only one or two formats that could be used, at least the option is there.

    It seems that only is to bind a Macro, and the tool to Thunderbird and do it this way.

    Joe Rotello
    [email protected]
    Skype: joerotello

    If the installation of the add-on of TimeStamp is unacceptable for see you if there is a related add-on that you that you already might have managed to convince author to add your function. The Add on more for example has many variables that can enter the body of the message that get automatically replaced with the appropriate data when you merge a message.

  • is it possible to display the Date and time in the address bar or a clock window constantly

    I need to take screenshots with date stamps and time using the script of iMacros. Everything by taking screenshots iMacro don't add taskbar windows for the date and time. It takes screenshots of browser. Is it possible to display the Date and time in the address bar or a clock within the tab browser constantly to capture the screenshot with time stamp through iMacros
    I added the big clock background Add-ons, but it is visible to new tabs.

    Badly looking for help and it will be really appreciated...

    Try this extension:

  • Satellite Pro 6100 - how to change the date and time in the BIOS

    Hello

    I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

    When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

    I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

    How can I change or update the time in the bios?

    Thank you

    Hello

    I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
    You can activate Windows by phone?

    Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
    Usually in the configuration of the BIOS you will find a brief info how changing the values.

    Check this box!

  • OfficeJet 6700 premium print date and time on the fax history report

    Running Windows 8.1 on my OfficeJet 6700 Premium AIO H711n fails to print the date and time on the historic report of the fax.  I need this information to check the box of cylinder head of the fax the documents have been sent.

    Hello dcflorida,

    I did not the 6700 but on another machine, I had to 'reset', time and date in the printers preferences.

    If you haven't done it yet, go to Settings/preferences/time and Date on the All in One printer set up (once again if necessary).

    IF your machine does not have the time / date on the history report, it includes it in the Confirmation page?

    Here is the link to the Manual too.

  • How can I get my Hp officejet 6700 to print the date and time on the fax confirmation page

    How can I configure my officejet 6700 premium to print the date and time on the fax confirmation page?

    Hello

    As long as the date and time is set, it should automatically appear on the print.

    Is the date and time set correctly on the printer?

  • Adjust the Date and time on the HP LaserJet MFP M127fn Pro?

    Hello

    Someone knows how to change the time on a LaserJet MFP M127fn Pro?

    Thanks in advance!

    Sean

    .

    Hi @SeanKaneFLA ,

    I see by your post that you would like to know how to change the date and time on the printer. I would like to help you today.

    This information was given by the manual on page 45. MFP LASERJET PRO.

    You may have configured these settings when you installed the software. You can configure these settings
    at any time by using the control of product or the HP Fax Setup Wizard panel.

    LCD control panel:
    1. on the product control panel, press the Setup button.
    2. Select the System Configuration and then select Date/time.
    3. Select the clock in 12-hour or 24-hour format.
    4. use the keypad to enter the current time and press the OK button.
    5 Select the date format.
    6 use the keypad to enter the current date and then press the OK button.
    7. Select Fax Setup, and then click Fax header.
    8 use the keypad to enter your fax number and press the OK button.
    NOTE: The maximum number of characters for the fax number is 20.
    9. use the keyboard to enter your company name or header and press the OK button.
    NOTE: The maximum number of characters for the fax header is 40.

    (Windows) HP Fax Setup Wizard

    1. click on start and then click programs.
    2. click HP, click the name of the product, and then click Fax Configuration Wizard.
    3. follow the on-screen instructions to configure fax settings.

    I hope this helps.

    Good day!
    Thank you.

  • How do set you the time, date and month on the HP Officejet Pro 8600 more

    How do you set the month, Date and time on the Officejet Pro 8600 more?

    Hello

    The screen of the device press setup and go to prefferances, and then press ok. There you should see the option "time and date". You can set it from there.

  • Display the date and time on the taskbar

    I just upgraded to Vista Premium 64 for Windows 7 Professional as well as the date and the time in the taskbar display became static at 07:25 08/01/2010. When I turn the date and time of the show, but I can't find a way to display the correct information on the taskbar.

    Hi geoffinbaja,

    It seems that some application or service is in conflict. To narrow down on the boot of the issue of the computer toboot and check if the issue still persists. Link below will help you to start the computer in clean boot:http://support.microsoft.com/kb/929135

    If the problem does not persist, you can continue with step 2 from the link above.

    Make sure that you reset the computer in normal mode in step 7.

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • cannot change the date and time in the system restore

    How can I change the date and time in the system restore? When I try to create a new restore point, I can't change the date and time, the system automatically date and time in.

    System Restore will always set the date and time of any restore point created at the effective date and time of the machine.

    If you want to restore your computer to a date and an hour earlier, you must select restore from a restore point that was created at the earlier time.  This article explains how.

    With the help of the Windows Vista system restore
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    My apologies if I misunderstood your question.  Why should change you the date and time when a restore point was created?  The only possibility of achieving a fictitious date and time will result in a change as actual date and time Windows or in the Bios, either option with unforeseen consequences.

  • date and time in the photo gallery

    the date and time on the Gallery picture is stuck on 01/01/2013

    How can I change this?

    This is the moment where the photo was taken not present.

    It is displayed like that as you change the time from that currently used for the image.

  • Form Validation failure: "value is not a date and time in the format"

    Hello world

    I am facing a weird problem in my custom OAF page. I'm displaying the records of a particular table through dynamic VO and dynamic array. All records appear correctly. But when I try to click on NEXT 10 records in a table, I get the error like "FAILED FORM VALIDATION: 1000 ORG CUST BO VERSION is not a date and time in the format. Just like in the screenshot below.

    DESKTOP.JPG

    Strange part of the question, if I select the columns to display not related to this day, so I only am not facing problems. If I select only dates to display and also am not facing this problem. If I use the mixture of this type varchar2 and data, I get this error.

    I tried to change the type of data but no use.

    If we close, look at the PARTY_ID error message trying to copy its data to ORG_CUST_BO_VERSION the last column. Why what's happening clue me less. Can anyone guide me on this please?

    The problem is that you use the same name for the creation of the MessageTextInputBean inside the Table.

    The name of MessageTextInputBean make it dynamic.

    ex: -.

    OAMessageTextInputBean oamessage = (OAMessageTextInputBean) createWebBean (pageContext,

    MESSAGE_TEXT_INPUT_BEAN,

    NULL,

    'text' + columnNo);

    See you soon

    AJ

Maybe you are looking for