AZ-605 new incredibly slow

I have new AZ-605-UR23 which is a really nice computer, but is incredibly slow.  I migrated to a more old Pentium 3 Windows XP set up that was lightning fast. I must say at the outset that my computer skills are minimal so feel free to correct any assumptions I could have done. My system came with windows installed 8.0 and I upgraded to 8.1.  I checked the Acer website after seeing an analysis of Belarc on my computer missed me 3 updates of pilot.  I downloaded and install in awhile.

The problem, I ran in - I ran a few software - driverupdate.com [the site says it's as a Microsoft certified partner, so I guess it is reputible].  When I downloaded their software and ran it the result was that I have 13 drivers that are obsolete.  Looking for acer driver update site again there are only 3 updates [the ones I downloaded] 8.1.  When I looked for 8.0 updates the names of the pilots did not correspond to the specific series listed at Acer. some of the manufacturers [Intel and Realtek] were the same, but others [for example, liteon, wistron, NVIDIA] were not on my list.

I called support and told to download and install all the drivers of 8.0 and my system would be fixed.  I kept stressing that none of the names was the same, but the response was the same.  New - I'm obviously not an expert, but I don't want to make a mistake and have to go back to something stupid.

Thanks a lot for any help

Yet once again, I want to thank everyone for their help!  My Acer has been lowered to 8.0 and I'm a happy camper.  I'm always implemented, but should be finished today.

I just wanted to share something that can have an impact on the whole of the problem initially, I remind you all that I am not a techie and where what I say is incredibly stupid please don't laugh too hard.

Yesterday I was checking pre-sets on 8.0 and discovered that MS patches are updated automatically.  I thought that was the case because he had some sort of update itself installed approximately 0300 Saturday morning.  In any case, earlier I had checked something on the Panel "information on the performance and tools" and generated a small report I printed "more details on my computer" which assessed my computer at a 9.9 3.9. There was a date on this report was dated June 13, 2013.  I bought the computer the first week of December and received mid-December.  I'm assuming that this date indicates when the sysytm was put in place and is "birthday" of the computer.

This prompted me to check the line on the updated area that was something like update history.  History has shown that I was GONE 90 essential or important updates! When the computer has been unpacked and physically put in place, I think I remember that I was prompted to download 8.1 immediately before continuing the installation of things.  A hacker has helped me set up and started the update and returned the next day to finish the rest of the installation.

Bottom line - 8.1 has been installed on a system lacking 90 updates to the previous version of a system, it was the upgrade.  An assumption on my part, is that the missing updates would have been necessary for the 8.1 install to be indeed installed.  I have to download/install updates 90 on the current system of 8.0; It seems to work even better was the case prior to the updates and it was working fine before.

In fact, the only reason why I'm writing this is in the offchance I'm right and that was the problem, it can help someone else.  The solution proposed by the members of the forum was right on - wish I had not feared to do so and stopped what I was doing and just downgraded.  8.0 seems really easy and everything works fine.

Daisy

Tags: Acer

Similar Questions

  • Computer pavilion laptop i7 incredibly slow

    Hi, I have a hp pavilion 2321ss g6 with a processor intel core i7. I had for about 2 years. It had not occurred to me to use this forum til now.

    Initially, he had run on win8, but he was almost inoperative (very slow) and I have upgraded to windows 10.

    As I installed the new computer system was incredibly slow and lazy. Opening a program, for example a browser may take more than a minute, making it unusable. Old computers are faster. I think all the updates on the system are made.

    Startup time is 300 seconds, and after that start it does not work well, on the contrary, it takes time to "warm up".

    What can I do?

    Thank you

    Lisa

    Please follow the troubleshooting and suggestions to this sticky following.

    http://h30434.www3.HP.com/T5/Notebook-software-and-how-to-questions/my-computer-is-running-slow/m-p/5599548#M206024

  • The mail is incredibly slow since the update to El Capitan

    Hey,.

    I use Mac OS X El Capitan v. 10.11.1 on a MacBook Pro, 2.8 GHz i7 with 16 GB of RAM. I'm 50 Mbit DSL online.

    I never had any problems with sending or receiving mail. But since I upgraded to El Capitan Mac Mail has gotten incredibly slow and almost unusable. It will take up to 10 minutes to load a simple text message or attachment of the small (less than 1 MB) image. I don't have these problems when downloading something from a Web site. Download a 3 MB file takes 1-2 seconds.

    Also sending emails is incredibly slow. It takes several minutes, also just for the mails in plain text.

    And then Mac Mail seems often to synchronize, even if there is no new messages. It displays "loading 10 of 32 messages" which is stuck and loads forever. And nothing will happen until I restart Mac Mail several times.

    I am managing 5 accounts IMAP with Mac Mail, which is more than usual but not an absurd number. In addition, I never had problems before. They are partly accounts Google App and partially Zoho.com.

    Apple: What can I do to recover usable e-mail software? I don't want to go, but I have to examine it if it takes 10 minutes for an attachment to load.

    Thank you

    That has solved it for me (found here on the forum):

    • Make a backup
    • Close mail
    • Copy the ~/Library/Containers/com.apple.mail folder to a different location (in case something goes wrong)
    • Delete the ~/Library/Containers/com.apple.mail folder
    • Restart the messaging

    You will need to reconfigure parts of the mail, but it is now much faster. Let's see if that is still true.

  • First CC2015 - interaction of the interface is incredibly slow.

    Hello!

    As shown in the topic I have a problem with that. I recently installed CC15 on a new system, all the drivers/codecs are updated.
    Play or rub through images is no problem, but interactions with the interface is incredibly slow. -> (Registration form: PCC15 - YouTube )
    Trimming or moving of clips is not very pleasant. I tried switching MPE software, no difference.


    It is exactly the same in CC14 as I tried to install it as well. Everything worked flawlessly on my system (cc14) previous, the problem started with the new facility.


    The material should not be a problem. As it worked fine on my old spec (i7 2600 k @ 4.4 Ghz/16 GB / GTX770)

    HW specs:
    Intel Xeon 2.3 ghz 10 c 2650v3
    32 GB DDR4
    WD Black drives
    GeForce GTX770

    Does anyone have a solution to this? Or can someone help me to identify the origin of problems?
    Thanks in advance people.

    Kim

    I thought I'd share the solution that worked for me on this issue.
    I just disabled windows Aero theme 7, and he began to work as fast as it should.

  • Removal of the channels is incredibly slow

    Photoshop CC 2014 with all updates. My script records two songs in two channels. In the end, I delete the channels using the following function.

    function deleteChannelByName (channelNameToDelete) {}

    var channelRef = activeDocument.channels.getByName (channelNameToDelete);

    channelRef.remove ();

    }

    When I run the script in the Script IDE extend and call this function to delete a channel containing a selection with a green progress bar and the title of «Reconstruction histogram...» ", a dialog box appears new, yes 9, times. It is clear a channel an incredibly slow operation. I do something wrong or is it just like that? Thank you.

    Hello

    Gives it a try and let me know if it's faster:

    function deleteChannelByName(channelName) {
        var desc = new ActionDescriptor(),
            ref = new ActionReference();
        ref.putName( stringIDToTypeID("channel"), channelName );
        desc.putReference( stringIDToTypeID("target"), ref);
        executeAction( stringIDToTypeID("delete"), desc, DialogModes.NO );
    }
    
    // deleteChannelByName("aChannelToDelete");
    

    Kind regards

    Davide Barranca

    ---

    www.davidebarranca.com

    www.cs-extensions.com

  • Mac incredibly slow after update of El Capitan

    Hello world

    I own a Macbook that I bought in 2013.

    Data sheet:

    13 "medio 2012

    Processor: 2.5 Ghz Intel core i5

    Memory: 4 GB 1600 Mhz DDR3

    Four days ago, that I've updated my system to El Capitan v10.11.6. At first, he seemed to be well-developed, but after about 12 hours, it started to become really slow - and I don't speak incredibly slow. Almost all of the clicks or typing a letter takes forever.

    I downloaded a free version of CleanMyMac, and it shows that I have to constantly only between 50 and 300 MB of RAM free. I also read that you should let Spotlight indexes all yout files, but it maintains at the end and starting over.

    I have about 90 of my 499 GB hard drive on the left.

    Any ideas or solutions?

    Two suggestions:

    Dump to clean my mac it's crapware.

    Run EtreCheck and report results here - often your problems are caused by incompatible third-party software and someone here might be able to spot it.

  • Incredibly slow machine time

    Why the time machine would be incredibly slow? His 594 k 75,55 GB backup. He turns to 1 k per minute. At this rate, it will take a few months to complete. ??

    -bmatichuk

    The initial backup or a large subsequent backup takes a long time.

    How the Mac is connected on the TM drive? A wifi connection is too slow.

    See also troubleshooting here:

    http://pondini.org/TM/troubleshooting.html

  • Mail becomes incredibly slow, but only if I download attachments

    Mail becomes incredibly slow, but only if I download attachments (photos, files pdf, etc]

    This has happened a lot lately.

    If I get a message with, say, some photos attached Works Mail very well. However, if I can download files attached to my iMac mail becomes so incredibly slow, even if I delete the email with the files. If I quit Mail and then restart the problem persists... I literally spinning beachball if I want to compose a message... everything still works, but each action takes forever. I tried to rebuild the mailbox, but it does not work. The only way to recover messages to work properly (at normal speed) is to restart the computer.

    All ideas

    [I have 24Go of ram on end of 2012 3.4 ghz iMac with a fusion 3 TB drive]

    Start Safe Mode removes the system caches that can help...

    Follow these steps to start in safe mode.

    1. Start or restart your Mac.
    2. As soon as you hear the startup tone, hold down the SHIFT key.
    3. Release the SHIFT key when you see the logo Apple appears on the screen.

    After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

    To leave safe mode, restart your computer without pressing any keys during startup.

    Then try to download an attachment.

  • Firefox works incredibly slow (as in the window is barely functional, not anything related to connection speed) when I run some games on my computer.

    Hello

    Last month, I got a strange problem with my Firefox browser in certain situations. The question is only apparent when executing some 3D games (most often when I run Diablo III). Each time these games is loaded my Firefox browser works incredibly slow. This isn't a question of a connection problem or such, the loading speed is very good, but the actual clicks, bookmark clicks, entered keyboard etc take a few seconds to register.

    I tried Firefox running in failsafe mode which immediately makes the problem disappears. However, whenever I run it in normal mode the problem will be even if I disable all plugin and simple addon. I also tried to reinstall firefox and my addons and flash player times, the problem remains.

    For what it's worth, another browser, I installed is not the problem at all (despite the same some addons installed - I only have 3 of them).

    Someone has an idea what could be the problem? Is the failsafe mode inactivate the other thing the addons and plugins listed in the addon section?

    Thanks in advance

    Disabling hardware acceleration

  • Incredibly slow blackBerry 9300 smartphones, I've tried everything.

    Hey everybody!

    To start:

    I'm on Koodo

    I have a 3g 9300 curve, and it's OS is 6.0 Bundle 2391

    Storage applications: 189.6 MB used 66.4 free

    Pull dough pre:

    Memory usage: 178.7 used 77.1 free under applications.

    Device status indicates 69103008 bytes free.

    After a battery pull:

    Memory usage: 161.4 used 94.5 free

    Device status: 695473936

    I have all the standard applications provided with the Blackberry, not supplements.

    I have a few hundred MB of music on a 2 GB card.

    Now for the problem.

    I've had my crackberry for a month now, and I love it.  But last week, it has become incredibly slow, sometimes sitting for 10 minutes at a time without me being able to do anything whatsoever, and I missed a few calls telephone too.  In fact, at the ceremony of my school, I had my friend put it in her purse, and when she brought out, it was frozen with the clock displaying the start time of rewards.

    I am extremely frustrated. Here is what I tried:

    Battery pull

    Clear the log

    Cleaner memory

    Close all possible applications

    Remove the media card

    Remove languages that I don't use.

    Someone at - it ideas?

    : My battery life took a dive in the light of this situation of freezing.  It lasts usually me from about 07:00 at arouns 9 or 10 in the night, so a good 14 or 15 hours.  But now he is barely 6 hours, and which is often idle and in my pocket.

    Any help would be greatly appreciated.

    OK, so now back to your security settings and turn it off.

    There is really no need for Memory Cleaner use for most users, it does not increase any amount of memory and regularly uses single process time and causes the processor blasted animated clock.

  • Development in C/C++ is make incredibly slow PC

    Hello

    I'm having a hard life because of development of Applications C/C++ on Windows 7 64 bit. A month ago I tried working with my projects using OpenCV C/C++ with the Code::Blocks IDE libraries on my PC. I have added all the necessary libraries, headers, binary, etc. to my property sheet for the project (NOT IN VS, to Code::Blocks). After creating and running my application to test a few times. I get these questions:
    (1) exploring is incredibly slow: takes about 20 to 25 seconds to open a window
    (2) same thing happens with applications like the browser, Control Panel, System properties, etc.
    (3) the volume icon in taskbar comes almost 20 seconds after clicking.
    This is outrageous, I even installed on a Windows XP machine and it works like a magic. I turned the world-wide web inside to outside but no one is quite logical to give me a clear answer. I even spent the IDE to Visual C++ Express 2010 and rebuilt all my OpenCV libraries to adhere to Visual C++ 2010. However, nothing changes and even a simple C++ programming involving floating and whole number computation is now slow PC after a few generations and run. How is what is happening?
    I'm considers MSDN as my last stop before concluding that my PC is rubbish. I have an i5, cache L3, 8 GB of RAM and 500 GB HDD (80% free). Everything you say, please please please please do not say that my machine is underspec. because still more professionally experienced developers use lower the standard machines.
    Van

    Hello MannaAnam,

    The question you have posted is related to C / C++ development and would be better suited to the MSDN Community.

    Please visit the link below to find a community that will provide the support you want.

    http://social.msdn.Microsoft.com/forums/en/category/VisualC

    I hope this helps!

  • MouseOver and mouseout/mouseouthandler() way too slow. Incredibly slow.

    Mouse above and outside (especially out) is much too slow. Incredibly slow. Mouse on sometimes just not all. I tried to play with the frequency: 1, 5, 6, 10... but no change was visible.

    var frequency = 3;
    stage.enableMouseOver(frequency);
    this.myObject.addEventListener("mouseover", fl_MouseOverHandler.bind(this));
    function fl_MouseOverHandler()
    {
      this.myObject.gotoAndStop("over");
    }
    this.myObject.addEventListener("mouseout", fl_MouseOutHandler.bind(this));
    function fl_MouseOutHandler()
    {
        this.myObject.gotoAndStop("out");
    }
    
    

    It's because you have the frequency adjusted to only 3 ("var frequency = 3;"), which means that the position of the mouse is only checked 3 times per second.  Increase in the frequency should improve things.

  • Adobe Photoshop CC 2015 is compatible with Windows 10. The mine opens, but does not seem to work correctly... INCREDIBLY slow. Does not. Must I return to Windows 8?

    Adobe photoshop cc 2015 is compatible with windows 10? Just upgraded Windows 8 and PS opens but does not work properly. INCREDIBLY SLOW. What I can do or should I return to Windows 8? Windows love 10. Disappointed.

    Hi Ravenm,

    Could you please check and make sure that Photoshop is updated to the latest version 2015.1.2

    Also, please try the steps in the following article: Optimize performance Adobe Photoshop CC

    Let me know if it helps.

    Concerning

    Tanuj

  • Incredibly slow to boot from Mavericks Dreamweaver

    Hello

    Since the update to the Mavericks (10.9.0 13A Build 603), Dreamweaver CC (13.1 Build 6443) has become incredibly slow to start.

    When I look at the newspaper, there is this line:

    23/10/2013 17:47:52.426 Dreamweaver [3276]: note on CoreText performance: Client called CTFontCreateWithName() using the name "Proxima Nova Semibold" and got fonts with PostScript "ProximaNova-Semibold" name For optimal performance, use only PostScript names when calling this API.

    Repeat with each font that I installed on my system. for example:

    23/10/2013 18:49:07.538 Dreamweaver [3629]: note on CoreText performance: Client called CTFontCreateWithName() using the name 'Libyan SC' ordinary and got fonts with PostScript 'STLibian-SC-Regular' name For optimal performance, use only PostScript names when calling this API.

    23/10/2013 18:49:07.574 Dreamweaver [3629]: note on CoreText performance: Client called CTFontCreateWithName() using the name "PT Serif Caption" and got fonts with PostScript "PTSerif-Caption" name For optimal performance, use only PostScript names when calling this API.

    23/10/2013 18:49:07.576 Dreamweaver [3629]: note on CoreText performance: Client called CTFontCreateWithName() using the name "Helvetica Neue Medium Italic" and got fonts with PostScript "HelveticaNeue-MediumItalic" name For optimal performance, use only PostScript names when calling this API.

    After that he went through all the fonts on my system finally, Dreamweaver will then start.  Has anyone another considering somewhere else or have a fix?

    Thank you

    Hello dean_siteglide,

    We already have a bug connected to investigate performance related messages in the console for Dreamweaver.

    We could not reproduce the problem of slowness. Launch of Dreamweaver works without any performance degrade compared to the 10.8 same with these messages in the console.  Can you please provide more information on how long it takes to load Dreamweaver and what hardware you are running 10.9 in.

    Kind regards

    Yalpi Shiva Prasad

  • Why Muse runs incredibly slow?

    Muse is incredibly slow... I'm working on a very simple site... the file is only 9.3 MB. No idea why it runs so slow? I use a trial version of Muse because I want to see how it behaves and if she could be a good purchase for me, but if it runs it slow I don't know if I want to buy it...

    Specifications of the computer:

    16 GB of ram

    CPU AMD Phenom II X 6 1090 t. (3.20 GHz)

    Windows 7 Ultimate

    I'm not really a player... I does not play well some Starcraft. One of my friends helped me to build myself a computer.

    Thanks for all the suggestions. I checked for malware. There were about a quarter of an inch of dust on the heatsink that was on my processor so after I removed which helped A LOT. The Muse is still wobbly, so I just rebuilt from zero and no problems so far. He must have gotten corrupted somehow.

Maybe you are looking for