B209a printer cannot find the new wireless network

Similar Questions

• Satellite A210 - 27 M (PSAELE) cannot use the new wireless network card

  Hi all

  I changed my wi - fi for Atheros AR5b91 and hardware network card is locked.
  I can't remove this lock of wi - fi switch or fn + F8 probably it's the lock of the bios.

  I tried to unlock it on Windows Vista, Windows 7, Ubuntu, so it is not caused by software.
  I tried the card WiFi on another laptop (toshiba not) and it's ok.

  If anyone can help?

  Thank you

  Hello

  To me, it seems that you used is not compatible Wlan module.
  But I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=79237

  A user was unable to activate new update Intel Wlan card.
  According to some information, its possible to enable the Wlan card by covering pin 13 on the wireless Mini-PCI network card.
  But to be honest I've ever tried and I would use this workaround with caution.

• HP laserjet p1102w: wireless printer does not work with the new wireless network

  My office moved recently and we have a new wireless network. My printer always wireless worked perfectly on the previous network, but it does not work with the new network. I get a message "the printer is offline. I don't know how to reconfigure so that it detects the new wireless network. Can anyone help? Thank you

  Hi Shlomi,
  Thanks a lot for the info. I'll give it a try today...

• Re: Windows 8.1 - Windows cannot find the new updates

  Hello

  I want to update some updates of Windows 8, but it says that Windows cannot find the new updates, problem code 80070003. IM desperate, I tried many sites and forums but nothing helps!

  Thanks for the replies

  Hello

  Can you please tell us which laptop model you have and what operating system are you using?
  If I understand you right, you have improved your Win8.1 machine and now you have problems to install the Windows updates.
  Is this correct?

• HP LaserJet Pro CM1415fnw color multifunction printer - cannot FIND the WIRELESS NETWORKS

  PRINTER: HP LaserJet Pro CM1415fnw color multifunction printer

  OS: Windows 7

  OWNER: More than 2 years without any problem

  LOCATION/SET-UP: To my personal residence. All-in-one router through the cable company.

  QUESTION: Suddenly, printer cannot find wireless networks. Nothing has changed recently in my service provider or equipment. I know that the router and the internet is not the problem because our 2 smart phones and three laptops still not connect. I triend manually configure the network using the SSID and key phrases, but still nothing.

  Help!

  I would like to perform a hard reset by removing the power of the whole machienethrough the power cord for 30 seconds. Depending on whether I have would reconnect the printer to the wireless network and set a static IP address.

  -Spencer

• Cannot connect C4780 to the new wireless network

  I have a HP C4780 printer. We moved recently and I am trying to install on / connect to our new wireless network (new SSID). I have Verizon FiOS, but seems not support WPS configuration connection.

  I don't have the CD that came with the printer.

  When I connect to my iMac via USB, the printer connects automatically.

  What I don't know is how to connect wireless - where to enter the SSID / WPA-2, etc.

  I tried dozens of paths of online help - I thought I had SOME clues of what I was doing, but apparently not.

  Y at - there anyone who can help?

  Thank you

  mbwiles

  Hi mbwiles,

  I watched Cougar and found that it is Mac OS X 10.8.  The driver for 10.8 is not available for download from HP that you saw.   A Windows laptop would try to get the printer on the network and then the Mac could see.  Of course a Mac laptop with an earlier version would also work as long as the driver is available for download.

• Adding HP ePrint home and Biz iPhone app - mal printer cannot find the email address of the printer

  I'm trying to connect my HP Photosmart c6380 to my iPhone. I have already downloaded the app and my printer is connected to my wireless network, as is my iPhone, but I can't add my printer to the app.

  When I go to 'Manage ePrinters' and try to add a printer with the + button I see 3 choices:

  Add x to list: "no available ePrinters.

  Manually add: I can't find the printer even email address using the instructions available on the ePrint centre.

  Add the WiFi network: my printer is not shown in this list, so it does not support Autodiscover.

  So I guess that if I could just find email address of my printer that would connect to my iPhone for wireless printing, but I can't for the life of me find.

  Any help is greatly appreciated.

  Thank you.

  Hello amybett,

  I have bad news and good news. The bad news is that your printer is not Airprint/ePrint capable. However, the good news is that with the HP ePrint capable home and Biz iPhone app, it didn't need to be Airprint/Eprint, as it is connected to the same network as your phone.

  Here are the steps that you want to print something:

  1. installation of the application by filling in the electronic registration and entering the code (which I believe you have).

  2. Select the item you want to print by using the menu in the application (Photo Albums, files saved, Web browser, etc.).

  3. Once you select the item, you should see article and a big button "Print" under him.

  4. If the printer you want to print to is not listed above the 'Print' button, select the icon on the right (key/computer), and then select the printer you want to use (and other parameters).

  5. press the button 'Back' at the top left, then tap "Done" (blue top-right button) and then press the 'Print' button to print your article.

  Let me know if you still have problems after following the guide above.

• c4599 printer cannot find the specified file

  PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe downloaded and tried to install c4599 printer.  Error system cannot find the specified file "BlockSysUserInstall.exe., which is located in the Temp directory  I noticed that he keeps referring to a coded hard "7zS2F4B."  Have you tried renaming the file in the Temp directory to "7zS2F4B" but still no installation.

  Hi foberg,

  Looks like you have some problems with the operating system installed on this computer. Try the following steps to see if that helps.

  Windows 7 and Windows Vista allows you to have multiple users share the same computer under their own individual accounts. This allows each user to have their own location on the computer where they can store their personal documents, photos, videos, saved games and other personal data. It also allows the owner of the computer assign some accounts the ability to perform administrative tasks such as installing software, while limiting the capabilities of the other user.

  This tutorial will guide you in creating a new account in Windows 7 and Windows Vista.

  1. Click the Start button. It's the small round button () in the lower left corner of your screen that has a Windows flag on it.
  2. Click on the Control Panel menu option.
  3. When Control Panel opens, you will see a screen similar to Figure 1 below.
     Figure 1. Windows 7 Control Panel

• HP OfficeJet Pro 8610: Printer cannot connect to the new wireless network

  I got the OfficeJet Pro for a while and everything worked very well (including wireless printing from my Mac and iPad AirPrint). Yesterday, we got a new Modem Router (from Ubee). As I tried to connect the printer with the new network, I fail miserably.

  Here's what I've tried several times: on the small screen of the printer, I select: Network Setup > wireless setting > Wireless Setup wizzard. The printer seems to networks, find the network and asks me the password, I get the password (I did this several times, so no typos!). The printer then "trying to connect to the network"... then it crashes: for a very short moment, I get a blue screen with a white error code (not always the same, for example.) B3FF3802) and then the message "error in the printer, turn off the power, then press.

  I turned off the printer and turn it back on several times (incl. pulling out the power plug and restart after a while), but when I go through the steps above, but I just get the same endresult.

  I deleted the old network as I feared it might interfere with the creation of the new network. No noticeable effect.

  I printed the "results of the wireless network test," which confirms that "your HP printer is unable to connect to your wireless router. In the results of the diagnosis, he states that 'network name (SSID) was found - Fail.

  I quite understand the message that the printer detects the network and shows good SSID / network name. I thought to enter the SSID manually but can't find where I could do.

  I'd be very grateful for any suggestions on what could be the problem (I can't imagine that the printer would not work with a new router... I searched the internet and found stuff on 'Hello compatibility', but do not know which is the issue I'm facing.

  Thanks for your help!

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• 5525 printer cannot find the wireless network

  Help

  I'm not good with technical stuff and need help with this problem.  Printer works well before going on holiday - power off, including the CISCO router when we went away--returned and turned on any return, printer will not connect to the router again.

  Have reinstalled router without result.  All other computers, phones, etc. to connect to the router fine.

  Wireless network test that the MAC address filtering is enabled, they suggest however have checked this and it's not.

  Wireless configuration wizard can find the network but it just seems impossible to connect to him.

  Please assume the lowest level of technical understanding when you reply!

  Thank you

  Hi K27,.

  I see that you are having some problems getting your Photosmart 5525 reconnected to your network after just unplugging a bit. I understand that you have your information wirelessly, but I don't want to set a link here which will take you to our HP print and doctor Scan, which can help you check some things on the wireless network.

  Since you already feed the router to bike, I would recommend restoring the default values of network on the front panel of the printer. You'll want to have your printer on the home screen (should say Photo, Apps and copy). On this screen you want to touch the key/tool icon in the upper right corner, then you want to click on wireless and made scroll down looking for default network. Once you click on that it will ask if you are sure and you want to say Yes. Once that is done, I would recommend the router/printer power cycling tips that were previously provided and then run the wireless configuration that you've been already and it should be able to connect at this time.

  That should hopefully fix it for you, so let me know what happens and I wish you a nice day!

• Printer cannot find the network

  I just bought a new printer HP Photosmart 5514.  I tried to connect to my wireless router, but he can't find it. I checked to make sure that the router was conducted, it was broadcasting the SSID and I have was close enough to receive the signal. Everything was ok, but it has always failed. I still don't see it.  (On a side note, 2 laptops can see the router and another 1 laptop can't see the router). I think I might be missing just a setting somewhere but can't find it.  Help, please!

  I have a Linksys WRT320n.

  Wireless broadband: 5 GHz
  Network mode: mixed
  The network name (SSID): wire78
  Channel width: Auto (20 & 40 MHz)
  Channel: Auto
  SSID Broadcast: enabled

  Security: WPA2 Personal with a password

  MAC filtering: disabled

  I found the error.  I needed to have the band Wireless 2.4 GHz.  Fixed both the problem of connectivity to the printer and the laptop that did not see the network.

• Printer cannot find the network (iPad)

  HP3050A can't find my airport network. I'm trying to print from the IPad displays-there of printers available in configurations

  OK, I did a bit of homework on this and spoke to the team of Mac here at HP.  The iPad can not implement it (and a few other HP wireless printers) to connect to your wireless network.  I'm sorry.

  You'll have to borrow a computer to configure the printer.  Once configured, your iPad can use very well.

  When you get the computer home, first, click the button on the front of the printer wireless and choose the default settings.  You will have a time of this point for the installed printer.  Download the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

• C4780 wireless printer cannot find the access point

  I have c4780 wireless printer.  It will print fine using the usb connection, but has never printed wireless.

  PC operating system is Windows Vista.  Wireless router is the linksys WRT54G.  The printer does not see the access point.  The security mode of the router is WPA Personal.  I have a unique SSID.  ISP is Timewarner Roadrunner.

  How do I get this to a wireless connection?

  Try this firmware update.

  In addition, sweat you are broadcasting your SSID and not using MAC filtering.

• HP DESKJET 2540: My HP printer connects to the wrong wireless network

  Hello

  I use a MacBook Pro, OS X 10.9

  I have a printer HP DESKJET 2540

  I just installed a new network at my place. I'm trying to connect my printer to this new network wirelessly via WIFI.

  BUT the printer keeps on connecting to the previous network, which is an open access network (FreeWIFI)

  I've tried EVERYTHING. I pressed simultaneously the Wireless button and the button to launch the copy in black. The wirelss test report shows that my printer is currently always logged the previous SSID

  Help, please!

  TX

  Hi @JACE1,

  Welcome to the HP Forums!

  I understand that your HP Deskjet 2540 guard wrong wireless network connection. I'm happy to look into this problem of connectivity for you!

  On the wireless test report, must be an IP address from the printer. Try putting the IP address in a web browser, such as: Safari or Firefox, etc. You should see a built-in Web server. Find the network tab and then select it. Then, look for the wireless configuration wizard option. (This should be able to search for the network wireless appropriate for you).

  See page 55 of the User Guidefor more details your printer.

  Hope this solves your problem and have a nice day!

  "Please click the Thumbs up icon below to thank me for having responded."

• locked settings by the adiministrator system and unable to connect with the new wireless network

  I changed my ISP and routers.  I need to change the settings to the new router wireless.  However, when I try to access the network settings on the printer through the screen on the printer, it is said that it is locked by the system administrator.  I am the admin.  Where can I access it without being on the network?  I tried to reset to the default values of factpry, but the same problem exists; It is blocked by the system administrator.

  I was able to solve the problem.  I went through the set up using the USB cord.  Then I switched it to wireless technology.