B570 display fails after the display dual display

Similar Questions

• CCC and AMD graphics card failed after the driver update

  I have a HP Pavilion dv6 laptop 6 c-32eg.

  I recently tried to update my GPU driver, as was necessary to run a particular program (oclHashcat, if you're interested). I downloaded the installer from hereand he ran. It looks good, but after the required reboot, the screen resolution has been set at 800 x 600, instead of the usual 1366 x 768. Then, I got an error message saying something in the sense of "your AMD driver could not be installed because you do not have the required equipment. In Device Manager the GPU was something like "usinig windows has stopped this device because it has reported an error."

  If I try to open the CCC, the program runs for several minutes, with a relatively high CPU usage in the Task Manager, then the message "' Catalyst Control Center: the host Application has stopped working". "

  I have now tried different ways to solve this problem, which none have worked. Try to download a driver on the AMD website did not work, because the site said that the pilot was not appropriate for a computer with switchable graphics.

  My laptop doesn't seem to be using the AMD GPU as you try to run games as a test done drip slowly and with a minimum resolution.

  My laptop has doubled (switchable CCC) graphics:

  -AMD Radeon HD 7690 M XT card, with a 8.882.2.3000 driver version and date 30/09/2011.

  -And Intel HD Graphics Family, with, apparently, the same driver version and date as shown above. I can't know exactly what kind of GPU Intel it is.

  I also tried to update the graphic driver Intel, to see if that would fix the problem at all, but it made it worse: the screen become very red and low resolution. I fixed that by returning to a point just before performed system restore. Unfortunately, I don't think to do this before initially updated drivers.

  So, my question is: how to I find the full use of two graphics cards?

  Here is a copy - paste of my information system:

  Spoiler (Highlight to read)

  The performance Information and tools
  More details on my computer
  Component Details subscore Base score processor Intel (r) Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low memory (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 5861 MB Total graphics games Graph available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home Premium
  
  System manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC Total amount of memory 8.00 GB RAM type system 64-bit operating system number of processor cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD adapter type chart display)))) chart Intel(r) HD Graphics Family total available graphics card dedicated 6373 MB memory 2560 MB memory dedicated system memory 0 MB Shared system memory 3813 MB Display adapter driver version 8.882.2.3000 monitor main resolution 1366 x 768 DirectX version DirectX 10
  Information on the performance and tools more details on my computerComponent details subscore Base score processor Intel Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 graphics games 5861 MB Total graphics memory available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home PremiumSystem manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC type system memory 8.00 total GB system RAM, 64-bit operating system number of processors cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD graphics Intel(r) HD Graphics Family Total graphic card available 6373 MB memory dedicated graphic 2560 MB system memory)))) dedicated memory 0 MB shared system memory 3813 MB version 8.882.2.3000 type graphics card driver monitor main resolution 1366 x 768 DirectX version DirectX 10

  Hello

  There may be a 3rd option left that you can try for one more set to gpu driver updates, but I would first get your system to a State where the switchable graphics work correctly.

  Try restoring the system first.

  If this does not work, the driver package AMD (containing two gpu drivers) you need can be downloaded from HP on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

  In this case being able to find a game more set to driver updates, many people with your type of switchable graphics succeeded with the offers on the 3rd party site - I strongly recommend to read the Manual to get an understanding of how it works and why driver signature enforcement must be disabled in order to load these drivers.

  http://leshcatlabs.NET/

  Kind regards

  DP - K

• vCenter Storage Monitoring Service Service initialization failed after the upgrade from 5.1 to 5.5

  I recently upgraded from vCenter 5.1 to 5.5. After the upgrade, I started getting health warnings for the VMware vCenter monitoring of Storage Service that say "failed to initialize the Service." I restarted the vCenter server and restart services several times and who has not deleted the question. When I look in the SMS. LOG file there is no activity in it since I did the upgrade (a week or more there). All prior activity in the SMS. JOURNAL seems to be well upward until the upgrade took place though. I found at least half a dozen KB articles that describe the various reasons why this error may occur, but they all relate to older versions of vCenter. Just to be complete, although I saw the symptoms in the articles and none of them really seem to be the same as what I see. My hypothesis is that perhaps the SMS did not get properly re-installed upgrading because I don't see any SMS subdirectory in the directory \Program Files\VMware\Infrastructure\tomcat\webapps but I do not know if this directory must exist on a 5.5 installation.

  If you would be grateful if anyone has any advice for troubleshooting for this type of error.

  Thank you

  Mike

  Change the credentials of the service account for VMware vSphere Profile-Driven Storage Service to those used to start the VMware vCenter Server service and the service of VMware VirtualCenter Management Webservices. By default, the account used Local System.

  Restart the service, the change was made, and then check.

• Adobe Pro update fails after the implementation of software restriction policies Cryptolocker - need to trouble

  Hello everyone

  As part of our protection against the virus Cryptolocker for the rapid spread, I added an object of group policy with strategies for Software Restriction against the execution of files in the temporary directory used by Cryptolocker:

  %AppData%\*.exe

  %AppData%\*\*.exe

  %LocalAppData%\*.exe

  %LocalAppData%\*\*.exe

  for example the directories %APPDATA%\microsoft\windows\sendto and %LocalAppData% variable and a level here

  I also blocked the executables to run within different programs 'zip '.

  I learned later (second hand) that Acrobat Pro and Adobe Flash updates have been blocked by this SRP.  They get an explicit message or fail with another error.  The update download correctly, but when you try to install from the system tray icon, it fails.

  If I'll find the downloaded file. MSP file (I have Acrobat Pro 10, so mine was in c:\program data\adobe\ARM\Acrobat_10.1.5) and click on 'Install', it installs successfully.

  We have an administrator is not restricted, but do account updates for people is not a good long-term solution.

  Can someone with experience with this please tell me if there is a specific executable or executables that I can 'whitelist' by adding to my strategy of Software Restriction as a file "without restriction."  The kicker with the 'white list', it's that I need to bless a specific executable (for example I can't quote a directory or give wildcards... There must be a path and the fully qualified name).

  NOTE: We have for most of the Windows 7 machines (no Win 7 is Vista have so the same user directory structure) and a mixture of Acrobat 9 Pro, X, XI

  Thank you very much in advance for your help.

  Updates, most is the MSI file. In all cases, you succeed to make manual updates of http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows. Download the most recent update (each update will tell you the necessary previous version where you can ignore some). Then perform updates in the order. Simply restart after the update is complete.

• Successive connection LDAP fails after the first LDAP authorization: with wrong password

  Hello
  
  I am currently integration Oracle CC & B utility to LDAP (Sun Directory Server java - SunOne), but I made a post here because CC & B delegates the task of authentication to the server Weblogic (I user WLS version 10).
  
  In Weblogic, I configured two authentication providers:
  1. the principal is the LDAP authentication provider (defined as optional control indicator)
  2. secondary education is the default authentication provider (defined as optional control indicator)
  
  Currently, some users of CC & B are stored in LDAP, and some other (more users system) are stored in the default authentication provider.
  
  To help you make the problem more clear, I did the test with followingscenario:
  1. user LDUser2 (stored in LDAP) login with correct passwrod-> success
  2. the sysuser user (stored in the default authentication provider) connect with incorrect password-> access denied (what is good and normal)
  3. the LDUser2 (stored in LDAP) user login with password-> successful OK
  4. the sysuser user (stored in the default authentication provider) connect with correct password-> successful OK
  5. the user (stored in LDAP) LDUser2 connect with the incorrect password-> denied access, which is normal. However, from this point, the problem starts
  6. the user (stored in LDAP) LDUser2 connect with the right password-> rejected access KO is the problem
  7. connection (also stored in LDAP as LDUser2) LDUser1 with the right password of the user-> big problem of access denied KO
  8. the LDUser7 user (stored in the default authentication provider) connect with the right password-> successful access
  9 restart the server resets the situation, but once a user is stored in the LDAP connection with a wrong password (5 point number), attempts by users stored in LDAP fail.
  
  It seems that after the first LDAP authentication with wrong password, all users stored in LDAP connection attempts will fail.
  
  Help, please.
  Thank you.
  
  Jeffry

  Hello

  The connection attempt is made on console weblogic with the same result?

  If I'm not wrong, until WLS 10.3 it is a problem reported where once the user connects with password and username incorrect, all attempts after that results in the failure of the connection.

  The patch is available with up to 10.3 WLS support

  This might be the question however need to check.

• Adobe DC installation fails after the most recent Windows and Mac updated

  During the installation of package (Adobe Creative Cloud) process stops, and then comes back.  Installation seems to be failing when the version check.  Tried the package and install separate;  No compatibility not test Adobe CC cleaning tool are able to correct the problem. Compatibility mode installs all applications except Adobe DC.

  Resolved for Windows 10.  Suite cannot be installed using MSI, instructions included with the configuration application require it be used.  Unable to solve the problem with the iMac OS 10.11

• OHS start fails after the update of the portfolio

  Hello

  We try to change the SSL configuration for a standalone OHS 12.1.3 install on Windows 2008 R2.  This configuration change in question create a new portfolio and the case of confidence add appropriate using orapki then the parametres.conf update.  Attempt to restart the component of fails with the error:

  [OHS] [ERROR: 32] [SST-2054] [MOD_SSL. C] ... Init: () a full restart is necessary when wallet filechanged on-the-fly!

  We thought that this meant the server should be restarted, but it does not solve this error.    Someone else has encountered this error and how to solve?

  This brings me to another question: should use us a provided Oracle administration tool to update the settings ssl instead of manually update the fichier.conf?  If Yes, what is the appropriate tool to use when the SST is installed as independent?

  Thank you-

  Scott

  It is due to missing libraries in windows OS that prevents OSH to start in FIPS mode as below bugs

  bug 18895629
  bug 18875548

• HDR and Panorama fail after the upgrade to Windows 10

  After the upgrade to Windows 10, trying to merge pictures gives the message "unknown error occurred".  After the first attempt, I've updated my driver graphic card, and HDR worked.  But the next time, the error message reappears, and this has been consistent - if the graphics card is engaged or disabled!  My graphics card is NVIDIA GeForce GT 750 M.

  The problem turned out to be unrelated to Windows 10.  For reasons I can't understand, it is limited to one set of photos taken on a single morning. So, no problems with Windows 10.

• WiFi connection on c4580 fails after the automatic vista update windows.

  Hello

  There is a month my c4580 perfectly work on WiFi stoped working

  the reson seem to be updated auto matic windows, if I do a system restore the functions of the printer again, but a few days later, the connection went after an auto matic update

  to remedy this, I tried the following

  Following the recommendations of HP

  removed the Hp software and then try to install the drivers again after the download from their website form HP

  tried to install all updates firmware of HP

  tried to install without Firewall (bullguard)

  installed the latest firmware on my Linksys wifi router

  But still no luck

  the printer works perfectly on USB, but if I try to put it on wifi with the installation software stops

  It goes well until after I give my network key, and then it opens the network and communicates for a wile

  the last audit it does is trieng to connect to an IP address, then it stops telling me to fix the connection with the printer

  and the hp software is not responding so I have to restart my computer...

  I have no idea of what I can try again

  Help!

  Thank you

  Niels

  If you have the original CD, it get a L3 uninstall program and run that.  It will remove completely from your software.

  Reinstall the software from hp.com.

• Updates failed after the new HD install

  I live in South Africa and use a MacBook Pro bought in the USA by the end of 2014. When I had to replace the HD in December 2015 the company is certified local Apple had to order the HD of the USA. After installing it, they restored my software and data files and mails in Mail.

  Since the replacement of HD that I was not able to install updates because after that I give permission to update, I get a notice that no update is available under "this Apple ID" or something to that effect. After 8 months of updates failed my HD is slow again with my computer freezing temporarily and the color wheel - wait please turn from time to time. What should I do to allow updates succeed?

  It seems that an another Apple ID that yours has been used when the HD has been replaced.

  -Backup your data on an external drive

  -Start the recovery of the Internet

  On OS X Recovery - Apple Support

  by pressing Command + Option + R at the start of the OS X Internet Recovery*.

  If start you only on the recovery partition, you may have same problem

  then format the boot disk and install OSX. During the installation of recovery of the Internet, the version of Mac OS x installed is what came initially with the Mac. For example, you may need to update/upgrade via the Mac App Store

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Satellite A300 - Webcam driver open fail after the upgrade to Windows 7

  Hello

  Given that I improve my system to Windows 7 64 bit does not work my webcam. After installing the driver I get the message "webcam driver open failed. "Please restart camera or computer. The camera also do not appear in Device Manager and the microphone are not working also.

  I have a Satellite A300-1LT.

  Help!

  Tal

  Hi pro.surfer,

  You know the forum search? If this isn't the case, you must use because you will find many threads with this error message and lots of useful training, what to do to.

  I put t know which driver you mean, but you need the Camera Assistant Software for webcam. The microphone is a part of webcam, so you need to install the driver for the webcam. ;)

• [BUG] Unlock failed after the attempts of wrong PIN. However, Message for "SONY" is very often

  Yesterday, I got the Z5 in my pocket and it is turned on (double tap to wake up) and he got the wrong PIN code. A message popped up telling me that the unlock code has failed and I have to enter the word "SONY" to continue. After that, I can enter the right PIN or a fingerprint can unlock the Z5.

  

  Now, whenever I restart the device I get the same message, and sometimes when I want to open the Z5. Is there a solution to this problem?

  Hello

  This seems odd. You should only get this popup if they enter their PIN wrong too many times. This is a feature we've added to prevent accidental data deletion when you have an Exchange account that applies it.

  Could you try to delete the account you have that apply under settings-> accounts, restart the phone and then add the account back again and let me know if that helps?

• Partition recovery system fails after the first start

  I just purchased and receive the laptop next: Pavilion DV7-6C95DX. I went through the Setup program and then created recovery DVD.

  After playing with him for a short period, I decided to try to restore to factory using the recovery partition and F11 State when starting.  This started the Recovery Manager, which (according to his Checklist), reformat the Windows partition, copy the files required and restored the file on the hard drive.  Then it prompted me to restart and complete the process, which I did.

  When starting, it reported that he immediately reported "Windows could not start...". "Status: 0xc000000f... a necessary device inaccessible."

  I pressed Enter to continue and the screen says "choose one to start operating system... "and he only gave me the option"[active EMS] Ramdisk Options"choose it brings back me to the previous screen and so on.

  So, I tried using the recovery media that I made earlier.  Who started Windows and Recovery Manager reported the following: "this computer does not support the system recovery media. You are not able to restore this computer with the media"there was a code below that read"0110-A6X02UAR #ABA - A6X02UA #ABA"

  Apparently, there are two problems - the reecovery partition does not work and the recovery media does not work.  I don't know if they are related, but in all cases, the computer is now unusable. It's less than a week.

  Thanks in advance for any advice to fix this.

  Hi Lance,.

  This error can occur if there are USB devices or media attached to your laptop cards.  If this is the case, remove all connected to your laptop then repeat the recovery process.

  If the above is not relevant, I would try the following to rule out a hardware problem.

  Before you try the following, make sure you can read the activation code on your label Windows COA (5 blocks of 5 alphanumeric games).

  Assuming that it's just a problem of software with the recovery process, it is a job before right around if you have (or can borrow) an installation disc Windows 7 at retail which is exactly the same version as your OEM installation - IE if your laptop comes with Windows 7 Home Premium 64-bit, it comes to version exact commercial that you would need.

  If you don't have access to a retail disk, you can create an installation disk yourself using another PC - just download the good Disk Image from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Additional drivers, you may need to find from here.

  If this also fails to install Windows, I would simply return the laptop to the retailer, he bought at and get a replacement while you are still on time where it is an option.

  Kind regards

  DP - K

• RESUME downloading files always fail after the last update.

  Right click on the download file and click on suspend, then right click again and choose RESUME is not resume the download, it says failed. I tried many downloads all of them are failed, but before the last day it's work very well.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• In Win7 login fails after the password prompt

  Hello
  Sorry for my English, I'm french.

  I couldn't find all the technical problems sections so I post here for this:
  When I start the laptop, I fall on the win7 password screen, log in as I usually did, (it worked fine until yesterday) and then the screen says welcome and that's all. I have the blue circle 'win7 wonders' which means the work of the CPU, I see the HDD led flashes cyclically but it just hangs there.
  I rebooted after waiting 15 minutes. Work in failsafe mode, connect and started Avast anti-malware Malbytes and CCleaner and "free Registry Cleaner for 7. They took off some malicious programs and got rid of concerts wasted like temp files/folders.

  So I restarted as MalwareMalbytes asked, but it would always work in 'normal' mode (held in suspension looooong)
  Back to integrated security, I'm redoing all antivirus and malicious software and reboot the pc to the end.*
  Still it hung. I rebooted. At the command prompt to the integrated security mode, but I was upset and did not go for the integrated security mode but normal... it worked and recorded most of my personal files and I'm here to find a solution.
  I've had this laptop for toshiba was sent after a HARD disk failure. I am pretty upset by problems with this laptop. I love my Qosmio, but he doesn't like me back.

  If anyone has had this hanging welcome screen and found a solution, that would be fine to give an answer.
  Thank you.

  Hello

  Maybe it's just a BONE problem.
  Try to retrieve the laptop using the recovery disk or recovery disk you created probably in the past.

  To start the recovery of HARD drive, turn on the device, press F8 choose repair my computer, then HARD drive recovery.
  This would create the device to the factory settings.

  Your comments and good luck would be appreciated.