Back to my Mac drive remote access

I tried to set up my Time Capsule and the hard drive connected to it to be accessible on the internet via Back to My Mac. My Time Capsule is the main router and the modem to the ISP provided is in bridge mode. I followed the instructions of installation to the letter, but it still not connect when I try to on the internet. I tried to connect life iPhone tethering and friend home as well with no luck.

Tried to help out a little and when I go to the iCloud tab in system preferences, I get the following message on the CCMM: Back to My Mac can be slow because multiple devices on your network provides network services. Turn off NAT and DHCP on one of the devices and try again.

The problem is that NAT is enabled, my Time Capsule is set up for back to my Mac and I enabled sharing of files on it, as well as on WAN access records. I also tried the deactivation and activation CCMM on both Time Capsule and in settings iCloud, still the same error. My only goal is to be able to connect to the Time Capsule and access the files remotely.

I hope someone can help.

Thank you!

provided the ISP modem is in Bridge mode

It may or may not be, because ISPS generally have some strange ideas about what the term "Clipping" might mean.

What is the number and model of your modem?

If all goes well, it is a simple modem.. .with a single Ethernet port the device... as in the example just below, which is the type of device that you really need to be able to access on your network from the Internet devices.

I hope once again, it is not a type of modem/router or gateway device, which combines the functions of the modem router and separated in one package... as in the example below. Often, it is not possible to configure this type of law only as a simple modem device... and what the ISP calls 'Clipping'... is not really. Thus, you're left with a problem NAT which slows down and restricting remote access.

Tags: Wireless

Similar Questions

  • My Mac has been hacked, abrupt configured mailboxes. Remote access?

    Yesterday on my Mac a sudden notice appeared saying Exchange mail has been added. It was my old College e-mail although it should no longer be valid. Then a pop up says something invalid certificate and a person is faking d'[email protected]... Etc. Who is my former college. Then I tried to print something, and he says he can't trust my local printer and it took forever to print a document. Then 2 pop ups asking if I don't mind garguillo and other netbios to receive s of incoming connection, which I refused. I unplugged and changed the password of my iCloud. I don't have on the sharing options and I never configured this old email on my new Mac Pro retina. Is it possible, he had remote access? What could have happened? What are the main precautions to be safe on Apple devices? Can someone list them? I'm really worried. I have kaspersky from App Store download.

    A

    The first step and perhaps the only necessary one, is to get rid of your software "anti-virus". All these software are worse than useless on a Mac, and it may well be the cause of the problem, or make the problem worse.

    Please remove "Kaspersky Security" by following the instructions on this page. If you have a different version of the product, the steps may be different. The product includes a Safari extension which may not be revoked by the uninstaller.

    Back up all data before making any changes. Never install a software "anti-virus" or "anti-malware" again.

    B

    Verify that the date (including year) and the time indicated by your system clock is correct.

  • Is it possible to remote access to files on airport time capsule without a great second computer mac at home?

    Hello!

    I read the articles on access distance to another mac, but what I need is to remote access to files on airport time capsule without a great second computer mac at home.

    Only Mac... Mac you will use for remote access to files on the Time Capsule... is necessary.

    Set up and use Back to My Mac

  • Is it possible to remote access to my Mac Boot Camp partition?

    I know this may sound stupid, because my Mac partition is offline due to Boot Camp, but I just wanted to know if it was possible to remote access and open terminal applications / mac from my Mac at a training Camp. I don't mean for the use of Google Drive either. Looking something like a reversal Parallels/VMware.

    Hope that explains it.

    Too bad. I found a solution. Used Paragon Software HFS + to access and modify the shared files of Mac in Bootcamp.

  • Back to my mac: get the files from hard drive

    Background: I tried to copy files from an external hard drive to iCloud. I didn't have no idea of back to my Mac has been verified (or even existed). When I dragged the files to iCloud it copied but it fills my iMac's hard drive. I need this 70 GB of available disk space.

    I disabled the back to my Mac and free memory in the iMac icon box is up GB 0.01 every 15 minutes. At this rate, I'll get an answer to this question before I know if it is significant or not.

    Question: Where are these files on my iMac drive? Are these files on my iMac drive? I can not find them. If they are there, they disappear or I have their garbage?

    Thank you.

    If their trash, they will be deleted to iCloud. Check your document mobile/library username.

    Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library.

  • Remote access client 2.0.1 for Mac OS 10.4.11 connection to the remote server running Windows Server 2008 R2

    I have a mac with OS 10.4.11 and I try to access a remote server running Windows Server 2008 R2.  I have installed, uninstall and reinstall the Client of remote access for Mac 2.0.1 but I can not connect.  My network administrator tells me that Mac OS 10.4.11 is so old and useless that I am better just throw my computer and buy a new one in order to solve the problem.  This is absurd.  Can you help me?

    Hi Benjamin Spicer,.

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please post your question in the Forums TechNet Remote Desktop Services (Terminal Server Services).

  • Impossible to connect remote with back to my Mac

    I already followed the instructions from Apple to set up my MacBook Pro (El Capitan) at home to enable Back to My Mac and when I'm at work That MacBook Pro of David duly appears under shared in the Finder.

    I must have done something right I can do split screen works perfectly by entering my username and password but I can't to connect under... work, whenever it says failed to connect.  I do something good like if I type the word password then immediately for this shimmer/shake to say it's a mistake.

    The domain name of my computer at home is Davids-MacBook - Pro.local and I tried to enter the user name:

    Anson Davids-MacBook - Pro. local\David

    Anson Davids-MacBook-Pro\David

    David Anson


    but all in vain


    No idea where I am going wrong?

    I can't use back to my mac, because most routers hotel will not support its use (when else would need her after all?)

    I have everything on computers configured properly.

    Back to my mac works fine in your own home-no, not so much.

  • Scope of the wireless connection for remote access to TimeCapsule

    I use my TimeCapsule as long wireless rather than "create a wireless network, as my ISP does not allow for the time capsule to use as my router.

    I post this question because I would like to access my TimeCapsule remotely and the hard drive connected to it.

    Now I'm Back to Mac enabled on TimeCapsule and what I believe is the appropriate port forwarded port to allow a connection outbound to it, but cannot be accessed remotely to the TimeCapsule. Any ideas?

    Two problems here:

    (1) the "extend a wireless network" is a defining Apple owner who is only used if the Capsule is wireless extension of the network from another router from Apple. It is not compatible with the wireless to a 3rd party router.

    This parameter must be "create a wireless network" using the same wireless network name and the password of the wireless network FIOS with time Capsule of the FIOS router by a permanent connection, cable connection through an Ethernet cable.

    (2) the time Capsule is configured to act as a router, when it should be configured to act as a "bridge"... Since you already have a FIOS router 'upstream' on the network. If the Capsule is configured as another router on the network, which creates an error Double NAT on the network, and it is unlikely that Back to My Mac would function at all in this type of installation. The setting for the time Capsule router Mode must therefore "Off (Bridge Mode).

    Since the Capsule must be in Bridge Mode to work properly with the FIOS router, it's the FIOS router that must be set up for Port Forwarding. Then, in Bridge Mode time Capsule will cross the FIOS router to your network equipment settings.

  • Problem with remote access to Time Capsule

    Hi, I need to set up my APTC in a way to access it on the Internet remotelly.

    I did the following:

    • router Huawei HG622u
      1. activation of NAT
      2. port mapping
        • Protocol: TCP/UDP
        • External start port: 8888
        • End external port: 8888
        • Internal host: the TC's local IP address
        • Internal port: 8888
        • Name of the Air Port TC map
    • APTC (latest firmware installed)
      1. definition of back to my Mac: my Apple ID and password - Green State
      2. definition of APTC in Bridge mode
      3. disc of shared configuration
    • on Mac
      1. definition of back to my Mac - no comment illustrates iCloud

    When I try to access the APTC from the Internet, I see CLTS in Finder/shared section. But when I try to connect, I get the message that the connection failed.

    Could someone advice whot shut I do to make this work?

    Thank you, Eduard

    router Huawei HG622u

    1. activation of NAT

    If it is possible to run your modem without NAT, that is to say fill so that the TC is the main router, will be much more successful than to try to convey the CCMM via a router.

    CCMM if I understand correctly, he must use many more ports... but it is very difficult to get a TC behind a NAT router to work. While Apple says that a computer will work behind a UPNP router, a TC will NOT... There is no UPNP integrated with open ports.

    Get help using Back to My Mac - Apple Support

    Browse through the list...

    TCP and UDP ports used by Apple software - Support Apple products

    the following ports must be open.

    TCP 443

    UDP 500

    UDP 1900

    4488 TCP

    UDP 4500

    5223 TCP

    5350 UDP

    5351 UDP

    5353 UDP

    49512 TO 65535 UDP

    Of course, not all these ports are needed... This is why it is preferable to install the TC in order to open the ports it needs.

    There are other methods of access remotely with the help of the CCMM... and simply transmit AFP TB is the best. I think you're confused or confusing instructions.

    Airport drive - remote (3 methods)

    It seems you are trying to use method 3, but not all do it properly...

    8888 has nothing to do with the CCMM or AFP. Tesserax chose him as a port to be used for the translation of the AFP 548 port. You did no translation of port. There is nothing in the TC to meet 8888... 548 alone will work.

    And this has nothing to do with the CCMM. While let... do try and use both methods of access on top of the other. This gives a big mess.

  • May my end 2011 MBP running 10.11.5 El Capitan using Back to My Mac to see my 2006 Mac Mini running Snow Leopard 10.6.8?

    I want to be able to access my Mac Mini to the road, but it supports the latest OS is 10.6.8 which was at the time of MobileMe. How can I use back to my mac to access the mini?

    Thank you!

    I suspect that Snow Leopard 10.6 doesn't have access to iCloud, so set up Back-to-My-Mac might be a problem.

    You can use (free for personal use) TeamViewer.com screen sharing and transfer between your 2 file systems.

    <http://teamviewer.com>

    Try the current version on both systems, but if you have you can also get an older version for Snow Leopard system

    <https://www.teamviewer.com/en/download/previous-versions/>

    It is otherwise more complicated for remote connections, to open ports in your personal router, setting up secure ssh tunnels, etc., but it is really something for people who love to get down and dirty with pieces of computer

  • remote access MacMini... MOM help

    Question: how to set up remote access to the computer of my mother, so that I can address any technical questions she has?

    I have an iMac end 2013 with El Capitan 10.11.5.

    My mother's computer is a mac mini upgraded to 8 MG of RAM and also with El Capitan (do not know if there were other updates since I was there last).

    I would like to be able to connect to the remote computer in order to see its screen and be able to help in updates remotely.

    I heard that El Capitan was the built-in ability, but I wanted to know how to put in place.

    Thanks in advance for your help.

    MOM help

    Set up and use Back to My Mac - Apple Support

  • alternatives to LogMeIn Pro for remote access?

    Greetings.  Currently, we have systems in the United States, Switzerland and the Mexico that I supported via remote access using LogMeIn Pro.  We paid for a subscription before free LMI Pro has been abandoned even to appreciate the characteristics of LMI Pro.  But as LMI has eliminated this free service, it seems their subscription rate more than doubled each year.  We currently need remote access to 3 Macs and 2 units of Windows (ew).

    Last year, we paid $174. for the annual subscription in support of these 5 systems.  I just checked on the price of renewal and it shows $349.00 for renewal.  This is getting too expensive!

    Last year, I invested in ARD to support my mother MacBook and the MacBook from an old friend, rather than pay LMI for a subscription in support of these systems.  ARD was a good alternative for these systems, but it is not a realistic alternative to remote systems for charity I help support.  Partly because of the PC, also because what it requires port forwarding in the router and finally because I have to be at my computer to use ARD to access those other systems.  LMI offers the possibility to access systems through an iOS app and can be used by other members of the team of charity, anywhere in the world everyone is physically located.  That's why we have maintained the LMI Pro subscriptions for a number of years.

    But with the perennial increase rate of LMI ridiculous (I think they can take their pricing of Obamacare), I'm on my eternal quest for an alternative to remote access.

    Can anyone offer advice?

    Thank you very much for your review,

    Dee Dee in Florida

    There are:

    -Apple Back to My Mac

    Set up and use Back to My Mac - Apple Support

    -Team Viewer free for non-commercial and paid for commercial use.

    -GoToMyPC, it also works with Mac

  • I gave remote access to a scam.  What should I do?

    I was on my computer when I got a message saying that my computer has a virus.  I couldn't use the mouse, or close the session.  My system froze.  I was told to call the number on the screen.  When I did I gave them remote access.  Pretty quickly, I knew it was a scam but they dial for a few minutes.  Should I be worried?  The scam was supported IT Aspire.

    Completely erase your hard drive and he re-partition. Reinstall a new copy of OS X. change all of your passwords. Report it to your banks and credit card companies. You can just for the re - issue new credit cards.

    A good rule to follow: If you don't know what is on the other end of a web link, then don't click it. There is no real viruses affecting a Mac, as update you OS X means that you should go to El Capitan to protect against the latest RansomWare - KeRanger.

    Identify the fraudulent email 'phishing '.

    Beware of the local browser Tech Support, Phishing scams

    Remove the browser pop up problems

    Malwarebytes | Free Anti-Malware detection and removal of software for

    Apple Macintosh computers

    Adblock more 1.8.9, GlimmerBlocker, or AdBloc k

    Remove the adware that displays pop-up ads and graphics on your Mac

    How to remove adware FlashMall of OS X

    Stop advertising and pop-up advertising windows in Safari - Apple Support

    2.11 DetectX

    Useful links about Malware problems

    Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

    The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

    Difficulty of pop-ups in browser that support Safari.

    Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

    Quit Safari

    Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

    Relaunch Safari

    If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

    It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

  • stop windows remote access connection and access the CD dirive

    I use windows 7 ultimate 32 bit OS

    There is a problem called "windows remote connection" which is not allowing me to access the CD drive for CD writing

    no disc burning software nero8, ashampoo burning studio, power iso; None of them can write data to dvd using my dvd burner

    I need solution; What kind of sequrity program is this "Windows remote connection?

    Here's how to turn on remote desktop (and therefore, how to disable - just check the other box):http://www.howtogeek.com/howto/windows-vista/turn-on-remote-desktop-in-windows-vista/.  See if the ' turn off resolves the problem.  If necessary, try to turn off remote access as well (above) - If this does not work, put in the less remote access back on (you may need it if you need someone to connect to your computer for assistance - as your ISP or Microsoft Support or even a computer repair shop that works remotely).

    This isn't a security feature, but a function of access to allow others on the internet to connect to your PC and you can connect other PCs (and show their desktop and work with their mouse on your computer - or they can do the same with you the authorizations if many use other 3rd party software to do this work easily and smoothly).  FYI, here's how to use remote desktop in Windows 7:http://forums.techarena.in/guides-tutorials/1187281.htm.

    If this does not work, please repost your question in the Forums Windows7: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Cannot Log In messages, FaceTime, or back to my Mac

    I think I'm finally at the end. I'm a longtime apple forums reader but a poster first...

    So I was reading through forums all day without success. Here's the situation:

    -In early 2011 MacBook Pro

    -OS X 10.11.4 El Capitan

    I tried everything I could find all the day, including:

    -Reset NVRAM

    -Signing in and out

    -Complete new installation of Mac OS X (I completely erased the hard drive)

    -Start

    -Profile comments, sign in, new Admin account login

    iMessage working on my other MacBook and iPhone, but I can not connect to all services on a laptop. When I put my information, it all turns gray for a few seconds, as is the logging and then just rest on the login screen. I can do it again and again without any difference. If I say "not now" on the login screen and go to Preferences, I just get the circle icon "load" days while trying to open a session. FaceTime gives me the same "loading" circle and back to my Mac says that it cannot connect to servers iCloud.

    Even more, if I add a google account in system preferences, I have 'messages' option for the account. This option is not in my iCloud account.

    I don't know what else to do, any help is appreciated wildly. My applecare missed like 3 years ago at this point.

    See the comments and discussion at the bottom of this article for more information about this problem:

    http://www.MacRumors.com/2016/03/23/Mac-users-FaceTime-IMessage-login-issues/

Maybe you are looking for

  • East Java plug-in 12.4.1. safe to download and install?

    I'm prompted to download and install Java plug-in - 12.4.1. Is this safe to do?

  • What to do if the Droid Razr recognizes not his ' Dock

    After visiting the local VZ corporate, to fetch a long battery life for the imminent arrival of a Droid 3, my razr has ceased to recognize the dock. Symptoms included don't not the home screen for the landscape when in the car or the House switching

  • 0x8ddd0002

    When I go to the Windows update site, I get the error code following 0x8ddd0002. That I'm not the administrator. This has also happened with a few programs I want to uninstall as well. In the article on support.microsoft.com/kb 316524 all patches for

  • HP Pavilion g6-2380sa

    Having recently bought this laptop found l I did not win 8, installed win7 x 64 who have used also, most pilots win 8 worked except for the usb controller and ethernet controller, spent hours trying to find these 2 drivers without success, so would a

  • Want to Phoenix 810-135qe

    I got liketo install a four USB 3.0 ports card in my new Phoenix, but impossible to find a "tap" for a power supply to the card.  Is there a diagram of this? Thank you!!