Back to my Mac works for you after the update to 10.11.4?

Similar Questions

• Mac stops do not after the update of the sierra

  I've updated my MacBook Air (13 inches early 2015) to Sierra. After the update, it is not shut down or restart. If I click on stop, my screen goes black and the keyboard backlight is on. The judgment never ends. Its the same case on reboot too.

  Help, please. Thank you.

  Although this will help, but I have also reported this problem, like many other people:

  MacBook Air shutdown correctly

  macOS Sierra presents a serious problem that must be dealt with quickly

  Apple should give a direct response to this because it is obviously not an isolated incident.

• My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

  Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

  Hello

  Code 39 means that the driver is corrupted or missing.

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
  Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
  These however is a possibility depending on which and how many you have installed.

  Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
  allows the reader to work (not re - install until the issue is resolved).

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Why 2009 MacBook says "no hardware installed for wifi" after the update to El Capitan?

  I just updated today and after that he finished the wifi icon had the message "no hardware installed" I checked a few other places to see what I could do and I tried to reset the SMC two-way and the NVRAM and does not always help. I also tried to make the miracle of the network solution, but it doesn't even have a wifi network option. Please help, I need to use my laptop for school work on very bad Internet.

  A few things to try...

  http://osxdaily.com/2015/10/16/fix-Wi-Fi-problems-Mac-OS-x-El-Capitan/

• What Email layouts / Design works for you and for what purpose?

  There are several books on web design and usability, but when it comes to email there is a little less information.

  From my experience, the page layout (just the high-level design / position of the text and buttons) must correspond to the intention. In addition, a delicate design helps multi-device compatibility.

  A guide used in previous experience has been of MailChimp that describes the number of layout of columns and discuss the purposes. Smashing Magazine was also an inspiration with the many directives for example driven.

  What are your thoughts, what page/design layouts worked for you, reached the right click by rate or the objectives of the emails?

  Or what other design BASED e-mail do you use?

  I found that Litmus.com is a very good source of information on the subject: Tips & resources | Sunflower

• protection against phishing works for you?

  I tend to answer questions instead of asking them, but on this I need help before the problem further away.

  Please ensure that you have enabled firefox phishing proteection (it should already be enabled by default) please see:

  • http://www.Mozilla.org/en-us/Firefox/phishing-protection/

  Then please try the two test pages

  1. http://www.Mozilla.org/Firefox/its-a-trap.html
  2. http://www.Mozilla.org/Firefox/its-an-attack.html

  You should not actaully see the two pages linked above, firefox should block both. Currently when Itry in Windows 7 firefox 9.0.1 even in safe mode it is not blocking these pages. I also tried Linux and will try in good time in other versions of firefox on Windows XP.

  I would like to know if others find phishing protection as tested on these pages of firefox fails. Please try and report what is happening back, please say what OSyou are usingand what version of firefox, so convenient please test questions troubleshoot Firefox in Safe Mode(click just don't continue, no need to make changes.)

  Thanks in advance.

  Another case of Mozilla break something that worked for years (since the release of Firefox 2), without a valid reason. The change of mozilla.com to mozilla.org beat those sa-a pages, probably because everything in mozilla.org is automatically sent to mozilla.org pages now. Only old mozilla.com that I have bookmarked pages provide a good demonstration of how the 'trap' and 'attack' featured in the works of Firefox.

  https://bugzilla.mozilla.org/show_bug.cgi?id=686731 - mentions he departs a domain mozilla.com/.org of the mozqa.com domain, but trends of the discussion towards this as WONTFIX.

  https://bugzilla.mozilla.org/show_bug.cgi?id=681945 - seems to be a proposal to set up a separate domain - itisatrap.org - for these pages of 'demo', but this area doesn't seem to exist - I could not solve with a DNS lookup.

  https://bugzilla.mozilla.org/show_bug.cgi?id=710597 - is for "Setup www.itisatrap.org"and was inaugurated on 14-12 - 2011. It seems that nothing has been done to that end.

  It is an important feature in Firefox and attention better IMO on "detail" should have been made before that the variation between .com and .org was made.

  I'm tempted to buy "itisatrap.org" and "TI-is-a - trap.org' and Park to wait for offers to purchase.

• After you install the update for Vista (KB250189} why would slow down)

  After this connection to Explorer 9 update and other web sites really slows down. If uninstalling it goes back to normal but reinstalls on automatic update. Anyone else seen the same thing?

  Hello

  I would suggest hide you the update.

  Here's how:

  a. open the control panel (all items view), and then click Windows Update
  (b) after the updates of Windows, or if you are looking for updates, click on the update (s) available link.
  c. right-click on a Windows Update listed that you want to hide, and then click Hide update.
  Note: If prompted by UAC, then click on Yes or enter the administrator password.
  d. you will notice that the now hidden Windows Update is grayed out.

• After you install the update for LR cc 2015/5 AffichageOptions in the library doesn´t Module shows any type of lens. What has gone wrong?

  After you install the update for LR cc 2015/5 AffichageOptions in the library doesn´t Module shows any type of lens. What has gone wrong?

  See this thread on the official Adobe feedback site: Lightroom CC 2015: objective metadata missing when importing field. Community customer Photoshop family

• Drawing a custom profile does not work for me. It works for you?

  Drawing a custom profile does not work for me. It works for you?

  I can only apply on an existing line, but cannot make a new one with the selected profile. In fact if I change the profile other than the default uniform I also can't draw a new stroke with any other width than the default 1 point. This does not seem normal.

  Use the SC5 on a PC.

  You have "Art has basic appearance nine" checked in the appearance Panel Menu? If Yes... Clear the check box, and then try again.

• How is the new Forum Structure working for you?

  I just wanted to ask how the escape of CS5, then other versions of PrPro/Pr work for you.

  Although not all that keen on the idea, I must say it seems to work very well. I've seen a few posts in the wrong places, although some might be better suited to the material.

  My fears were NOT carried, then I'm glad that the power never consulted me, as I would have probably denied inches. Initial comments indicate that I would have been wrong.

  What do you think?

  Hunt

  PS - don't forget, 'points' are folk here!

  The forums have been working well before and are still.

  When I'm not in Outlook but webmail (which was most of the weekend), I can't follow anything other than CS5, material, and again - all CS4, CS3 etc have such a long subject line, starting with "[Premiere Pro CS4 and (State earlier version number.)]". Re: ', that I do not see what is 'true'.  It wasn't a huge problem before, because the forums under this prefix long subject were the pre Pro and had very low activity.  I didn't like it when the MODs added, but it was a small amount of positions.

  I never tried the web working list of base/forum type because Jive indigestion is ridiculously slow on all my systems.  I suffer through it to post, because I don't like the e-mail response system.  E-mail review is fast and efficient for me.

  Should I again this did fix the read system / flag?  I remember the concerns on this subject so Jive was first released, but did not care.

  I still use CS3, bought CS4 and the free upgrade to CS5, but they will not load until I have an update of the material.  But I have always followed all the forums first.  Tiz is so frustrating.

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• Today after the update of cloud five programs, all work correctly, however, Lightroom opens, but only develops, gives a message: Please reactivate your membership to enable the module.

  Today after the update of cloud five programs, all work correctly, however, Lightroom opens, but only develops, gives a message: Please reactivate your membership to enable the module.

  What and how do I do to solve this problem? Thanks in advance!

  Hello Julian

  If you still encounter this problem, please try the following troubleshooting steps.

  Solution 1: Sign out of Lightroom 5.5 and then connect back with your Adobe ID

  Solution 2:

  Set the permission to the folder SLStore & SLCache:

  NOTE: Do this twice, once each for the SLCache and SLStore files.

  Mac:

  • Use the Finder to navigate to/Library/Application Support / Adobe / SLStore or/Library/Application Support / Adobe / SLStore.
  • Control-click on the folder and choose read information.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Set permissions:

  System: read/write

  Admin: read/write

  Everyone: read/write

  • Click the gear icon and select apply to closed. Close the dialog box for information.

  Win 7 / 8 to win:

  SLStore: ProgramData\Adobe\SLStore
  SLCache:

  Win 32 bit: program files Files\Adobe\SLCache\

  Win 64 bit: Program Files (x 86) \Common Files\Adobe\SLCache\

  • In the file Explorer, right click on the SLCache or SLStore folder, and then select Properties.
  • Click the Security tab and set the permissions:

  Administrators: Full control

  Power users: all except extraordinary and a total control

  System: Full control

  Users: Read and extraordinary

  • Click on advanced and, if requested, accept the (UAC) user account control elevation prompt.
  • Click on the owner tab, select administrators and click on modify.
  • Select Replace owner of subcontainers and objects. Click on apply and then click OK.
  • Click the permissions tab, and then click on change permissions.
  • Select Replace all permissions of child object with permissions inheritable of this object. Click OK, click Yes.
  • Click OK, and then click OK in the Windows Security dialog box. Click OK to close the advanced security settings dialog box.

  Suggestion 2: Rename the SLCache folder and relaunch Lightroom 5.5

  We have followed this issue of Lightroom. Please let me know what solution has solved your problem.

  If these solutions do not solve the problem for you, let know us.

  Thank you

  Scott

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• Applications no longer work after the update of the game store!

  In my Xperia SP applications do not work after the update from the game store and shows 15 times in one minute, unfortunately "Skype/social life/mcafee/chrome, etc." has stopped working while triying to open it. This problem is started, because I updated my phone in 4.3 jelly bean.

  My phone is ok now...

  I contacted the sony Xperia care and suggested a repair.

  And after repairing its great and works without a problem...

  The solution is here...

  Dear Mr. Jab,

  Greetings from support Sony Xperia.

  We sincerely regret the inconvenience.

  We appreciate the importance of your concerns and we are here for you help.
  In response to the request of ypur, we would like to inform to run the reapair software.

  The enforcement procedure to repair your Windows computers using software and application of PC Companion:

  Note! You should always back up all data before you perform a repair of software.

  1. Download PC Companion to sony and install it on your Windows computer.
  2. Turn off the phone and disconnect the computer.
  3. Open the PC Companion application.
  4. Select start under the support area.
  5. Select the software update feature, and then start.
  6. Not found phone is displayed. Select phone repair and Connect.
  7. You will receive a message on PC companion, that data will be lost if you continue.
  8. Check the box to confirm that you have understood that all personal data will be lost. And then click Next. The application prepares the update and if necessary necessary downloads data on the web.
  9. Select your phone model manually, and then click Next.
  10. Depending on the model chosen, you will need to perform a few steps for the update for PC Companion be able to update the phone software.
  11. Yet, do not plug the phone! Note! At this point, the phone must be turned off and disconnected from the computer.
  12. Connect the USB cable to the computer, not on the phone.

  13.Xperia: then just pressed the button indicated, connect the USB cable for device theXperia and keep holding and pressing the indicated key until your device update started... appears (in some cases installation drivers appears first).

  1. If you have not correctly, do the phone turns on and proceed to the next steps, drag the bottom of the convening of the notification bar.
  2. In this case, disconnect the phone from the cable, turn it off and repeat step 12.
  3. Follow the instructions on the screen. Once the repair is completed, unplug the unit and then restart the device.
  4. Click on Next. If the repair was successful, the message this device has been updated successfully is displayed.
  5. Click Finish.

  Please contact the Support of Sony Xperia.

  Looking to better serve you.

  Kind regards.

• Desktop icons not working is not after the closure of the internet.

  Original title: all the answers - desktop icons stop working

  I'm having the same problem with the desktop icons not working is not after the closure of the internet.  Any solution yet?

  Hello

  1. from the desktop icons do not work?

  2. what happens when you try to open these icons?

  3. it happens only after the closing of the internet?

  4. do you use the Internet Explorer browser to surf the internet?

   

  Method 1: Run the following fix - it:

  Difficulty of broken desktop shortcuts and common system maintenance tasks:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   

  Method 2: Reset to follow icon cache the mentioned below as follows:

  See the following steps:

   

  a. right-click on an empty area of the desktop and click on personalize.

  b. click the display properties.

  c. under colors, select medium (16 bit) and click on apply.

  NOTE: If you have medium (16 bit) selected, then select Highest (32 bit) instead. Sometimes, you have to do a reboot first, then go to step d. try both ways.

  d. click on Yes to confirm the new setting.

  e. now, select the highest (32 bit) and click OK.

  NOTE: If you already have the highest (32 bit) selected, then select medium (16 bit).

  II. click Yes to confirm the new setting.

  To follow cache icon rebuild the below steps.

  a. Open Folder Options to select (round) display the hidden files and folders.

  b. open a Windows Explorer window.

  c. go to C:\Users\(User Name) \AppData\Local
  d. right-click on IconCache.db and click on delete.

  e. click Yes to confirm the deletion.

  NOTE: This removes the file to the trash. It is safe to empty the trash when you are done.

  f. close the window.

  g emptying the trash.

  h. restart the computer.

  i. When you come back, you will notice the size of the file IconCache.db is reduced, and the update is now the current date. (See screenshot below)
  NOTE: If for some reason any IconCache.db isn't there or the size has not changed much, then just restart the computer again. You may need to restart a few times in some cases.

  j. the icon cache has been rebuilt.