Back to Vista

Similar Questions

• How to recover the Satellite L to get back on Vista?

  Hiya,

  My son has recovered a part a little Trojan, it only would not let us go in safe mode or restore. The only thing we could do was to completely clear all & use the disks to reinstall again. Simple normally... but this time it wont run something else that XP now, I tried 5 times to reinstall from backup disks to return to Vista and it freezes just the farthest, I managed to get was the installation of updates, but it froze once again to 25% on the portion of the Net framework update.

  His market on XP at full speed now, but if I try to put Vista slot via the backup of disks it takes about 5 minutes so he can perform an action, slow is not the word.

  I want to just go back to Vista and now completely lost, why used it keep running Vista?

  Anyone any idea?

  Hello

  If I understand your question; you have installed Win XP on the laptop, but you want to install Vista, but Vista freezes and is slow is it good?

  What cell phone do you have?
  As far as I know the books supports the new SATA controller.
  This means that you need the SATA driver to install the Windows operating system.

  You can change the compatible SATA mode in the BIOS. This will allow you to install the Vista and other operating systems Windows without the SATA drivers, BUT this will slow down the performance of the HARD disk!
  This is perhaps the reason for your question

• Re: Can't disable touchpad using Win 7 and do not want to go back to Vista

  Hey,.

  I'll have the touchpad jumpy condition where I'd like to just turn off my touchpad because I use my mouse anyway, but since I installed a version of the legitimacy of Windows 7 to get rid of Vista I am unable to do anything with my mouspad.

  Fn + F9 key does not work and I can not get the touchpad settings.

  I know I can fix it by going back to vista, but it will not happen, if anyone knows any solutions?

  Post edited by: Chepri

  Hello

  First of all, it would be interesting to know what laptop you have.
  Second, you must install the driver for the touchpad for gt touchpad work.

  In addition the Support Toshiba utility map Flash must be installed to get the FN keys to work.
  Flash card utility is portable independent tool and you can use a spell to Satellite L500

  I did it on my A200 and it worked...

  Welcome them

• Can satellite L300-29V - I roll back to Vista after installing XP?

  Simple question: assuming I made the recovery discs, is it possible to erase Vista, install XP and then re install Vista using recovery disks? The laptop is a Satellite L300-29V.

  A big thank you in advance I can see no clear answer elsewhere.
  John.

  Hello

  If you created the recovery disc, you can do what you want. Why? Very simple: the recovery disk contains an image of the factory settings. This means that the version of Vista pre-installed with all the drivers and tools. It is him you even have started the laptop, the first time.

  You can install XP, Linux or whatever you want. Demarrer start from the recovery disk, follow the instructions on the screen and you go back to Vista.

  I hope this information is useful for you.

  Welcome them

• HP Pavilion dv3510nr installed windos 8, can't get back to vista

  I installed windows 8 and now want to go back to vista. No disck recovery and no disk Vista came with my computer. I press F11 without interruption at the beginning and windows 8 comes anyway. How to get back?

  Hello

  Please try this:

  http://www.computersurgeons.com/SearchProducts.aspx?SBT=dv3510nr&BKM=results#results

  Kind regards.

• After you install Windows 7, go back to Vista and asks for a password but do not remember placement

  Title says it all really, I tried to recover my address book (outlook express). Fails to recover backup data, that is stored on an external drive?

  A bit of a mess.

  * original title - installed win 7 when I return to vista is now applying a password. don't remember a setting. Help *.

  Hello

  1. How did you go back the vista? You are using a dual-boot configuration?
  2. what exactly happens when you try to access the address book? You get the error message?
  3. what exactly happens when you try to recover data from backup? Error message?
  4. what happens when you press on enter without having to type a password when prompted? Error message?

  Answer these questions and tell us more about the issue. This could help us help you better.

  How to ask a question
  http://support.Microsoft.com/kb/555375

• Upgraded to Windows 7 and then downgraded back to Vista - ethernet not working, pilots it but says error Ethernet does not, code 10

  My computer is a Vista desktop Dell Vostra.  I've upgraded to Windows 7 and did not like (a lot of my programs wouldn't run well on it) so I tried to demote him back to Vista.  Now my ethernet does not work.  The drivers are there, but he says won't work, code 10.  How can I fix it?  I can't solve the problems on the computer, because I have no network.

  Hello

  go to dell and get the latest drivers for vista for your machine using one, you're on to get here

  Save the drivers for the flash player and then transfer them

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

• want to DUMP windows 7 and go back to Vista

  want to DUMP windows 7 and go back to Vista

  want to DUMP windows 7 and go back to Vista

  Hey old77mountainman

  Contact your computer manufacturer and ask them to send a set of vista recovery disc

  they do it for a nominal cost

  also ask them if you have a recovery partition on your hard disk to reinstall vista back to factory standards

  you normally start the recovery at startup process by pressing F10 or F11 etc.

  Ask them of the correct key sequence

  and see if the information on the link below applies to you on the windows.old folder

  This article describes how to manually restore a previous Windows installation on the computer to replace the current installation of Windows 7.

  To do this, you must use the command prompt, and you must type specific commands at the prompt to rename and move folders between the different versions of Windows.

  http://support.Microsoft.com/kb/971760/

  Walter, the time zone traveller

• Vista on computer and someone put it on Windows 7, now can't come back on Vista

  I had windows vista on my computer and I had someone put on windows 7, now I can't go back to windows vista. can you please help me and tell me how to get back on windows vista because windows 7 will need a restored drive now and I don't want to pay $100,00 so he can work in that it has expired. What should I do to get back to vista and how can I get a restored vista disk? can it be sent to me and how much does it cost?

  * original title - need help *.

  See: How to replace the lack of software Microsoft Carey Frisch

• Back to Vista to Windows 7

  I have this computer that had vista on it.  I've upgraded to Windows 7 and have had problems.  So I was wondering if there is a way to get back to Vista.  I don't have the drive to do so because it was preinstalled on the computer.  You some way simply to get rid of 7?

  Hello

  Under certain conditions, this can work. See: http://support.microsoft.com/kb/971760/en-us

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Back to Vista after not authentic Windows 7 was installed

  a friend installed a copy of windows 7 ultimate in gift, now is to show that counterfeiting;

  I want to go back to vista, but it was removed from my laptop,

  How can I download a copy of vista and use my original key to activate it, preferably without any cost more

  Really, the only option is to contact the manufacturer of the computer and get a set of recovery disc for a small fee (no cost) to restore your system back to factory conditions.  It would be a pure install so be sure that you have backed up your important data (programs, settings and updates will have to be re-installed).  Another option is to find someone with an Installation disc full Vista genuine in the same size of the bit and use it to do the installation with your original key (assuming that the key was for a full installation - if it was an upgrade, you must install and activate the original operating system first and then perform the upgrade - you can not use a key to upgrade to a full installation).

  There is no download legal, free Vista product from anywhere.

  Here is Microsoft's policy on replacement software: http://support.microsoft.com/kb/326246/en-us.  As you can see, it won't be a big help in this situation if you want to avoid or at least minimize costs.

  I'm sorry, we can not help you more, but these are your options.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Back to Vista Basic Vista Home Premium Edition.

  My son accidentally downloaded the upgrade to Vista Home Premium on our computer that originally had Vista Basic. Now the computer won't let other windows functions work and started the system asks the Home Premium product key. I want to just go back to Vista Basic and remove the Vista Home Premium. How can I do this without being able to use all the other features of windows (start is not yet on the screen)?

  You will need to do a reinstall of Vista Basic.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Factory reset, it will find windows 7 upgade or roll back to Vista?

  Hello, I want to install an SSD and need to do a factory reset first. When I bought this Vaio had Vista on it, and later I paid Sony for the upgrade of Windows 7 which is a download.

  If I go through the factory reset on the recovery partition it back to Vista or Windows 7 will keep?

  Thanks for any help

  Paul

  Paul

  IF it had Vista on it, then you guessed it the restore partition would be for this OS, unless you changed it so it would restore a vanilla Vista OS

• I have windows 7 business, how to get back my vista?

  I have windows 7 business, how to get back my vista?

  Reformat the computer and reinstall Vista.

• How to roll back to vista after an upgrade to windows 7?

  How to roll back to vista after an upgrade to windows 7?

  New computers that come pre-installed with Windows 7 or Windows Vista often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  ------------------------------------

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  or

  Windows Vista download and reinstall

  Files Windows Vista Setup official (Digital River)

  Note these .iso files can be used with a Dell/no - product Dell OEM keys but the phone activation is required (see the note at the end). This key is usually located on the COA attached to the base of the system.

  Sale to the retail/upgrade product keys that can be used with these .iso files and activated by internet or by phone. See the note at the end for the activation of the phone.

  Windows Vista (in English) with Service Pack 1

  Windows Vista (x 86)		Windows Vista (x 64)
  X 14 - 63452.exe	X 14 - 63453.exe
  Boot.wim	Boot.wim
  install.wim	install.wim

  Installation instructions (creation of bootable DVD/USB)

  You must download the .exe, the boot.wim and install.wim file in the same place. Run the .exe file and it will extract all the files in a folder called Vista. Start Windows install will be now (cancel Setup).

  

  To create a .iso bootable extracted the files in the folder of Vista and download Imgburn. Run imgburn and select 'Create Image file from files/folders'

  

  Select the record button browse and select the folder of Vista. Then select Advanced.

  

  Left will be your folder of Vista, to the right, make sure that you have verified make Bootable Image, changed the developer ID: Microsoft Corporation, load segment: 07C 0 and loading areas: 4.

  

  Select the folder browse button then navigate to your folder of Vista, then select the startup folder and select the file called etfsboot.

  

  Select the generate button.

  

  Save your .iso

  

  Select Yes when the prompt for the Volume name, and select ok. Finally, wait for it to make the .iso file.

  Once we have the .iso file, they may want to use the Microsoft .iso to USB/DVD tool to create a DVD or bootable USB (requires a blank DVD or USB flash to at least 4 GB key).

  

  Note: You can use the HP format tool to format your USB (run as administrator) after the windows install so you can use it as a USB again. ;)