Backflip stuck on reboot screen

Similar Questions

• ASUS laptop computer stuck on reboot screen after system restore

  Hello

  I did a system restore on my laptop and asked that it be returned to the State where he was 3-5 days ago.

  It was all going well until he came to turn it back on - it is now stuck on the screen to restart for almost 2 hours!

  I don't want to cut to the case that it damages, but I don't know how to get out of the reboot screen.

  Any help/advice would be much appreciated :)

  Hello

  This problem could occur if the system restore was not completed successfully.

  If the computer is blocked at the start screen, I suggest you to restart the computer and see if you can start the computer normally.

  If this isn't the case, I suggest you to perform auto repair from WinRE. Check if it helps.

  To run auto repair on follow computer Windows 8 as follows:

  (a) to Insert the media (USB or DVD) and restart the computer.

  (b) key press F12 (usually it's F12, but it may differ between computer manufacturers) and choose the drive that you inserted the installation media in.

  (c) once the Windows Setup window appears, follow these steps:

  (d) click Next , and then select fix your computer.

  (e) you will see a blue screen and a option to choose.

  (f) select the Troubleshooting option and select Advanced options.

  (g) you can choose automatic repair in Advanced startup . option

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Laptop HP Stream - 11-d020nr: laptop HP Stream stuck on reboot screen

  Hello! So I recently had my laptop, about 2 weeks and it worked fine so far. The Google Chrome browser has been unresponsive (I guess because I opened it an update trying to be installed) so I decided to restart the computer (after the update was not, of course, not during) he asked if I wanted to cancel the reboot or strength; I chose to force the reboot. Now, I've been sittung here for an hour and a half waiting for him! Ive even tried to force a manual shutdown by holding the power button, but again that used to do anything! (I held for 20 sec)
  I don't know what to do because it's always on blue reboot screen. Help, please.

  Hey guys!
  So I guess you all have the mobile workflow specifically.
  What happened, it was the CPU is 100% frozen and unfortunately you cannot fix it yourself unless you have equipment and well know computers.
  So the only solution is to take your laptop in a store without doubt that you bought the laptop that they should have a tech help station; I took mine back to the store I got it from (aka micro Center) and a computer scientist, he fixed for me.
  So the problem is not major and your files should be secured. Mine were fine and nothing was wasted.
  Hope that helped and sorry it happened to you all too. It totally sucks but at least its fixable

• BlackBerry Smartphones from blackBerry 9700 reboot screen stuck and deformed

  I rebooted my blackberry 9700, but it is stuck on restart screen where it says blackberry with unfinished start line and a distorted screen

  Hey scramba,

  Welcome to the community of BlackBerry Support Forums.

  Have you tried to remove the battery? If so, I would say to do a reload own the software of the device as shown here: http://btsc.webapps.blackberry.com/btsc/KB11320, please test before you restore all data on the device.

  I hope this helps!

• iPad2 9.3 upgrade stuck at the screen of the unavailable activation server

  I tried an ota on my iPad update 2 and it is stuck on the screen of activation with an error message - activation server is temporarily unavailable. tried rebooting, connect to iTunes - nothing works... Any help on this would be welcome.

  BTW... my iPhone6 and mini ipad updated very well...

• B1 - 710 stuck on the screen 'formatting data"after trying to do a factory reset.

  After occassionly gel to start the past two weeks, causing necessary reboots, the tablet in a loop start.  The last time this happened, about a year, a factory reset solved the problem. This time, however, the Tablet is stuck on the screen layout of the data. Now, even holding the volume up button and the power button on the system goes back to the screen set data formatting and nothing else happens.

  Is it possible to retrieve the tablet or is - this one probably a hardware problem?

  It seems a hardware problem, to be honest, but may also be a corruption of OS/recovery if you are still under warranty, support Acer a call.

• computer is stuck in the screen that lets you choose Safe mode or start normally

  Original title: stuck

  My computer is stuck in the screen that lets you choose Safe mode or start normally. When I choose that it just goes back to the same screen. stuck in this screen

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• Windows 7 Enterprise - screen is stuck on the screen 'your computer is locked.

  Hello

  I have a computer for no reason while not using it decides to lock and stuck on the screen "computer lock you."

  I already have several times, power options changes since I work in a corporate environment all the machines are defined with the same question. All the computer we have, this is the 1st time that this issue has already shown. Do not know what could be causing the computer to be lock up on this screen.

  The computer in question are pushed constantly updated and have all the updates of the system. It is a desktop Lenovo M93p 8 GB if ram and a 256 GB SSD running off a Core i7. A reboot clears the problem for a while, but do not recur.

  Event logs see the errors for Schannel, application of group policy management and a problem of Netlogon. Not sure if they are related to the issue.

  Any help will be appreciated

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• BlackBerry Z10 stuck on blue screen

  My Z10 won't restart. It gets stuck on blue screen after trying to remove the battery. Have also tried long-pressing the power button with volume keys simultaneously.

  I had to use the BlackBerry link to reload the software. That reset the handset to factory default - I then did a software upgrade. Phone seems to work fine except it will reboot now and again... I give up!

• Smartphones from blackBerry Torch 9800 stuck on reboot

  I recently downloaded the new BBM application, and the icon disappeared from my phone.  I tried to reboot several times and it finally appeared, but he has not been called BBM, rather something net_rim_.  When I clicked it, it says "files missing resources" and would not load.

  I also noticed that my BBM connected apps (Facebook, etc) were not load correctly.

  So - I saved my BBM contacts and deleted and reinstalled, but there is no icon again.

  I checked this forum and found a similar problem, and the solution was to check if the necessary software update, which could solve the problem.

  I checked on my torch, and he said that there is an update available, so I downloaded it.  It downloaded fine and then asked if I wanted to install it and gave a warning that it might take 2 hours or more.  That's fine with me, because I was going to bed early and would not use it.

  Before going to bed, I noticed that it has been reset.  I thought I just leave and go to bed.

  When I got up this morning, I noticed that it was always restart.  The white bar would completely go through then it would go to a white, shared screen black and then start again.

  I checked the forums once again and found a similar problem, which says to pull the battery and replace it.  Did, and it did not work.  I tried several times and even let the battery for 2 hours, in the vain hope that it might work.

  I tried connecting to BlackBerry Desktop to do a restore, but it cannot connect to the phone, because it is stuck at reboot.

  Any suggestions?

  Found the solution on another post. Do you have what he said, and the phone works again. Unfortunately, when I restored the backup it uninstalled most of my applications. Had to update AppWorld and am now slowly reinstall others.

• Smartphones blackBerry torch freezes on reboot screen

  Hi, I got my flashlight since early January, and there is no water or physical damage to him. Everything was spectacular work until today.

  This morning I changed the security settings for the AT & T Live TV app and the Pandora app. He then asked a reboot that I authorized. The phone turns off, back to the screen to reboot (with the logo of BB and the "BlackBerry") as well as the bar loading restart on the bottom.

  The thing is, the bar completely and that's all, it remains frozen. Nothing else loads. I took the battery and retried. Several times. Now, I am just let it sit there, load fully charged bar, having done nothing but be frozen for about an hour now.

  Can someone help me with this you problem? Thanks for your time.

  Hi LFLimon,

  I have the same problem since I changed the settings for these two applications and a few others deleted last week. You can find the thread I posted Sunday here: http://supportforums.blackberry.com/t5/BlackBerry-Torch/Torch-9800-stuck-on-loading-screen-PLEASE-HE...

  I don't have the chance to try the suggestions of Pegotico again since my Torch is at home and I was out of town. In any case, I hope it will solve this problem, let us know how it works for you.

  See you soon

• Laptop Asus X205T stuck on reboot

  Hello, I just got this laptop about six days ago, and it happened. I turned off my laptop as usual last night and I turned it on this morning and it is stuck on the screen to restart windows for maybe seven hours now. I don't do anything on my laptop outside the Internet use and I did not purposely restart the laptop, I just turned it on and it is since then on reboot.  A little help please?

  None of those who went to work because I don't have a CD player and I couldn't do ANYTHING about it because he was actually frozen. I ended up not Plug and let it die, then I plugged it in and turned on and boom, just like that, it was back to normal. I guess that something with how I tried to stop it was messed up, but now it's back to normal.

• Windows 8 stuck on reboot

  I bought an Asus laptop only 3 weeks ago. Tried to open the pdf with Adobe reader. Computer froze. Tried to restart and now its stuck on the blue screen restart. Tried to turn it off and then giving him the power. No change, just a reboot screen. Have you tried the "windows + Q", "" windows + R ", etc.." Nothing. Any ideas?

  My new laptop is now a $ 500 paper weight. I was starting to like windows 8 and now I am very sorry that I don't have to buy a Mac.

  Hi Quenton,

  Welcome to the Microsoft Community and thanks for posting the question. I see that you are unable to access the desktop screen. Let me help you with the issue.

  1. what security software isinstalled?

  I suggest you to refer to this article to check if this help.

  Windows hangs or freezes: http://support.microsoft.com/kb/2681286

  I hope the step preceding helps. If you need further assistance on this particular issue or any other related issue Windows let us know and we will be happy to help you.

  Thank you.

• Stuck at the screen 'failure of Windows update Setup.

  I have reset my laptop Windows 8 and downloaded the updates required for Windows 8.1. Then I had to reboot my computer and configure updates. Now it is stuck at the screen 'failure of Windows update Setup. He has already restarted once and is back on the same screen. It is an Asus laptop and from what Ive read, this is not exclusive to all laptops Asus. I do not have any disk installation or any way to activate Safe Mode as I have tried (in fact something that requires search or any key entry does not work). I hope you guys can find a soultion, thank you

  EDIT: I think that now it's in a forever continuous reboot, preparation configure updates, failed comfiguring cycle of windows updates.

  Hello

  What is the full error message? An error code is displayed with her?

  Why did you reset the computer? You had problems?

  This problem could be caused due to some incorrect settings or due to a compatibility issue. I suggest you try these steps in the following article and check if the problem persists.

  http://support.Microsoft.com/kb/949358/en-us

  Keep us updated on the results.

• Windows 2012 stuck on reboot

  We run vSphere 5.5 U2, and we have a few Windows 2012 SMV and some 2012 R2 virtual machines.

  
  It seems that when a reboot is initiated from an RDP session on virtual machines 2012 (not R2), they usually get stuck when rebooting on Windows screen with a circle of rotation. The only way to solve it is to reset the virtual machine.

  In my tests, this happens if you try to restart the console (VM > power > comments to restart).

  Has never seen this, or know a way to solve?

  I saw this happen not only with Windows 2012, but also with Windows 2003. The reason - at least how I understand it - is related to the fact that the closure of the RDP session (not a console session) gets, the shutdown process could be killed, which leads to a situation that is not defined. What I usually do to avoid such a problem is to use shutdown-i who starts a process that is not running in the RDP session, but on the host directly.

  André