background buffer configuration

Similar Questions

• increase buffer size

  Hi all

  I am currently taking 6 pressure measurements, convert and then send HAVE up to 6 current AO, so I'll have continuous samples for each channel. I got error 200609, which wants to increase the size of buffer when buffer selected size: 1 and Minimum required Buffer Size: 2.

  I tried to correct this error by adding the output buffer configures and adding the constant 2, then it gives me error 200524, saying:

  Scripture cannot be performed because the number of data channels does not match number of channels in the task.

  When writing, provide data for all channels in the task. You can also change the task so that it contains the same number of channels as the written data.

  Number of channels of task: 1
  Number of data channels : 2

  I was stuck for a few days, now try what is recommended in the forums... what should I do to get this program to work? Fastener is the program. I just started to work with Labview a few weeks, so I'm a beginner.

  Any help is greatly appreciated!

  Try to remove the sample VI on the task of output clock and write NChan 1Sample inside your loop to update outputs.

• Photosmart 5524: Sweep ends only when go HP printer Asst. ; used to scan automatically

  Just for the last 2 weeks or so, when I go to scan a document to my computer with a Wi - Fi, the message ' computer does not, check network connection is displayed. I have virtue to solve the problem and the analysis, after going to the Printer Wizard, manage the scan of the computer, and then disable and then allowing once again the analysis to the action of the computer. Why is this and I go back to auto scan the prinetr again? Is this something to do with the recent Microsoft updates?

  Hey @Palmyra3,

  Welcome to the Forums of HP Support!
  
  I understand that you are not able to use systematically the "computer scan" function on your HP Photosmart 5524 e-all-in-one printer to your computer Windows 8.1. I would like to help you today with this problem of communication of intermittent scanning. Now, because you are able to go in and manually enable the option 'analysis of the computer' and it works fine (temporarily) we know that your software and drivers are correctly installed and that you have no such conflict of wireless communication. I think a background on your computer or a firewall program can cause the conflict of communication bidirectional scan.

  To solve this problem today can I please have you click here. When the page opens you will be taken to the paper Support HP for a computer"not found" or an error message "Connection error" message.

  The steps that I want you to pass by are going to be a little out of order that the document States. Please run through:

  Solution 5: Search for critical updates, hotfixes, and firmware:

  The only available for your printer update is update the firmware of the printer HP Photosmart 5520. If you click on the link provided you can upgrade the firmware for your printer and test again the front scan function.

  Solution 6: uninstall the software, run Disk Cleanup, turn off background programs, configure the firewall and then reinstall the software:
  

  Please start by step 4: turn off programs running in the background and again test the scan function. If everything works fine now that a program running on your computer background is at the origin of the conflict. You can leave your disabled if you want as the background programs. Programs on your computer will work fine, they just used automatically running in the background of your computer.

  If the problem persists, please browse: second step: delete unnecessary files and folders with disk cleanup, step 3: restart the computer, and fifth stage: Configure the firewall under Solution 6

  If the issue still persists, as the race through Solution 2: download a tool to fix the problem automatically

  Please let me know if the steps I have provided resolve your problem of communication of scan. Good luck!

• Difficult to use the outputs analog to generate a predetermined file

  Hey all,.

  I tried to produce a file predetermined to a 1 kHz on my USB 6343 Multifunction DAQ analog output channel.

  Here are the questions I have am experiencing:

  1: output file so fast my o'scope cannot even pick it up.

  2: when you try to stop the output it almost freezes.

  3: my graphical waveform data and the plot does not update with the data that have been read.

  If someone wants to tackle one or more of these questions, I would be very appreciatve.

  Thank you

  Kassandra

  kashi13 wrote:

  I tried to adjust the "DAQmx Configure Ouput buffer" but it really doesn't seem to have much effect. Do you think I should try a loop For to pick an amount predetermined points then output them quickly?

  It's weird.  So I don't generally need to use the function of output buffer configuration you have.  If you look at using the Subvi DAQmx Timing just after it, you will see the samples per channel will help determine the size of the buffer.  You might want to try do not use the function of buffer output set at all, not that I don't know if that will fix it or not.

• HP Jet 7: My hp stream 7 tab stucks in the configuration of the window has... (a picture of blue background with whi

  My hp stream 7 tab stucks in the configuration of the window has... (a picture of a blue background with white letters) its does not accept the entry while I also use an aotg with the mouse cable. So please help me its very urgent

  Try to hold the low volume button when the power and press the F11 key to enter the menu of system recovery.

• TMSXE and TMS 'configuration buffer by default'

  TMS: 14.3.1

  TMSXE: 3.1.2

  Although we have setup in the TMS, the "default buffer' to 10 mintes, we are not able to start meetings in advance. Looking at the documentation it says:

  "ATTENTION: do not enable installation and destruction of the buffers if you are using the smart Scheduler, Cisco TMSXE or any other application that uses the Cisco TelePresence Suite Extension reservation management API, as the API does not support these pads."

  So if this is true, how can we configure the TMS/TMSXE to allow meetings begin in advance?

  Hi Matthew,

  You can not currently configured TMS to launch conferences in advance if you are planning a TMSXE/Exchange.

  This will change in a future release however, see TMS 14.3.2 Release Notes page 48.

  Kind regards

  Kjetil

• AE CC 2014: how to set up with light background and text dark? [was: Configuring appearance]

  In the latest version of AE 2014 and update, I can't have colors of installation to give me a light background and dark text.  He pegs with AE in a dark background and light text in color.  This very hard on my eyes. It was a very bad idea to take the configuration which has served so well for a long time.  Someone decide that a dark background theme was more 'cool' or some other nonsense.

  They're going to fix this, or should I just continue to use the previous version?

  Adobe said there is an ongoing update to remedy this situation.  They did not say precisely when, but many people say, it can't come soon enough.

• How can I add change the color of background/first plan the Configurator?

  How can I add change the color of background/first plan the Configurator?

  No matter if you mean the Configurator application or a panel created with Configurator, you would probably have to post the question on the Configurator Forum.

  Configurator

• How can I configure FF to always open links in a tab in the background? (as if the left ctrl click is always on)

  I used to have FF for this, but since the upgrade to a new laptop, I can't understand * how * I've implemented for open all links as background tabs. I have installed TabMix and obv. I can ctrl-click, but I want it to be the default setting.

  In tools-> Options - tabs, there is a check box for "when I open a new tab, switch to it immediately." Clear this check box, and then restart your browser.

• IMAQ configure buffer - delay in the implementation of large number of buffers

  Hi all

  I don't know which forum I should post this in, but I hope that someone who can help me see this. I'm having a problem with a program that I wrote to acquire and store images from a camera to linear scan.

  My camera (SUI Goodrich, 1024 pixels) is connected to a card framegrabber (PCIe-1427), which is connected via a RTSI cable to a PCI-6731 card attached to a SCC-68 (series) connector M.  My goal is to drive a mirror galvanometer scanning and acquire images from the camera continuously on each scan. As the galvo scan will be the frame of an image (1024 pixels x 1024 lines).

  I managed to do it (I think), as my direct purchase program works exactly as I expected. However, when I try to save the images, I noticed that for a larger number of images, the starting point of the image is shifted the same amount for each image. I'm not really sure what's going on, it seems to me that there is a delay in the use of the VI "IMAQ set up buffer" when a large number of buffers is used.

  I would really appreciate any idea or ideas that anyone could have on this issue.

  Sincere greetings,

  Gill

  I fixed the problem by doing that I don't use actually 1000 stamps to save 1000 frames. Program works if the number of buffers is lowered.

• How can I configure a gif animated as my background?

  I use windows 7 and I can't ever have a fixed image, I checked, the file is a gif file. can we have background on win7?

  Hi Travis95,

  Please note the Active Desktop, which has helped to put animated gif (Graphics Interchange Format) files as background wallpaper more disadvantages wherever there was withdrawn in Vista and Windows 7.

  As it is a design problem, there is nothing we can do from our end.

  If you want to suggest changes in the design here is the link you can make reference to: Microsoft Connect - back products and bug reports. Microsoft...

  https://connect.Microsoft.com/dashboard/Info/

  For more information you can visit this link below.

  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/ff4ad945-4a41-4797-919b-59a9992b23fe

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I configure my background color to fill more than just the .gridContainer

  I'm a little new to the fluid network, but I use to be able to set my background to the whole of the site through the page properties, and now it seems only to fill the .gridContainer.

  Any thoughts would be very welcome.

  Thank you

  Mark

  If you have set the body to be of the same width as the .gridcontainer?

  In this case, use the HTML element rather than the BODY element as in

  HTML {}

  Background: orange;

  }

• HELP: Web site configuration of fireworks background scrolling for the export of Dreamweaver

  

  That's what I designed for my site so far (attached image) the light green rectangle is the box I would like to thank for the user to scroll down for more information while on the Web site. How can I set up this picture/feature for dreamweaver CS4 html compatible.
  Can I use the scale to 9 of cuts or export a small horizontal image that repeats in the background or what.
  ????

  Please help me.

  Thank you.

  • If you want a box, then you want a div, which means CSS. Any div (or an HTML page by the way) will automatically increase to contain the content it holds. See the tutorial I linked to before.
  • Transparent background also means CSS. Transparency is handled differently by each browser, and can be a bit tricky. See http://www.google.com/search?hl=en&source=hp&q=css+transparent+backgrounds&aq=f&aqi=&aql=& oq = & gs_rfai =
  • If your text is longer than will fit in a browser window, you will get a scroll bar on the browser. If you want an integrated area - potentially with a scroll bar - to put your content, then you want an iframe. See http://www.google.com/search?hl=en&safe=off&q=iframe+html&aq=f&aqi=&aql=&oq=&gs_rfai=

  In all cases, you write the code in Dreamweaver (or another creation tool or a text editor). It is not done in Fireworks. Fireworks is not a HTML authoring environment element.

• On a windows 2000 Server computer how to configure Group Policy to prevent my students to always change the desktop background and screen saver? __I want to set a screen saver and corporate logo.

  The server is a standard computer on Windows 2000 server and the workstations are XP.  We will be upgrading our servers next year, but for now I have to use what I have.  I do not know true with Windows 2000 Server Edition.

  You have posted in a forum for issues of office and customization for the Windows XP operating system. Your question has to do with Windows Server and group policy. Here's a great site to help you with your server issues:

  http://www.Petri.co.il

  Questions on group policy can be asked in the TechNet forums or in the Group Policy newsgroup:

  In a News Reader: microsoft.public.windows.group_policy
  On the web: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg= microsoft.public.windows.group_policy

  http://social.technet.Microsoft.com/forums/en/categories/ MS - MVP - Elephant Boy computers - don't panic!

• I can hear the tv works in the background and I don't know how to stop it? I don't have the computer configured to run the TV!

  I can't stop it because I have not all programs that are running.

  Hello

  Check your home page to make sure that a 2nd entry has not been added. IE - Tools - Internet Options-
  General tab - homepage

  Also:

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  ===============================

  And more troubleshooting:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.

  -------------------------------------------------

  If necessary to solve the problems:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.