Background color showing above the graphic layer?

Similar Questions

• Change the background color based on the value

  I'm sure that this is a trivial question, but I can't seem to find the method to do it.

  I want to change the background color of an indicator according to its value.

  For example: if I have a set of say 123degF, I would like to the color of background color green if the value is either 1% or +/-2degF.

  Otherwise the color could be if above red and blue if under.

  I was able to schedule a psychic acomplishes, but with more than 50 indicators the interface gets quite busy.

  Santosh is correct. Here is a small example of the implementation of this code:

  

  I've also attached a copy of this VI, with the connected devices, so you can use it as a subvi if you wish.

  He takes input of temperature limit lower and upper limit. It then returns the value of the temperature, with the color of the indicator of change.

• How to change the background color dynamically on the page of the ofa

  How to change the background color dynamically on the page of the ofa

  Hello

  Can you please let me know the dynamic conditions to change the background color?

  Thank you

  Vincent

• The color selector is to select the background color instead of the foreground color.

  You know how when you are painting, you can hold ALT and it will choose a color of the cloth? Well, for some reason, mine still picks up the color, but it assigns background color instead of the foreground color. And when I actually select the eyedropper color tool, it will only select the background color but when I hold the Alt key, you select the foreground color. Basically, he is knocked down to where it is supposed to select. Do you know how it folding? He drives me crazy. Thank you.

  In the Color Palette (window > color) click on the foreground swatch. A "ring" will appear around it.

• background color disappears into the document

  Background color disappears in the document viewer, but can be seen in the browser. No image present plot. Why is this? It must, because the background color file is in a different folder and impossible to find. Is there something in the settings? How to see the color information in the document?

  Thank you!!!

• How in the paint can have the background color assumes that the background color of whatever the image is stuck on

  I have a photo I am amending in paint and erased what I don't want image.  Unfortunately, now when I import the image into PowerPoint, the cleared area of the image is the color I used in painting.  How can I get the color of the image in the painting to use whatever the color of the background is where the photo is stuck?  For example, if the background in PowerPoint is light blue area which I deleted in the painting seems to light blue.

  Hi GaryDry

  By default, the gum replaces any area you erase by white, but you can change the color of the eraser. For example, if you set the yellow background color, everything you clear turn yellow.

  a. on the home tab, in the Tools group, click the Eraser tool.

  b. in the colors group, click color 2and then click the color you want to erase with. If you want to erase with white, you don't have to select a color.

  c. drag the pointer over the area you want to erase.

  Refer to the below links for more information.
  http://Windows.Microsoft.com/en-us/Windows7/using-paint
  http://Windows.Microsoft.com/en-us/Windows7/getting-started-with-paint

  I hope this helps.

• Background color of sequence, the value without using a video track

  Hi, I can set the background color of a sequence, without using a video track of a white image file or as... I guess this should always made when I saw. Also the idea of the project is a white bgd and evrything with an alpha channel must key in front of a white background... the same account for all texts... + I don't want to lose the highest video track in the vertical center of the timeline for 1 substantive item unique.

  Seems to be a very standard task that needs to be used very often, if people use the first for multi media movies.

  Heaven can't given an option of background color in the sequence settings, project settings or Edit/Preferences... F1 or google pulls a lot on the inlay or layering, but when it comes to the simple question to set the background color of the sequence without using a video track for her... found nothing.

  Does anyone know if and how it works?

  Kind regards

  Frank

  The BG of each track in the sequence is ALPHA. That is to say. There is no color.

  You neeed to use a matte color for what you want to do.

• New layer above the current layer?

  Is it possible to make a new form/Null/text layer above the layer selected in a model? Newly created items are always created in layer 1, on top of all the layers in the timeline panel.

  one way to do it:

  don't forget your active layer in the model number, create your new solid cmd + x, enter the number that you have kept in mind and paste (cmd + v)...

  But I agree, a preference for this parameter would be welcome.

• Transparent background becomes white during the 3d layer switch off

  Hello

  I have a project with 2 layers on her file. A background layer and a layer with a text on this subject. Whenever I have activate the 3d on the text layer view, the background goes from transparent to white.

  You can see for yourself here, it's my source file:

  http://DL.dropbox.com/u/4241134/transparentbackgroundproblem.AEP

  In the layer named "TextHere", activate the layer "3d" option and you will see the background disappear.

  It's the most boring, I scoured the web for an answer and keep coming to court.

  Any help would be GREATLY appreciated.

  Best,

  Ed

  You use the camera 'Before' by mistake. Switch 'Before' in 'Active camera' in the Model Viewer and you'll be good to go.

  

• Integrated above the graphics card dedicated graphics card, I think?

  OK, just to put my problems in perspective, I have a laptop-> Hp pavilion dv6 (on the laptop). It is 2 months old, has a processor intel i5 2.30 GHz processor (Duo of course). I have a graphics card integrated on the motherboard according to the usual and a dedicated Radeon 6490 M. in the past, I've never used Nvidia so I'm not at all familiar with the material.

  The problem I have is when I go to play a steam game (for example today, counter strike source (CS source)) said that the graphics card I use is not known for their serves. Then I'm fine, if that's the case, the computer must choose using built-in dedicated memory (the best clear). Now for the players no, engine cs source is not really powerful compared to our days the games.

  My logic is that a graphics card as up-to-date as mine and the fees I paid for the laptop, I should have dedicated memory and computing power necessary to run the game to its full potential. Its really frustrating, I suggest that person never buy HP again. I already have so many problems. Maybe it's not right to blame the company material, but most of the problems were hardware problems (a part of the single Pass system - TERRIBLE!). I'd appreciate any help, ANY HELP reallly! Thank you

  Hello

  Your PC think that Steam does not need a lot of graphics computing power. So, it's not getting 6490 m and thus, Steam only detects the integrated graphics card. What you want to do is spend on 6490M before launching Steam.

  Read this http://support.hp.com/us-en/document/c02731962#N347

  It solves your problem, I hope

• Illustrator color shows in the black color picker if is not

  Illustrator 2015.3.1

  Windows 7

  I downloaded a bar chart and when I click on the color to change it, I see that it is recorded as black, even if it is not

  

  If I change the color later, it is not registered

  

  no idea why this happen? Gives me problems when switching to EI and convert to shapes (layers just like grey, unless I have manually)

  Here is an example:

  https://docs.Google.com/UC?ID=0B5wyUt17-tu2M3NZNG5rYkd0NGM & Export = Download

  It is not a sample of color, but it is filled with a gradient.

  Just use your Swatches Panel to change to a color swatch (or the Panel declined to change the gradient).

• Adjust the background color to match the specific shade

  Hello!

  I was instructed to clean a few images from a studio session. Either the background seamless was the wrong color, or was invaded by evil and its color must be adjusted slightly. I have isolated the backdrop as its own layer and simply adjust its color to match a specific shade (RGB, CMYK # s provided). There is a certain gradient due to the installation of lighting, so it will not be uniform everywhere, but it's OK.

  I do not see how to adjust hue, saturation, brightness in the options I tried (adaptation layer, replace color etc), which lead me to the eye there. I need to enter the RGB or CMYK #s and apply to adjust the color of the background (layer) together. Cannot know what I'm missing here.

  Appreciate any help! Thank you!

  When you sample the color you want to match, write these numbers.

  Now, on the background you want to adjust in order to match the colors that you noted, raising some adjustment tool to use, I use the hue and Saturation, for example.

  The color eyedropper sampler allows you to place a sampler on the background area that you need to change the color that you want to match.

  Now, you'll notice there are distributed the values in the range of information if you look at the values of the sampler. In this case #1 (see screenshot)
  The value on the left is the original sample value, the number on the right represents the new value when you move the sliders in the parameters of adjustment layers. Keep these move around until you get the number to reach the numbers you noted at the beginning. Be warned, the numbers on the sliders are not relevant to a certain extent. You make adjustments while watching the Info palette.
  

  See above, I've adjusted the main value and saturation, and you can see the RGB values on the #1 sampler is different. When those numbers coincide with everything what I'm trying to correspond with as a value of the sample, you should be good. Although my value is defined in RGB, I would recommend colors you sample and football game, as HSB values. It is easier, then by a channel with RGB match.

  Good luck!

• Why not a background color shows when I export to PDF?

  So, I used a rectangle, it color and makes full page (my record is 120 x 80 mm). When the colored rectangle is small, it produces very well, but as soon as I'm size full page, it shows in white on the output PDF.

  Help, please!

  AHA - it turns out it was a setting of accessibility in PDF that ignore the background.

  Thanks for your tips - a simple checkbox after all!

• Photoshop CS6 - text showing above the text box

  Hey all,.

  I have a user who is currently using Photoshop CS6 on a Windows 7 Machine and when to manipulate a text box, he sees the text above where the actual text box. I tried to format the text in multiple fonts and sizes with the same result. I also created a new text box on a new layer with the same results.

  Any ideas on that? Is there an option im missing which could solve this problem?

  Thank you

  You can show us a screenshot please?

  What is your problem?

  

  

• How to activate the layer above the current layer with the keyboard shortcut?

  He spent 30 minutes of google and I have not found the solution.

  How can I activate the layer above / below the current active layer?

  Photoshop CC 2014

  European keyboard

  English version of Photoshop

  Windows and Mac

  I tried alt and alt + 0, 9 on Windows, but it doesn't work.

  Thank you

  It's here: Dropbox - move a Layer.atn