Backup code error 0x8000FFFF

Backup has never worked: getting the error code "failure 0x8000FFFF catastrophic."

CHKDSK suggested repair does nothing

Hello alandollwill,

I have included a link below for this specific error.  Please let us know status.

Microsoft KB:

http://support.Microsoft.com/kb/973558

Thank you

Tags: Windows

Similar Questions

  • Error when you try to update Windows 7 64 bit - code error 0x8000FFFF

    Been upgraded Windows 7 very well since the purchase, but in the last few days I've met the above error code. I ran through most of the potential solutions (check the registry keys, checking the services running, disable AV software, rename the folder to download etc.), but nothing seems to help. Currently, I'm stuck with Windows 7 could not update from this point.

    HI -.

    Running "Run the Fix It" in aggressive mode seems to have done the trick. One thing to note - I also disabled Acronis True Image Backup Nonstop, who had run up to this point. If this makes a difference or not, I'm not sure. Whatever it is, the updates seem to work fine now.

    Thank you very much

    It's very interesting as the How to reset the Windows Update components? page specifically mentions that it is not expected for Windows 7 when I visit with my Windows 7 system:

    Advanced System

    This article applies to a different version of Windows than the one you are using. Content of this article is not relevant to you. Visit the Windows 7 Solution Center

    And, applies to , at the bottom of the page, do not include Windows 7.

    I have the feeling that the information on this page is incorrect according to the directives of Windows 7, which is not surprising.
    That said, it seems that Acronis was the culprit that caused the problem to update.

    A Acronis True Image Backup Nonstop running during the previous update was successful?
    MowGreen Services consumer safety update

  • disks of backup creation for a toshiba satellite receive error code error zzimages\zzimages\preinst.swm 020150-20-00000000 will help what I do

    disks of backup creation for a toshiba satellite receive error code error zzimages\zzimages\preinst.swm 020150-20-00000000 will help what I do

    Hi jaygoldstein,

    ·          What program you use to create backup discs?

    If you try to create backup discs using software created by Toshiba, I suggest that you post your question in the forums of Toshiba.

    http://forums.Toshiba.com/

  • Error 0x8000ffff trying code désenregistrez the codec file iac25_32.ax starting from the command prompt (cmd.exe)

    My Windows DVD Maker seems to hang after I click the button 'Next', so I looked in my event viewer for more details. I met that a failed module named 'iac25_32.ax' is the source of my problem. To remove it, I went to my command prompt (cmd.exe) and enter the following text: "regsvr32 /u iac25_32.ax' to try and unregister the codec file.

    Here is where my problem occurs: Once I hit enter, I get an error code reading - 0x8000ffff. Why won't my order process?

    Characteristics of code error : "iac25_32.ax" module was loaded but the call to DllUnregisterServer failed with error 0x8000ffff

    How can I solve this error 0x8000ffff code?

    Note that attempting to unregister a DLL that is not registered currently produces a similar to the following error dialog box, regardless of the version of Visual J ++ was used to create the DLL:

    RegSvr32
    DllUnregisterServer dans...\Project1.dll failed.
    Return code was: 0x8000ffff
    FIX: onCOMRegister not called for the VJ-Generated COM DLL
    http://support.Microsoft.com/kb/223339
    Have you ever tried save this file?
    "iac25_32.ax" is a DVD MPEG-4 filter, as it is not a .dll file or not an .ocx file, perhaps it can be saved or unsaved in all cases, but other seem to suggest so it could be possible?
    Here are a few links of Codec.
    Basically, the K-Lite Mega Codec Pack is going to play all video files on this planet.
    K - Lite Mega Codec Pack
    K - Lite Codec Pack Full (less features)
  • Cannot back up the system - get "critical error (0x8000FFFF) - how do I fix this?

    I have a Gateway laptop with Windows Vista Home Premium - recently I received this error message when you try to make a point to restore/backup: unable to backup system - get "critical error (0x8000FFFF)".

    Any ideas how to fix this?
    Thanks for any help,
    Bob

    Use this tutorial:
    0x8000FFF error code
    http://support.Microsoft.com/kb/946414
    There the "Fix it for me" application and a "I'll fix it myself" instructions.

  • Webloc changed Safari icons: code error-10823

    This morning when I turned on my Mac, I noticed that all my Safari webloc icons turned into another (basically @ sign and HTTP in the icon). When I right click the icon's default implementation "Simulator.app (9.2). By tradition, Simulator.app is part of Xcode. However, I've updated or use Xcode or any application that is part of Xcode in the past 2 weeks (approximately).

    Yes, ok, let's change the default application associated with "webloc" icons for Safari. Right-click. Default app for Safari. I get the error shows: "the element is locked or damaged, or in a folder you have not allowed to edit (code error-10823)."

    After removal of the dialog box, I get another dialog stating: " ""the operation cannot be completed. An unexpected error has occurred (code error-10823). »

    I have restart mode without failure. Same question. I can't find something on the code of error-10823 and on why a land I would get this message that the element is locked or damaged.

    Any ideas? Thank you.

    Mac mini end of 2012

    El Crap 10.11.3

    Although the problem is not the same, please follow the instructions in this article to support to reset the launch Services database. Instead of typing the shell command in the article, I suggest that you copy and paste the web page in the Terminal window. Make sure you only select the entire line. One way to do that is triple - click anywhere in the line.

    If you do not already have a current backup, back up all data before proceeding. You should perhaps log out or restart to see a change.

  • Wireless Service disabled with error 0x8000FFFF: catastrophic failure

    My laptop has developed the following error after deleting files Apple of the system:

    Wireless disabled failed with error 0x8000FFFF: catastrophic failure.

    Network card status: media disconnected.

    HTTP, HTTPS, FTP connectivity: Passive FTP: error 12007 connecting to FTP.Microsoft.com. the server name or address cannot be resolved.

    This copied 5 times then

    Error - could not make an HTTP connection

    could not make an HTTPS connection

    could not make an FTP connection

    I had previously deleted remaining Apple files of the registry, after uninstalling gave me this error message code error "CoreFoundation.dll."

    Hello

    1. when exactly you get this error message?

    I suggest you to follow the steps from the link below and check if it helps.

    Method 1:

    Wi - Fi and in Windows network connection issues:
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2: Try to reset the TCP /IP stack:
    To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
    http://support.Microsoft.com/kb/299357

    Method 3: Try the procedure described in the article below.

    http://support.Microsoft.com/kb/811259

    Method 4: "CoreFoundation.dll was not found" or "Apple Application Support is missing" alert: http://support.apple.com/kb/TS2211

    Hope this information is useful.

  • Hauppauge HD PVR device not recognized / Code error 10

    From the beginning, I bought a Hauppauge HD PVR about four months ago and, to my delight, it worked flawlessly out of the box on my laptop Toshiba in Windows Vista and my laptop Windows 7 Sony. I had saved a good part of my X - Box 360 images when, one day, the device has mysteriously stopped working on my Windows Vista laptop. Whenever I plug it into the laptop Toshiba, it registers as an unknown device or with a wrong code error 10 device. Sometimes, maybe once in ten when moving from one port to another, it will come to the top and works correctly, but if I dared to turn off the computer, turn off the PVR or unplug the USB cable it immediately returns to what is not recognized / 10 state code.

    The laptop is a Toshiba Satellite A305.
    The processor is an Intel Core 2 Duo T5800 2 .00GHz
    There 4.00 GB RAM
    The display adapter is an ATI Mobility Radeon HD 3470
    I am running Windows Vista Service Pack 2, 64-Bit.

    The device in question works perfectly on my other laptop. I tried another USB cable. I uninstalled and reinstalled the USB controllers repeatedly. I tried to uninstall and reinstall the drivers, as well as trying to do multiple versions of the drivers. The device works without error on the Sony laptop, but refuses to work correctly with the Toshiba.

    Any help you could offer would be great.

    Hi ZeroAlex,

    Because you are always faced with the question, I suggest you do an InPlace Upgrade\Repair installation.

    Note Run a repair installation will not damage files and applications that are currently installed on your computer. However, before you perform an Inplace upgrade, you can take a backup of important data. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

    To perform an upgrade in-place, follow these steps.
    a. close all running applications.

    b. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.

    c. in the settings window, click install now.

    Note If Windows does not automatically detect the DVD, follow these steps:

    Click on start and type Drive: \setup.exe in the box to start the search.

    Note The placeholder drive is the drive letter of the computer's DVD.

    List programs, click Setup.exe.

    In the settings window, click install now.

    a. click go online to get the latest updates for installation (recommended).

    b. type the CD key if you are prompted to do so.

    c. in the "Windows Installer" page select the operating system you want to update or Inplace.

    d. click Yes to accept the Microsoft software license agreement.

    e. on the which type of installation you want? of the screen, click upgrade.

    f. when the installation is complete, restart your computer.

    For more information, please see the link:

    How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

    Once the upgrade has completed, you must activate your copy of Windows Vista.

    For more information about how to activate Windows Vista, see the following article:

    How to activate Windows Vista.

    Hope this information is useful.

  • code error-8072

    I can't empty my trash. The operation cannot be completed because an unexpected error has occurred (code error-8072).

    Does anyone have an idea what this error code means? Or better yet, how to fix this?

    Stop

    Unplug your external devices

    Restart in safe mode

    Try safe mode if your Mac does not end commissioning - Apple Support

    Check your hard drive with disk utility

    Using disk utility to check or repair disks - Apple Support

    then empty the trash

    Stop and reconnect the devices and start normally.

    If the problem persists, check your system with AHT

    Using Apple Hardware Test - Apple Support

  • How can I fix the code error 56?

    Two years ago, I bought my iPhone6 (to the US Apple store) and I used iPhone6 in South Korea. So, I can't take refurbish here.

    When I was trying to update iso 9.3, pop up code error 56 at the end of the update process. so, I removed the chip from the usim card and tried again. but the pop-up code error 56 again. How can I fix this error?

    Take a look at these articles:

    Solve the iOS update and restore error in iTunes - Apple Support

    Get help with iOS update or restore errors - Apple Support

  • Get a zip code error when your book order

    Getting a zip code error when your book order is exact zip code th for my address.

    In the Canada.

    Help

    You order the Canadian Apple store online? If this isn't the case, then you must change your store site online on the Canadian site. Scroll down to the bottom of the page where you should find an icon of circled on the right corner flag. Click it, and then select the Canadian store in the list and re - buy article. It must now accept Canadian postal codes rather than postcodes American.

  • My iMac news, sharing and permissions had a name 'wheel' that I didn't put there. When I try to delete it, I get code error-8076. Any thoughts?

    My iMac news, sharing and permissions has a name 'wheel' that I didn't put there. When I try to delete it, I get code error-8076. Any thoughts?

    It is a part of the OS and nothing to worry about.

    https://en.Wikipedia.org/wiki/wheel _ (Unix_term)

  • My browser is blocked for security reasons. Code error-QFR5000RT11C. My incoming connections in open State distance. Then I got the call from the United States 1 (866)986-3669, I picked up the phone, but they put the phone down. No matter what? Help, plea

    My browser is blocked for security reasons. Code error-QFR5000RT11C. My incoming connections in open State distance. Then I got the call from the United States 1 (866)986-3669, I picked up the phone, but they put the phone down. No matter what? Help, please.

    It's probably a SCAM.  Do not call these numbers.  Force Quit Safari and reopen it by holding down the SHIFT key.

    Ciao.

  • Compaq cq10: need help please code error: CNU0015RN9 on compaq cq10 150ev

    Need help please code error: CNU0015RN9

    Thank you in advance!

    Hello

    No problem. Did you do a hard reset and try again?

    For the error code, check again a time-

    Try:

    e9l11f3zv7

    all lowercase letters

    first letter is a small suitcase E
    second is number Nine
    third letter is small case L
    fourth & fifth is number one
    Sixth letter is small box F
    seventh is number three
    eighth letter is small suitcase Z
    ninth letter is small case V
    the last is number seven

    Concerning

    Visruth

  • message of undefined LabVIEW on custom codes error code

    "I use the VI General error handler to define custom errors, I have inserted all entries for this vi (user-defined descriptions, codes, user-defined error code, source of the error, type dialog and error in) but some I still get the message:"

    This error code is not set. Undefined errors can occur for several reasons. For example, no one has provided a description for the code, or you could have wired a number which is not an admission of error code error code.

    In addition, undefined error codes can occur because the error concerns a third object, such as the operating system or ActiveX. For these mistakes of third parties, you may be able to get a description of the error by searching on the Web for the error code (5501) or to its hexadecimal representation (0x0000157D). "

    Why? someone, anyone, help!... Thank you very much

    How you use the error handler General VI? Do you have examples of code?

    The following code displays the error dialog using my custom error description and the 'message' is also used my custom error description:

    The error is not changed - if I go to "explain the error", he then returned to the standard description for this error code (i.e. undefined). Using the Manager general error applies only the descriptions of the user to the call of the VI. You can always create a wrapper for the General error handler that has all your descriptions/error codes defined and then use it instead of the built-in one.

    To change the database from LabVIEWs internal error and/or include with a built application (one of the build specification options), you must use the custom error files.

Maybe you are looking for

  • Error of M602 with WJA 10.3 SR8

    I got about 80 printers installed in HOSTS and works very well. However two LJ M602 printers have "Device communications error" messages and any attempt to obtain information in the Config tab result in "error of reading the parameters of the device.

  • How to recover photos from iCloud in my library?

    For some reason, all my photos in my photo library have moved to iCloud and are no longer visible in my library on my macbook. How to make photos in pictures on my laptop?

  • What is the higher Mac OS x update, my computer will accept

    Hello everyone. I wanted to update my MacOSX software but I don't know which is the most recent upgrade and how which software I top the. I have to download 10.9 to edit my images of the gopro on my desk. I really don't want to upgrade, but it seems

  • HP Photosmart 5520: Scanner is busy status message

    I have a Photosmart HP 5520 Print Scan copy Web. It is connected to a HP Pavilion running Windows 8.1 wireless it was working fine but now when I try to scan something I get the message "Scanner is busy", but it is not. I can still print and copy but

  • Binary SMS

    Hello We want to send binary information to our application via SMS. Our problem is that the BB app is we deliver the message as a text message and corrupt the information. We need of the information, as it is sent, if we want to be notified by a bin