Backup DR with vRanger connection devices

Similar Questions

• Backup with vRanger connection using NFS to a Data Domain appliance...

  Did he this?  We are, but have random failures when it appears that the NFS mounting times.   When we go through a connection CIFS on the Data Domain appliance via the server this connection vRanger is installed, we have never failed, but our backup window has passed.

  It's our vSwitch config:

  vSwitch0 - 3 natachasery, vmnic10, vmnic4, vmnic0.  Active service Console Port (vlan id 11) to vmnic0, standby for vmnic4 |  vRangerbackup port vmnic0 standby, active adapter vmnic10, vmotion disabled, group (no ID vlan).  VMotion port group (vlan id 20, active adapter vmnic 4, vmnic0 auxiliary card.)

  Mounting NFS uses only the Group of vRanger connection ports so the primary vmnic10 is used which is an Intel Gigabit VT Quad Port Server Adapter.  The other natachasery is on different maps, being an other Intel 82571EB and the vmnic0 is a Broadcom NetXtreme II BCM5708 onboard.  I read that it is not recommended to use different providers on the same port group.

  One of the experts want to chime on this config?

  Kind regards...

  Jamie

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '.

  Remember, if it isn't one thing, it's your mother...

  I would say that you have a problem NFS.  Try to push a huge file as NFS (no backup) and see what happens.

  It should be pretty easy.  I don't know how you have it setup, but I would set the NFS for vRanger connection VM directly and not try to push the backups for the NFS mount.

  So if your connection VM vRanger is called VCB, and your data store is mounted as NFS01, you must mount NFS01 on VCB via another NIC and do not use the ESX host and the mount rather mount the NFS inside the VM direct.

• Installation of VMware Consolidated Backup with vRanger connection - first installation

  I want to install VCB (for the first time) that will be integrated with Vizioncore vRanger connection.

  Does anyone have a better practice and document installation on the installation of the VCB process?

  Also someone with experience integrating connection VCB with vRanger?

  Thank you all...

  Follow the instructions of vizioncore.  They pretty much say on complete installation.  This is the best practice.

  vRanger connection works very well with VCB.  Install connection vRanger first then install the VCB proxy for vRanger connection.

• Now that the VDR, it's here... all the benefits of continuing with vRanger connection?

  So we do the upgrade to vSphere and I am just wondering should even not bother renewing all my connection vRanger Pro licenses?  Anyone else out there he ditch their 3rd party backup or is there another reason to keep?

  Ask yourself what you want on your VM backups and see if vDR meets these needs. We use vDR instead of VCB now and are very happy with it. It lacks some features, but it comes with vSphere and is better than VCB.

  Once that your virtual machines are upgraded to version 7 hardware backups go faster too. Capacity integrated to establish an archive preset or custom is nice also.

  In addition, the notion that a product should not be used until the day 1 or service pack 1 is far away. Try it yourself and if you are comfortable with it, go ahead. Fear to use products to first release comes from MS products for most horror stories, and the last time I checked VMware is not Microsoft.

• Beginner question absolute to the Labview with GPIB connection device

  Hi all

  Firstly, sorry if my question is already posted, but I tried searching with nothing doesn't.

  My situation: I have a HP digital osciloscope, a HP 54602 B using the GPIB and trial version of labview 8.6. Now, I want to communicate with her from labview. The big question is: how? Before that I used only labview with NI DAQ card and serial port for communications of the instrument.

  the detailed question

  1 is it important (to programming in labview later) what GPIB interface that I use in my computer? Must be of OR? I still have no interface right now.

  2. I ran a search on the osciloscope Web site of NOR and find an instrument driver in:

  http://sine.NI.com/apps/UTF8/niid_web_display.download_page?p_id_guid=E3B19B3E93F7659CE034080020E748...

  . How do they come?

  3. I know there are a few examples for the GPIB, but since I do not have the interface, I can't try it. Is it possible to simulate instruments GPIB?

  Thanks for all your help and assistance

  Hi opiq;

  Welcome to the world of instrument in LabVIEW Control!  I'll try and answer your questions one-at-a-time:

  1. N ° from a point of view of LabVIEW, you can use any interface supported by VISA and your instrument bus.  This includes (but is not limited to) boards of NOR-GPIB, 3rd-party GPIB, USB, LAN, LXI, VXI, PXI, etc..  Of course, if you do not have a GPIB interface, I would recommend a NEITHER - this is the safest way to get the experience 'it works '.  I tend to use an adapter USB GPIB (DISCLAIMER - I work for the OR).
  2. You have two options for installing the device driver.  "" The simplest is in LabVIEW to select Tools "Instrumentation" instrument Drivers find... and use our instrument driver search tool which will be step helps you locate, by downloading and installing the driver.  The other option is to download the zip file, unzip it in \National Instruments\LabVIEW 8.6\instr.lib and restart LabVIEW.  So if you look in your palette of instrumentation, you should see the driver listed under instrument drivers.  The pilot will include some examples of the use of the driver (are all certified instrument drivers).

     In fact, I would recommend this driver rather than that you connected.  It is a more modern design and install examples in the viewfinder of the example ("Help" find examples...).

     Here's a video of the above process (for a different instrument, but the process is the same)

  3. Unfortunately, there is not an easy way to simulate this instrument.  I would just recommend familiarizing yourself with the examples before acquiring a GPIB interface.

• Duplication of backup-based with a connection target

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db dual to 2013/06/21 11:03:04

  RMAN-06136: the auxiliary database ORACLE error: ORA-01503: CREATE CONTROLFILE failed

  ORA-01990: error opening the password file ' / u01/app/db9i/OraHome9i/dbs/orapw.

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  My name of the instance is administrative in auxiliary and administrative in the target (source). Should I create a password on auxiliary file?

  Ok

  The problem is that I need to scp that my archive log files too to retrieve restore procedure, once in place, everything is completed successfully.

• Replace the vCenter without redoing the vRanger connection configuration?

  Hi all

  Experimenting with the new device of VMware vCenter, I ran into a problem with vRanger connection.  I disconnected a host of our existing facility of vCenter and added successfully to the new VCSA.  I also added the new VCSA vRanger connection configuration.  vRanger connection sees the new vCenter, as well as the ESXi host on the new vCenter.

  The problem I see is that jobs do not now for the virtual machines on the host has moved.  I can see the jobs tab in my work, but when I try to run one of them, he fails almost instantly:

  Inventory [vm-11529] node is on a disconnected virtual circuit:

  The work is no longer present in my inventory tab, under the virtual machine in question (I have individual tasks for each virtual computer).  Is there a way to retarget 'with' the new vCenter without having to set up new jobs for each virtual computer after migration?  My concerns are the time to set up 30 + new jobs, the possibility of having to do a backup complete out of sequence, and our peripheral dedupe (ExaGrid) see this new backup as a new source of backup, causing the backup to break chain and forcing the use of the double the hard drive space on our ExaGrids until our retention period is completely recycled (3-4 months).

  Any ideas?

  Thank you

  Judge Quinn

  Quinn,

  Let me be clear. Now your ESX hosts are managed by VCSA, and this one has its own new database. In this case, all the stored in the configuration store object ID is invalid. I'm not familiar with VCSA yet, but if it works with VMware PowerCLI, you should be able to get new IDS and update InventoryNodeVirtualizationObjectId in the BackupTemplateTask table.

  Here is a PowerCLI procedure to get new VM ID. It works with regular, not sure of VCSA VC.

  SE connect-VIServer

  (Get-VM-name ) user.user

  Andrew

• VRanger connection... not much .anyone know?

  VRanger connection with ESXi using seems to be a great mystery for both people vizioncore and vmware.  None of them could tell me what I need.

  I have ESXi installed and works with licensed Essentials Foundation.  I use the latest version of vRanger Pro connection and are still unable to the point where he sees my ESX host in the GUI.

  I went KB vRanger connection and typed in ESXi and NOTHING!

  I added the host ESX vRanger connection using the root account and takes it, but nothing appears in the list of hosts.  I tried to create an account on the ESX host admin, but it wrong when I tried to use it in the vRanger connection gui.

  (MB). Here, any help would be great!  Someone at - it this work with ESXi?  What licenses you had to get VMware to get there?

  Thank you!

  That's right, you will need at least VI3 Foundation and vCenter Foundation to back it up with vRanger connection.  I would check what are the requirements to get the latest version (4.0), but I know what are the requirements for 3.x.  If you are looking for a complete recommended alternative, I would look to Veeam Backup.  It is a really nice product and costs about the same as vRanger connection.

• Backup fails with an error of device 0 x 807812.

  Original title: device error 0 x 807812

  Backup fails with an error of device 0 x 807812. I tried a disk of 1 TB of my book and a Seagate 1 TB Western Digital. Both failed with the same error. The system says that I have the most recent and correct drivers. My computer is Deel Latitude 17r.

  Hi James,

  Thanks for posting your question in the Microsoft Community.

  The error would have occurred if the services associated with Windows backup may have been disabled, you can try to restart the service, follow the steps below:

  1. click on start.

  2 type Services in the start search.

  3. in the search for Windows Services of shadow copy Volume in the list.

  4. right click on the Service.

  5. click on properties.

  6. Select the Startup Type to manual.

  7. click on OK.

  8. repeat the same for the service Windows backup.

  If the problem persists, then I suggest you run the chkdsk command, which fix chkdsk errors, follow these steps:

  i. Click Start.

  II. type cmd in the start search box.

  III. right-click on cmd.exe list programs and then select the run as Administrator option.

  IV. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  v. in the command prompt window, type the following command and press enter Chkdsk /R

  VI. o press when you are prompted to check the drive the next time the system restarts.

  VII. close all applications and restart the computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  When you restart, Windows checks the drive for errors, and then Windows starts. Now run the disk check in command prompt, follow the steps below:

  Now, when you try to perform the backup, I recommend that you can try to disable the temporary security on the computer software and perform a backup, be sure to activate security in the computer software.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• Vista not recognize / connect with any Bluetooth device

  Vista not recognize / connect with any Bluetooth device. I have the Bluetooth dongle into a good usb port, the computer recognizes it, but it doesn't show up

  Bluetooth devices when the device will attempt to connect.

  Is that what you would please stand out my answer as the answer to your problem.

  Marked as answer questions don't get a lot of people looking at them.

  Sorry that he had not helped you.

  Once you disable the my answer option, others will look at your problem and we hope to help you.

  See you soon.

• Server for vmdk hardware backups using vRanger connection

  Hello

  We try to implement vRanger connection for backup of our VMS (ESX 3.5) and would like to have installed on a stand-alone server. There are currently 36 VMs that is likely to grow. Each virtual machine has a disk of 10 GB C residing in SAN. We want to save these files vmdk SAN to the server where vRanger connection is installed.

  Could anyone here suggest some options for a server to have it put in place? Given that the size of the files would be around 400 GB for now and much more later, the speed of the hard drive must be considered too.

  Thank you.

  Cool! So what kind of records should I go then?

  What is your budget?  SAS is the fastest, but we are talking here about 400GB drive will cost twice what a single 1.2 to or even 1.5 TB SATA.  Even if you have the budget for it, it's a complete waste of money, since you can get 4 times the storage for the same price.

  RAID 0 will give you the most performance, however if you keep several revisions on your backup disk, maybe not prudent to use the RAID 0 in the long term, but there again this depends on your backup strategy, you want backups LONG or SHORT term?  If you make full backups every week, as we do, RAID 0 is fine.  We can accept the risk given that do us COMPLETE each week and because backups are unexpected, not to archive, it is not a big problem for us, but every company is different.

  Network is not your main concern, however, if you have a decent network of 1 GB, that's all you need.  Just buy whatever you can afford for storage, if backup speed is your main concern, go SAS, if not go SATA.

• Use iCloud with BMW connected drive... How to get the device recognized by the connected player.

  Using iCloud email with BMW connected drive... How do I get my Apple ID and PW recognized by the BMW connected drive online?

  See here - How do I add iCloud email to the connected reader

• Problem with mobile MTP device connection of Samsung.

  Original title: Device

  I have problems with the devices. When I click my devices and printers, he claims that there is a problem with the driver for Samsung mobile MTP device but when I plug it costs and he finds all my photos. I tried troubleshooting and it says that there is a problem with the PnP device. What can I do to fix this? I have try the resolution of the problems, but it does not work. He also says that my pc Ethernet controller is not installed. Once, I tried troubleshooting but without prevail. If anyone can help with these issues it would be greatly appreciated. I tried a system restore, and it doesn't work anymore.

  Thank you very much

  Hi Chris,

  To provide the proper resolution, I would need more information on your side.

  1. which version of the operating system are you using?

  2. What is the brand and model of the computer?

  3. What is the exact model of the Samsung Mobile?

  4. what measures all troubleshooting have you tried?

  This problem may occur because of corrupted device driver.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Method 2:
  If the problem persists, try to install the latest driver for Samsung mobile device MTP on the manufacturer's Web site.

  http://www.Samsung.com/us/support/supportMain.do

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.