Backup error code Ox81000019

Similar Questions

• performing backup error Code: 0x80071AC3 need to format NTFS

  try to backup

  Iomega desktop drive usb2 hard

  format system asked to continue

  format does not have NTFS

  only ex FAT

  Error code now 0x80071AC3

  cannot continue with the backup

  I added an iomega desktop hard drive, the system asked me format may only need of presentation in ex FAT NTFS to make my backup, error Code: 0x80071AC3 now can't go back to my new HDD desktop please help

  Hello

  1. you try to take backup using Windows backup?

  2. what security software is installed on your computer?

  3. have you made changes on the computer before this problem?

  4. were you able to create a backup successfully earlier?

  5. are you able to format the Iomega hard drive to NTFS?

  I suggest you try to check the drive for errors and check if it helps.

  Check a drive for errors:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Warning: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  See the following Microsoft article and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/how-do-i-format-a-hard-drive-to-NTFS-in-Windows-7/a18948c1-ca88-473c-85d0-eda64b94a730

  Please provide us with more information, so that we could help you to solve the problem.

• "unable to complete backup" error Code 0 x 80070002

  Original title:

  Error 0 x 80070002

  Windows 7 Home Premium Version

  Seagate external hard drive / software Acronis

  I am unable to complete my WIndows 7 Home Prem to backup on my Segate external drive.  63% in the backup, I get "unable to complete backup" error Code 0 x 80070002.  How can I get my support to end?

  Hello

  Welcome to the Microsoft Community Forums.

  From your post, it seems that the backup is not complete and give you an error code: 0 x 80070002.

  Quick questions:

  1. What is the full error message?

  2. how many profiles user is there is your computer?

  3. What Backup program do you use?

  This problem may occur if:

  Cause of scenario 1

  This problem occurs if you save a library that contains custom folders that are located under your user profile.

  Cause of scenario 2

  This problem occurs if the following conditions are met:

  ·         Backup Windows tries to back up files in folders LocalLow, Contacts and research.

  ·         These files are not present on your computer.

  Note These files are only created if certain applications are installed on the computer.

  Cause of scenario 3

  This problem occurs if the following conditions are met:

  ·         The computer has an NVIDIA USB EHCI Enhanced Host Controller Interface () chipset.

  ·         The computer has at least 4 GB of RAM.

  ·         You try to copy data from the computer to an external USB storage device.

  If you use the Windows backup program then please go and follow the methods mentioned below and later a update on the State of the question.

  Method 1: 0x8100002F error code and error code 0 x 80070002 when you back up files in Windows 7:http://support.microsoft.com/kb/979281

  Method 2: Try to run the check disk on the system using the link below.

  Check your hard drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope that it helps post back if you have questions about Windows and we will be happy to help you.

• backup error code 0 x 80044321

  error code 0 x 80044321

  Hello

  You give enough information as to how you are trying to back up and where you're trying to save up to.

  Read these general information:

  This information can help you.

  If you want to make a complete PC Backup or a backup file only, buy an external hard drive.

  Only Vista professional, comprehensive and company have the opportunity to make complete backups of PC.

  All editions of Vista can do backups of files

  Here's how to back up and restore your files:

  "How to back up your data.

  http://www.wintuts.com/how-to-backup-your-data

  "How to restore your files.

  http://www.wintuts.com/how-to-restore-files

  This is how to do a full backup of the computer and how to restore it (for Vista Business, Ultimate and Enterprise only):

  «How to make a backup of the computer in Vista»

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  "How to restore a full backup of the computer.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  FAQ from Microsoft about backup and restore:

  "Back up and restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  See you soon.

• External backup error code 0x80070005

  I get a error code 0x80070005 when I try to do a full back up to my external hard drive.  He says "access denied" but I am the administrator. This problem just started.  I disconnected and reconnected the external drive and my computer recognizes that there is no problem.

  Hello

  1. don't he stops at any specific file?

  2. do you have permissions to the entire file for the files that you are backing up and to the destination you save back to the top?

  3. don't you make changes to the computer until the problem occurred?

  To work around the problem, you will need to follow the steps below.

  Step 1: I suggest to try to create a backup in the clean boot state and make sure that the antivirus software is disabled temporarily and check if that helps.

  Follow the instructions in step 1 in the following article. Run the backup and check if that helps.

  http://support.Microsoft.com/kb/929135

  Note: make sure you put the computer to a Normal startup, once the troubleshooting completed.

  Disable the anti-virus software

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Hope this information is useful.

• Dell DataSafe Online Backup Error Code BuEng_2810

  Can anyone help? I am at a loss. I tried in vain to save and receive this message.

  Error code: BuEng_2810

  Redirector Server unavailable (or inaccessible because of the firewall). Check your Internet connection or your Internet security settings

  Thank you very much.

  All together. After several reboots computer, I was able to backup without problem.

• Windows 7 - backup error code: 0 x 81000019

  How can I fix this prob.

  Hey IanCraigie,

  For starters, you disable your firewall and anti-virus soberly when you save correct? If this isn't the case, you should do this.
  Also reading your question, I have found a thread that I think will be very useful for you.
  Windows 7 RC backup fails - error code 0 x 81000019
  [Backup Windows 7] Error code: 0 x 81000019
  w7x64rc backup fails with the error code 0 x 81000019
  Look through these threads and try some of these steps. If you have any questions, return to this topic and explain what were your results. Be sure to include all the details that you can when you describe your results.
  Thanks for posting of Microsoft Answers! Good luck with the troubleshooting.

• Windows backup error Code: 0x8007007B

  I have a Lacie external hard disk, and the drive letter is H for it on my system. I run the "Backup and Restore" program of Windows 7 and accept the default settings. I put the location of the backup on my drive (H) and start the backup process. The system starts the backup with the progress bar. After about 6-7 minutes, the red bar appears and the system said of "the last backup failed with success." Click on for more information, the system gives the following details:

  The file name, directory name or volume label syntax is incorrect

  Error code: 0x8007007B

  What is wrong on Earth?

  Hello

  Check if you have two drives C: in the list with the same name of Volume (see figure below). Uncheck the box for the double volume and select the check box for the good player (the one with the Windows logo).

  
  Fig 2: System Restore enabled for the wrong drive. (The image is for the restoration of the system; in your case check in the backup and restore)
  
  If you can't find two volume labels then try that explained below.

  Not sure of the problem. But give it a try. Reset your default backup and start over. Make sure you have disabled any antivirus on the computer temporarily.

  Support user and system - reset the default Configuration files

  http://www.SevenForums.com/tutorials/632-backup-user-system-files-reset-default-configuration.html?LTR=B

  If u look around here in the link it seems to be several different backup problems.

  Let me know what happened

  $C

  God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart

• Cannot view or change the settings of backup - error Code 0 x 80070422

  I am able to run a backup using the existing settings/settings I put when my system was new two years ago.  I just ran a backup and finished without any problems.  But when I click on "Change settings" to view the settings, I get the error code 0 x 80070422.  Error message States "the backup application could not start due to an internal error" followed by "the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  I already read many posts on this site about this error and how to correct.  I followed the suggested steps to fix the problem, but the error persists. =(

  Specifically, I checked that the following Services are enabled.

  -"Remote Procedure Call" (RPCSS) must be active, Automatic.

  'COM + Event System"(EventSystem) must be active, Manual.

  -'System Event Notification Service"(SENSE) must be active, Automatic.

  -"Volume Shadow Copy" (VSS) must be active, Manual.

  'Microsoft Software Shadow Copy provider' (SWPRV) must be active, Manual.

  I also ran an SFC scan and received the following confirmation at the end-

  "Windows resource protection has not found any breach of integrity."

  Any suggestions on the next steps, I could try to fix this? 

  Thank you!

  Hello

  Please provide detailed information on this issue and I appreciate your valuable troubleshooting efforts toward the resolution of the problem.

  However, we are still missing about two or three services so that this error happens when the necessary services are disabled.

  Method 1: Please check these services.

  • Block level backup engine - active - repair manuals
  • -Active - backup manual Windows

  If the settings above does not work, you can try to adjust Volume Shadow Copy (VSS) on Automatic and check if that helps. Then change it back to Manual after verification.

  Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

  If the problem persists, follow the next method.

  Method 2: Disable the antivirus.

  You can also try to temporarily disable the security software of the computer and try to create a backup and check if it works. If you are able to create a backup, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Set up or change automatic backup settings

  Back up your programs, files and system settings

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• Windows 7 - set up a backup - error code: 80070422

  Trying to make a backup for the first time on Windows 7 and get error code 80070422.

  A run "sfc /verifynow" to check the file system and had no reported problems.

  The following services are started:

  COM event system + / start / automatic

  DCOM Server process Launcher / start / automatic

  Microsoft Software Shadow Copy Provider / start / manual

  Remote procedure call (RPC) / start / automatic

  RPC end point mapper / start / automatic

  Shadow copy volume / start / manual

  Windows backup / start / manual

  Any thoughts on what to try next?

  Thank you

  Sherman

  Hello Sherman,

  Thanks for posting your question in the Microsoft Community. We are happy to help you.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1. Do you take backup on an internal hard drive or an external drive?
  2. Significant changes were made to your computer before this problem?

  In addition to all the services you mentioned, I suggest you to check and make sure that the following services are started and set to automatic.

  Motor Service-level backup Windows Event Log & Task Scheduler

  If the problem persists, try the following steps.

  Step 1:

  Try to take backup after you put your computer in a clean boot state, that State to the clean boot your system help determine if third party applications or startup items are causing the problem.

  Perform a clean boot.

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Step 2:

  I would also say that you check your hard disk for errors.

  Check a drive for errors
  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important: All performing hard disk the disk check if bad sectors are found on the disc hard when the disk check try to repair this area so all available data on this risk to be lost.

  For more information, please visit the following links.

  Backup and restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  Backup and restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/back-up-restore-FAQ#1TC=Windows-7

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

  Thank you.

• computer don't backup error code 0 x 810000019

  I don't know much about computers but I have a dell inspiron with windows 7 and I wanted it back up to an external hard drive. the hard drive is a type of western digital passport with just about a terabyte of free. my computer also has plenty of open spaces. whenever I try to save an error message appears on my screen saying: "a snapshot could not be created. Check the event logs "VSS" and "SPP" application for more information. Details: the specified object is not found. "in the more information section it says error code:

  0 x 810000019

  I have no idea of what a the application event log is or how to get to him, but it makes no sense as to why my computer won't save. any help would be appreciated.

  See this post: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/get-error-code-0x810000019-when-back-up-to/15474218-ff7b-e011-9b4b-68b599b31bf5?msgId=a24f85fa-be9f-451e-a313-eeba05a06322

  Could be the issue of the volume shadow copy service.

  J W Stuart: http://www.pagestart.com

• Can't do a backup error code 0 x 81000033

  As far as I can tell that this problem has been in existence for at least six months. I have just updated to Windows 7, MSFT is well aware of this problem, why have they not put an update? I have read the information written by MSFT employees who seem to be a cure, the problem is a problem to understand the functioning of a computer to accomplish the Herculean task which they suggest. I just want my computer to work. Can someone give me please a simple to follow instructions.

  You just need to create a new partition on your hard disk to use for backups. Go to control panel - system and safety - create and format hard disk partitions. Once there right click on your drive and reduce the volume of a few GB in order to free up space. Then right-click on the empty partition and select create volume simple. You will be able to give it a new drive letter (C, D, etc.) so when you do change your backup settings to use the new drive letter and it should work for you.

• Error code 0 x 80070002-Windows 7 backup

  There is a glut (too much) threads on this Windows Vista, 7,? system backup error code 0 x 80070002. It happens from time to time for me. And the various 'solutions' are the construction of a new system to play with the registry. EU burn can't read for hours, what I found on this topic.

  Microsoft - get out this problem to all users in one breath, Email or something else, a solution which is simple. At least you get the name of the file or files to us give a clue to the problem, rather than the generic files:

  "The system cannot find the specified file" is like asking "How do for your office? MS response: "Just drive around town until you see me wave on the 100th floor window."

  It is just too punk to that always have a problem since at least 2010.

  My solution - rerun backup. Sometimes, she finishes the second time. If this isn't the case, restart and don't let any other non-OS apps run during backup.

  Is there are a few system logs that will point to which file or files 'the system cannot find...' is originally this error code, I would be recognizing access to information.

  Peace - BJEvS

  MS could produce a report and the list of failures

  It does in the event viewer. Filter the log of Applications on Windows Backup.

  A typical abridged report is detailed below:

  Log name: Application

  Source: Windows Backup

  Date: 05/05/2014-16:53:09

  Event ID: 4100

  Level: error

  Description:

  Backup failed because a snapshot could not be created. Free up space on the drive that you save by deleting unnecessary files and try again.

  This service cannot be started in Mode safe (0x8007043C)

  General remarks on the event http://www.gerryscomputertips.co.uk/syserrors5.htm Viewer

• Get 0x800703EE and 0 x 80070022 error code while trying to perform the backup in Windows 7.

  * Original title: backup error code windows 7; 0x800703EE when I looked for details: a file was opened from outside. Option: Repeat the backup, or change the settings, I repeated backups and got the error code: 0 x 80070022

  A few weeks ago another backup problem followed a clean boot Advisor do not understand warnings lost a lot of files, but managed to finish the backup and for a few weeks or if weekly backups on my acer aspire was dandy until this week. On the way to this site saw an ad "fix windows errors by downloading this program. I wonder if these ads are genuine and not a virus or malware. you will advise me on how to go about these sorts of things. Thanking you in advance.

  Hi Jamshid,

  I understand the inconvenience that this may cause.

  This problem could occur due to the corruption of system file by the program that you downloaded.

  The fixit or any program you download on the internet could be a source of pollution. It is not recommended to install the advertising programs.

  To resolve this problem, I would like you go to control panel and remove the program downloaded.

  Here is the link to remove the program.

  http://Windows.Microsoft.com/en-us/Windows/uninstall-change-program#uninstall-change-program=Windows-7

  You can also use the System File Checker scan to remove the corrupt files.

  SFC (System File Checker) is a tool that scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  http://support.Microsoft.com/kb/929833

  To ensure that your computer is virus-free and spyware, run a scan online using the link below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Keep us informed on the status of the issue. We will be happy to help you.

• Backup error Ox8100002F code

  After the backup to an external drive, some files have been ignored. Investigation, backup error code
  Ox8100002F led

  Hello
   
  The error message indicates that the backup was successful, but ended up jumping places as he could not locate them. So I guess you must have changed the location of the folders listed in the error message.  This is why the corresponding library was not accessible using the EXPLORER User Interface.
   
  To work around the problem, try this:
   
  1. click on 'Change backup settings' of the troubleshooting dialog box.
  2. expand the node of the user whose libraries are reported as ignored.
  3 deselect the library which is at the origin of the problem.
  4 expand the 'Computer' node in the tree, and then select the redirected folders location.
  5 save settings.
   
  A more in-depth review are visible to:
   
  Backup of Windows 0x8100002f error code
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/148b768b-4a25-4c05-A333-447a487d0a44

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.