Backup failed: cliché has expired

Similar Questions

• TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not

  GANYMEDE + configured on the router and the router is in ACS.  I can ping from the ACS, but the router cannot establish a connection to authenticate users.

  AAA server Ganymede group + hq_acs-1

  Server 10.20.17.2

  Ganymede IP source-interface GigabitEthernet0/0

  !

  AAA authentication login default group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local

  AAA authorization commands by default group Ganymede + local 10

  AAA authorization commands 15 default group Ganymede + local

  nested AAA accounting

  AAA accounting newinfo periodic update 60

  AAA accounting auth-proxy default start-stop Ganymede group.

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  AAA accounting network default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  AAA accounting resource by default start-stop Ganymede group.

  BigTree_3945 #sh ip int br

  Interface IP-Address OK? Method State Protocol

  GigabitEthernet0/0 10.4.3.1 YES NVRAM low low

  GigabitEthernet0/1 10.12.10.26 YES NVRAM up up

  Serial0/2/0 unassigned YES NVRAM low low

  Serial0/2/0.602 10.12.15.10 YES NVRAM low low

  11:08:13.673 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:13.673 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:13.675 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:13.675 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:13.675 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:18.676 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:18.676 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:18.676 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:25.834 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:25.834 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:25.834 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:25.834 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:25.834 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:30.836 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:30.836 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:30.836 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:43.689 Apr 13: TAC: using default Ganymede groups ' Ganymede"list."

  11:08:43.689 Apr 13: TAC +: opening TCP/IP 10.20.17.2/49 Timeout = 5

  11:08:51.057 Apr 13: MORE: Queuing AAA request authentication 79 for the treatment

  11:08:51.057 Apr 13: MORE: treatment demand beginning 79 authentication id

  11:08:51.057 Apr 13: MORE: authentication start package created for 79 (cisscdb)

  11:08:51.057 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:51.057 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: started 5 sec timeout

  11:08:54.692 Apr 13: TAC +: TCP/IP open to 10.20.17.2/49 failed - connection has expired; remote host does not

  11:08:54.692 Apr 13: MORE: Queuing AAA accounting request treatment 76

  11:08:54.692 Apr 13: MORE: treatment of the accounting application id 76

  11:08:54.692 Apr 13: MORE: sending AV task_id = 332

  11:08:54.692 Apr 13: MORE: sending AV timezone = EDT

  11:08:54.692 Apr 13: MORE: AV = shell shipping service

  11:08:54.692 Apr 13: MORE: sending AV start_time = 1334329734

  11:08:54.692 Apr 13: MORE: sending AV priv-lvl = 15

  11:08:54.692 Apr 13: MORE: sending AV cmd = show logging

  11:08:54.692 Apr 13: MORE: request for accounts created for 76 (n20j03t)

  11:08:54.692 Apr 13: MORE: using the 10.20.17.2 Server

  11:08:54.692 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: started 5 sec timeout

  11:08:56.058 Apr 13: HIGHER (0000004F) / 0/NB_WAIT/1BDD9C34: expired

  11:08:56.058 Apr 13: HIGHER (0000004F) / 1BDD9C34/NB_WAIT/0: expired, cleaning

  11:08:56.058 Apr 13: HIGHER (0000004F) / 0/1BDD9C34: the package of treatment response

  11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired

  11:08:59.693 Apr 13: HIGHER (0000004C) / NB_WAIT/1/20FD90EC: expired, cleaning

  11:08:59.693 Apr 13: 1/HIGHER (0000004C) / 20FD90EC: the package of treatment response

  BigTree_3945 #.

  The AAA Client IP address	10.4.3. * 10.12.15.10
  Key
  Group of network devices	Test NJT AccessLink (Not assigned)
  Authenticate using	GANYMEDE + (Cisco IOS) RADIUS (Cisco Aironet) RADIUS (Cisco BBSM) RADIUS (Cisco IOS/PIX) RADIUS (Cisco VPN 3000) RADIUS (Cisco VPN 5000) RADIUS (IETF) RADIUS (Mount) RADIUS (Juniper) RADIUS (Nortel) RADIUS (Sepi)
  Connect GANYMEDE + single AAA Client (stop recording in accounting in case of failure).

  The 10.12.10. range * is listed under the HQ site.

  Your help is greatly appreciated.

  You said that you can ping the router ACS, have you tried the GigabitEthernet 0/0 interface packages (that is those THAT GANYMEDE + will attempt to use, given the configuration you have posted) supply?

  What is the network path between the router and look like ACS (IE, a firewall, NAT, etc.)?

  Can you connect to port 49 to the IP address of the router GBA, GigabitEthernet 0/0 of supply packages?

  Using VRF?

  Which version of IOS?

• Administrators password has expired and I can't seem to change even with a backup drive

  original title: password expiration

  OK so my administrators password has expired and I can't seem to change even with a backup disk can anyone help me pleasssseeee!

  Hello

  ·         Your computer is on a domain?

  If the computer is on a domain, you may need to contact the system administrator for the renewed password.

  Microsoft cannot help you recover passwords for Microsoft who are lost or forgotten products. You can go through the article below.
  "Microsoft's strategy concerning lost or forgotten passwords"

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Linux has failed with the error: try to contact the assistance service has expired

  Hi all

  I would like to convert a Linux server on a VMware VM and still get the same error:

  [error 00848 ' task-12' "] Receipt of exception while trying to connect to helper in 10.158.19.22 port 443: try to contact the assistance service has expired

  I'm using Converter standalone 5.1.0.

  Support VM network is configured to obtain an IP via DHCP (it works fine as I can see DHCP lease on my DHCP server)

  But in the newspaper, I get a lot of these errors:

  from journal

  -> The remote host certificate has these problems: -> -> * Hostname does not match the name of the subject in the certificate. -> -> * certificate of self-signed certificate chain) 2013 07-30 T 11: 35:05.411 + 02:00 [00716 error "HttpConnectionPool-000000' '] [ConnectComplete] failed to connect to < cs p:0763 c 790, TCP:10.158.19.22:443 >; CNX: (null), error: class Vmacore::Ssl:SSLVerifyException(SSL_Exception:_Verification_parameters:) -> PeerThumbprint: 1 d: D8:6 C: B1:61:6's: F7:D2:CC:45:A4:77:A7:61:98:14:FA: DA: 59:65 -> ExpectedThumbprint: 51:82:8 C: B6:F7:E7:29:B5:0's: D7:B5:AB:DC:FC:B0:17:55:3F:E5:B8 -> ExpectedPeerName: < ip_address my - >

  I have attached the complete log.

  Does anyone have an idea to help me?

  Kind regards

  Pouine

  Can you then try to install the converter in a VM in the same local network where the destination will be (i.e. where the assistance program runs)?

  As for what happens - it is really very strange. Here are the symptoms of a hacking of man-in-the-middle. It is probably not the case, but I have no idea what it could be.

  Kind regards

  Plamen

• ORA-27369: jobs of type EXECUTABLE failed with exit code: key has expired

  Hello
  
  I defined the next shift on Linux Redhat 5.4 & DB Oracle 10.2.0.4:
  

  BEGIN
    dbms_scheduler.create_job(job_name        => 'expjob',
                              job_type        => 'executable',
                              job_action      => '/EXPORT/scott_cmd',
                              enabled         => TRUE,
                              auto_drop       => FALSE);
  END;
  /
  
  drwxrwxrwx   2 oracle oinstall  4096 Jul 10 19:19 EXPORT

  where:
  

  /home/oracle>cat /EXPORT/scott_cmd
  #!/bin/sh
  exp parfile=./scott.par
  
  /home/oracle>cat /EXPORT/scott.par
  FILE=scott.dmp
  USERID=STRMADMIN/STRMADMIN
  OWNER=SCOTT
  LOG=scott.log
  
  /home/oracle>ls -l /EXPORT/scott_cmd
  -rwxr-xr-x 1 oracle oinstall 34 Jul 10 19:16 /EXPORT/scott_cmd
  
  /home/oracle>ls -l /u01/app/oracle/OraHome_1/rdbms/admin/externaljob.ora
  -rw-r--r-- 1 root oinstall 1575 Jul 10 18:42 /u01/app/oracle/OraHome_1/rdbms/admin/externaljob.ora
  
  (run_user = nobody
  run_group = nobody)
  
  /home/oracle>ls -l  /u01/app/oracle/OraHome_1/bin/extjob
  -rwsr-x--- 1 root oinstall 64842 Jul  8 14:21 /u01/app/oracle/OraHome_1/bin/extjob
  
  /home/oracle>ls -l  /u01/app/oracle/OraHome_1/bin/extjobo
  -rwxr-xr-x 1 oracle oinstall 64842 Jul  8 14:21 /u01/app/oracle/OraHome_1/bin/extjobo

  When I executed as user STRMADMIN (a DBA & CREATE JOB Privileg) work, I always get the error:
  

  /EXPORT>sqlplus STRMADMIN/STRMADMIN
  
  SQL*Plus: Release 10.2.0.4.0 - Production on Sun Jul 10 19:40:24 2011
  
  Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
  
  
  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> exec dbms_scheduler.run_job('expjob');
  BEGIN dbms_scheduler.run_job('expjob'); END;
  
  *
  ERROR at line 1:
  ORA-27369: job of type EXECUTABLE failed with exit code: Key has expired
  ORA-06512: at "SYS.DBMS_ISCHED", line 150
  ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
  ORA-06512: at line 1
  
  
  SQL>

  Help, please
  
  concerning
  
  hqt200475
  
  Published by: hqt200475 on July 10, 2011 10:04
  
  Published by: hqt200475 on July 10, 2011 10:05

  The only thing else I see is

  QUEUE = Scott.dmp
  LOG = Scoot.log

  Not sure how Planner will know what directory to write these.

  Is it possible to provide a full path?

  Best regards

  mseberg

• Cannot send emails. Message says "sending message failed because the connection to the server outgoing (SMTP) has expired. Is the fault with Thunderbird or BT?

  Cannot send emails. Message says "unable to send message because the connection to the outgoing (SMTP) server has expired." By default the SMTP seems correct. Any ideas how to solve this problem?

  Oh, we still think. Using anti-virus software? It scans your outgoing messages? Try to turn off the power; It can slow down transmission in order to trigger a timeout on the server.

• Big fail: CC says that my subscription has expired, but it will expire August!

  I have a subscription that will expire on August 17.

  But my client says my subscription has expired.

  Why?

  I need to work

  That's what the CC for the team, please contact our support chat to http://adobe.ly/yxj0t6

  Concerning

  Baudier

• iTunes backup fails - Solution: conflict with ZoneAlarm

  For the last 2 months my iTunes (12.3.3) on Windows 7 has been doing more slow slow and glacial as when attaching an iPhone or an iPad (iOS 9.3) for synchronization.

  Last week, I started to receive messages from "backup failed...". "and occasional 0xE8000003 and unable to connect at all errors.

  Apple Support Articles are excellent and give you all the variants. I tried:

  (1) different cables USB-brightening

  (2) different USB ports

  (3) turn off all firewall and virus software

  (3) change the iTunes library for the last one which had sync

  (4) by removing the Lockdown folder

  (5) removing all the old backup files

  (6) replaces the backup files with those who worked from a Mac

  (7) uninstall and then reinstall all the software Apple

  (8) repeated several times in different order

  Finally, I called Apple Support... which were promptly, asked all the right questions and eventually degenerated the problem to engineering. I can't say enough good things about the apple (Attaboy Gabe and JD) support. What is particularly remarkable because my problem was clear Windows on a PC!

  In the meantime, I decided to try not only leave my protection software (CheckPoint ZoneAlarm Extreme) but uninstall. After an uninstall using 'Clean' removal of Checkpoint app, I discovered several registry entries and many services are still active. Most annoying, they have been services that I had never activated to start (ZA Privacy Service, anti-theft ZoneAlarm and Zone Alarm AntiKeyLogger). Start in safe mode, I finally could remove these services and remove all debris from the registry.

  Success. iTunes is now responsive again and fast when I plug an external device!

  The lesson learned for me coming out of the firewall and antivirus that has worked in the past to isolate conflicts as it did not remove its tendrils in Windows as advertised. Even uninstalling was incomplete and left debris.

  Zone Alarm, followed...

  "They just released a new version today which lists the indefinable Fixed: incompatibility with ITunes" in the notes.

  The previous version that caused the problem was released on February 16, 2016, but there is no information in their support on any issues site.

  ZoneAlarm is repeated consumption of abnormal resources guilty and former bad behavior with iTunes. They blocked again.

  

• Version 4.0.1 will not allow exception certificate when it has expired

  SSL connection fails with "an error occurred during a connection to 24xx:xxxx:x:xx:443.

  Certificate of the issuer of the certificate has expired. Check your date and time system.

  (Error code: sec_error_expired_issuer_certificate).
  Previous versions of Firefox allows me to add an exception. This one doesn't. I get the same error with certificate to get. I deleted the previous certificate information and it will not be reset on a new connection attempt. Is this a bug? I get in fine with IE.

  Try to manually add an exception in Certificate Manager.

  • Tools > Options > advanced > encryption: Certificates > view certificates > servers

• Backup failed with error 18: the backup drive is not found

  Hello

  My guard time capsule saying "Backup failed" for a few days and I cannot access the old backup files either (when I enter my time machine it shows 'today', which is kind of scary, although I know that my old files is still there). I tried many ways to trouble shoot this problem, but none of this has worked. In my opinion, it's more a network problem and I made sure I connect Wi - Fi even my time capsule created.

  So far I have tried:

  -Delete the files from my internet (com.apple.airport.preferences.plist; preferences.plist and NetworkInterfaces.plist, etc.) and restart my mac

  -Remove TimeMachine.plist and restart my mac

  -Hard reset of my time capsule. Went through all configurations with success but then still backup missed (I hear the running time capsule when it is by train).

  I share this time capsule with my wife and she has no problem with that.

  I can only think of a possible alternation I did which could cause this problem.

  Because of unstable WiFi problem, I had deleted

  com Apple.Airport.Preferences.plist

  com.Apple.Network.identification.plist

  NetworkInterfaces.plist

  Preferences.plist

  or other files and reboot my mac * before * I had this problem with time capsule.

  However, this is not the first time I do it, and it wasn't a problem before...

  This could be the reason? If so, how to restore the network settings?

  Please help me with this problem. Really appreciate!

  Ted

  Here is a copy of the Console:

  24/02/16 2:44:19.308 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:44:19.309 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:44:19.313 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:44:35.326 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: error - 35 during the resolution of the backup destination alias

  24/02/16 2:45:29.976 AM com.apple.backupd [857]: attempt to mount the destination network URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:30.668 AM com.apple.backupd [857]: destination network mounted at the mounting point: / Volumes/data using URL: afp://Ted%20Ling@TJ's%20AirPort%20Time%20Capsule._afpovertcp._tcp.local./Data

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:45:50.428 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:45:59.981 AM com.apple.backupd [857]: NAConnectToServerSync failed with the error: 64 (host is out of service) for url: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.807 AM com.apple.backupd [857]: Timed out while solving Hello destination: afp://Ted%20Ling; AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. / data

  24/02/16 2:46:42.812 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:42.814 AM com.apple.backupd [857]: the airport of Destination Flymi Time Capsule could not be found (url: afp://Ted%20Ling;) AUTH=SRP@Flymi's%20AirPort%20Time%20Capsule._afpovertcp._tcp.l ALCO. (/ data destinationID: B2187361-58BC-4D33-A7AC-1DDC429ABF3B)

  24/02/16 2:46:42.825 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:46:42.833 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:46:50.544 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:46:50.604 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:47:16.683 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:48:20.566 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:48:44.360 AM com.apple.backupd [857]: wait 60 seconds and try again.

  24/02/16 2:49:48.014 AM com.apple.backupd [857]: network destination already mounted to: / Volumes/data

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:11.885 AM com.apple.backupd [857]: give up after 3 attempts.

  24/02/16 2:50:11.903 AM com.apple.backupd [857]: backup failed with error 21:21

  24/02/16 2:50:27.245 AM com.apple.backupd [857]: impossible to eject the volume/Volumes/Data (FSVolumeRefNum:-111; status:-47; dissident pid: 0)

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: from manual backup

  24/02/16 2:50:27.250 AM com.apple.backupd [857]: Destination Time machine could not be found (url: destinationID (null): AB78050D-4852-489D-9CBF-88727FBC8047)

  24/02/16 2:50:27.257 AM com.apple.backupd [857]: backup failed with error 18: the backup drive is not found.

  24/02/16 2:52:28.390 AM SystemUIServer [265]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  24/02/16 2:52:28.390 AM com.apple.prefs.backup.remoteservice [866]: try using XPC with a MachService which has the value HideUntilCheckIn. This will result in unpredictable behavior: com.apple.backupd.status.xpc

  What model is the TC?

  Try to force the connection to 2.4 ghz using different names for the various bands... or even better to use ethernet.

  (You may need to buy love at first sight for adapter Ethernet... is an investment worth considering how unreliable wireless).

  Also give me some screenshots of the TC installing airport utility.

  Can you get it in the Finder?

• How to retrieve info from my i5c if the screen does not work and the warranty has expired?

  My iphone 5 c screen does not work and my warranty has expired there is 138days. I visited my carrier (AT & T) and contacted the Apple support.

  I want just the information of contact at least if nothing else my phone. What can I do?

  Have you tried to backup with iTunes on your computer?

  Are you also the timing or the iCloud backup device?

• "Backup failed" notification on Palm Pre

  I just received a notification on my phone that says "backup failed." I typed it, and he opened a message that says that my phone has not been saved since February 2, 2010. He then suggests that I press a 'Back Up Now' button that appears. I press it, and the phone just hangs. How can I get my pre back up successfully once again? I can't afford to lose my contacts in my business, and I hear, it's the "end game" for the same problem... all disappear one day.

  Help!

  You are right. Disabling backup removes only the data from the server of Palm, all data on the device will be intact.

  Re-activation backup will create a fresh new copy of the backup on the server.

• Time Machine don't prune the old El Capitan backups and works out of space and "backup fails.

  With the help of El Capitan 10.11.1, I noticed a change in behavior with the handling of the time Machine of large files, specifically the files of virtual disk VMWare Fusion (about 50 large concerts).  After a few weeks of use of fusion VM virtual machine, Time Machine gives an error where it ran out of space and "backup failed."

  I had the same problem occur on a second iMac that I own.

  I reformatted my external drive for Time Machine and started fresh, but after a few weeks, I got the same error again.  It seems that Time Machine is not the size or remove older backups of VMware virtual disk to provide a space for the new.

  Previous versions of Mac OS X and Time Machine had no problem with the backup of large files such as these.

  Has anyone else noticed "backup failed" message with Time Machine on El Capitan?  I know that I can exclude the disk virtual VMware backup, but that defeats the entire purpose of Time Machine backups.  Any suggestions?

  Time Machine automatically deletes older snapshots to make room for the new. If your backup history is shorter than expected, it may be because you want to save one or more large files frequently.

  Software virtualization VMware, Parallels or VirtualBox creates a large virtual disk container that is constantly evolving. It will not be saved at all while the virtual machine running, and at other times it must be saved each Time Machine performance. Who fills up quickly any backup destination.

  You must exclude files from virtual drive of your Time Machine backups. To do this, click the Options button in the Time Machine preferences window. You can also do this to virtualization, application settings. Back up the files on the virtual disk within the comments system, using a native backup application.

  A compromise solution is to create a 'snapshot' of the virtual machine in the virtualization software (not a Time Machine snapshot.) This will give you a single large file that never changes and only has to be saved once. All future changes will be stored in a file that is much smaller initially, but will grow over time. You must always exclude this backup TM file. If you need to restore the computer virtual of Time Machine, you will have a working configuration, which will be easy for you to restore the rest of the data in the system of comments.

  See also this page of Parallels support.

• "phone call from Ms. license has expired"

  Three days ago, that I've upgraded to Win10. This may or may not affect the following.

  Today, I received the following message on my voice mail:

  "1-877-236-0793 it is an emergency call to warn you that your Microsoft Windows license key has expired.". To renew the license key please call toll free 1-877-236-0793. »

  I called the number and a guy tech with a very thick Indian accent. He directed me to 'WWW.support18.com '.

  He began to guide me through the screens, including the "run..." command

  I hung up on him.

  Someone at - it happen?

  Hello

  It's a scam.

  This is the notice given to any person who has phone calls like this on Malware, license expiration, etc..

  We have all the errors and warnings in our Event Viewer, which is another ploy they use to scare you

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You are the only person who knows if you gave them remote access.

  If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Report phone scams

  • Help Microsoft to stop cybercriminals in reporting of theinformation about your scam phone.

  • In the United States, use the form of complaint to FTC Assistant.

  • In Canada, the Canadian Centre for fight against fraud can support.

  • In the United Kingdom, you can report the fraud as well as the unsolicited calls.

  See you soon.

• Backup fails and imprisons the DVD + R in machine

  Please accept my apologies if this is a dumb question with an easy answer.

  I tried to run backup on HP G61-110SE (64-bit Edition Windows 7 Home Premium) that I bought a couple of weeks. I insert the DVD and let it roll. Backup goes to about 50% (over a period of what this is between 3 and 24 hours) then either hangs or advises the backup failed or the drive is faulty somehow and I need to insert another disc. At this point, I try to eject the disc (and we tried to push the button to insert a needle) and he refuses to eject. He even lets me know that he has failed to eject most of the time, but I tend to have already achieved it.

  I need to stop the laptop and eject while it is booting. This means that I have to cancel the backup and still failed to create. Backup restore & does not recognize a flash drive as available on DVD/CD alternative. A few times I even had to pull on the plug, remove the battery, leave it for a few minutes and turn (as they said of working when HP of the work cell phone froze at startup).

  I don't think I'm stupid, but my question is, I'm a fool for trying to use DVD + R or is there something more fundamentally wrong? All I want to do is create a set of backup disks!

  Help, please

  OK everybody! Problem solved.

  Not sure that the following items, which did the trick but I would go with the last of them;

  1. the audio and video dvd which worked well, then tried to backup Sony DVD + R again and it didn't burn. Then,.

  2 disabled Norton, disconnected from all internet and associated devices, ran to the backup for about 24 hours on a DVD + RW Verbatim and it hung at 61% and wouldn't release the drive. Then,.

  3. put the ball across the screen, took the phone upstairs and threw it out the window of the bedroom. Allow the dog to throw it in the garden for 15 minutes. He dropped out of the mouth of dogs, has been replaced power cord, put another ball by keyboard for good measure. Tried to launch backup and it failed. Finally,.

  4 bought some Sony DVD-R. Disabled Norton, etc., ran backup and it worked!

  My conclusion is that, after crossing a cake about 12 25 TDK DVD + R Sony DVD + R, 6 TDK DVD + RW and 1 Verbatim DVD + RW, it is perhaps that DVD-R is the format of the disc to go.

  P.S. If someone from Microsoft or HP is reading this, it might be interesting to convey this to new purchser of your products and the authors of manuals / "help" topics If anyone from Sony is reading this, I will gladly accept a gift of a cake of replacement of DVD + R for free advertising. If anyone from TDK is reading this... Sorry, do not use your brand again. No logical reason.