Backup of firepower of managed devices

Similar Questions

• Power of fire effect registration of managed devices Management Center?

  Hello

  I have a solution that was rolled out with an incorrect hostname of the Manager of FMC on each managed SFR.

  When you do a show module sfr, I get the correct ip address for CME.

  First question :

  1 / is the name of the CMF locally on each managed SFR arbitrary? My ASA see the output reveals that the LICO sees the correct ip address for our CME. But our SFR currently has a host name incorrect due to an incorrect/old dns at configuration time record

  For example

  ASA CLI

  View details of sfr module

  
  Addr DC: X.X.X.X (ip address)

  connected to the sfr module

  console session sfr

  > Display managers
  Type: Manager
  Host: incorrect.name.com (which is no longer corresponds to the IP above)
  Inscription: finished

  Second Question

  Can I change the hostname of a CME without registration of effect to all managed devices or the SSL certificate? The company wants to use firepower.internal.different.com

  For example,.

  CMF hostname is currently

  Firepower.Name.com

  DNS for its ip address is now

  Firepower.Internal.different.com

  The SSL certificate currently refers to CN of firepower

  You can change the host name by using the following command: -.

  > set up network hostname ABCDEF

  Its best to re-register the device once more. When you save the unit, it will automatically create a UUID between the Firesight and firepower to keep the communication channel. In your case if the UUID is the host name and you change the host name after registration of the device then it can lead to problems of connectivity communication channel.

• BlackBerry Smartphones copy book coordinated Manager device/desktop dead?

  Hello. Recently, my Pearl 8100 went swimming with me and drowned. Before his death, I backup data via Desktop Manager. The device has now been replaced by a Pearl 8110. I am now trying to import the previous addresses/contacts address which is held on the 8100 via the Desktop Manager but can't seem to find them. I don't have have the 8100, but hoped there is a way to recover my address book/contacts via desktop manager or other files in my PC, I better start typing...

  Thanks in advance.

  The backup, you say you have run would have created, somewhere on your PC hard drive an ipd file... Search your entire hard drive for *.ipd. Review results (date/time) and then use one of the people as a source for the process of restoration in DTM.

• All deauthorise & manage devices

  Hello

  After a clean install of Windows my PC appears twice in "manage devices". I can't delete the old one (button remove grayed out because the unit has signed in the last 30 days).

  I thought 'Deauthorise All' could solve the problem, so I clicked on it... the message of not being able to deauthorise within 90 days appeared so I guess it exercise was carried out... but all my PC's are always in the "device management".

  Must "Deauthorise All" withdrew all PC to "Manage devices" or are these separate things?

  Thanks in advance,

  SJW

  These are different things. Authorization/deauthorising only applies to iTunes on the computer and an account may be authorized to the maximum of 5 computers at a time-, there is no time limit to allow/deauthorising of individual computers, you can do it as often as you want ("deauthorise all" cannot be done once every 12 months). Allowing you to play this content of accounts and synchronize on iPods and iOS devices.

  Devices of management section lists the computers or devices that are associated with an account for example by redownloading past purchases on them, to aid automatic downloads, iTunes game: view and delete associated devices in iTunes - Apple Support

  Once associated, you cannot remove the link until 90 days have passed (I believe it's an attempt to try to stop people by logging into their account on other computers, and redownloading people and sharing of purchases).

  You can have a total of 10 devices/computers associated with an account, but as a computer must also be allowed until he could become associated, at least 5 of the 10 can be computers.

• Backup and HP Recovery Manager General Questions

  I made a series of restore DVD using backup and HP Recovery Manager hear are several questions I have.

  If the restore on my hard drive partition is deleted can always restore from the DVD I made?

  I am upgrading to Windows 7 will soon be the Recovery Manager always be available for use?

  Thanks, Rich614

  richie614 wrote:
  

  I made a series of restore DVD using backup and HP Recovery Manager hear are several questions I have.

  If the restore on my hard drive partition is deleted can always restore from the DVD I made?

  I am upgrading to Windows 7 will soon be the Recovery Manager always be available for use?

  Thanks, Rich614

  Rich, Yes, the DVD can take the place of the partition.  However, I would test to ensure that they work properly before you delete the partition of the DVD.

  Yes, however, it will restore your computer to its original state.  This means that you will no longer Win 7, but programs and original OS.

• R7500 Dynamic DNS - no ip - manage devices

  Hello

  I had set up dynamic DNS using no. - ip (NETGEAR supplier - "*.") mynetgear.com') on my router R7000, before.

  Now, I changed to a R7500.

  But my noip.com account still has the 'old' R7000 device under host / redirects-> manage devices.

  And I can't seem to remove the R7000 and serial number. (and I don't have the R7000 no more).

  The R7500 refused to apply the account settings for:

  Service provider: NETGEAR

  E-mail:

  Password:

  without any error message.

  I missed something?

  Thank you

  Hello

  I can't remove the R7000 go in my list of devices (or at least, I can't find a delete option).

  BUT after removing the hostname of my old camera AND delete the full host name subsequently (on noip.com), I could re-register the R7500 with my host name. So ultimately it works again!

  Noip.com, on the R7000 is more listed as acive device, but it seems that I can't delete the old of my list.

• nVidia graphics disappeard Manager devices, unable to re - install the driver.

  Three days earlier, when I start my computer it didn't detec my offboard nVidia card (detected only my onboard Intel graphics card). When I tried to re - install the nVidia Driver, I get the error: "this graphics driver cannot find compatible graphics hardware.

  I browsed the community and found someone who had a similar problem (http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/nvidia-graphic-card-does-not-show-up-in-device/d773c616-7767-47c0-94be-b35d77727941)

  So I tried the following:

  -------------------------------------------------------------------------

  Method 1:

  First of all, I suggest you to run the following Microsoft Fixit to get the problem automatically detected and corrected. This fixit checks if the device is currently disabled or turned off or the driver is not installed.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  Sometimes, some devices in Device Manager are hidden by corrupt or missing drivers.

  Follow the steps below to view devices hidden in the device manager and troubleshoot accordingly.

  1. Press the Windows key + X
  2. Select prompt (Admin)
  3. Type set devmgr_show_nonpresent_devices = 1 and press enter
  4. Type Start DEVMGMT. SMC and press ENTER.
  5. Once in Device Manager hit the view menu and select Show hidden devices.

  From there, remove every instance of the Nvidia card you see as well as each unknown device. Quit Device Manager and reinstall the latest you can find for your graphics card drivers.

  After installing the drivers, reboot and see if you get different results.

  ----------------------------------------------------------------------------------------

  I haven't worked out, so I updated my BIOS, re-installed all the drivers of my motherboard and the problem is still...

  I have a motherboard Intel DH55HC Hunter Cove, I have not any material changes before the problem and the graphics card cooler works great when the PC is turned on.

  Can someone help me please?

  

  So three years ago, you didn't do no software changes is? Not the new drivers and Windows updates?

  The Nvidia gpu, btw?

  -If the machine has been moved or struck some dust may have got into the PCIe slot.

  With the machine unplugged, remove the card, clean the slot with a small brush and reposition the map.

  and the power/s connector.

  -Do you have a System Restore Point that dates back to before that you had first of all the problem?

  If so, do a restore at this time there can help, if the card is not failing.

  -Try the card in another machine, or another card in your machine, would also help determine

  If the card is faulty.

  -I think that the Nvidia card should show in Manager devices without worrying, but after the BIOS update

  have you checked in the BIOS to check graphics Nvidia isn't somehow it disabled?

  EDIT: After looking at the other thread, I see you have uninstalled and reinstalled the

  NVIDIA drivers already-

  -Drivers Nvidia graphics and components (PhysX, etc.) still listed in programs and features?

  If so, try to uninstall, reboot, and reinstall this driver

  (If you did not remove the Nvidia folder in C:\ you can reinstall the drivers from there.

  It is there that the installer download you "unpacks" the files before installing).

  .

• TMSPE and directly managed device

  Hello

  If we have a TP network with the following

  -SX20 5

  -C60 2

  -MX300 1

  -100 users (Jabber video)

  -5 EX90

  -1 control of VCS

  -MCU 1

  -1 VCS Expressway

  -MSD 1

  I know that, in order to manage devices, to add ICA-TMS-25 (we have more than 10 devices).

  But what is the advantage of buying LIC-TMS-PE-XX.

  Thank you for your help

  Best regards

  Salim

  The LIC-TMS-PE-25 would be for 25 aircraft in service. You want to ICA-TMS-25 for 25 additional systems for TMS to manage.

• Alerts when a managed device is in offline mode?

  OME can be configured to send an alert message when a managed device is offline for a period of time or number of attempts to vote?

  We have branches who have lost the power of building recently and we would like to be alerted when these managed servers are offline.

  Thank you

  Brent

  Hi Brent,

  When OME is not able to reach a server in the status survey, OME automatically generates an internal alert to say that the system is broken. All you have to do is to go to the preferences page > parameters alerts and make sure that enable state alert internal connection. Point to note, it is enabled by default.

• BlackBerry Smartphones and Desktop Manager Device Manager

  I'm confused. Is there a BlackBerry Desktop Manager and BlackBerry Device Manager? I have always used the BB Desktop Manager when I can't get a client device to synchronize properly by enabling wireless. So, what is the difference and where can I get the Device Manager?

  you have a desktop software package that includes:

  • Device Manager (for tethering for example)
  • Pack Desktop Manager

  the Desktop Manager pack contains:

  • BlackBerry Desktop Manager only
  • Roxio Media Player (optional)
  • BlackBerry Media Sync (optional)

  the BlackBerry Desktop Manager includes:

  • a module of configuration BES or BIS (but not both)
  • a module to synchronize databases with a PIM desktop like Microsoft Outlook or IBM Lotus Notes (contacts, tasks, calendar)
  • backup / restore of module
  • an Application Loader module (which acts both as an installer of the OS and a theme/app Installer)

  on top of all that you have drivers USB BlackBerry for BlackBerry devices.

• Basic and unknown system in Device Manager device

  Hello!!

  (Everyone here is awesome btw... thank you so much for the help!)

  I have two unknowns in the Device Manager.

  Base system device

  PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C & REV_30

  PCI\VEN_197B & DEV_2392 & SUBSYS_161C103C

  PCI\VEN_197B & DEV_2392 & CC_088000

  PCI\VEN_197B & DEV_2392 & CC_0880

  and...

  Unknown device

  ACPI\HPQ0004

  * HPQ0004

  Thank you very much... again!

  EDIT: I forgot to mention that it's for Windows 7... but I need for the x 86 and x 64...

  Hello:

  These devices need card reader driver (base system) and drivers of HP 3D driveguard.

• No, I don't have Photos to open for each managed device iOS

  I have recently updated our administrative MacBook with OS X 10.11.2 iPad. I use it to manage all of our devices with Configurator. Whenever one of the devices is wiped and restored, Photos automatically opens. Even if I uncheck the Image Capture for the iOS device it reappears after restoration.

  If you manage a large number of iOS devices it becomes FRUSTRATING to NO END.

  Is it possible to disable the application pictures to launch automatically at all times?

  Only one by one while they are connected to unchecking the checkbox to open the Photos when the unit is plugged

  Apple certainly needs remedy to this - say - http://www.apple.com/feedback/photos.html

  Someone posted a hack just now - no idea if it works or is safe (probably) has gone after each update of the OS - if you are looking for Photos for Mac Ant that's where

  LN

• Backup and HP Recovery Manager for Windows 7

  I installed all the software and drivers that came with the HP upgrade DVD. But, I found that the Backup and Recovery Manager missing on DVD. Is there a Backup and Recovery Manager for Win 7? I liked the manager backup and restore that was available on my Vista, when I bought this laptop, but is currently unavailable due to upgrade! All the solutions for this? I don't want to use the default Windows Backup that I don't have a separate HARD disk for the time to store the backup here and do not want to fill up my hard drive with data backup! Thank you.

  Ok thank you. I have my recovery partition intact Vista. So I think, I should be able to recover if I have some kind of problem! I was able to find a backup and recover in Win 7 itself. Maybe I should wait for the software will be released by HP. Thank you once again!

• need to find the Manager device in my laptop,

  I need to find a driver through the Device Manager, but dm nowhere is dor: to install a driver in my phone Android mobile phone.

  Make a right click my computer, and then click Properties.  Then click on Device Manager.

  I hope this helps.  Good luck.

• X 230 win 8.1 power management device driver problem

  Hello

  Cool win 8 build in place upgrade to 8.1. Then all the tools Lenovo update and latest Lenovo compatibility package installed.

  This device is not properly detected. I think it's a driver problem Power Manager (based on an old post with the same problem, but no resolution posted).

  Lenovo X 230

  Type: 2330-A59

  Device instance path: ACPI\LEN0078\5 & 2890D 699 & 0

  Location: On the controller shipped compatible ACPI Microsoft

  I tried the typical removal of the device and re - run the PM (Lenovo.com last) driver installation package. No change. The device is listed back in the device as an "Unknown" Device Manager

  Everyone there knows the solution? I hope it's something that I'm a little more research.

  JIM

  Found the answer. It is NOT the PM Driver.

  Lenovo HID HW Radio Driver for Windows 8.1 (32-bit, 64-bit), 8 (32-bit, 64-bit) - ThinkPad ... Learn more