backup on each file stops at 50% precislely
Hello
whenever I try to do a backup of companion Sony or directly from the phone it stops suddenly.
When I do it from the phone with backup on SD card, all the files stopped at 50%, no 50.2 or 50.9, all files are at 50% and nothing happen after.
If anyone can help.
Thank you
Hello body,.
thx a lot I did this iworks then once and then I did a full backup and it worked also perfectly... do not understand why, but... Thank you!!
Tags: Sony Phones
Similar Questions
-
Windows Media Player 11 Date added function - please stop repeating the date for EACH file.
I have been using Media Player 9, decided to upgrade to Windows Media Player 11, and the only thing I can not stand on Player 11 is how it sorts Date added media files. In Player 9 when I chose the column Date added, the program would list all the files on a given under a SINGLE date. With Windows Media Player 11 it lists EACH file with a date so that instead of see Tuesday, December 14, 2010 once and then listing all of the files under it, I see Tuesday, December 14, 2010 about twenty times. I download podcasts once a week and dump it on my phone, but it's a worry now. Is it possible to stop Windows Media Player 11 to repeat the date again and again and force him to the date that the list only once? Think back to Player 9. Alex
Hi Alex103,
It's design in Windows media player 11 and it is also included in Windows Media player 12.
However, you can uncheck this option, follow the steps below:
a. open windows Media player
b. right-click on one of the sorted column
c. click Choose column
d. uncheck data added
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I created several burn (.fpbf) files that are sitting on my desktop. I want to burn these file separated into one cd. At present each file burn requires a blank cd. Is there a way to turn it?
Hey Bob79,
Being able to burn a lot of files on a disk is a great feature of backup files and carry them.
This article goes over how to burn items to a disc: OS X El Capitan: create and use a folder to burn
The way it is configured in OS X El Capitan you can burn only 1 file to burn to a disc and not multiple.
If you want to burn all the evidence of burning I suggest make a new folder to burn with all the elements that it.
You should get the drive you want.
See you soon
-
When I download (save a file) where is she going? Why can't directly where I want to go? IE allows me to choose where I save each file to
You set downloads to always go to a folder or to ask you every time.
- Options > general > downloads section
- ' Save files to: "and choose a folder (always stops in this case) {This is the default setting for Firefox, you can change the folder or move in" always ask me... "} {"below}
- "Always ask me where to save files.
- See-> window Options - general Board
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
- Options > general > downloads section
-
Hi windows mail open only 1 email from each file, i.e. Inbox, junk, sent mail, all of these files. summer's fine for 3 years. Show msgs is checked.i can see in the properties of the Inbox I have 70 messages they are there but only 1 will open I see msgs in orange webmail, they say no problem for this purpose. I can also see them in users email location.worried man help
Assuming that it is an email account POP3, go to the message store and see if the messages are really there. They must be located under the directories for the folder names under the main directory of local folders in the message store. The store is located under the Users\ [username] \AppData\Local\Microsoft\Windows Mail\ directory and is hidden, so first go to control panel | Folder options | View and uncheck Hide extensions of known file types (so you can distinguish the eml files which are messages) and check the option to show the hidden files and folders. Then you can see if the messages are in fact always there or missing. See here for background: www.oehelp.com/backup.aspx#wm and also here for what may have caused it: www.oehelp.com/OETips.aspx#3 as Bruce stated, if the messages are still on the server, you can set up your account again and then download them again.
Steve
-
Original title: history of Falie Worng Destination path
I changed my computer name [my computer setting and the name, display name, computer and computer Description all equal under the same name]. But when the history of files backing up my files, he insists on putting the OLD computer name in the backup destination path, for example:
Backup_Drive\\Backup_Folder_A\UserID\Old_Computer_Name\Data...
I tried selecting a new backup drive and reboot several times, but the history of files always comes back to the old name of the computer when you create the destination path.
How can I fix?
Similar to the response of Siva here, you will want to return to
C:\Users\
\AppData\Local\Microsoft\Windows\FileHistory Now, if FileHistory was lit before, using the old username, there will be a configuration file and the Config1.xml and Config2.xml files will contain several tags using the old name of PC. Rather than wipe these files, open each file in Notepad and search for the name of your old PC and replace with the name of the new, do not forget to save.
In addition, if you want to keep a backup that has already been created with the old name of PC, you'll need to find, rename the main folder ("old name PC") and in this folder, rename tags in the Web configuration files (as you did in the local configuration files).
When I tried to delete my local config files, he would recreate using files of configuration of the backup, that were also incorrect, so I just manually renamed and mine works fine now under the new name of PC.
-
I use MacBook Pro mid 2012, latest OSX and Word 2016, 15.24, cloud of Document Adobe version 2015:010:20056
Architecture: x86_64
Build: 15.10.20056.167417
AGA: 4.30.61
CoolType: 5.14.5
JP2K: 1.2.2.35592
I'm trying to combine files, dragged two files word to combine-window, hit button combine and acrobats starting word to pdf conversion... but every time process stops due to the need to Word more than access to the files... I have to select each file again from the server to the conversion process... will this security? check for each document means a lot of extra work.
Especially since I've made a few changes in the settings - the path of the server and the research should be trusted in the earlier version, it was possible to drag wordfiles to combine-window, hitting a button combines and conversion started in automatic.
Since I combine the files several times a day, it's really annoying... How can I get rid of document access-windows in secure servers? I already tried to define the servers/search path as "Approved" in DC
/ Nils
Hi Nils,
It seems that this may be the known problem of Microsoft Office: grant access File: cannot open the document: user - Microsoft Community
Have you checked with Microsoft on this issue?
Kind regards
Tariq Dar.
-
PDFMaker, Options, create PDF/A-1 a in Word. Where can I change the setting so I did not check the box for each file, I create?
Win OS: Windows 7
Acrobat 9 Pro
Hello
You can do this to change the registry settings.
Go to run type Regedit to open it.
First make a backup of the registry.
Here is how do.
Go to HKEY_CURRENT_USER > software > Adobe > Acrobat > PDFMaker 9.0 > > Word > settings
You need to change the DWORD values & chain listed below.
Chain: JobOptions
Value: PDFA1b 2005 RGB
DWORD: PDFComplianceIndex
Value: 1
DWORD: PDFComplianceLevel
Value: 1
Close the registry editor
Thank you
Abhishek
-
ORA-00245: backup of control file failed; target is likely on a local file sys
Hello
our CARS (Linux 11.2.0.3.0) is relatively new and we are still on the acquisition of experiences with this system...
At the start of the backup with RMAN, we get the following error:
From control file and SPFILE Autobackup 4 July 12
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03009: failure of command of file control and SPFILE Autobackup on channel ORA_DISK_1 at 04/07/2012 16:41:48
ORA-00245: backup of control file failed; target is likely on a local file system
The reason for the error is clear ORA-00245 - in a CCR environment, the snapshot Controlfile location must be on a shared location.
When running the RMAN command "show all" on each node, we get
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/app/oracle/product/11.2.0.3/db/dbs/snapcf_PROD021.f'; # by default
for the #1 node
and
CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/app/oracle/product/11.2.0.3/db/dbs/snapcf_PROD022.f'; # by default
for the #2 node
When using a shared location for the snapshot Controlfile make us still need 2 different names for this configuration file?
CONFIGURE SNAPSHOT CONTROLFILE NAME to ' / < shared location > / snapcf_PROD021.f'; # by default
for the #1 node and
CONFIGURE SNAPSHOT CONTROLFILE NAME to ' / < shared location > / snapcf_PROD022.f'; # by default
for the #2 node
Or should set us up as a single snapshot Controlfile?
RMAN installation for "CONFIGURE SNAPSHOT CONTROLFILE NAME TO... "must be changed on both nodes - correct?
I hope my question is clear enough--any help will be appreciated.
Rgds
JH
Published by: VivaLaVida on 05.07.2012 11:41The controlfile is shared on the RAC database and having the backup of any node to shared mount point would meet the requirement.
Configure snapshot controlfile name to ' /
snapcf_PROD0.f'; Anand
-
What is the role of the archived in an incremental backup redo log files?
I want to know, to which RMAN reads what block of data is changed after the last incremental backup.
and what is the role of the archived in an incremental backup redo log files?
Please guide.Hello
First Querstion response->
Each block of data in a data file contains a system change number (SCN), which is the SCN of the last change to the block. During an incremental backup, RMAN reads the RCS of each block of data in the input file and compares at the checkpoint SCN of the incremental backup from parent. If the RCS in the block of input data is greater than or equal to checkpoint SCN of the parent, then RMAN copies the block.2 - the archived redolog files are required for the restoration of the online of rman incremental backup in a consistent state.
Thank you & best regards
Rahul Sharma -
A question about the restoration of cold backup (backup of control file is not clear)
Hello
I had another question about restoring from backup to cold. My database is in noarchivelog mode and after that take a consistent backup of cold, all I have to do is restore the backup right? -Why I got this question is because: when I save my control to trace file, I see statements like this: -.
-Orders to recreate the table of the incarnation
-Under journal names MUST be replaced by names of existing files
-disc. The log files from each branch can be used for
-re - create the folders of the incarnation.
-LOGFILE of REGISTRY ALTER DATABASE ' / uo1/app1/arch1_1_647102958.dbf';
-Recovery is required if any of the data files are restored backups.
- or if the last shutdown was not normal or immediate.
RECOVER THE DATABASE
-Database can now be opened normally.
ALTER DATABASE OPEN;
-----
My database is in noarchivelog mode now so don't know why these statements (of the registry the logfile) is there in the backup of the control file? so when I restore the cold backup of this database, it will still work OK? (there is no log file I only have the CRD files in cold don't backup - no log file archive.)
Thank you
CedricIt is a generic message in trace control file. It's not affect you.
-
I'm trying to import and backup/restore/Choose file... / after backup correctly and I see the file, but there is no JSON extension. What can I do?
I backed up my favorites using 'import and backup/Backup' on an external HD, installed Windows 10 and went to restore my bookmarks and noticed the file named "Firefox bookmarks-2015-09-04"had no extension and does not work."
Please advise! Thank you! Sincerely, s
If you add the .json extension, it works then? Why people who design browsers or extensions them do create files with no extension name, in spite that these extension names are essential to make the files can be restored? I could never understand that.
-
I want to spend a lot of photos (they are in order) but and do not want to have to click to move each photo. I know there is a simple control function that allows to select groups of files with ' two'clicks ', as opposed to the selection of each file. Suggestions? I know it's apple 101, but I don't remember what order to press the button command, or shift, or other. Thank you
Select the first file, then hold down the SHIFT key, and then click the last file. Or, select any file in the folder and then press command + A
-
External hard drive does not allow me to backup large video files
Hi - I wonder if anyone can tell me why the Toshiba 1 TB 3.5 "external hard drive I recently bought does not allow me to backup large video files from my PC.
The files are located in the region of 5 to 10 GB and when I try to save these I get the message that they are too big for the destination.Any help would be appreciated. Thank you.
Do you want to just copy/move these files from your PC to the external HARD drive?
-
Why the Pages go through each file before opening one I clicked on that?
When I click on a file I want in the Pages, the program passes through each file that I created before he gets to the one I want. Is it possible to go directly to the file you want?
Open the Pages with the SHIFT key is pressed, so it is not reopen previously open documents or close all your open documents before leaving the Pages.
Peter
Maybe you are looking for
-
The wireless on this laptop works on 5 GHz?
-
How to reinstall the Miniport Tun Microsof card on laptop?
In Device Manager I uninstall the device and now I need to reinstall the device
-
HP with drive Sd Vista stopped working
My SD card reader stopped working. Whenever I try to use a message informs you that I need to format the drive f until I can use it. This drive was working fine until now. I tried two different cards with the same results. Model name Product number K
-
Attempt to synchronize iPod and nothing is synchronization
-
In any a MP4 video in my presentation. When I preview the it, the video is automatically (in addition to my narration). How can I set the video to play after my narrative?