Backup ScanDisk Ultra 64

Similar Questions

• Re: Camileo S10 - very slow when the SD card is in.

  My Camileo S10 was working fine for months with my 8 GB ScanDisk Ultra II memory card.
  Now, when I start the camera, it is very slow to start and operate (a few second delay for each operations).

  When I remove the card SD and trun on the camera, it works fine.

  Is this a known issue?
  An idea for me?

  Thank you.

  Hello

  For me, it looks like a problem with the SD card inserted.
  I think you should try to format the card CD and it should check again.
  If this will not help and you won't see a performance improvement you should replace the SD card and should try another.

  Welcome them

• SD card to Clip Zip?

  Hi all

  I'm new to the forum so please excuse my ignorance.

  Already, I have a 4G & 8 G Fuze (original version) and am ready to order a ClipZip G 4 after reviewing the xcomments here.  I want also to buy an SD card with the ClipZip that we hope will work on my other rockets, but does not know who's in charge.  I saw something about 16G max recommended by Sansa? (I use the players well enough for audio books).

  I see the 16G and 32 G Scandisk Ultra Micro SD cards on Amazon and they come with an adapter.  What should I order?

  Not sure that the drill is, but I have that reason to suppose that the adapter is to connect the card on a computer, but the card fits directly into the "rocket"?

  I also assume that you download a digital audio book to your computer, using Overdrive Media Console 'transfer it"la carte which in turn, is connected to the drive?

  Thank you for advice or explanations,

  Skipjack

  Of course, 18 was a typo, and as I said, my info came from the manufacturer.

  I ordered the 16 G Level 4, which is more that enough space for audio books, I'll be uploading. Between my 4G and 8G rockets, 2 iPod nano, more a Shuffe G 1 exercise music I'm not likely to run out of space.

  My problem is that iPods are really ugly audio books - you can't tell where you are and if you lose your place, it can take forever to find him.  It's worse on the 6th generation 4th and two are hard to cue with overly sensitive controls.

• How can I reformat a media card

  I have a ScanDisk Ultra II, when I put it in my hp731oxi, I get a memory card error error message?

  Hello

  If you want to reuse the card on your printer, my suggestion:

  • copy all photos to a computer,
  • the camera allows you to format the card,
  • Take some pictures and put it again to the printer

  If this is not the case, ok, then try another card, always not ok this means certainly something is not fair to the reader on the printer.

  Kind regards.

• BlackBerry SD card recognized but impossible to access passport

  Hi all

  I like my passport because I got it in November.

  But yesterday, all of a sudden, I couldn't access my SD card anymore, since the Manager files or music App...

  In the settings, it is well recognized (it shows me the space remaining and all) and the card works fine on my previous BB, this Passport yesterday Z10 and another device, a Samsung tablet.

  I don't download or move anything for several days.

  I tried to remove it, replace, restart Phone several times, nothing works...

  When I put it in the phone, it tells me that a card is inserted.

  My passport: SQW100-1

  My SD card: ScanDisk Ultra / 64GB adapters

  Anyone know what to do?

  Best,

  Robin

  And reformatting my card works, everything back to normal.

  But still do not know why it suddenly stop working...

• best memory card for cyber-shot

  Hello, I have just my first Sony Cyber-Shot today. I bought the memory card, see you at work: ScanDisk Ultra Plus, 64GB, speed up to 40 MB

  Anyone have a good recommendation for this carmera? My thanks, frustrated new owner

  Wait... you said "doesn't work", which means that it works?
  I don't see where the problem is whether you are owner of a new cause frustration.

  If the problem is more so relating to the speed of memory card, as I understand it, the faster cards that Sony cameras can take are the ones 95 MB/s. All the works faster, but it's not really a difference. 95 MB/s is simply the CAP.

  I remember someone test cards to 95 MB/s and faster, the difference was minimal strip - the conclusion was that 95 MB/s is on it.

• Memorex Ultra speed Hi-Speed USB CD BurnerMemorex Ultra speed Hi-Speed USB CD Burner can I store files of backup on it

  Hi-Speed USB-CD-Burner can Memorex Ultra speed I store files of backup on it

  Hello Chris,

  While there is no reason why you can't burn files to your CD burner for backup, most people use an external hard drive and backup Windows for this purpose.

  The reason behind this, I think, is that CD can get scratches and become unreadable, while external hard drives are more resistant.

  If the answer is "Yes you can", but there are other methods that others use.

  Let us know if that helps.

  Best regards

  Matthew_Ha

• Ultra Backup 64 GB: how to restore files on a public computer?

  Hello

  I recently bought a Sandisk Ultra Backup flash with a capacity of 64 GB drive.

  U3 removed, the software installed on my PC - everything worked well.

  Now, if I come to a public computer with my USB key, I can not install the backup software.

  So, how can I access my sustained upward, protected by password data stored on the Flash DRIVE on a computer that does not have the Sandisk backup software?

  Thank you very much

  James

  you need not reinstall u3. There is a standalone version of the backup software that you install on the usb drive. If that's what you've done all you need to do is open the USB on the public computer, and run the backup software. Then, you will have access to all your files. don't forget the stand alone software is installed to the usb port doesn't drive not computer.

  Here is the article from the knowledge base with the software and installation instructions.

  http://KB.SanDisk.com/app/answers/detail/A_ID/5206/kW/ultra%20backup%20SOFTWARE/r_id/101834

• SanDisk Ultra Backup 8 GB USB unable to view copied files unless the originals are still on the PC HARD drive?

  This could be me be stupid... but please humor if I am because I'm not supertechie - but I'm backup me of my hard drive on the SanDisk Ultra Backup USB drive using "SanDisk Backup" - if I leave the copies of the files on my disk hard original PC (the folder I'm backup of) I am able to view the files on the Flash drive.  If I delete the original files from the PC, I only have the ability to restore files from the USB Flash drive?

  The question of having an external device is to take the PC files and use elsewhere?  Is it possible to display the files on the USB key that you need to keep the original files on your PC?

  I'm sorry, you say SecureAccess MANAGER is part of your startup not SecureAccess.  The Manager is used for autostart SecureAccess on the USB drive when it is plugged.

  http://KB.SanDisk.com/app/answers/detail/A_ID/5222/session/L2F2LzEvdGltZS8xMzY3MTg1ODI3L3NpZC9CalFGc...

  Sorry, he is not clicked when I read it.

• Re-install the Ultra Manager backup-16 G flash drive

  long story short.

  Had a problem with my new 16G flash and finished last week by having to redeem another.  Kept asking me to format the drive when I tried to access it, it was after I got 12 GB of data on it.

  So, got my new and immediately put in shape, why, cause, I didn't want the same problem.  Well, I deleted the backup out of there Manager.  Where can I download this nice piece of software?

  Thanks in advance guys

  Dennis

  Oxford, AL

  NM.

  Here ya go for those who have the same problem:

  http://KB.SanDisk.com/app/answers/detail/A_ID/5206/kW/SanDisk%20Back%20up/r_id/101834

• Zoom TAC2R or other fast ultra interface boards

  Hi all

  My rig software concert revolves around MainStage running on a MacBook Pro 15 "and MOTU Ultralite MK3 interface audio (FireWire only) and I am very happy with it. However, I try to have a second, smaller, ultra portable configuration that I can just throw in a backpack for small gigs I need just my AMT sax clip microphone (using its wired configuration) and the Yamaha WX5 wind controller. For my proposed Setup, I'll only need 2 x e/s with MIDI I/o (although more is always nice!) and it must be a unit completely powered by the bus. I am impressed by what I saw of the Zoom TAC2R in terms of price, I/O + MIDI, is the Thunderbolt connectivity (must be pleasant and reliable with very low latency) and bus power but would appreciate the thoughts of someone who has used this device, or can you recommend something similar for my budget and requirements. I can get the TAC2R because THE $ 398 delivered, and it's really not cheap here in Australia. My ideal unit would be RME or AU, but I can't justify the expense for a backup system that I will not use it all the time. My primary rig has micro system wireless and wireless in ears, wireless MIDI etc. and it is only a configuration 2RU, there are moments where I would like something smaller and a little more discreet.

  There are a number of interfaces autour in my price range, but my main considerations (other than/o, MIDI, and bus-power) are very low latency, stability of the driver, portability and small physical size. I excluded M-Audio from the beginning because I've heard so many problems with these. I also prefer to stay away from FireWire 400 units because a) FW 400 is now old, and b) I'd rather watch the new connectivity options.  I'm also eager to hear about the quality of the amps before, especially as to whether they are on par with or lower than the MOTU Ultralite.

  Any thoughts?

  See you soon

  Gary

  I am extremely happy with my T4 Audio of resident. This is the thunderbolt and operated bus 4 input/output with midi support $249 here in the United States.

• Z1 HP workstation: C: drive system image backup internal solid state

  My professional job to Z1 HP with Windows 7 has 370 GB used space on the C: drive and 146 GB free.

  I want to copy / clone a 'System Image backup"from my internal C: drive to an external hard drive.

  'WD My Passport Ultra', 1 TB Western Digital.

  I heard that the combination "backup system image" in Windows and target disk Western Digital "WD My Passport Ultra' may be problematic.

  Does anyone have experience with this and y at - there a better alternative?

  An external hard drive with 1 TB of storage space will be "worthy" my 463 GB solid state internal hard drive C:?

  Thanks for the comment.

  steinarV wrote:
  

  My professional job to Z1 HP with Windows 7 has 370 GB used space on the C: drive and 146 GB free.

  I want to copy / clone a 'System Image backup"from my internal C: drive to an external hard drive.

  'WD My Passport Ultra', 1 TB Western Digital.

  (...)

  An external hard drive with 1 TB of storage space will be "worthy" my 463 GB solid state internal hard drive C:?

  Thanks for the comment.

  Hello

  Thanks for posting in the Forum from HP Support.

  Personally, I have not heard of specific issues with this WD HARD drive. I Googled it and found some non-specific stuff.

  However, to answer your question: in my view, there is no problem with the 1 TB external harddrive to adapt the SSD from below 500 GB. Therefore larger than GB 463, less than 500 GB, 1 TB, it should fit without problems. There is no problem for cloning SSD and HARD drive imaging (the only problem is that it might be a bit slower, but no problem to do so).

• When doing a full backup computer falls down and must be closed

  Hello

  When doing a full backup of the computer falls down and must be closed using the power switch, it is very good when you make a partial backup.
  I'm trying to backup to an external hard drive via a usb connection.

  The hard drive is formatted in NTFS
  Someone has any ideas
  Fred

  Hello

  I will try to resume that you issue.
  The HARD disk has several partitions (I guess 2 partitions)
  The backup procedure works fine if you safe data only from single partition, but it crashes if you try to create a backup of all partitions of set. Am I wrong?

  My first question; What backup utility do you use?
  Are you sure that this backup tool supports the backup of the two partitions at the same time?

  I put t know if it will help but a similar problem happened to me.
  I've used Norton ghost and I wasn't able to create a backup of a partition.

  The procedure began, but after several minutes, the screen goes white and the notebook frisottés.
  I ran the scandisk, chkdsk and I defragment the whole HARD drive.

  This helped!

• Hello. I created an image of HD main on a hard drive external drive. It is: HD used 282 GB 320 GB, disk backup image has 251 gb. Is all backed up? Can anyone help on this? Thank you

  Hello. I created a disk image of my mac HD on an external hard drive. It is: my mac HD is used 282 320 GB, backup disk image, I did a 251 gb. Is all backed up? I need to be sure before you reformat the HD and install mac so original. Can anyone help on this? Thank you

  Probably not.

  Need an external hard drive as large or larger than the drive you want to back up.

  You have not said what backup software you are using.

  I use Carbon Copy Cloner by https://bombich.com/ $40.00 there. You can also use Super Duper.

  These two products will make a bootable backup complete or a clone of you existing hard drive, including your recovery partition.

  Once you made the backup, if your hard drive has never been to fail, you could simply start on the external backup drive.

  If you back up because you're upgrading the hard drive for an SSD, you can put the SSD in an external enclosure and clone your drive in the SSD, test it, and then replace the HD when you are confident that it works well.

  P.S. External hard drives are cheap these days. Here is an example: http://www.bestbuy.com/site/wd-my-passport-ultra-1tb-external-usb-3-0-2-0-portab le-hard-drive-classic-black/7869174.p? id...

  Kim

• Backup USB on OS 6.2.4 Ultra6 failure

  I have problems with the backup my Ultra6 via USB on a Seagate external 4 TB USB hard drive, namely:
  

  • To a specific USB port USB backup fails with "Backup: backup error '': destination are not available."
  
  
  • USB ports listed in the drop-down list in the backup configuration include "USB back Top" and "Low rear USB" while the Ultra6 has left rear USB ports and rear right of USB in the back
  
  
  • The USB device has iterrated of USB_HDD_1 through USB_HDD_3 (denial of the backup on the part of the USB solution)

  Logs show that the device is connected to:
  usb_devices
  

  product 2-1 = DISK USB idProduct = 1000 idVendor = 090c = speed 2 = 480 devnum
  2 - 1:1.0
  product 2-2 = Expansion Desk idProduct = 3312 idVendor = 0bc2 devnum = speed 3 = 480
  2 - 2:1.0
  ..
  7 - 0:1.0
  7-1 product = Back-UPS ES 550 G FW:870.O3. I have USB FWidProduct 3 = 0002 idVendor = devnum 051d = 2 speed = 1.5
  7 - 1:1.0
  
  nls_cp437
  
  Devices *.
  / dev/disk/external/3:-1T4000DM000 - 1F2168:Z3017Q3G:480:7814037160->... /... /SDH

  While the work of backup set (in etc/frontview/backup_jobs.conf) (to use USB Back Top, Front USB and USB rear lower):
  

  High USB = dst: [usb:usb_port_3:3].
  The Front USB = dst: [usb:usb_port_3:1].
  USB rear bottom = dst: [usb:usb_port_3:4].

  A someone has encountered this problem and solved? I have plugged in the left return postage and a connected ups on the rear port straight to 4. Nothing is plugged into the port on the front. I have not traded or tested other ports yet but do this weekend.

  Any help would be greatly appreciated.

  For the Ultra 6 port mapping has been added to a future firmware version, but I can not provide ETA right now.