Backup Seagate on 64-bit Windows Vista computer

Similar Questions

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• just formatted my WD my passport ultra 1 TB to my xbox 1. Its now not show on my windows vista computer

  OK, so I just format my WD my passport ultra 1 TB to my xbox 1. Its now not show on my windows vista computer, worked and connected very well before, but now nothing appears. Anything to help. Thank you

  OT:

  Please help with this

  Try this: go to "Start" then go to "Computer" right click on computer and left-click 'manage '.

  This will bring you to the management of the computer. From there, you should see the drive. Try "initialize disk".

  If you are not the "backup operator" or the "Administrator", then go to the control panel - system tools

  -Administrative Tools, then click on "disk management". From there, you can follow these instructions.

  Initialize new disks

  Backup operator or administrator is the minimum number of members required.

  To initialize new disks

  1. In disk management, right-click the disk you want to initialize, and then click Initialize Disk.

  2. In the dialog box initialize the disk , select the disk to initialize. You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  	Note
  	The disk is initialized as a basic disk.

  Additional considerations

  • New disks appear as uninitialized. Before you can use a disk, you must first initialize it. If you start disk management after the addition of a disk, the disk initialization Wizard appears then you can initialize the disk.

• How upgrade 64-bit Windows Vista to Windows 7?

  How upgrade 64-bit Windows Vista to Windows 7?

  Hello

  Microsoft sells more than 7.

  You need to look on Amazon.com, etc..

  Follow these steps before installing Windows 7:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  See you soon.

• After upgrading my Windows Vista computer to SP2 double my user account icons.

  Original title: After upgrading my Windows Vista computer to SP2 double my user account icons. I'm not trying to delete one of them, because all of the account will be deleted.  How can I fix it?

  I use a laptop Lenovo Dual 32-bit CPU. My OS is Windows Vista Business.

  Hello
   
  Where it seems double?
   
   
  Method 1:
  Step 1:
  
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode 
   
  If step 1 work, try step 2
   
  Step 2:
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Method 2:
   
  If the problem persists, you can uninstall service pack 2, put the computer in start state in minimum mode, and then reinstall Service Pack 2 and see if that helps.
   
  Step 1:
  
  Perform the system restore and go back to a date when Service pack was not installed on the computer.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
   
  Step 2: Put the computer in a clean boot state.
  Here is the link:
  http://support.Microsoft.com/kb/929135
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Step 3: Download Windows Vista Service Pack 2 here:
  http://www.Microsoft.com/download/en/details.aspx?ID=16468

• while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. .

  while trying to install sketches of painter Corel on 32-bit Windows Vista, I get the message of the CXML File() - > could not IID_iXMLDocument2 instance. After the closure of this msg several times I get the message .xml configuration could not be loaded. This may indicate that the file is corrupted. I tried downloading the software and the software disc and get the exact same message. Does anyone have any ideas as to what is happening and how to fix it?

  Hello

  ·          You have an earlier version (trial version) of Corel painter, installed on the computer?

  Step 1: If you need to uninstall the trial version and then try to install the full version of Corel painter.

  See: http://www.corel.com/servlet/Satellite/us/en/Content/1248977106333

  Step 2: I also recommend you contact Support Corel to this topic and see if they have a solution - http://www.corel.com/contactus

• 32-bit Windows Vista is installed on the Satellite A210 - 10 c 64-bit processor

  Hello

  I bought satellite a210 - 10 c with amd turion 64 X 2 processor, but I determined that I have * 32-bit * windows vista preinstalled. Does anyone know why?
  Could I get the 64 bit instead of 32 bit version?

  > have 32-bit windows vista preinstalled. Does anyone know why?

  May be due to the fact that all supplied laptops computers Toshiba have pre-installed 32-bit OS.
  It s is not serious if it s Windows XP or Win Vista. The two operating systems installed on Toshiba laptops are 32-bit!

  > Could I get the 64 bit instead of 32 bit version?

  You can buy a 64 bit Microsoft OS, but you won't get an OS 64 - bit of the Toshiba.

  Concerning

• acquire at 800 Mbps with avt pike on 64-bit Windows Vista

  Hello forum,.

  I'm using labview 2010 (32-bit) on a 64 - bit windows vista system (Yes, I didn't improve my labview soon) and I have an AVT pike f023b camera connected via a firewire 1394b port.

  Before, on a system 32-bit, I could acquire using 800mbps buspackage AVT, but it does not work with 64 bit systems.

  does anyone know how to get 800mbps with Pike camera using labview?

  Thank you.

  Veritas

  If you are using a 3 rd-party with IMAQdx bus driver (no doubt so things like 800 operation will work under Vista), you must contact that provider to see if they have a 64-bit version available. Otherwise IMAQdx will use native drivers in the OS provided for the bus interface. The drivers provided by the OS does not support 800 on Vista, but they do on Windows 7.

  Eric

• Windows Vista computer Internet

  I have a windows vista computer, about 7 years or more. The internet worked fine, then I restored my computer to factory. I can't connect to the internet more, I think I need to update my computer but I can't do with Internet. I tried to manually update the internet card by my laptop window 10 but I can't do it yet. I also have a map of the internet 2.0 Wireless usb. that no longer works. Sometimes with connections wireless and when I type the password in the unable to connect to this network said. so I uninstalled this card. and when I try to use a cable to connect, it connects but no internet access there. any ideas how to solve this problem?

  Open Device Manager and look at the network cards.  What cards are present and they have their drivers, or they are in the wrong with a yellow! the brand?  If no network adapters are present, it may be listed as an unknown device without driver or a network controller.   Device - Manager find unknown devices

  On the other PC, see the page Web of Support downloads for the PC model to download the network card on a flash key you are using (Ethernet or wireless).  Transferer transfer on the Vista PC, install the adapter and see if you can get online.  If there is more of a network LAN driver is draw in Device Manager, the machine using material identification or download them all and try to install one at a time.

  Do the same for all the other pilots missing in Device Manager.

  Once online, speed up Windows updates in order to conform to the date that they ceased to support Vista.

  Report all results.

• We tried to upgrade our 32-bit windows vista system to Windows 7 32 bit

  Separated from this thread.

  We tried to upgrade our system to 32-bit windows vista to windows 7 32 bit and find no right answer to what we have to do to upgrade to windows vista 32. So far, our experience is our head is ROTATING and can someone help us?

  First of all, make sure that your PC meets the requirements of Windows 7 - system Windows help

  You can buy Windows 7 from one of the major retailers who still like mainline, new egg, or Tiger Direct - Amazon but none is smaller that that if you want to be sure to get the real and not renovated or eBay!  If in doubt ask here before you buy, read the comments of the sales page for the experience of others.

  Once you have the disc, put it in the drive to make an update install with Windows 7 .  If you have a Vista factory install I would firstly follow these same steps to Clean Up Factory Bloatware that will optimize for a better upgrade.

  If this facility is not satisfactory, then do the vastly superior clean reinstall Windows 7

• Download error - cannot download anything on the windows vista computer.

  When I try to download anything, it says that Windows cannot find 'C:\Users\Admin\Downloads\shockwave_Installer_Slim.exe '. Then he said, make sure you typed the name correctly and then try again. I hope you can help me.

  Original title: download error

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  It seems that you have problems with downloading files on the windows vista computer.

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would appreciate if you can help me with the following information.

  1. what browser you use on the computer?

  2. What is the exact full error message?

  3. don't you make changes on the computer before this problem?

  4. deal with this problem if you try to download all files from online?

  If you do this in the face of Internet Explorer help, I suggest that you should change the default download location and check if it helps.

  Method 1

  In internet explorer, you can change the default location.

  Here's how:

  a. open internet explorer.

  b. click on Tools , then select view downloads.

  c. downloads for window, click Options.

  d. now, enter the default download location and click on the OK button.

  Turn on the computer at the beginning of boot and check if the problem persists.

  Method 2

  Perform a clean boot to see if no third-party service is causing the problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: follow step 3 to reset the computer to start as usual after the boot process.

  For your reference:

  Windows Internet Explorer 9 Download Manager using

  http://Windows.Microsoft.com/en-in/Windows-Vista/using-download-manager-in-Internet-Explorer

  Response with more information to help you.

  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

  RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

  Hi I'm new to these fornums

  I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

  I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

  The product key you entered will not work with this edition of Vista

  I know that most people are trying to say to activate by phone, but this option is not available

  Help, please

  Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

• my windows vista computer will not except the automatic updates and the system starts it configures only the updates

  original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

  my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

  Hi Glennisidore,

  Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

• I have a windows vista computer and I forgot the password which he

  Original title: confused user

  Hello

  I have a windows vista computer and I forgot the password for it. I did a disk from rest of password for this computer.so, I used a disc to reset windows 7 and I have an error occurs whenever I have reset the password. What should I do?

  A Windows 7 reset disk does not work with Vista.

  What to do if you forget your Windows password:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Microsoft's strategy concerning lost or forgotten passwords:

  http://support.Microsoft.com/kb/189126

• I accidentally deleted the directory "C:\Program Files (x 86) \Microsoft ' my 64 bit Windows Vista system. How can I get it back?

  I accidentally deleted the directory "C:\Program Files (x 86) \Microsoft ' my 64 bit Windows Vista system.  How can I get it back?

  original title: C:\Program Files (x 86) \Microsoft

  You can try this program:

  http://www.filehippo.com/download_recuva/

  Use the deep Scan option. It may take some time.

  The System File Checker can repair some of the files in there, but probably not all.

  It's probably at least some of the files that have been overwritten. so I would say the the more safe thing to do is to reinstall Windows.