Backup to win 8 OS?

Similar Questions

• Is APC battery backup compatible win 7 Home Premium

  Is APC battery backup compatible win 7 Home Premium

  I have:

  HP Omni 220-1180 QD

  Win 7 64 bit

  Win 7 goes to sleep when idle for 20 min., by default. I downloaded the latest software for the home, 3.0.2 inverters

  I had some repair work done recently because it was defective and I wanted to just make sure that I wasn't the problem.

  Almost every UPS aka backup battery is compatible with all computers with any operating system.

  Please send Bravo

• Delete the partition backup - install WIN media with key?

  Hello!

  My acer backup partition is removed. However, I backed up the key from the BIOS before you remove it. Can I download ISO 10 win from Microsoft and install it with the same key?

  If this is not the case, how do around him? I have a legitimate key/purchase, but the system partition backup original is deleted.

  Thanks for the update. Looks like you will have to re - install windows 8.1 first using the links I gave you.  Good luck.

• After re - install Win XP, unable to restore backup files

  I used the utility to backup under Win XP Pro, Accessories System tools to backup my C drive on a hard drive portable.

  A virus destroyed my boot Win XP system.  A store of the local computer could not fix my computer, therefore, he re-installed Win XP Pro.  In the newly installed Win XP Pro system, I tried to restore the backup files, but failed.  I received message: "the backup file contains unrecognized data and cannot be used.

  Please suggest what I'd like all my children pictures/videos and last year 10 tax records are in the backup file.  Thank you.

  Sonny Z

  Hi all

  I found the solution to my problem - cannot restore Windows XP backup file (BKF) files.

  Site Web Sysinfo Tools offer tools to repair/restore BKF utility.  In my case, I got the program of BKF recover V2.0.  Program works on all versions of Windows (up to Windows 7).

  BKF recovery program reads Windows XP generated backup file, repair and then restore the files, very fast and efficient.

  Site is:

  Sonny

• WIN 7 backup does not properly

  Hello

  I have WIN 7 Home premium (upgrade from VISTA) and using hp laptop. I back up using WD external drive. Backup shows as successful, but check the files looks like it's unwanted backup. File extensions are. Z01. Z02, etc..  The file compressed and the catalog is empty. Could you help?

  Thank you.

  Maltesem

  Hello Frederik, Im using external WD drive 3200 ME - 01 and backup on WIN Backup and Restore software on the computer.

  Maltesem

  The Windows backup tool is called from here:

  

  It generates files backup and files like so:

  E:\ACORN\Backup Set 2015-01-29 230727\Backup files 2015-01-29 230727\Backup 1 zip files.

  What you say seems to disagree with how the native backup tool works.

• 11g win backup restore to 11g oel

  Hello

  I have 11.2.0.3 db on win 7 and 11.2.0.3 Oracle Unbreakable Linux 6.7 software

  and I'm planinng of installation Data Guard between those two so the DB on win 7 is the main and

  on Linux is data custody.

  I can do it like this:

  (a) to perform rman full backup on win 7

  (b) move files of rman for linux 6

  (c) restore those files on the 11 g linux server instalation

  (d) set up dataguard

  Build, it works?

  What about the datafile, redo the location of newspapers?

  I have to make some changes?

  There are several ways to do this-starting http://gavinsoorma.com/2011/11/oracle-11g-cross-platform-active-standby-windows-primary-database-and-linux-active-standby/ or http://oraclehariprasathdba.blogspot.ie/2013/03/oracle-11g-cross-platform-active.html

• HP backup on computer

  Upgrading to Windows 7 from vista. I can crush the HP of Vista backup for Win 7 backup?  Do I have to reformat the partition?

  Mangomama wrote: upgrade to Windows 7 from vista. I can crush the HP of Vista backup for Win 7 backup?  Do I have to reformat the partition?

  Hello Mangomama, sorry to say that can't be done. The HP Recovery Restore partition can not be changed in any way and always serve later.

  If you want to or need to partition D: factory with Vista and all your other software preloaded, you can delete this partition and recover the capacity of this partition.

  If you have the game to restore HP Recovery disks, you can remove this partition and at a later time you ever wanted to put the system back as it was during the expedition, you could use the game of disc HP Recovery restore and restore the system to factory State.

• Win XP and Win 7 formatting issues! PLEASE, NEED HELP AS SOON AS POSSIBLE THANK YOU!

  OK, I made the mistake to download Win 7 Ultimate and install it on my Dell on XP. Bad idea. It could not pass the Windows Genuine Advantage, that it crashed and do not reboot Windows 7. I ran my backup on Win XP with SP3, install (XP) under C:\WINDOWS.old and kept the Win 7 files that I needed, my personal documents. Win 7 was in C:\Windows. I had my documents Ok, but how do I get rid of Win 7 files? Format? There is no dual boot option, such as Win 7 crashed my Dell and are basically sitting there too much space. I ran XP after installing 7. If I format, it will have negative effects on my computer? If it screws with my Dell somehow? ANSWER PLEASE THANK YOU SOON VERY IMPORTANT!

  System information:

  Dell OptiPlex GX280

  32 GB hard drive

  512 MB of RAM

  Operating system: Win XP with SP3. I want to get rid of Win 7 files.

  PLEASE PLEASE PLEASE RESPOND AS QUICKLY AS POSSIBLE, IT IS VERY IMPORTANT! PLEASE AND THANK YOU VERY MUCH!

  Asked and answered already in the other thread, you did in the forum Hardware & drivers here:

  http://social.answers.Microsoft.com/forums/en-us/xphardware/thread/995bd013-A458-4B3A-A546-e113187ff934

  Please, do not separate posts on the same subject. It's just more work for people who are trying to help you.

  MS - MVP - Elephant Boy computers - don't panic!

• Win 7 64 bit... HP Pavilion dv-7... Creating recovery discs... Years later... Problem of recovery?

  Discovered that I never did the recovery disks when I bought the HP Pavilion dv7-4073nr Notebook running Win 7 64 bit.

  Now, because Windows Updater does not work, some programs do not work.  (Have no idea, when he started).

  QUESTION... -What makes the recovery discs now, cause recovery issues when I do an "upgrade on the spot", as recommended by a cat of Microsoft tech?

  There is no virus, the tech ran remote diagnostics and confirmed what I already knew... Windows Updater is corrupted and are not accessible.  Bought a 3 TB external drive and have spent - hours and hours - backup with Win 7 Backup & Recovery tool and the Seagate dashboard. (Redundant).  I can NOT apparently make an Image of the 'system' (failed to backup MS 5 times... So I created a backup successful without it.  Then tried to just an image of the system and says there are files corrupt on C drive.  Has managed to create a system repair disc.  Since then, I try to understand what I'm going along, Kind ' needs to know about the recovery discs, I do now works, or if I'm just recreate the same problems?

  Thank you

  Diane

  Make recovery discs now lets start the laptop and do a fresh install.

• Windows 7 backup does not work after upgrade Windows 10 and Windows 7 restore

  I am on Windows 7 (Win-7) for several years and I'm quite happy for Win - 7.

  Microsoft has improved my Win 7 to Win - 10 at night. I refused the upgrade and Microsoft restored Win 7 on my computer. Win - 7 works very well except the backup.

  The backup is not one that I used previously.

  PIC - 1 appears when I backup implementation.

  PIC - 2 appears when I press Next

  PIC - 3 appears when I press Save

  How to restore the backup of Win - 7?

  PIC-1

  

  PIC-2

  

  PIC-3

  

  You have not answered my previous message.

  Please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  Please download and share with everyone a new copy of your log applications of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the Application log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window expand Windows logs and select Application. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Win 7 repair disk does not start

  H8 1380 t CTO, Intel i7 3820 processor. 10 GB of DDR3 Ram PC3-12800 memory. FRIEND bios (UEFI), Version 2.14.1219 (current).
  Pegatron Motherboard-IPIWB-PB (Pittsburg) Audio Beats. AMD, the Radeon HD 7570 1 GB graphics card.

  I need some advice:

  Can you direct me to a HP solution or tell me what I'm doing wrong?

  I opened Control Panel - backup and restore and set up a backup schedule Win 7. Created a backup drive, and according to the instructions, a system image on a separate hard drive. This has been created successfully.

  I have so successfully by the operating system, created an ERD in Windows 7 bootable, the screen guests said that this disc could be used to start the computer when you cannot start the operating system due to serious errors. This disk allows you to restore the system from a system image created using backup and restore or use other recovery tools to correct the problem that prevents windows from starting.

  The system does not start on this disc. I did two restorations of the factory and went through the steps above, five times without success.

  When you try to start the system with the Windows 7 repair disk the following steps were taken:

  1 Win7 disc repair, system rebooted, you press ESC, selected the Boot Manager, select DVD disc and received the following message: boot nonsystem disc error.

  2 rebooted system. escape, Startup Manager, then selected sata2 with no luck. Same error message as in (1).

  Thank you

  Hi Dave,.

  Thanks again for your help.

  Bought a WD a terabyte HD Executed a copy sector by sector, using Paragon... It was quick (about ten minutes-amazing) and I answer to you, now, using the WD HD clone.

  Awesome! I finally took possession of this computer.

  I would say that the problem has been resolved. Windows 7 repair disc will not work on EFI systems and here's workaround.

  Thanks again.

  Jack

• Remove Win 8 and reinstall Win 7

  I want to buy a new PC only supplied with Win 8 pre-installed, and I would like to replace it with Win 7 (32-bit, I can upgrade to 64 - bit later if I can do it) and avoid having to re - install all my software application.  I was wondering if the following actions are possible and would result in a system that works with Win 7.

  (1) use Windows Easy Transfer to save on everything, to install Win 7 on my drive purchased copy (not an upgrade), to restore from the Windows Easy Transfer.

  Or

  (2) create a system image on an external USB drive (I do already this week as a backup), install Win 7 on the purchased copy, then restore from system image booting from a system repair disc.

  Or

  (3) just boot from a system repair disc and restore by using the image of the system on the USB.

  I guess I have to contact MS support to change the license for the new PC.

  It would be necessary to reformat first at a low level to remove all partitions created for the installation of Win 8?

  None of the tasks you describe can achieve what you want - it will have to reinstall all your applications.

  1 easy transfer is simply a tool for transferring system settings not nothing else.

  2.3 an image restore restores the system drive in the State in which it was at the time wherever the image was made.  Restore an image completely replaces the contents of the drive.  Restore an image restores the operating system in use when the image was made.

  2, 3 [more] in case you considered the use of the image of your Win7 existing to restore to your new computer, you can usually not an image on a system and then restore it to another [as a way to avoid the installation of the application] that all pilots of the system component will be wrong and the system may not work quite well with bad drivers to allow you to work through update drivers for good.  Acronis TI 2015 says he can manage this process and the claim might be true, as far as I know.

  If you install a 32 bit OS and you subsequently install a 64 bit OS [assuming that your system can handle], change requires an installation not complete an upgrade which will overwrite the system drive.

  Given the delays, you might well be better off waiting for Windows 10 be released and then upgrade your computer to this new operating system.  Alternatively, if you can wait a few months, you could buy a new computer with Windows 10 already installed.

  If you are determined to install Windows 7 so be very careful who you buy from that there are a lot of fakes for sale.  Amazon would be a cheap but reliable supplier Amazon, eBay and a stall in your local market may not be.  Buy from someone you can count on to complain to in three years if the licence proves to be invalid - these sellers would not likely to sell you a fake in the first place.

  Change a BONE *, it's always a big step.  Among your preparations should be checked only

  1 the PC manufacturer provides drivers for the 32/64 bit OS you want to change

  2 the manufacturer of material for your devices [your printer and scanner] provides 32/64-bit drivers for the operating system you want to change

  3 your application software runs in your desired 32/64 bit OS.

  * The move from a 32-bit to 64-bit OS would be as serious because if you think about that, for example, drivers unable to your material even if 64-bit 32-bit drivers are available.

• My Windows Media Center 12 disappeared from my Win 7 home premium.

  I searched all files in each folder and can't find it anywhere. How can I download and reinstall. I do not have a backup

  Win 7 was one installed at the Dell factory. I continue to say it comes with Win 7 Home Premium, but nowhere I down can it load again

  Hold down the windows logo key and press the R key,

  Then copy and paste this in the box and good.

  %windir%\ehome\ehshell.exe

• CustomRefresh.win

  I have a CustomRefresh.win that is 10.5 GB which of course was created when I upgraded to Win 8 (based on the "update").  If I read it correctly, "Refresh your PC" to win 8 uses this file (http://support.microsoft.com/kb/2748351?wa=wsignin1.0).

  I have two questions.

  1. because it appears that the file has not been updated for 6 months, do I really need?

  2. If I make a new Refresh personalized to reflect my current setup, it just overwrite the old?

  Since it is something new to me, I don't want to mess with it without a fair idea of what he will do.

  I tried the other backup features Win 8, but they want more space I have available. This sounds like it would give me anything I want in less space. However, the summary is a bit vague.

  Hello

  You must keep a continuously updated CustomRefresh.wim file.

  The reason is that if you use the file that was originally created when installing Windows 8, you will lose all your programs and applications that were installed after Windows 8.

  If you create a new file, all programs and applications that have been installed up to the date on which the file is created will be part of the update when you use this option.

  It is a recovery option to have excellent disaster.

  See the following topics.

  To create a custom Refresh Image, perform the following steps.

  Important: Quit all running programs. If you are using a portable computer, plug the power adapter while you create the image.

  1. press theWindows key + X to display the System menu and select thecommand (Admin) prompt.

  2 in thecommand window, type the following command.

  recimg.exe /createimage C:\RecoveryImage

  Press enter.

  (Note the 2 spaces in the command)

  The process of creating displays 4 steps.

  Initialization - 100%

  Creating snapshot - 100%

  A picture writing - 100%

  Saving Image - 100%

  
  Note: drafting stage will not start immediately and will take about 30-45 minutes to complete, the other 3 stages are very fast.

  Once the command has completed, open Windows Explorer and navigate to the C:\RecoveryImage folder. You should see a file named CustomRefresh.wim.

  It is recommended to create an image of custom occasionally refresh to update changes made to the computer.

  Source:

  Refresh and reset your PC - Building Windows 8:

  http://blogs.msdn.com/b/B8/archive/2012/01/04/refresh-and-reset-your-PC.aspx

  Concerning

• VCB backup snapshot or virtual machine?

  Hello

  Workflow of VCB, I read these procedures frequently and I'm confused by what backup software is stored:

  ".....  Put the virtual machine snapshot mode and take a snapshot.

  .. .Mount snapshot of the VM for the proxy backup (to win)

  .. software backup .the performs a regular backup of the snapshot of the virtual machine moving data from backup media... »

  So I wonder what backup software is saved: any virtual machine or virtual machine snapshot? and why?

  And for linux, it will export (copy) the snapshot of the machine the VCB proxy virtual of the SAN. If a single snapshot is stored to the proxy of VCB mount point, why VCB proxy must have enough space to contain the largest virtual machine?

  Can someone give me some clarification?

  LAN

  To clearify:

  In the world of VMware ESX, a snapshot is the same as the 'entire virtual machine' as you say. It's just the disks 'frozen' in a State of know. VCB can then move up and back up this disk (or copy it to the VCB proxy) while the virtual machine is placing the changed data in the temporary file. Some people refer to this temporary file that the file 'snapshot', while the other, see you in the frozen file as the 'snapshot' file, and creates confusion for users/students. A 'snapshot' is simply the functionality described above.

  When the backup action is finalized, VCB tells vCenter to "remove the snapshot" which actually means that the data in the temporary file are merged with the 'frozen' disk that is then back 'defrosted' and put into live operation.

  / R