bad configuration in the registry for a TSST corp CDDVDW SH-S2333C ATA device, how can I fix?

Similar Questions

• Driver TSST Corp CDDVDW TS - L633L ATA Device will not load. The problem code is 19 / how to fix?

  HP Pavilion dv4
  TSST Corp CDDVDW TS-L633L ATA Device

  Control Panel / problem report and solutions
  Problem: Could not load software driver status: sent report

  Description
  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 19.

  Signature of the problem
  Problem event name: PnPDeviceProblemCode
  Architecture: x 64
  Hardware ID: IDE\CdRomTSSTcorp_CDDVDW_TS-L633L___0400___
  Configure the class GUID: {4d36e965-e325-11ce-bfc1-08002be10318}
  The PnP problem code: 00000013
  Driver name: cdrom.sys
  Driver version: 6.0.6002.18005
  Driver date: 11/04/2009
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  Additional information about the problem
  Bucket ID: 619663520

  Control Panel / Device Manager
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried:
  Update driver software
  Uninstall / find the hardware changes
  Uninstall / reboot / new hardware found
  Properties / verification solutions

  How can I fix it?

  Hello

  Try to follow the procedure at the title of the subheading "Let fix me it myself" on the link below to delete the upper and lower filters and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  You have to restart the laptop after that.

  Kind regards

  DP - K

• Reinstall for TSST corp CDDVDW TS - L633B ATA device

  I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

  I have the yellow exclamation mark beside TSST corp CDDVDW TS-L633B ATA cd/dvd drive device, I ran a fix, but it tells me that I need to reinstall. How can I do this? The cd player has always been very sensitive. Sometimes, longer works once not.

  Here is the solution to update your device with the latest driver of Toshiba/Samsung.

  Introductory material.

  
  

  1 here is the update for TSSTcorp CDDVDW TS-L633B ATA DEVICE.

  2. There is a update for the Samsung TS-L633B, but there only version SC01, which WILL NOT be updated the version of the TS-L633B HP because HP version is 0301 with an OEM Code of HM.

  3. However, Samsung has renamed TS-L633B with a new device driver ATA which is called SN-S083B and has a pilot SC02 update.

  4. the way that you update TS-L633B Code 0301 Version with HM Code OEM with the new Samsung SN - S083B Version SC02 Code is to patch the file and flash TS-L633B HP with the patched file.

  Instructions.

  
  

  IMPORTANT - THIS ONLY REFERS to those who have the HP TSSTcorp CDDVDW TS - L633B ATA Device - check device manager to make sure that you have this model number device driver before you start - YOU DO THIS at YOUR OWN RISK. Proceed only if your product is not guaranteed and do not wish to pay for another DVD player.

  1. click on the following link and download the firmware SB02. Global Distribution of SN-S083B: http://www.firmwarehq.com/download_1380-file_SN-S083B_SB02.exe.html

  2. If you don't have a utility program unzipped, click on the following link and download and install 7zip that corresponds to your computer from the following link: http://www.7-zip.org/download.html

  The BIN SN-S083B unzip using 7zip by right clicking on it and choosing 7ZIP > extract here.

  3 download the Flash Samsung Standalone utility:

  http://www.samsungodd.com/KorLib/file/tsdnwin.exe

  4. download and unzip http://ala42.cdfreaks.com/MCSE/MediaCodeSpeedEdit.zip to ala42 MCSE

  Download source: http://ala42.cdfreaks.com/MCSE/

  5 create a folder and name it FLASH and place the following 3 items in the folder.

  SN - S083B_SB02.bin that you have checked out

  Flashing Samsung Standalone utility

  MCSE of Ala42 you have downloaded and extracted the zip file

  6. After you have placed all three objects in step 5 in the folder named FLASH, place the FLASH folder and all of its contents in the C drive.

  7. After placing the FLASH folder in C drive, open the folder and CLICK on RUN AS ADMINISTRATOR and ALA42 MediaCodeSpeedEdit.exe RIGHT.

  8. when ALA42 MediaCodeSpeedEdit.exe opens, click the LOAD button and place you in the FLASH folder in C drive and load the file SN - S083B_SB02.bin - when the file it load it will show all of its regions.

  9. once the file SN - S083B_SB02.bin is fully loaded, place a check MARK in the area of CPR1 in the lower right of ALA42 MCSE.

  10. After putting a check in the box by ALA42 MCSE CPR1, click SAVE in the upper right and save the file in the file FLASH as SN - S083B_SB02_speedpatched.bin.

  11. now go to START > all PROGRAMS > ACCESSORIES > COMMAND PROMPT and right click on command prompt and choose RUN AS ADMINISTRATOR to open the command prompt in the Administrator role.

  12. once the command prompt opens, type the following command: CD C:\FLASH and press the ENTER KEY.

  13 after hitting the button enter, the command prompt should read FLASH.

  14. to the FLASH command prompt, type the following: nocheck tsdnwin and press the Enter button to open the flashing Samsung Stand Alone.

  15. when the flashing Samsung Stand Alone opens, click on the on button SEARCH and navigate to the file 'SN - S083B_SB02_speedpatched.bin"to load it into Samsung's Flash utility.

  16. the file "SN - S083B_SB02_speedpatched.bin ' will load and click on DOWNLOAD to start flashing your TS-L633B ATA Device.

  Wait until the flash is finished and when it finishes, it will ask you to restart the computer and you must restart.

  When you rebott and are back at your desk, Windows will recognize the drivers for your TS-L633B ATA Device and install the new drivers SN-S083B_SB02.

  When it finishes installing your drivers, restart the computer once more, and then you're done.

  NOW ENJOY your CD/DVD-RW drive updated.

• TSST Corp CDDVDW TS-L633M ATA Device

  My cd/dvd-rom does not work! I did all the patches... uninstall it from the Device Manager and restart the computer; delete upper/lower case filters in the registry. Update device drivers; computer brought to the factory settings; Restore at a better time; Reinstall the software; etc, etc, etc! So, in properties, it says my file system is unknown, but in the State of the device it says that my device working properly in my HP Advisor it says my drive (E :) is empty bay... it wont read/write/open/discovery/or do something... Please help will stir crazy!)

  Oh yes, I have Windows Vista and you have not updated my operating system or whatever it is, the last time it worked was two months ago. THANKS :)

  Hello

  ·         You are using a desktop computer or a laptop?

  The issue that you are facing may occur due to the static energy storage in the computer. I suggest a system power cycle and check if it helps:

  1. disconnect any external devices to the laptop.

  2 remove the battery from the laptop.

  3. press the power button of the laptop for 10-15 seconds.

  4. Insert the battery in the laptop and restart the computer.

  5. check if the DVD player works fine.

• Satellite A200 - TSST corp CDDVDW TS - L632H ATA Device no work

  I'm not the most computer savvy person so I need a little help.

  The device status says:
  + This device cannot start. (Code 10) +.

  It also tells me click + "search for solutions ' +. When I do a pop up appears and says that Windows does not load driver software.

  Any help is appreciated.
  In addition, under Vista.

  Thank you
  Lucas

  This can occur when you install the CD/DVD software not designed for Vista. For example if you install iTunes v6 for XP, it can load a filter incompatible Vista driver and cause problems.

  Try to remove the UpperFilters and Lowerfilters. Sollow this guide: http://support.microsoft.com/default.aspx?id=314060

• I bought Adobe Creative cloud. for the audit, he sent an email that is not mine. How can I fix this problem as I triend to go to my profile and until now I can't download my phtotshop and I got the approval for my pa

  I bought Adobe Creative cloud. for the audit, he sent an email that is not mine. How can I fix this problem as I triend to go to my profile and until now I can't download my phtotshop and I got the approval of my payment

  Hi Christophe,

  Please refer to the threads below where the issue has been addressed:

  CC has a fake email, can not change

  confirm/verify e-mail addresses for CC subscriptions

  Kind regards

  Sheena

• When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix i

  When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix it?

  You set the font size to a size that is suitable for the size of the document.   Size of the document may vary everywhere.   To resolve this problem in action, I solved in scaling the document to a known size then use a font suitable for a document of this size.  When you resize an image using size with resample Images not only checked a single pixel is change everything that is changed is the DPI image resolution setting.  So if you size a picture 8 "wide you choose a font size is good for wide image 8" the Save action.  To work around the problem of changing the size of the printing I wrote a Script to use in such an action.  The script is used twice, there is a backup and restore script.   The first time that the script is used the script records the resolution DPI images in the metadata documents.  The second time that the script is executed, it retrieves the registered PID parameter deletes the record of metadata from images and set the DPI images that had been saved.    If the use of fonts for the document 8 "will be resized to fit the print original size.

  In a script, you can calculate a correct font size to use.  Actions cannot retrieve information or use logic. They need to use the Plug-ing and Script where logic is needed.  When you make using Photoshop UI you use your eyes and brain.

  Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
  Contains

  • Action Actions Palette Tips.txt
  • Action creating Guidelines.txt
  • Action dealing with Image Size.txt
  • Strengthened through scripts functions.txt Photoshop action
  • CraftedActions.atn sample Action set includes an example of Watermarking action
  • Sample Photoshop Actions.txt CraftedActions the value stored in a text file.
  • More then a dozen Scripts for actions

  Example of
  Download

• pit stop halfway through the installation, my creative cloud just prosess mounting on my mac, how can I fix this?

  pit stop halfway through the installation, my creative cloud just prosess mounting on my mac, how can I fix this?

  Hi Jacco,

  Please see:

  Re: adobe creative cloud Office installation does not install.

  Creative cloud Installer hangs

  I hope this helps.

  Concerning

  Megha Rawat

• When I try to log in my account, I get the message "a network error occurred while trying to connect.  How can I fix it?

  When I try to log in my account, I get the message "a network error occurred while trying to connect.  How can I fix it?

  Hi Mark,

  Are you trying to connect through Adobe Reader? If so, what happens when you connect via the web interface at https://cloud.acrobat.com?

  (We had reports of this error occurring in the latest version of the reader.)

  Best,

  Sara

• Address IPCONFIG auto cannot locate my Ip address. Other computers on the WIFI at home have problems of "IP address conflict address" How can I fix

  Auto IPCONFIG can find 169. addresses. My IP BigPond do not answer to 169. I force the IP to get internet now. I'm trying to return to power enable all desktop computers 3 and 5 laptops (all windows) to use WIFI that we used to be able to 2 months ago. BigPond advise me to get in touch with Microsoft on 132058 and I can only do this Mon - Fri 9.00 - 5.00 which is extremely difficult so that an employee who works 12 hours. After hours of contact would be much more preferable. How can I have my computer 'automatically' identify my IP without forcing the numbers. When I force the IP on the other computers on the home WIFI network they can not access the internet due to a "conflict with an IP address. They should automatically be able to identify and define the same IP address as the primary computer without problem. How can I fix?

  It seems much more likely that the fault is in your TG782T on Windows.

  Either way, a 'normal' router will work with many more than 4 Ethernet ports (though most only have a maximum of 4 physical Ethernet Sockets) and more than 5 wireless connections.  It is therefore likely that your ISP has "customized" your device in a way that limits the number of connections - and it is probably this "customization" that gives you your current problems.  It will be a little difficult to do this via an Internet forum (rather than sitting in front of your computer), but it should be possible.

  Please specify the following sentence: "disconnect this computer and try a new computer is always the same problem as the gateway must always have this setting, this computer in IP."  What is "this setting of intellectual property?

  In the area of local connections > Internet protocols (TCP/IP), how is the 'work' computer configured?  Normally, it would set on "Obtain an IP address automatically."  What was the setting of 'alternative' that your ISP you are trying?

  The first thing to do is to get information on your work computer.  Follow these steps:

  1. click on start, and then type the three letters cmd in the run box, and then click OK.
  2. Enter the following command and press ENTER:
  ipconfig/all > "% UserProfile%\Desktop\ip.txt" {Enter}
  3. open the IP.txt file to your desktop
  4. copy and paste the text into your response.

  One of the lines in IP.txt will be something like the following:

  ... Default gateway. : 192.168.1.254

  This number is the IP address of your router.  Open a web browser (Firefox or Internet Explorer) and enter the IP address of your default gateway in the address box.

  At this point, it is possible that it will ask you a user name and password.  If you did not one, use admin as username and leave the password empty box.  If this does not work, there is a way around this, but it involves several phone calls from your ISP.

  Unfortunately, the only manual for the TG782 I could find is terribly incomplete. http://www.thomsonbroadbandpartner.com/GetFile.php?id=6978

  After login, you should see a page with a menu on the left (see p. 26 of the pdf above thomsonbroadbandpartner).  Click on the entry for "Home Network."  Unfortunately, the manual does not show the screen that appears when you enter this part of the configuration utility.  What you are looking for are the settings for the DHCP server on the router, which assigns IP addresses to computers connected to the router (no matter if they are connected by wire or wireless).

  Because the manual for your TG782T is not describe it, take a look at this, which is a part of the Linksys WRT54G Router configuration utility:http://cid-18b259158254905b.office.live.com/self.aspx/.Public/router%20setup.jpg

  Under the Network Configuration, the local IP address is set to 192.168.1.1.  On your router, the default value for this entry is 192.168.1.254.  Just under which are entered for "DHCP Server" "" starting IP address"and"Maximum number of DHCP users."  Here are the settings that you want to search.  The two critical parameters, as regards your current problem is are (1) the server DHCP must be "enabled" and "(2) the number of DHCP users Maximum" must be equal to or greater than the total number of computers that you want to connect (wired and wireless).

  Sorry I can't give you more specific instructions.  Usually, the user guide for the router will display all the available screens in the router configuration utility... but not this one.

• New Mac synchronize collections from the existing collections of light room Mobile, what is happening? How can I fix it?

  I created an account of lightroom through my iPad and iPhone.  No problem with lightroom it or the PC I have.  Well, now I have a MAC and got the cloud creative apps lightroom and photoshop on it.  Open the ambient light and there is no file not found.  All he wants to import comes from the local disk.  I tried to click on synchronize with mobile and invites me to "remove all synchronized data?

  It also States:

  "Lightroom allows you to synchronize a single mobile catalog with lightroom.  You currently sync "Lightroom Catalog.lrcat".

  "Do you want to delete all the data synchronized with Lightroom Mobile and synchronize this catalog instead? This will remove all data mobile Lightroom to your mobile devices.  It deletes all the pictures stored on your computer. »

  I don't want to delete what is currently on my mobile.  There is no data on the Mac store.  That's what I'm trying to add mobile.  I want that all my data on mobile that I can't see on the two iPad iPhone no problem, to be opened on Mac.  How can I fix it?  Any help is greatly appreciated.

  Thank you!

  Just Shoot me wrote:

  LR mobile works only with a computer and a single catalog on a computer with several mobile devices, phones and or platelets running iOS or Android.

  You cannot synchronize 2 different computers with LR mobile even if you use the same catalog on both computers. Whenever LR opens a catalog, even the same, on 2 different computers the file gets catalog a unique identification number, and it is this identification number is used to mobile LR for the synchronization of the collections.

  Which to correct a catalog PC. You can move files in LR to keep the changes, and then copy the catalog. He got a little complicated when I tried and I found myself from scratch any movement. I ended up with double copies because I moved t bad but can be done. Thanks for all the help and tutorials, etc.

• Try to install Itunes 64-bit, get the error message that says a DLL file is missing. How can I fix?

  I have windows 7, 64 bit.  I am trying to install ITunes 64-bit Installer but get an error message indicating that a DLL file is missing.  How can I fix?

  Hello

  Welcome to the Microsoft community, the best place for all windows related queries.

  I see that you can not install iTunes 64-bit install as it says .dll file is missing.

  I suggest to download the installer once more and then try to install it once more.

  If you still experience the problem, then I recommend you view the query on the Apple support forums. Here is the link for your reference.

  https://discussions.Apple.com/index.jspa

  For other Windows-related issues feel free to get back to us. We're always here to help.

• I can't download PDFs from the internet because of an error on iexplore.exe running. How can I fix it?

  I have an error of execution on the iexplore.exe file.  The message is "the application requested execution to terminate in an unusual way.  I can't open download PDFs from the internet because of this.  How can I fix it?

  I have an error of execution on the iexplore.exe file.  The message is "the application requested execution to terminate in an unusual way.  I can't open download PDFs from the internet because of this.  How can I fix it?

  Use another browser.

  You try to view in the browser or that you get the same reaction if you right click and save the PDF file and open it directly.  If the work of the latter, uninstall your pdf reader, restart and reinstall the latest version.

• I'm trying something in the paint color, but each unique color comes out gray? How can I fix?

  I will be buying leather, and I downloaded a blank form of them and put in paint.  But when I try to color, each color comes out like gray.  My painting is broken, because when I just paint on a white sheet colours are normal.  How can I fix?

  Hello

  1. open Add/Remove Programs
  2. open Add/Remove Windows components
  3. remove paint under the accessories section
  4. repeat the procedure to add it again

  Windows will now uninstall brush. Now, insert your Windows XP CD into the drive and repeat the procedure above, but allow the paint entry in step 4 and click Next. The required files are extracted from the Windows XP CD and paint is now re-installed.

• When checking for the update of windows I get (cannot open this page). How can I fix it?

  I can't even check the update page. Page cannot be displayed. They always have the updates for windows xp service pack 3?

  I don't see a miracle for this.

  http://support.Microsoft.com/kb/971058